N10276 Hastelloy C 276 Alloy Seamless Tubes Suppliers and Manufacturers

Hastelloy C-276 is a nickel-molybdenum-chromium superalloy with exceptional corrosion resistance in a variety of aggressive media. It was developed by Haynes International in the 1960s as a more versatile alternative to other nickel alloys such as Hastelloy B-2 and Hastelloy C-4. The high chromium content in Hastelloy C-276 provides superior resistance to oxidizing environments, while the molybdenum and tungsten enhance resistance to reducing media. The nickel content also makes Hastelloy C-276 highly resistant to chloride-induced stress corrosion cracking. Hastelloy C-276 has a wide range of applications in industries such as chemical processing, pulp and paper production, waste treatment, and pollution control. Its resistance to hot sulfuric acid and chlorine environments makes it suitable for use in scrubbers, ducting, and piping systems. It is also used in flue gas desulfurization systems and in the production of organic chemicals such as acetic acid and acetic anhydride. Hastelloy C-276 is a versatile alloy that can be easily fabricated using traditional techniques such as hot and cold forming, welding, and machining. It can also be heat treated to optimize its properties for specific applications. For example, annealing at temperatures between 2050�°F and 2150�°F can improve resistance to intergranular attack, while solution annealing at 2150�°F followed by rapid quenching can enhance resistance to localized corrosion. Overall, Hastelloy C-276 is an excellent choice for applications that require superior corrosion resistance and high strength in aggressive environments. Its versatility, ease of fabrication, and excellent mechanical properties make it a popular choice in a variety of industries. The following are the various national standards for Hastelloy C-276 alloy: United States: AMS 5750, AMS 5751, AMS 5796, AMS 5587, ASTM B366, ASTM B462, ASTM B574, ASTM B575, ASTM B619, ASTM B622, ASTM B626, UNS N10276 Europe: EN 2.4819 Germany: DIN 17744 France: AFNOR NC 17 D United Kingdom: BS HR 202, BS HR 403 Japan: JIS NW 0276 We can offer the following products:Hastelloy C-276 coil; Hastelloy C-276 strip;Hastelloy C-276 plate; Hastelloy C-276 sheets; Hastelloy C-276 tube; Hastelloy C-276 pipe;Hastelloy C-276 flat; Hastelloy C-276 bar GB:GH2761/JIS:NW 0276/UNS :N10276/W.Nr:2.4819 Hastelloy C-276 has a wide range of applications in industries such as: Chemical processing Pulp and paper production Waste treatment Pollution control Scrubbers, ducting, and piping systems in sulfuric acid and chlorine environments Flue gas desulfurization systems Production of organic chemicals such as acetic acid and acetic anhydride. It is also used in various other applications where corrosion resistance and high strength are critical.

We deals in the following products of India, China, Taiwan and Korea Origin:- 1)Hot Rolled Steel (Hot Rolled Sheets, Hot Rolled Coils, Hot Rolled Plates, Hot Rolled Bars etc) 2)Galvanized Steel (Galvanized Steel Tapes, Galvanized Steel Wires, Galvanized Steel Strips, Galvanized Steel Coils, Galvanized tubes etc) 3)Cold Rolled Steel (Cold Rolled Steel Strips, Cold Rolled Steel Coils, Cold Rolled Sheets etc) 4)Stainless Steel (Stainless Steel Strips, Stainless Steel Coils, Stainless Steel Wire, Hardened and Tempered Spring Steel, Stainless Spring Steel, Spring Steel Wires etc) 5)Steel Tube and Pipes ( ERW, CRW, CRS, Black, Galvanized, Stainless ) 6)Forged Column Clamps, Girder Clamps, Pressed Clamps, Rapid Clamps, Support Clamps & Wedge Clamps. 7)Heavy Duty Props & Light Duty Props. 8)Nuts, Bolts, Nails & Fastners 9)System Scaffolding, Base Plate & Adjustable Base. 10)Steel Tie Rod, Waller Plates and Wing Nuts. 11)Drop Forged and Pressed Sheet Metal Couplers of all types. 12)Steel Billets, Steel Angle & Steel Channels.

High Precision Steel Pipe for Gas spring Cylinder Type:Seamless and Welded Steel Tube Roughness 0.1-0.8ra Material E195-E235,Q195-Q235,#10,#20,#45,SAE1010,SAE1020 Surface:Black/bright Standard:DIN, GB, JIS, DIN 17175, DIN 2391, GB 5310-1995, GB/T 13793-1992, GB/T 3094-2000, GB/T 8163-1999, JIS G3101 Size :OD 3mm-140mm Thickness 0.5-20mm Processing :Cold rolled /cold drawn 1. BK (+C) No heat treatment after last cold forming process. 2. BKW (+LC) After last heat treatment there is a light finishing pass (cold drawing) 3. BKS (+SR) After the final cold forming process the tubes are stress relieve annealed. 4. GBK (+A) After the final cold forming process the tubes are annealed in a controlled atmosphere. 5. NBK (+N) After the final cold forming process the tubes are annealed above the upper Woven bag / wooden or crate carton/ Bundle Packing/ Plain end or vanished as per customer's request. Usage: Gas Spring Cylinder

Standards ASTM / ASME B622, B619, B626 / SB622, SB619, SB626 Outer Diameter 6.00 mm OD up to 914.4 mm OD, Sizes up to 24â?? NB Thickness 0.3mm â?? 50 mm Type Seamless / ERW / Welded Pipes Schedule SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS Seamless Pipes & Tubes Size 1 / 8â?³ NB â?? 24â?³ NB ERW Pipes & Tubes Size 1 / 8â?³ NB â?? 36â?³ NB Length Single Random, Double Random & Required Length End Plain End, Beveled End, Treaded

Black Square / Rectangular Steel Tubes: Length: 5.8m Origin: China Payment Terms: TT Delivery: Within 25-30 Days After Receiving Advance Payment Sizes PCS / PMT 20x20x1.2 243 25x25x1.5 155 30x30x1.5 128 40x40x1.5 95 25x50x1.5 100 Price: USD 650 PMT FOB

Standards ASTM / ASME B729, B464, B468 / SB729, SB464, SB468 Outer Diameter 6.00 mm OD up to 914.4 mm OD, Sizes up to 24â?? NB Thickness 0.3mm â?? 50 mm Type Seamless / ERW / Welded Pipes Schedule SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS Seamless Pipes & Tubes Size 1 / 8â?³ NB â?? 24â?³ NB ERW Pipes & Tubes Size 1 / 8â?³ NB â?? 36â?³ NB Length Single Random, Double Random & Required Length End Plain End, Beveled End, Treaded

Origin: Vietnam Type: Tube, Butterfly Specification: Clean, Natural Size: Small, Big MOQ: 50kg Payment term: TT, L/C

Origin: Vietnam Type: Tube, Butterfly Specification: Clean, Natural Size: Small, Big MOQ: 50kg Payment term: TT, L/C

Origin: Vietnam Type: Tube, Butterfly Specification: Clean, Natural Size: Small, Big MOQ: 50kg Payment term: TT, L/C

We are exporter of Ferro Chrome. We supply the Quality Ferro Alloys Like Ferro Chrome HC Cr 60% min Si 3.50% Max C 8.50% MAX S 0.05% Max P 0.04% Max

Hastelloy C is a nickel-chromium-molybdenum alloy that provides excellent corrosion resistance in a variety of harsh environments. It is commonly used in the chemical processing, petrochemical, and power generation industries for its high resistance to a wide range of corrosive media, including strong oxidizing agents, reducing environments, and hot contaminated solutions. Hastelloy C also exhibits good thermal stability, making it suitable for use in high-temperature environments. Its thermal conductivity is 67 Btu�·in/(hr�·ft�²�·�°F) (9.7 W/(m�·K)), and its coefficient of thermal expansion is 7.7 �? 10^-6 in/in/�°F (13.9 �? 10^-6 m/m/�°C). In addition to its excellent corrosion resistance and mechanical properties, Hastelloy C is also weldable and easily fabricated into a variety of shapes and forms. It can be cold worked, hot worked, and annealed for optimal performance. Overall, Hastelloy C is a versatile alloy that offers exceptional performance in a wide range of harsh environments. Its combination of corrosion resistance, mechanical properties, and thermal stability make it a popular choice for demanding applications in the chemical processing, petrochemical, and power generation industries. US Standards: AMS 5750: Standard specification for Hastelloy C steel bars and shapes; AMS 5786: Standard specification for Hastelloy C welding wire; AMS 5771: Standard specification for Hastelloy C plate, sheet, and strip; AMS 5757: Standard specification for Hastelloy C seamless pipe and tube; ASME SB 574: Standard specification for Hastelloy C forged fittings. European Standards: EN 2.4819: Standard specification for Hastelloy C steel bars, wire, and forgings; EN 10095: Standard specification for Hastelloy C plate, sheet, and strip; EN 10216-5: Standard specification for Hastelloy C seamless steel tubes; EN 10217-5: Standard specification for Hastelloy C welded steel tubes. Japanese Standards: JIS NW 6222: Standard specification for Hastelloy C plate, sheet, and strip; JIS NW 6022: Standard specification for Hastelloy C rods and wires; JIS NW 6220: Standard specification for Hastelloy C seamless pipes and tubes; JIS NW 6221: Standard specification for Hastelloy C welded pipes and tubes. Chinese Standards: GB/T 15006: Standard specification for Hastelloy C bars, wires, and profiles; GB/T 15008: Standard specification for Hastelloy C plate, sheet, and strip; GB/T 15011: Standard specification for Hastelloy C seamless pipes and tubes; GB/T 15012: Standard specification for Hastelloy C welded pipes and tubes. We can provide the following the products:Hastelloy C coil; Hastelloy C strip;Hastelloy C plate; Hastelloy C sheets; Hastelloy C tube; Hastelloy C pipe;Hastelloy N flat; Hastelloy C bar GBï¼?NA1002/JIS ï¼?NW6022/UNSï¼?N06455/W.Nrï¼?2.4819

Product name: Coconut Fiber Rope/ Coir Rope Color: Natural Brown Packing: Each rolls is wrapped by traps and plastic tube inside. Diameter: 1-22mm Moisture: 8% max Length: 100m, 160m, 200m or as request Payment term: T/T or L/C

We are supplier and exporter of Ferro Silicon. Ferro silicon Specs: Si:75%min. and Si:72%min. C:0.2%max. S:0.02%max. P:0.04%max. Al:2.0%max.1.5%max.and 1.0%max .Commodity: Ferro Silicon Low Al Specs: Si:75%min. C:0.2%max. S:0.02%max. P:0.04%max.Al:0.1%max.0.3%max.and0.5%max. In 1mt plastic woven bags. Ferro Silicon Ferro Silicon has a melting point of 1200�?�°C to 1250�?�°C with a boiling point of 2355�?�°C and Ferro Silicon contains about 2% of calcium and alluminium. Ferro Silicon, as an additive to the production process of ferrous metals, will impart several desirable properties upon the resultant alloy. Some of the primary benefits of adding Ferro Silicon to an alloy is to improve the corrosion resistant properties of the new compound, as well as to add to the high temperature heat- resistance properties of the new alloy, for example, in the production of silicon steel for use in transformer cores.

ð???Specifications: - Type of fish: Pangasius, Sea Bass, Olothoides Biauritus - Shape: Butterfly shape and Tube shape - Length: 5-10 cm, 10-20cm, 20-30 cm/piece - Weight: Butterfly shape: 100-120 pcs/ kg Tube shape: 30-40 pcs/ kg (thin type) 9-15 pcs/ kg (thick type) - Shelf life 2: years - Origin: Vietnam - Other information :Dried under sunshine, no oil, no unknown smell. - Payment & delivery: L/C, T/T, negotiable.

* PHOSCAST Phoscast : Phosphate Bonded Castables * PURPOSE customers using FBC boilers (Particularly underbed feed FBC boilers) for the protection of inbed coils against erosion potential by applying highly abrasive resistant refractory on inbed coils above fuel feed system. BACKGROUND * Two of such actions are providing special alloy studs on inbed coils and applying highly abrasive resistant refractory on the outer bottom loops of inbed Coils which are above the fuel feed nozzles. * GANESHAS has taken number of approaches to identify the key factors affecting erosion rates with an objective to enhance the life of inbed tubes as well as implementing the corrective action to reduce the erosion rates. Phosphate coatings are often used to protect steel parts against rusting and other types of corrosion * Erosion of inbed coils in fluid bed combustor is unavoidable phenomenon however the rate of metal wastage and thus the life of tubes depends on various factors like ash & fuel properties, design of Combustor / feeding system, flue gas velocities operating conditions etc. It has been also observed that maximum erosion prone inbed coils are those which come above fuel feed nozzles and an area of approximately 1 to 1.5 mts around fuel feed systems are badly affected. APPLICATION Phoscast-90 XR can be applied by ramming with wooden mallet having adequately large head @" dia x 5" length x 10â?? Jong handle). The desired lining or repair thickness is built up in several courses while ramming the mass to uniform thickness. Phoscast refractory should never be trawled to obtain smooth surface; ramming only should finish surface. Any excess mass is to be sliced off with trowel edge and then finished by ramming again for bed coil. Tube application of AFBC boiler, the material pasty mass should be finger pressed into the studs of the tube with maximum force. Finish should be given by pressing the hand palm against material applied, using surgical type thin rubber hand gloves.