Quick detail Pest type: Mouse Pest control type: Swatters Feature: Environmental protection, ultrasonic Place of birth: China guangdong (mainland) Brand: N-ec Model: Yd-m1 Voltage: 220v Output power: 5w Frequency: For 20hz to 40khz Housing material: Refractory materials Size: 19 cm * 13 cm * 9 cm Colour: Black Weight: 1.2 kg Signal cover area: 50 meters in diamete Feature 1. The ultrasonic changes of the machine can not make the pests have "adaptive" and "immunity". 2. Large output and two speakers. Effective exclusion of pests. 3. New rats that can quickly and effectively drive pests cry. 4.Ac / dc dual power supply. When the power supply fails, sd-003 can be automatically powered by the rechargeable battery. 5.With metal hooks, the stall direction of sd-003 can be readjusted to obtai 6.The best effect of exclusion of pests -
Product Description Ultrasonic mice repeller can give out a kind of peculiar and strong ultrasonic wave which can irritate the nervous and audiosystem of the mouse and other pests , make them uncomfortable and unpleasant and drive them away. The pest will become listless,poor appetite and will loss their reproduction and invasion ability. 1.Production description - Working voltage:220V -Rated power output: 5W -Frequency response:20HZ-40HZ -Using range:100-200 square meter -Appearance meterials: fire prevention board -Product specifications:19*13*9cm -Weight: 1.0KG -Color: White -Characteristics:ultrasound, automatic frequency conversion no noise -Scope: 50 meters in diameter - Range of application: home, warehouse, shop, hospital, hotel, ect 2.Production operation (1).The power cord is attached in this product. One of the power cord can be connected to the mouse repeller port and another one can be connected the 220V outlet. The user can turn on the power switch after checking and ensuring. (2).The voice which You are welcome to use Yuandun intelligent mouse repeller!â?� can be played When the mouse repeller working. After that, the mouse repeller will be work with voice. (3).The meow and Mice scream can be internaled in the mouse repeller. The voice and ultrasonic can be played switching into another one. The red indicator light is the ultrasonic light and it has 2s interval. However, the green light is the voice light and it has 1s interval. (4).The user can turn off the bottom when they push the function key. If the user only wants to play the ultrasonic, they should push the key again and the voice will be played again. 3.Applicable scope (1).Except for disinfesting the mouse, the mouse repeller can disinfest the cockroach, ant, spider, cricket, bug and silkworm. (2).The mouse repeller can be used: home, warehouse, shop, hotel, restaurant, hospital and office. (3).The effective range is 200 square meters. It is based on the actual place environment. General speaking, one mouse repeller can be installed in one house, if the user can install a number of mouse repellers, it can make the best effect.
Ultrasonic mice repeller can give out a kind of peculiar and strong ultrasonic wave which can irritate the nervous and audio system of the mouse and other pests , make them uncomfortable and unpleasant and drive them away. The pestwill become listless,poor appetite and will loss their reproduction and invasion ability. Feature 1.The ultrasonic wave coming out of this machine is alternate and changeable which can not make the pests have adaptability and immunity . 2.Large output and two louer-speakers. Good effectiveness for repelling the pests. 3.Mewing & mouse crying which can drive the pests away quickly and effectively. 4.AC/DC dual power supply. When there is power failure,SD-003 can be powered by the rechargeable battery automatically. 5.A metal hook attached with which the stalling direction of SD-003 can be rejusted so as to obtainthe best effectiveness for repelling the pests. Usage 1.Mainly SD-003 can expel the mice/ mosquito . Also it can have some restraints to the following pests: cockroach, ant, spider, cricket, bug, flea, moth ,bat etc. 2.Our products can be used in the following places: family ,warehouse,grain depot, garage,shop, hotel, restaurant, hospital, office, machine room etc. 3.The effective coverage is around 300 square meter. -
1. High voltage electronic shock to kill rats, nonpoisonous, safe and reliable. 2. Power supply: 6V , 4pcs C battery (not including) or adaptor (not included) 3. High voltage: >5000V 4. High voltage produced time: 2 minutes. 5. Low battery indicator: 4.8Vï¼?/ï¼?0.2V. 6. New battery can be supplied for electronic shock 20-30 times. 7. This device suitable for dining-rooms, kitchens, bedrooms, offices, hotels, and any other places those rats usually appear.
1. Ultrasonic Mice Repeller is effective in controlling mice, rates, and most other Common pests. 2. Laboratory research has shown ultrasonic waves attack the auditory and nervous systems of most common pests causing them pain and discomfort.. 3. These high-intensity ultrasonic waves are out of the range of hearing of humans and most household pets such as dogs, cats, fish and birds, and farm animals, will not interfere with televisions, radios, electronic burglar alarms, fire or smoke detectors, pacemakers, hearing aids or other electronic equipment. Specification Material: ABS plastic Power supply: 220V AC power Power Consumption: 3-9 Watts Frequency: 22KHZ-25KHZ Effective area: 500sq.ft Unit size: 10x10x6.2CM Blister packaging size: 20.3x18.5x8.5cm Package: 20FT' : 16416PCS 40FT' : 34080PCS 40HQ: 39936PCS
Feature 1. The ultrasonic changes of the machine can not make the pests have "adaptive" and "immunity". 2. Large output and two speakers. Effective exclusion of pests. 3. New rats that can quickly and effectively drive pests cry. 4.Ac / dc dual power supply. When the power supply fails, sd-003 can be automatically powered by the rechargeable battery. 5. With metal hooks, the stall direction of sd-003 can be readjusted to obtain the best effect of exclusion of pests Quick detail Pest type: Mouse Pest control type: Swatters Feature: Environmental protection, stock, ultrasonic Place of birth: China guangdong (mainland) Brand: N-ec Model: Yd-m3 Voltage: 220v Output power: 5w Frequency: For 20hz to 40khz Housing material: Refractory materials Colour: White Weight: 1.2 kg Signal cover area: 50 meters in diameter -
Item: 5 in 1 Multifunctional Pest Repeller Size: 13* 7.5* 9cm Materials: ABS Voltage: 100-120V/ 220-240V Frequency: 30- 50kHz Working range: 200 square meters Function: ultrasonic+ electromagnetic+ ionic+ night light
PRODUCT FEATURES Electromagnetic Ultrasonic Pest Repeller has four work patterns for your choice according to different using environment Mode one with Red LED (LED 1): Electromagnetic waves Mode two with Yellow LED (LED 2): Anion Mode three with Green LED (LED 3): Ultrasonic Mode four with three LED indicator lights: Electromagnetic waves + Anion+ Ultrasonic APPLICATION: Living room, Bedroom, Kitchen, Attic, Storeroom, Hotel OEM, ODM SUPPORT
MOSQUITOES Feature: Disposable, Sustainable Place of Origin: Guangdong, China Brand Name: TOPONE Model Number: TMR20-24, TMR20-24 Packing: 240pcs/carton Item type: mosquito repellent cream Function: Mosquito Repellent Color: White Usage: Home/Outdoor/Hotel+Office+Bedroom+Restaurant Size: 20 pcs/box MOQ: 20000pcs Package: 20pcs/box 12 boxes/ carton 240pcs/ctn Payment terms: L/C,T/T,Western Union,Paypal Shipping port: XiaMen
PROTECT YOUR FAMILY FROM THE DANGEROUS MOSQUITOES AND OTHER PESTS With the help of this Ultrasonic Pest Reseller, you can protect your family and friends from Zika, Dengue, Malaria, Yellow Fever, and numerous other pests. In the pest control field, ultrasonic pest reseller is a revolutionary new technology. It is specially made for your home as well as your office. Electromagnetism Technology is used in this tool to fight against Mosquitoes, Flies Spiders, Bees, Cockroach, Rat, and Other Rodents. ULTRASONIC PEST REPELLER HAS: There are no chemical products used in this tool. Maintenance cost is very low. The machine can be used for an unlimited time duration. Easy to Understand and Use. TWO MODERN TECHNIQUES ARE USED IN THIS MOSQUITO REPELLER: First: Electromagnetic pulses are sent via the wiring in the walls of your home to create a hostile environment for pests to pack and go. Second: Intermittently the ultrasonic waves released by the device, render existence unendurable to animals such that they escape the ultrasound waves. This Ultrasonic Pest Repeller is safe to use and better than any other chemical products. PREGNANT WOMEN & ELDERLY PEOPLE It is safe for children, pregnant women, and senior citizens. It doesnâ??t harm peopleâ??s body or any other part. Are there pests living in your house, in the kitchen, between the walls, in the bedroom? Do the running around children, animals, and food? Damage to essential things and equipment?
Pest Type Mice Pest Control Type ultrasonic repeller Feature Eco-Friendly Place of Origin Guangdong, China (Mainland) Model Number LSW-321 Brand Name OEM. Electronic Repeller with SONIC Technology NO POISONS NO TRAPS NO DEAD PEST CLEANUP PLUG IN-MOSQUITOES OUT! . Detailed Description ULTRASONIC PEST REPELLER The theory: 1.Ultrasonic pest repeller is effective in controlling mice,rates, and most other Common pests. 2.Laboratory research has shown ultrasonic waves attack the auditory and nervous systems of most common pests causing them pain and discomfort.. 3.These high-intensity ultrasonic waves are out of the range of hearing of humans and most household pets such as dogs,cats.fish and birds,and farm animals.will not interfere with telecisions, radios, electronic burglar alarms,fire or smoke detectors, pacemakers, hearing aids or other electronic equipment. Applicability: Ultrasonic pest repeller is suitable in :Home and apartments,food service,Businesses,Farms and so on. Covers up to 500sp.Ft Features: The performance is stable and rapidly efficient This product is compact, convenient, low power consumption, etc. unltrasonic wave ,non-toxic ,Non-taste. Method: 1. Plug unit into socket of 220V AC wall outlet 2.when the button in the middle,that will stop working 3.When the button in the light(Variable), the red LED pilot lamp will light up indicating that emit the variable ultrasonic waves drive the pests away. 4.When the button in the right(Fixed), the green LED pilot lamp will light up indicating that emit the fixed ultrasonic waves repel the pests . 5.You can turn to different button have different affect or better affect to the pests. Specifictions: Power supply: 220V AC only 3-9 Watts Frequency range: 22KHZ 25KHZ. Attention: 1.The environment have long time nobody stay,please pull out the plug 2.That product is not waterproof,please do not used in damp environment. 3.Keep in mind the frequency waves will not travel through walls or furniture.Make sure to plug the unit into an outlet clear of surrounding object. Min. Order Quantity 2000 Piece/Pieces FOB Price USD 2~3 / Piece Port Shenzhen Payment Terms L/C T/T Western Union Production Capacity 20000 Piece/Pieces / Month Delivery Time 20days Product Type public Unit size:10x10x8.5CM Blister card:20.3x18.5x9cm GS Packing: QTY: 24 PCS N.W.: 3.2 KGS G.W.: 4.2 KGS MEAS:32.5x34.5x39cm QTY: 80 PCS N.W.: 10.8 KGS G.W.: 11.8 KGS MEAS:59x51x39cm
All-Pest Repellent Spray Twobrosrepellent is a natural insect repellent spray that effectively keeps ants,spiders,rodents,cockroaches and other bugs at bay. Made with botanical ingredients like citronella and peppermint, it's 100% DEET-free and safe for use on the skin. The non-greasy formula has a pleasant smell that won't overpower your senses, making it perfect for outdoor activities like camping, hiking, and backyard gatherings. Don't let pesky pests ruin your outdoor adventures - try Twobrosrepellent all natural insect repellent and enjoy the great outdoors without any worries. Features of All-Pest Repellent Spray Introducing Twobrosrepellent - your ultimate outdoor companion! Say goodbye to pesky pests and hello to the great outdoors with our natural insect repellent spray. Our formula is specially crafted with natural botanicals such as citronella, peppermint,wintergreen oil all working together to keep those bugs at bay. Plus, it's 100% DEET-free, so you can enjoy the outdoors without any harmful chemicals. Not only does our bug repellent spray work effectively, but it also has a pleasant smell and is non-greasy. It feels light on your skin and leaves a fresh scent that won't overpower your senses. Perfect for a day at the park, camping, hiking, or just hanging out with the family in the backyard - our travel buddy insect repellent spray is a must-have for all your outdoor adventures.
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75200 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc ( +10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80 C. When the DC panel has a temperature over 100 C, the module will stop working; when the DC panel has a temperature below 90 C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
Technical Features: 1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance. 4, According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority can be set. 5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. 6, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy �±1%. 7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 10, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%. 11, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance. 12, The controller adopts three charging stages (buck charging, equalize charging and float charging) which can maximize the utilization of photovoltaic modules and batteries 13, Solar controller adopt IGBT Modular design ensure stable and efficiency performance of solar controller and solar power system 14, The controller has perfect battery protection function and with multi-stage charging technology to improve battery life 35% at least 15, Fully enclosed duct design and high-speed fan for cooling makes the controller working under harsh environments 16, The controller has power generation statistics and real-time power curve function, so we can know power generating information at any time 17, Colorful LCD display, touching key and multi-language option makes the HMC (Human Machine communication) easy and convenient. 18, The controller also has temperature compensation function and RTC real time clock function,
Technical Features: 1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance and reduces the hidden cost of machine failure to repair. 4, According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority can be set. 5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter's usage, which reduced the cost of equipment investment, easy to connect wires and control. 6, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy ±1%. 7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 10, Wide input voltage can be set according to customerâ??s requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar/wind system without backup batteries, it can save many cost and maximization use the solar/wind energy. 11, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%. 12, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance. 13, European CE (EMC, LVD, UL1741) and ISO9001 certificates. [Optional] RS485 communication; AC bypass complementary function; Built-in charger
1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance and reduces the hidden cost of machine failure to repair. 4, According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority can be set. 5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter's usage, which reduced the cost of equipment investment, easy to connect wires and control. 6, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy �±1%. 7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 10, Wide input voltage can be set according to customerâ??s requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar/wind system without backup batteries, it can save many cost and maximization use the solar/wind energy. 11, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%. 12, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance. 13, European CE (EMC, LVD, UL1741) and ISO9001 certificates. [Optional] A, RS485 communication; B, AC bypass complementary function; C, Built-in charger
