Product Overview: DP Pump is a self Cbalancing multilevel boiler feed pump with single-suction, multievel and sectional structure. This series of pumps are suitbalbe for medium and low pressure boiler water feeding, and high-pressure boiler water feeding for thermal power plant, as well as high-lift water supply and drainage of factories and cities. They are used in transferring water or other liquid with similar physical and chemical properties to water. Temperature of media being transferred can vary from -20~160 Efficient energy-saving: Using advanced hydraulic model, independent R&D energy efficient products. Good centering of impeller and guid vane channel and efficiency will not significantly drop as balancing disc wears and rotor components move forward. No leakage of balancing water reduces loss of volume and improves pump efficincy and pump efficiency is on average 2-5% higher than normal DG pump. New structure: With symmetrically arranged impeller rotor components, axial forces generated by all levels of symmetrical impellers forces offset each other and automatic balancing of huge axial thrust within pump cavity can be realized without the balcancing disc structure. New technology: Unique throttling and pressure reduction devices, odd-lecel balancing device. High reliability: By canceling easy-failing balancing disc, pump reliability is greatly improved, maintenance frequency and maintenance cost are reduced. Low maintenance cost and long life time By adopting precision casting and unique throttling and pressure reducing devices for auxiliary support, pump vibration and noise are greatly reduced and service life is prolonged.
SD Self-balancing Multistage Centrifugal Pump has been innovated on the basis of the traditional forms, abandoning the axial force balancing structure of the multistage centrifugal. Since having no balancing device, there exists none disk friction losses nor balancing return losses, the pump efficiency has been increased by 5-14% than the same category multistage pumps.The pressure can be up to 200bar Product name : Self-balancing multistage pump Item : high pressure multistage pump Features : ---SD tpye horizontal multistage centrifugal electric pump ,introduced the technology from CLYDE UNION PUMP. ---No balance plate, so wider performance range. ---5%-15% higher efficiency than the old style common multistage pump. ---Directly coupled, vibration proof and low noise. ---Circulating flow cooling ensure mechanical seal long life. ---Excellent seal that is no leakage. ---work steadily and safety. ---Low noise,less easy-wearing parts and easy for maintaining. Data sheet : Flow: 3.75~1100m3/h Head: up to 2000m Speed: 1480r/min, 2950r/min (50HZ) 1750r/min, 3540r/min(60HZ) Temperature: 225¡æmax Working pressure:2.5MPa Application: ---Water supply and discharge in high-rise buildings ---Water supply and discharge in factories and mines ---pressure boosting,sea water delivery ---Fire fighting ---Cyclic pressurization in production
MD Multistage Pump Size (discharge): 1 inch to 32 inch Capacity: 3.4~ 15000 m3/hr Head: 8.6~140m Efficiency:Up to 92% Materials:Cast iron,SS 304,SS 316,Bronze etc. MD Multistage Pump Introduction: Multistage Pump is single-suction,multistage,centrifugal pump,It is widely used for water supply&drainage infields of factories mines and cities.It is provided for delivering clear water without solid particles or other liquid which is physically and chemically similar to clear water. The temperature of the liquid is 0¡ãC~80¡ãC. Permissible inlet pressure is 0.6MPa MD Multistage Pump Features: 1. Stator: The main parts are suction casing, stage casing, discharge casing and diffuser. They are screw up by poles, to become a working house. It is horizontal, the discharge direction is upward; The discharge and suction direction of them are both upwards, and the suction direction is horizontal usually, also they can be made upward according to user's requirement. 2. Rotor: It is consist of shaft, impellers, balance dic and shaft sleeve etc. Shaft supplied power to impellers; The axial force is balanced by balance disc; The sleeve mounted on shaft to protect shaft. 3. Bearing parts: It is consist of bearing body, bearing and bearing cover etc. The bearing of type 85-67, 155-67, 600-60 pump is sliding bearing, lubricated by diluted oil, the other pump bearing is rolling bearing, lubricated by grease. 4. Shaft seal: It is usually adopted soft packing seal, consist of sealing house on suction casing, packing, blocking water ring, the sealing hose have some pressure water, to cool, lubricate and seal pump. The pumps usually adopt mechanical seal. 5. Drive: The pump is driven directly by motor through elastic coupling, the rotation of pump is clockwise looking from motor to pump. MD Multistage Pump Parameter Selection Table: MD Multistage Pump Application: Water supply and discharge in high-rise buildings Fire water supply in constructions Water supply and discharge in factories and mines Long distance delivery Cyclic pressurization in production
Application : Domestic Water Supply, Pressure boosting system, Cooling Systems, Small Industrial Water Supply system, Garden / Fountains, RO Plants, Water Treatment and Purification FEATURES AND BENEFITS Suction and Delivery Chamber Cast Iron with anti corrosive coating Stainless Steel AISI 304 Impellers and Diffusers Stainless Steel Shaft AISI 410 Built in Winding Protector Insulation Class F / B TECHINICAL DATA POWER RANGE : 0.60kw – 1.50kw Flow max 140 lpm (8.4 m3 / hr) Head Max 60 m Suction Lift up to 7m Liquid Temp upto 50° C Motor2 pole Induction motor, 50 Hz, 2900 rpm, single phase 230 v + 5% - 15% Double sealed ball bearings
Horizontal Multistage pump sets
2.0 HP / 6 Stage Horizontal Multistage Pump Total Head - 60 Mtrs Discharge - 30 Mtrs / 4800 Ltrs Supply -A.C Supply - 1 Phase -230 V -50 Hz Motor Body -Aluminium Diecast Motor Frame Motor Laminations -Silicon steel -CRNO Grade Winding Insulation Class -F Class Insulation Rotor -Aluminium Pressure Diecast Rotor Rotor Shaft - SS 410 Winding -Enamelled Copper Winding Wires Impeller - SS 304 Diffuser -SS 304 (Pump Stage Casings) Pump Tie Rod -SS 410 Pump Casting Parts - C.I FG 200 with E.D Coated Pump Distance Sleeves -SS 410
INSTALLATIONS AND USE .For water supply system .For clean non -explosive liquids, without solids, filamentary or abrasive matter and non -aggressive to the pump materials .A universal pump for civil and industrial use, for pressure boosting systems, fire-fighting systems, high-pressure washing...
Special features : Lower power consumption Long durability due to complete ss body Excellent performance even at low voltage Light in weight Attractive outlook With stand with wide voltage fluctuation
Product introduction: VMP type a multistage centrifugal pump, may transport the temperature does not exceed 80 â?? freshwater and seawater. Product features: The structure is compact and reasonable, the installation covers an area of small, light weight, stable operation, easy maintenance, can prevent leakage of liquid to be delivered by a specially designed mechanical seal. The lift of the pump with the series increases in direct proportion to increase, and the corresponding flow will not change. Technical parameters: Lift5-173.2m Flow4-30m/h Field of application: Suitable for fire protection, refrigeration system, industry, agriculture, building water, deep well water, fresh water and sea transport
VERTICAL MULTISTAGE CENTRIFUGAL PUMPS CDL(F)Series is a Sheet metal Stainless Steel Vertical Multistage Centrifugal Pump offered by Huayang. The pumps are driven by standard electrical phase mounted motor. CDL(F) Series pumps are available in complete SS 304 & complete SS 316 material. Pumps are available in I Phase as well as III Phase. Application CDL(F) Series has multifunctional products and can be used to transfer various medium from tap water to industrial liquids at different flow rates & pressure. Main applications include clear liquid transfer water treatment projects to reverse osmosis systems, Pressure boosting systems, High pressure water unit, Fire fighting systems; Boiler feed applications, Spray irrigation etc.
Definition of Model IVM 10-5 IVM - Vertical Multistage Stainless Steel Pump 10 - design capacity (m3/h) 5 - Stage Number
Applications ã?? ã?? Reverse Osmosis System Boiler feed water Fire protection system Booster & Pressurization Set Irrigation & Municipal Water supply
CDL/CDLF is a versatile product that can transport a variety of different media from tap water to industrial liquids, adapted to different temperature, flow and pressure ranges, CDL is suitable for non-corrosive liquids, CDLF is suitable for slightly corrosive liquids. CDL type light vertical multistage centrifugal pump application field Water supply: water plant filtration and transportation, water plant zoning water supply, supercharging, supercharging of high-rise buildings. Industrial pressurization: process water system, cleaning system, high pressure flushing system, fire protection system. Industrial liquid transport: cooling and air-conditioning systems, boiler feedwater and condensing systems, machine tools, acids and alkalis. Water treatment: ultrafiltration system, reverse osmosis system, distillation system, separator, swimming pool. Irrigation: field irrigation, spray irrigation, drip irrigation. CDL type light vertical multistage centrifugal pump operating conditions 1, thin, clean, non-flammable and explosive liquid that does not contain solid particles or fibers. 2, conveying liquid temperature: room temperature type -15 to +70 3, hot water type +70 to +120 4, ambient temperature: high +40 5. Altitude: 1000m high
Product introduction: Type D is a single suction multistage centrifugal pump, conveying not higher than 80 â?? water and physical and chemical properties similar to liquid water Product features: The lift of the pump with the series increases in direct proportion to increase, and the corresponding flow will not change Technical parameters:
Name:api610 bb5 multistage barrel pumps Characteristics Radially split, horizontal multistage centrifugal pump Centerline mounted Diffuser casing Single / double suction, enclosed impeller thrust compensation by balance drum or rotor design with opposed impellers available top-top nozzle arrangement Materials of construction per api 610, Other materials on request Design features Heavy duty process design according to api 610 latest edition (bb5 type) Ring oil lubrication, other methods Of lubrication available Cartridge pull out design available Sleeve / tilt pad bearings design available replaceable wear rings for casing and impeller alternate nozzle arrangements available Fan cooling available Special design for decoking service available low npsh double suction design available Operating limits Capacity up to 2, 000 Head up to 4, 572 m Discharge flange size 2 to 12 in max. Pressure 30mpa Temperature 450 Applications Hydrocarbons chemical solutions water Seawater Decoking jet service charge pumps descaling service pumps
D type cast iron and ss multistage boiler feeding pump and clean water pump D type multistage boiler feeding pump overview: It is widely applied to supply water of low or high pressure boiler. It is also used for high pressure water supply and drainage of industrial and urban. The temperature of medium delivered should be in the range of -20°c to 150°c and the water pump inlet pressure should be less than 0.6m pa. Product feature: 1. About d model pumps, inlet and exit are both vertically upward. The inlet section, middle section, discharge section and bearing body of pump are connected into one by tightening bolt. Customer can decide the pump stage according to pump head. 2. The rotor part of pump is composed of axis, impeller, shaft sleeve and balance disk, etc. The quantity of impeller is decided by the stage quantity of pump. The components of axis are connected by flat key and spindle nuts. The whole rotor is supported by antifriction bearing or sliding bearing. Balance disc bears axial force instead of bearing. When pump is running, the rotor can move in the same axial direction. Annular ball bearing can not be used about this series of pumps. They are adopted antifriction bearing. Antifriction bearing is lubricated by grease and sliding bearing is lubricated by thin oil. In addition, they can lubricate themselves by oil ring and cool themselves by circulation water. D type pump Dg boiler feeding pump
Flow: 25m3/h Head: 78m Power: 9.2kw Material: cast iron Medium: clean water Outlet dia: 60mm Diameter: 175mm Speed: 2850r/min Voltage: 380V Phase: 3 phase/50Hz Color: Blue Deep well submersible water pump Overview: Filed with: water Flow range: 10—250m3/h; Head range:5—121m; Diameter scope:f30—f150mm; Temperature range: =30?. Deep well submersible water pump is widely used in various kinds of water conservancy facilities such as farm irrigation, sprinkler irrigation with water, the supply and drainage system of civil building and, industrial and draining water from the hills and mountainous area, the diversion in low-lying areas, water supply and drainage in urban and rural industrial and mining enterprises etc. Deep well submersible water pump spare parts &features: Deep well submersible water pump motor and pump assembled into one. Deep well submersible water pump has simple structure, easy to use and maintenance. Electric motor is three-phase asynchronous motor. Safe and reliable operation, no pollution to water. Installation of deep well submersible water pump 1. 380V voltage deviation is no more than ±5%, frequency is 50HZ, three -phase power deviation is no more than ±1%. 2. Motorcavity must be filled with water to cooling motor and lubricate bearings . 3. The first stage impeller of the pump should be more than 2mm below the moving water surface, pump unit should be less than 70m below the static water level. 4. The distance from the motor bottom to well bottom must be more than 3m. 5. Water temperature should be no more than 20°C. 6. Sand content of the water ( by mass) should be no more than 0.01%. 7. PH value of water 6.5-8.5. 8. Hydrogen sulfide content of the water should be no more than 1.5mg/L. 9. Chloride ion content of the water should be no more than 400mg/L. 10. Water yield of water source should ensure the requirements of pump continuous working.
Flow: 25m3/h Head: 78m Power: 9.2kw Material: cast iron Medium: clean water Outlet dia: 60mm Diameter: 175mm Speed: 2850r/min Voltage: 380V Phase: 3 phase/50Hz Color: Blue Deep well submersible water pump Overview: Filed with: water Flow range: 10—250m3/h; Head range:5—121m; Diameter scope:f30—f150mm; Temperature range: =30?. Deep well submersible water pump is widely used in various kinds of water conservancy facilities such as farm irrigation, sprinkler irrigation with water, the supply and drainage system of civil building and, industrial and draining water from the hills and mountainous area, the diversion in low-lying areas, water supply and drainage in urban and rural industrial and mining enterprises etc. Deep well submersible water pump spare parts &features: Deep well submersible water pump motor and pump assembled into one. Deep well submersible water pump has simple structure, easy to use and maintenance. Electric motor is three-phase asynchronous motor. Safe and reliable operation, no pollution to water. Installation of deep well submersible water pump 1. 380V voltage deviation is no more than ±5%, frequency is 50HZ, three -phase power deviation is no more than ±1%. 2. Motorcavity must be filled with water to cooling motor and lubricate bearings . 3. The first stage impeller of the pump should be more than 2mm below the moving water surface, pump unit should be less than 70m below the static water level. 4. The distance from the motor bottom to well bottom must be more than 3m. 5. Water temperature should be no more than 20°C. 6. Sand content of the water ( by mass) should be no more than 0.01%. 7. PH value of water 6.5-8.5. 8. Hydrogen sulfide content of the water should be no more than 1.5mg/L. 9. Chloride ion content of the water should be no more than 400mg/L. 10. Water yield of water source should ensure the requirements of pump continuous working.
Flow: 10m3/h Head: 165m Power: 11kw Material: cast iron Medium: clean water Outlet dia: 32mm Diameter: 175mm Speed: 2850r/min Voltage: 380V Phase: 3 phase/50Hz Color: Blue QJ Submersible pumps Parameters: Flow range10~500m3/h, Lift scope within 5~405m; Caliber scope 32~203mm, Temperature range-15~80° C. Products Overview: QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation. Product use conditions: QJ Submersible pumps use conditions 1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply. 2. Electrical cavity must be filled with water. 3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m. 4. Electrical from the bottom of the bottom of the well shall be not less than 3 m. 5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C. 6. Water and sand content (by mass) of not more than 0.01%. 7. Water PH 6.5-8.5. 8. The hydrogen sulfide in water content is not more than 1.5 mg / L. Application : deep well water farm irrigation sprinkling irrigation urban and rural industry mine supply and drainage. Shenlong pump Ltd is located at the beautiful shore of the Yellow River and at the foot of the mountains of Mangshan, ZhengZhou City in the heart of Henan province. The company was created in the 1980s, And after the company's combined relentless efforts has become one of the largest modern enterprises in Henan that combines Research and Development (R&D), Prototype Design, Product testing, Advanced industrial production, and operational excellence. Shenlong pump Ltd is a design manufacture export professional company. Our Enterprise is Ministry of Agriculture. We are production and sales pumps around the world. The manufacture have strong technical force, with all kinds of machine tools, planer, drill press, etc. and The manufacture's total land area of over 660000 Square meters and with in excess of 300 equipment sets. Employing 860 staff members; amongst them over 40 senior technical experts. The allocation of B-level exceeds the national standard of computer Pump testing centers.
Product introduction: KDL series vertical multistage centrifugal pump is a new development of a new generation of multistage pump products, its excellent water properties and structure ensures that the user can effectively reduce the operation cost of pump in a variety of applications. Product features: This type of pump belongs to a multistage centrifugal pump, vertical section, closed impeller. It has the advantages of compact structure, light weight, small occupation area, low noise and vibration, high reliability. Pump shape by the national patent (ZL023728434) protection. Technical parameters: Lift:7.5-360m Flow1.8-350m/h Field of application: For pumping water and impurities without solid particles in the liquid, can be applied in water or water, liquid pressure device, circulation and cooling system, fire stations, refineries, irrigation, high pressure water station, building water supply etc..
