Pe Pipe For Water Supply Suppliers and Manufacturers

PE (polyethylene) materials due to its high strength, high temperature resistant, corrosion resistant, non-toxic and other characteristics, it is widely used in the field of water supply which is an ideal pipe to replace ordinary iron pipe. Characteristic Eco-friendly and Safer Use - Non-toxic, no heavy metal additives Good service life Impact Resistance Wear Resistance Low Temperature Resistance Lower system and maintenance costs Good Corrosion Resistance Application Urban water pipe system/urban and rural drinking water pipelin /Chemical, Chemical Fiber, Food, Forestry, Printing and dyeing, Pharmaceutical, Light Industry, Paper-making, Metallurgy, etc. /Agricultural irrigation pipeline /Post and telecommunication line/power cable protection pipeline/Mine mortar conveying pipelineï¼?can be used in trenchless project.

Application 1. Municipal water-supply (underground) 2. Water-supply and drainage of buildings 3. Farm irrigation 4. waterscape engineering Features 1.Nontoxic:  pe pipe material nontoxic,  tasteless, it belongs to green building materials. 2.Corrosion resistance:  High resistance to attack of various chemicals, and chemicals in the soil will not have any degradation effects on pipelines. 3.No leakage Pe pipe is connected in the ways of butt fusion,  and the strength of joint point is higher than tube itself. 4. Higher flow capacity: The smooth inner wall is easy for pipeline transportation. 5. Convenient for construction and installation: Pe pipe could be installed in a variety of trenchless ways,  so it is very convenient for construction and installation. 6. Lower system and maintenance costs: Pe pipe is not only convenient to transport and install,  but also reduce the worker’s labor intensity and improve work efficiency. 7. Longevity:  used for more than 50 years under pressure use. 8. recycled and environment-friendly

PE water supply pipe machine Diameter range: 20-25-32-40-50-63-75-90-110 Pressure: PN2.0,PN2.5 Machine consitutute: 1,High efficient single screw extruder 2,Mark line extruder 3,Die&MOULD(all pins) 4,Vacuum calibration tank 5,Cooling tank 6,Haul-off machine(two caterpillars) 7,Chipless cutting machine 8,Pneumatic stacker 9,Gravimetric feeder

Qingdao HUASU Machinery Fabricate Co., Ltd designs and develops HDPE/MDPE water supply pipe production line and gas pipe production line by itself. It has many features, such as: special structure, high degree automation, easy operation, continuous produce stable and reliably and so on. It is also applicable for high speed extrusion of PE,PP,PPR,PERT,ABS etc. Plastic Pipes produced by this line have excellent stiffness, flexibility, high mechanical strength, resistance of environmental stress cracks, resistance to creep deformation, heat-linkage and so on. It has become the first choice for the city gas pipe and outdoor water pipe. HDPE/MDPE pipe extrusion line mainly includes single screw extruder, molds, vacuum calibrating water tank, spray water cooling tank, haul-off machine, cutting machine and overturning bracket. Extruder: HDPE/MDPE pipe extrusion line adopts high speed and efficiency of single screw extruder.The screw has barrier unit, special material mixing components and new style of barrel grooves. The extruder is equipped with low noise fan, ceramic heating ring, high speed hard gear reducer; full-automatic vacuum loader. This configuration assures good plasticization and mixing effect. It also assures high speed, stable production and great output. Pipe Marking Line: It is extruded by single screw extruder SJ30/25 through the composited extrusion die. Die Head: The material of the die head is high quality 40Cr. It is the most advanced spiral or lattice die head in the world, which assures stable extrusion in the production process. In order to fit the performance of PE material and assure the stability of pipe diameter and roundness when producing thick-wall pipe with high speed, we adopt water film lubricating and water (or oil) circulation cooling. Vacuum Calibrating Water Tank: The body is made of high hardness and good quality stainless steel board. It has advanced water circulation and high pressure cooling system, vacuum adjusting equipment and accurate water temperature and water level automatic controlling system. The accurate bronze calibrating sleeve ensures cooling speed and molding pipe. It can be three-dimension adjusted up & down and left & right. Water Spray Cooling Tank: The body is made of stainless steel and the ductcoat is transparent soft PVC curtain. Stainless steel float adjusts water level and electricity controls water temperature. The nozzle material is ABS engineering plastic. The frame of the machine can be adjustable up and down. There is roller in the tank. Haul-off Machine: We can offer two tracks, three tracks, four tracks, five tracks and six tracks Haul-off machine according to different diameter and wall thickness of the pipe. It adopts frequency conversion. Every traction frame transfers with chain which ensures every track moving simultaneously. It is pneumatic and mechanical combination clamping. The bearing has special structure which can effectively reduce the installation error. Cutting Machine: It is automatic dustless cutting machine. Smooth cutting section, synchronous frequency conversion drive, high accuracy and low noise. Large diameter pipe uses full-automatic planetary cutting machine. It is synchronization with the whole production line. The flexibility adjustment for the blade place and cutting depth assures cutting machine reliability. Control System: We can offer SIEMENS PLC controlling system which is intelligent controlling system. Also we can offer ordinary controlling system which use SIEMENS electrical parts, Omron temperature controller. Intelligent control makes the operation simpler. Main Technical Parameter: Model Pipe Diameter (mm) Extruder Speed (m/min) Max.Output (kg/h) Total Power (kw) Dimension L¡ÁW¡ÁH SRQG-63 Ø20-Ø63mm SJ-65¡Á30 1.5-12 120 65 30 ¡Á2.2 ¡Á2.5m SRQG-110 Ø20-Ø110mm SJ-90¡Á30 2-12 220 110 32 ¡Á2.2 ¡Á2.6m SRQG-160 Ø63-Ø160mm SJ-90¡Á30 1.3-6 300 150 32¡Á2.2 ¡Á2.8m SRQG-250 Ø75-Ø250mm SJ-90¡Á33 0.7-4 400 200 40 ¡Á2.2 ¡Á3m SRQG-315 Ø110-Ø315mm SJ-90¡Á33 0.5-3.5 400 200 40 ¡Á2.2 ¡Á3m SRQG-400 Ø160-Ø400mm SJ-120¡Á30 0.3-2.4 550 280 42 ¡Á2.2 ¡Á3m SRQG-500 Ø200-Ø500mm SJ-120¡Á30 0.3-1.9 700 360 42¡Á2.3 ¡Á3.5m SRQG-630 Ø315-Ø630mm SJ-120¡Á33 0.2-0.7 800 450 50 ¡Á2.3 ¡Á3.5m SRQG-800 Ø400-Ø800mm SJ-120¡Á33 0.1-0.6 1100 560 50¡Á2.5 ¡Á4m SRQG-1200 Ø630-Ø1200mm SJ-150¡Á33 0.05-0.5 1300 720 65¡Á3¡Á4.5m Suit for shippment.

Product Description Factory supply PE water pipe making machine is mainly used in the production of water supply and drainage pipes , which used for agriculture and construction , cable coating and other fields , the complete line is consisted of extruder , vacuum calibrator , hauling machine ,cutter and tipping rack , hauling machine unit has come ways of hauling , such as pillar type, three-claw type , four-claw type , six-claw type and so on . there are also knife-lifting cutter and planetary cutter with this extrusion line you can produce high quality water supply and gas supply pipes with excellent hardness and flexibility. Feature 1.The machine adopts DC/AC motor, and Eurotherm DC/AC digital converter and high efficiency screw to ensure high efficiency extrusion. 2. This production line adapts basket type composite die head, which ensures not only the uniformity of high speed extrusion but also the stable performance of tubular goods. 3. This production line adopts high efficiency double chamber vacuum calibrating technology and spray cooling bath to improve the rate of finished products of tubular goods and meet the demand of high-speed production. The vacuum bath and cooling bath adopt stainless steel. 4. This production line adopts multi-caterpillar haul-off and ensures the synchronization. 5. The cutting machine adopts special saw blade with low noise, equipped with chip collector. 6. The whole line adopts PLC control system and large liquid crystal screen, which makes the operation very convenient. Main Composition Compulsory devices 1 Material charge 1 set 2 SJ single screw extruder 1 set 3 Pipe die head 16-1200mm, 1 set or several sets 4 Vacuum calibrating tank 1 set or several sets 5 Water spraying cooling tank 1 set or several sets 6 2-3-4-6-8-10-12 caterpillars hauling off machine 1 set 7 no dust-cutting machine or planetary cutting machine 1 set 8 Pipe stacker-4000-6000mm length 1 set 9 Electrical cabinet(ABB, Omron, RKC, neider etc) 1 set 10 Spare parts 1 set Optional Devices 1 color mixer 1 set 2 Plastic crusher 1 set 3 Plastic shredding machine 1 set 4 Industrial water chiller 1 set 5 Air compressor 1 set 6 Thermocontroller for die head 1 set 7 Ink jet printer 1 set Technical Parameters Pipe Diameter 16-63 32-125 75-250 110-450 315-630 315-800 Extruder 65/33 75/33 90/33 120/30 120/33 150/33 Downstream LG63 LG125 LG250 LG450 LG630 LG800 Total power(kw) 70 150 230 380 550 800

Nominal diameter:20-800mm Rate:0.6-1.6mpa No package

Description of PE Gas/Water Supply Pipe Extrusion Line: Diameter Scope: 20mm-1200mm We designs and develops HDPE/MDPE gas and water supply pipe production line by ourselves. This pipe production line has many features, such as: special structure, high degree automation, easy operation, continuous produce stable and reliably and so on. It is also applicable for high speed extrusion of PE,PP,PPR,PERT,ABS etc. The outstanding characteristics of this production line is that it can not only produce the pure PE pipe complying with the international standard, but also produce the wire reinforcing composite plastic pipe. Plastic Pipes produced by this line have excellent stiffness, flexibility, high mechanical strength, resistance of environmental stress cracks, resistance to creep deformation, heat-linkage and so on. It has become the first choice for the city gas pipe and outdoor water pipe. The whole production line, from charging to stacking shall be controlled automatically by PLC, having high reliability, easy operation and maintenance. With this extrusion line, a layer or multi-layer high strength wire such as steel wire, glass fibre and polyester fibre may be winded do existing pure PE pipe to increase the pipe working pressure to 4MPA. HDPE/MDPE pipe extrusion line mainly includes single screw extruder, molds, vacuum calibrating water tank, spray water cooling tank, haul-off machine, cutting machine and overturning bracket.

Product: HDPE water supply pipe Material: PE pipe( PE100) PE water supply pipe application: 1, PE pipe is suitable for the tap water supply pipeline, Village green water, Fire water, irrigation. 2, Ground source heat pump pipe: the central air conditioning. 3, Siphon drainage system: such as large construction projects, outdoor storm sewer. 4, Sea and sand suction sand, garbage buried ooze water pipe. PE pipe size model: Nominal pressure: 0.6Mpa-1.6Mpa. Nominal diameter: DN 20mm-1000mm. Wall thickness: 2.3-59.3mm.

Product: HDPE water supply pipe. Material: PE pipe( PE80). HDPE Pipe for water supply (PE 80). PE water supply pipe application: 1, PE pipe is suitable for the tap water supply pipeline, Village green water, Fire water, irrigation. 2, Ground source heat pump pipe: the central air conditioning. 3, Siphon drainage system: such as large construction projects, outdoor storm sewer. 4, Sea and sand suction sand, garbage buried ooze water pipe. PE pipe size model: SDR33(PN4), SDR21(PN6), SDR17(PN8), SDR13.6(PN10), SDR11(PN12.5). Nominal diameter: DN 25mm-800mm. Nominal pressure: 0.4Mpa-1.25MPa. Wall thickness: 2.3-59.3mm.

Led bulb, tube light, panel light, decoration light, wall light, steel wires, steel plate, stainless steel plate, twisted wire rods, galvanized wires, wire mesh, site fencing, mosquito mesh, thread rods, rebar, twisted rods, t bar, nuts and bolts, hardware, pvc pipes, upvc pipes, api pipes, melamine, mdf board, plywood, film faced, shuttering, packing, core veneer, face veneer, hdf molded door skin, door filler, tubular particle boards, pvc boards, wpc boards, doors, block board, hard board, gypsum board, canopy, carpet, flooring wooden, bamboo, laminated engineering, tiles, granite tiles, granite blocks, black galaxy, wash basin, water closets, washbasins, ss sinks, faucets, furniture, pvc edge bending, crew, locks, pvc seals, silicone cartridges, shower enclosures, shower door hinges, handles, knobs, brackets, slides, nails, solar panels, flexible solar panels, solar power station, battery, inverters, rechargeable fans, lights, spring, 3ply disposable face mask, oxygen concentrator ,.Buying office, oem, components sourcing, value added services

Pe large-diameter gas-burning pipes

Extruder: HDPE/MDPE pipe extrusion line adopts high speed and efficiency of single screw extruder.The screw has barrier unit, special material mixing components and new style of barrel grooves. The extruder is equipped with low noise fan, ceramic heating ring, high speed hard gear reducer; full-automatic vacuum loader. This configuration assures good plasticization and mixing effect. It also assures high speed, stable production and great output. Pipe Marking Line: It is extruded by single screw extruder SJ30/25 through the composited extrusion die. Die Head: The material of the die head is high quality 40Cr. It is the most advanced spiral or lattice die head in the world, which assures stable extrusion in the production process. In order to fit the performance of PE material and assure the stability of pipe diameter and roundness when producing thick-wall pipe with high speed, we adopt water film lubricating and water (or oil) circulation cooling. Vacuum Calibrating Water Tank: The body is made of high hardness and good quality stainless steel board. It has advanced water circulation and high pressure cooling system, vacuum adjusting equipment and accurate water temperature and water level automatic controlling system. The accurate bronze calibrating sleeve ensures cooling speed and molding pipe. It can be three-dimension adjusted up & down and left & right. Water Spray Cooling Tank: The body is made of stainless steel and the ductcoat is transparent soft PVC curtain. Stainless steel float adjusts water level and electricity controls water temperature. The nozzle material is ABS engineering plastic. The frame of the machine can be adjustable up and down. There is roller in the tank. Haul-off Machine: We can offer two tracks, three tracks, four tracks, five tracks and six tracks Haul-off machine according to different diameter and wall thickness of the pipe. It adopts frequency conversion. Every traction frame transfers with chain which ensures every track moving simultaneously. It is pneumatic and mechanical combination clamping. The bearing has special structure which can effectively reduce the installation error. Cutting Machine: It is automatic dustless cutting machine. Smooth cutting section, synchronous frequency conversion drive, high accuracy and low noise. Large diameter pipe uses full-automatic planetary cutting machine. It is synchronization with the whole production line. The flexibility adjustment for the blade place and cutting depth assures cutting machine reliability. Control System: We can offer SIEMENS PLC controlling system which is intelligent controlling system. Also we can offer ordinary controlling system which use SIEMENS electrical parts, Omron temperature controller. Intelligent control makes the operation simpler.