Non-Pressurized Solar Collector Solar Water Heater (60L 80L 100L 140L 160L 180L 240L 300L 400L 500L) Specialty 1. Economical type for most of area, common people can afford it 2. Simple product structure: Solar collector and water tank connected together directly, no need of pipe to connect, and no pump to push fluid 3. Mature technology and stable operation 4. Higher efficiency on photo thermal conversion. 5. Accessory is popular and easy maintenance Solar water heater Specifications: 1) Inner tank thickness of solar heater: 0.4mm, 360mm/370mm/380mm 2) Outer tank thickness of solar heater: 0.4mm, 460mm/470mm/480mm 3) Inner tank of solare water heater: SUS304 food grade stainless steel. 4) solar water heater Outer tank: Stainless steel, 0.4mm 5)solar water heater tank capacity: 80L/100L/120L/150L/180L/200L/240L/250L/300L 6) Thickness of solar water heater bracket: 1.5mm 7) Glass vacuum tube of solar water heater: 58mm X 1800mm Remark: 1. Solar heat storage tank diameter(mm): 460mm/480mm 2. Thickness, insulated(mm): 50mm 3. Vent connection(inch): 1/2''or /3/4'' 4. Electric heater: 47mm 1500W, 3/4'' 5. Water connection(inch): 1/2'' or 3/4'' 6. Collector angle(degree): 25-45
Ke58s Vacuum tube: 58x1800mm Inner tank: stainless steel 304 2b food grade Outer tank: aluminum galvanized sheet Folded from mould with powder painting Outer tank dia.460mm Frame: aluminum with anti-oxidation treatment Insulation: 50mm polyurethane total forming with pressure and best density 40kgs/m3 Available sizes: 18, 20, 22, 24, 28, 30, 36 Tubes with capacity 135l up to 325l In cartons
Material and major element of solar water heater: 1. Inner water tank: sus304-2b stainless steel /0.5mm thick 2. Outer water tank: white plate /0.4mm thick 3. Bracket: sus430 stainless steel /1.2mm and 1.5mm thick 4.Solar vacuum tube: A) size: 47 x 1, 500mm / 58 x 1, 800mm B) qty: 15 /18 / 20 / 24 / 30 pcs 5.Temperature insulation layer; 5.5cm imported polyurethane, keep same temperature and high pressure foam 6.Tank diameter:460 mm
Features: 1) The design of this type uses the all-glass evacuated solar collector tubes as the heat-absorb element. 2) Easy plug-in installation 3) Outer tank material: stainless steel plate or powder coated color steel sheet Key specification: 1) Inner tank: stainless steel SUS304-0.4mm 2) Vacuum tube: Ñ+47 x 1,500mm, Ñ+58 x 1,800mm 3) Tank diameter: 410mm, 460mm, 490mm 3) Outer tank: colored steel-0.4mm 4) Insulation: polyurethane 50mm-60mm 5) Frame: coated galvanized steel-1.5mm/stainless steel-1.5mm Type Area( º¦ ) Vacuum tube Volume(liters) Gross wet(kg) 20GP/40GP/40HC loading Qty(sets) ¿¬(mm) Length(mm) Qty(pcs) LC47/1500-15 1.87 47 1500 15 80 53 56/118/134 LC47/1500-15 1.87 47 1500 15 110 55 52/114/128 LC47/1500-18 2.25 47 1500 18 100 60 48/104/118 LC47/1500-18 2.25 47 1500 18 150 65 40/88/100 LC47/1500-20 2.50 47 1500 20 110 67 45/96/108 LC47/1500-20 2.50 47 1500 20 165 72 38/80/92 LC47/1500-24 3.00 47 1500 24 130 75 38/84/96 LC47/1500-24 3.00 47 1500 24 200 80 34/70/78 LC47/1500-30 3.75 47 1500 30 160 85 34/70/78 LC47/1500-30 3.75 47 1500 30 245 91 30/64/68 LC47/1500-36 4.50 47 1500 36 195 98 28/61/70 LC47/1500-36 4.50 47 1500 36 300 105 26/54/60 LC58/1800-12 2.24 58 1800 18 100 45 48/100/116 LC58/1800-14 2.60 58 1800 14 120 50 42/88/100 LC58/1800-16 3.00 58 1800 16 140 58 38/78/84 LC58/1800-18 3.40 58 1800 18 160 65 36/76/80 LC58/1800-20 3.70 58 1800 20 180 70 32/68/72 LC58/1800-24 4.50 58 1800 24 220 78 26/56/20 LC58/1800-30 5.60 58 1800 30 280 95 22/46/52
Non-pressure solar water heater The characteristic: 1 Inner tank : stainless steel SUS304-0.5mm 2 Vacuum tube : QB-AL-N/AL-58-1800 3 Out tank : painted steel-0.4mm,aluminum-zinc coated steel--0.45mm,stainless steel SUS304 4 Frame: coated galvanized steel sheet-1.5mm;stainless steel SUS430-1.5mm. 5 The material of insulation:polyurethane 50mm/60mm/65mm 6 The reflector:Aluminum component : Al 99.85% surface oxidation. G.W 71KG
Heating system: Thermosyphon (passive) Connection type: Direct-plug Installation: Roof mounted Housing material: Coated steel Certification: Ce Capacity: 165 Place of origin: Zhejiang china (mainland) Brand name: Jinyi & oem Model number: Jng5818-15 Out tank material: Coated steel Out tank diameter: 470mm Out tank thickness: 0.4mm Inner tank material: Sus304-2b Inner tank diameter: 360mm Inner tank thickness: 0.4mm Tank insulation pu foam: High density Tank insulation thickness: 55mm Vacuum tubes length: 1800mm Support bracket material: Galvanized steel Packaging detail:1. Cartons: 4ctns 2. Pallet: (charge by extra)
1. The outer tank: Color Coated Steel, thickness 0.4mm. 2. The inner tank: SUS304/2B, thickness0.5mm. 3. The warm keeping layer: polyurethane foaming 55mm. 4. The bracket, Galvanized Steel, thickness 1.5mm 5. Vacuum tube: 47-1500 or 58-1800, Two layer. 6. Angel of bracket: as your need.
Specifications: 1) Tank Inner tank: SUS 304-2B (food grade) Stainless Steel. Outer tank: SUS 201 Stainless Steel. Insulation layer: Polyurethane Foaming. Heat preservation: 72h. Tank capacity: 98L ~ 300L. 2) All Glass Vacuum Tube Diameter:ª¦47, ª¦58 Length: 1500mm, 1800mm. Numbers of tube: 15, 16, 18, 20, 24, 30pcs. Hail resistance: 25mm 3) Bracket Material: SUS 201 Stainless Steel. 4) Accessories: Electric Heater, Controller, Assistant Tank, Magnesium Stick and so on. Pack in cartons
Model: UNP-S02 Series Type: No pressure Solar Vacuum Tube: 8/10/12/15/18/20/24/30/36 Tube Size: 58*1800 1.95kgs Tank Capacity: from 80L to 300L Material: Stainless steel Bracket: U type and 1.2mm thickness
Compact non-pressure solar water heater Tech data: 1. Inner water tank:stainless steel, sus304-2b, ss316l; thickness, 0.31-0.51mm. 2. Outer water tank:color steel or stainless steel;thickness, 0.40mm. 3. Insulation layer:polyurethane foam;thickness, 30-60mm. 4. Frame:galvanized steel; aluminum alloy; stainless steel; angle, as your requirement. 5. Vacuum tubes:aln/ain-ss/cu layer;47-1500 or 58-1800. 6. Tank capacity:70-400l. 7. Assistant tank heating element, mg rod, reflector and controller can be provided. Characteristic: 1. Operated completely automatic if connect with intelligent controller. 2. Installed both on flat and inclined roof, and can be used with a electric booster (heating element) as to provide hot water without sunshine. 4. Suitable for camping area, holiday residences. 5. Stable and reliable performance, well wind resistance
1. Inner Tank: o.41mm SUS304-2B food grade stainless steel (optional material: SUS316L). 2. Outer Tank: o.31mm color steel (SUS304-2B). 3. Bracket: galvanized steel plate with plastic spraying, thickness 1.2mm/1.5mm, angle 20¡ã/30¡ã/40¡ã/45¡ã. 4. Insulation: 55mm polyurethane layer. 5. Vacuum tube material: borosilicate glass 3.3; AL-SS-CU absorb coating 6. Seal material: Stabilized High Temperature Silicon 7. It resists 25mm hail. 8. Heat preservation: 72 hours Seaworthy cartons for container orders, Wood case for samples.
1. Inner Tank: o.41mm SUS304-2B food grade stainless steel (optional material: SUS316L). 2. Outer Tank: o.31mm color steel (SUS304-2B). 3. Bracket: galvanized steel plate with plastic spraying, thickness 1.2mm/1.5mm, angle 20¡ã/30¡ã/40¡ã/45¡ã. 4. Insulation: 55mm polyurethane layer. 5. Vacuum tube material: borosilicate glass 3.3; AL-SS-CU absorb coating 6. Seal material: Stabilized High Temperature Silicon 7. It resists 25mm hail. 8. Heat preservation: 72 hours Seaworthy cartons for container orders, Wood case for samples.
1. Inner Tank: o.41mm SUS304-2B food grade stainless steel (optional material: SUS316L). 2. Outer Tank: o.31mm color steel (SUS304-2B). 3. Bracket: galvanized steel plate with plastic spraying, thickness 1.2mm/1.5mm, angle 20;/30;/40;/45;. 4. Insulation: 55mm polyurethane layer. 5. Vacuum tube material: borosilicate glass 3.3; AL-SS-CU absorb coating 6. Seal material: Stabilized High Temperature Silicon 7. It resists 25mm hail. 8. Heat preservation: 72 hours Seaworthy cartons for container orders, Wood case for samples.
1. Inner Tank: o.41mm SUS304-2B food grade stainless steel (optional material: SUS316L). 2. Outer Tank: o.31mm color steel (SUS304-2B). 3. Bracket: galvanized steel plate with plastic spraying, thickness 1.2mm/1.5mm, angle 20;/30;/40;/45;. 4. Insulation: 55mm polyurethane layer. 5. Vacuum tube material: borosilicate glass 3.3; AL-SS-CU absorb coating 6. Seal material: Stabilized High Temperature Silicon 7. It resists 25mm hail. 8. Heat preservation: 72 hours Seaworthy cartons for container orders, Wood case for samples.
1. Inner Tank: o.41mm SUS304-2B food grade stainless steel (optional material: SUS316L). 2. Outer Tank: o.31mm color steel (SUS304-2B). 3. Bracket: galvanized steel plate with plastic spraying, thickness 1.2mm/1.5mm, angle 20¡ã/30¡ã/40¡ã/45¡ã. 4. Insulation: 55mm polyurethane layer. 5. Vacuum tube material: borosilicate glass 3.3; AL-SS-CU absorb coating 6. Seal material: Stabilized High Temperature Silicon 7. It resists 25mm hail. 8. Heat preservation: 72 hours Seaworthy cartons for container orders, woodcase for sample
Thermosyphon solar water heater relies on the natural circulation of water between the collector and the tank or heat exchanger. As water in the vacuum tubes is heated it rises naturally into the tank, while cooler water in the tank flows down to the bottom of the vacuum tubes, causing circulation throughout the system. Technical specificationa *Both of inner and outside water tank shell are made of SUS3042B food grade stainless steel plates, welded by argon arc. Water is pure and drinkable. *Heat insulation of water tanks adopts polyurethane foam, thickness is 55mm. *Silicon rings to connect and seal them. *The tubes and supports are adjustable, power bearing is average, and can assure the vacuum tubes to use for long time. *Whole glass vacuum tubes adopt super hard borax and silica glass. *Absorb rate:=93%, thermal radiation rate:=6%(100 íµ) *Resist 25mm hail, using life can last 15 years. *Temperature when exposed to sun without water:250íµ, 2.5hours to boiling if using single tube. *If you use electrical appliances to aid heating, to switch off the power supple before boiling. *To test the water temperature before using, in order to avoid scalding.
OEM factory since 1998 CE,ISO,CCC,SGS Samples welcome 5 years warranty and free training Features:1.Cheap and reliable solution, Simple structure, Easy installation. High-efficiency. Scientific and reasonable design. Withstand water pressure no more than 0.1MPa Operated without any power supplying Electric heater 1.5KW for heating when there is no enough sunshine,such as raining,snowy. Hot water can be used directly and higher heating efficiency Detail Specifications: Inner tank: Food grade SUS304-2B stainless steel by argon protect welding& thickness: 0.5mm;2) Outer tank:Color steel coated anti-corrosion layer &thickness:0.5mm; Insulation layer: Imported polyurethane foamed with overall high pressure equipment & thickness : 55mm; Density:36~39KG/m3; Vacuum tube: AlN-Al high selective coating tube& Absorption:í¦93%; Emittance:í_ 5%. Freeze protection:-25íµ Hair resistance: 25-35mm Bracket: hot galvanized steel painted with anti-corrosion layer &thickness:1.5mm;suitable on inclined or flat roof; Wind stress: 183.5km/h without damage All install documents are free Export cartons packing/ wooden cases for sample
OEM factory since 1998 CE,ISO,CCC,SGS Samples welcome 5 years warranty and free training Features:1.Cheap and reliable solution, Simple structure, Easy installation. High-efficiency. Scientific and reasonable design. Withstand water pressure no more than 0.1MPa Operated without any power supplying Electric heater 1.5KW for heating when there is no enough sunshine,such as raining,snowy. Hot water can be used directly and higher heating efficiency Detail Specifications: Inner tank: Food grade SUS304-2B stainless steel by argon protect welding& thickness: 0.5mm;2) Outer tank:Color steel coated anti-corrosion layer &thickness:0.5mm; Insulation layer: Imported polyurethane foamed with overall high pressure equipment & thickness : 55mm;Density:36~39KG/m3; Vacuum tube: AlN-Al high selective coating tube& Absorption:í¦93%; Emittance:í_ 5%. Freeze protection:-25íµ Hair resistance: 25-35mm Bracket: hot galvanized steel painted with anti-corrosion layer &thickness:1.5mm;suitable on inclined or flat roof; Wind stress: 183.5km/h without damage All install documents are free Export cartons/ packing
1) inner tank:stainless steel sus304-0.5mm 2) vacuum tube:qb-al-n/al-47-1500/58-1800 3) outer tank:stainless steel sus304 4) insulation:polyurethane 50mm/60mm 5) frame:stainless steel bar 1.2mm 6) reflector:stainless steel
KM24-150-S consists of 24 vacuum tubesand its water tank's capacity is 150 Liter. The inner of tanks isstainless steel, while the outer of them is galvanized. It has 50 mm polyurethaninsulation and high quality.This type of solar system includes a water tank, an expansion tank, 24 pcs vacuum tubes and standparts.
