Nylon Fr With Glass Fiber Reinforced V 0 Pa6 Suppliers and Manufacturers

PA66 FR regrind black color Pa6 / pa66 is mainly applied as follows: 1. Improves nylon water absorption and improves size stability of the product. 2. Improved nylon fire resistance to meet the requirements of electronics, electrical, communications and other industries. 3. Improved mechanical strength of nylon to achieve the strength of metal materials, metal replacement. 4. Improves nylon low-temperature resistance and enhanced resistance to environmental stress. 5. Improves nylon wear resistance to meet high wear resistance requirements. 6. Improves nylon antistatic properties to meet its extraction requirements and mechanical applications. 7. Improves nylon heat resistance to adapt to high temperature conditions such as car engines. 8. Reduce nylon cost and improve product competitiveness. Through the above modification, high performance and functionalization of nylon composite materials are realized, thereby promoting the development of industries involving high performance and high quality. MATERIAL : PA66 FR regrind black color CATEGORY : PA66 FG TYPE : Regrind GRADE : Black color SPECIFICATION : GF50. 1 full container available Origin : Tunisia LOADING WEIGHT 23 Ton FOB (USD/Ton) : 750$ - 950$ Packaging : Jumbo Bag Est. Shipping Time: 15, 30, 45 days

virgin polyester staple fiber 1.2-1.4d 38mm psf fiber Application: 1. yarn spinning, open end spinning and ring spinning, sock yarn, mop yarn 2. needle punch nonwoven, for geotextile, automotive interior, exhibition carpet, trunk nonwoven, insulation panels.

ES fiber is a sheath-core composite fiber obtained by successfully combining low-melting components and high-melting components on a single fiber. It has excellent thermal bonding properties. The low melting point component in ES fiber melts under heat treatment conditions higher than its melting point, and bond with other materials to form a binder-free environmentally and friendly non-woven fabric. ES fiber has various advantages such as soft, fluffy, low-temperature processing, heat-bonding, plasticity, non-toxic, non-irritating, and lightweight. It is mainly used to manufacture high-quality sanitary products such as sanitary napkins and diapers. And it is also high-quality materials used to make medical products such as medical protective cloth and medical protective masks, and so on. There are two main types of ES fibers. The first kind is a composite of PE and PP. Its sheath layer is PE (polyethylene, melting point 130�°C), and its core layer is PP (polypropylene, melting point 165�°C). The second kind is a composite of PE and PE. Its sheath layer is PE, and the core layer is PET (polyester, melting point 255â??), which is an upgraded version of PE/PP. ES is divided into EP and ET in terms of material and functionally divided into the hydrophilic, water-repellent, hydrophilic, and weak parent, single parent, multi-parent.In addition, it also can be divided into whitening, general whitening, high holding, medium holding, and low holding. The specifications are 1.5D38mm, 2D38mm, 4D51mm, and so on. In the future, the trend will gradually develop towards fine deniers. SPECIFICATION: PE+PET ES Fiber: Optical White & Super Hydrophile 2D*38mm, Optical White & Hydrophile 2D*38mmï¼? Optical White & Water Repellency 2D*38mmï¼? RAW White & Water Repellency 2D*38mmï¼? Optical White & Super Hydrophile 1.5D*38mmï¼? Optical White & Water Repellency 1.5D*38mmï¼? RAW White & Water Repellency 1.5D*38mï¼? Hydrophile 2D*38mmï¼? Water Repellency 2D*38mm PE+PP ES Fiber: Hydrophile (P2Q) 2D*38mm

New-type hot-connectivity composite fiber is made from different types of modified high molecular materials through advanced composite spining technology. It has unique characteristic of melting at low temperature, and after hot treatment, it can naturally adhere without use of binder, green and environmental. The product abides by strict sanitation control standards to achieve sanitation material grade. The products include ES fiber and ETS modified polyester composite staple fiber which is initiated by the company, and can be applied to production of surface layer and guide layer of disposable sanitary articles Functional characteristic the product is a kind of chemical blend provided with advantages of the two materials. ES fiber has low melting point on the superficial layer, soft, bouffant and pervious, while the core layer has certain intensity and fiber state. ETS fiber is provided with advantages of heat bonding, high hygroscopicity and antistatic property, etc. Application scope the sanitary products are applicable to hot air penetrating technology to produce surface layer and guide layer of disposable sanitary materials such as paper diaper and sanitary towel; the conventional low-melting fiber is applicable to production of hard cotton, decorative wall board, environmental mattress, seat mat, environmental filter media, constructional acoustic damping and heat insulation materials, etc. Specification 4D*51MMã??4D*32MM

High Tenacity or Medium Tenacity Recycle Polyester Staple Fiber (white or black fiber) (Nearing to Virgin fiber)

Commonly used as a binder fibre in core-sheath constructions, our Polyester Low Melt LMF (CoPET/PET) fibre bonds to other polyester fibres to produce wadding, insulation, filtration, automotive, and other products where heat is used to bond the fibres. This fibre is normally blended with solid polyester fibres or recycled materials.

Flame Retardant Resistant Aramid Staple Fiber, Kevlar Staple Fiber, Aramid Thread or Staple Fiber

Regenerated 1.4D 1.5D 3D 6D 7D 15D Black Polyester Staple Fiber for Nonwoven Carpet -Textile yarns.the end products are clothing, home textiles, decorative cloth, etc. -Nonwoven. the end products are wet wipes, masks, etc. -Filling.the end products are winter clothes, pillows, toys,etc.

Specification: 3-110D * cutting length 5~102mm, color can be according to customer`s requirement. Our products can be used in non-woven, automotive interiors, geo-textiles, speaker cloth and needle carpet, spinning wool, filters, adsorption materials. Our fiber also can be added flame retardant, anti-UV, anti-aging properties according to the customer's requirement.

3mm 6mm 100% Virgin New PP Material Staple Monofilament Polypropylene Fiber 0086-13915721168 Product number: PP Micro fiber Equivalent diameter: 15-48 um Elastic Modulus: â?¥3500 M�·pa Breaking strength: â?¥ 560 M�·Pa melting point: 160-180�°C proportion: 0.91-0.93 g/cm�³ length: 3-20mm (as custom requirement) Acid and alkali resistance (strong retention rate) â?¥96% 1. PP pressed Woven Bag 2. 300-350kg/ bale 3. About 9-10Tons / 20'FCL 4. About 21-22Tons / 40'FCL

Making wadding and padding materials 7D*64mm HC non silicon polyester staple fiber white color 054310599 Our siliconized fiber mainly can be used in home textile, such as filling sofa, pillow, cushion and winter clothing and non siliconized mainly can be used in non woven fabrics, such as padding, mattress and wadding.

Fibre Fill Polyester Filling Microfiber Fiber 0.9d Down Like Virgin Micro Gel Fiber Hot Sale Virgin Down Like Polyester Fiber filling fiber hollow conjugated fibers recycled polyester stuffing fiber 1) Denier:0.8D-1.5D 2) Cut length:22MM/25MM/32MM/38MM/51MM/64MM/71MM/76MM 3) Luster:raw white Virgin and recycled grade 4) Siliconized and no siliconized 5) Merits: high intension, stable stretch elongation, highly elastic, puffed, high ratio of hollowness 6)Excellent fluffy performance, pleasing hand feeling, plump, gentle, luster 7) Usage: suitable for filling toys, pillows, cushions, and other products need to be filled ; make pearl cotton. bedclothes , man-made fur, filler materials, sofa and others 8) Weight: around 300kgs/bale 9) Package: woven bag Container load: around 34 bales for a 20GP,around80 balesfor a 40HQ 10) Delivery Time: within 15 days after receiving the deposit

PET FLAKES The Recycling PET (Polyethylene Terephthalate) Flake is obtained from post-consumption of Recycling PET Plastics Bottles recycling. Strong material with light weight. The flake is processed by blowing, injection, and extrusion. SPECIFICATION: GRADE AA PVC CONTENT: 0.005% (50ppm) OTHER IMPURITY: 0.01% (100ppm) GLUE RESIDUE/GLUE: 0.02% (200ppm) GRADE A: PVC CONTENT:0.01% (100ppm) OTHER IMPURITY: 0.02% (200ppm) GLUE RESIDUE/GLUE:0.02% (200ppm) COLOR: CLEAR / NATURAL PURPOSE: For the raw material in many industries : Recycled PSF/Fiber, Strapping Band, Sheet, Bottle PACKAGING Jumbo bag LOADING 20 ton/40" container PRODUCTION CAPACITY 500 metric ton per month

Bleached Softwood Pulp is commonly used in the production of most paper, paperboard and tissue products. Softwood pulp brings strength to the end product, as well as runnability and excellent dewatering properties to the production process.

Advantages: It is uniformly depressed anti-adhesive, with excellent film-forming properties; Polymerization of continuous device production makes the quality high and stable. Application: It can be used in films with special requirements for optical and surface properties or ultra- films below 81/4m (micrometer ). It can be used directly in the food packing materials after FDA approval.

For the production of thin film and solar cell encapsulation substrates with high strength requirement The solar polyester film can protect the solar panel.

Spodumene, lithium ore, lithium concentrate content Li2O 5-8% or more Long-term supply of spodumene ore and lithium concentrate, with different contents of 5%, 6%, and 7% or more can be supplied. It can supply about 1000-2000 tons per month. Interested ceramic glass factories or traders are welcome to contact us. Li2O: 6.00%, Al2O3: 25.56%, SiO2: 63.72%, Fe2O3: 0.26% CaO: 0.17%

Lead, Zinc Ore from Nigeria