Main technical parameters Model no.: Sdt-sf24a10t(e) Rated charge current 10a Rated load current 10a System voltage 24v/12v auto switch; Max solar input voltage 60v 100v 100v Max pv input power 130w@12v 260w@24v Energy conversion efficiency Max 98% Protection for over load and short circuit 1.25rated load current 60sec. 1.5 rated loads 5sec ¡ý3rated current short circuit protection action No load consumption ¡ü30 ma Charge circuit voltage drop ¡ü0.26v Discharge circuit voltage drop ¡ü0.15v Over voltage protection 17v, ¡á2/24v; Work temperature Industry stage:-35¡ãc to +55¡ãc; Boost charge voltage 14.6v;¡á2/24v;(only when over discharge) Direct charge voltage 14.4v; ¡á2/24v; Float charge voltage 13.6v; ¡á2/24v;(keep time:until drop to charge return voltage) Charge return voltage 13.2v; ¡á2/24v; Temperature compensation -5mv/¡ãc/2v(boost charge, direct charge, float charge, charge return voltage) Lower voltage indicate 12.0v; ¡á2/24v; Over discharge voltage 11.1v; ¡á2/24v; Control mode (mppt)maximum power point tracking Weight:0.5kg
MPPT (Maximum Power Point Tracking)Solar Charge Controller offer an efficient, safe, multi-stage recharging process that prolongs battery life and assures peak performance from a solar array. Each Charge Controller allows customized battery recharging. LCD display , easy to operate on LCD screen Multi stage charging (3-stage charging , parallel charging and equalized charging function) BTS - Battery remote temperature sensor terminalEnable to charge Li-thium, Gel , lead-acid battery With RS485 & USB communication port Protection: PV array short circuit, PV reverse polarity, Battery reverse polarity, Over charging, Output short circuit
MPPT (Maximum Power Point Tracking)Solar Charge Controller offer an efficient, safe, multi-stage recharging process that prolongs battery life and assures peak performance from a solar array. Each Charge Controller allows customized battery recharging. LCD display , easy to operate on LCD screen Multi stage charging (3-stage charging , parallel charging and equalized charging function) BTS - Battery remote temperature sensor terminal Enable to charge Li-thium, Gel , lead-acid battery With RS485 & USB communication port Protection: PV array short circuit, PV reverse polarity, Battery reverse polarity, Over charging, Output short circuit
Max Charging Current - 5A Charger Type - MPPT L*B*H - 100*83 Housing - Metal Input Voltage - 12V / 11.1V / 12.8V
We choose high speed and high performance 32-bit processor with excellent EMC design Advanced MPPT tracking algorithm, the tracking efficiency more than 99% High performance IGBT power module as electronic switch, there is no any mechanical switch, plus multiphase synchronous rectification technology, improves the stable greatly Ultrafast maximum power point tracking speed to ensure tracking efficiency Accurate identification and tracking of multi-peak maximum power points With current-limiting charging function, charging current can be set, friendly and compatible with various capacity batteries. Widely PV arrays voltage input, this can save the cost of PV combiner box, wires and construction Full enclosed duct design and high-speed fan for cooling makes the controller suitable for various harsh environment It shows the ambient temperature. It also has automatic temperature compensation function and RTC real time function The perfect battery protection function and multi-stage charging improves battery life It has the statistical function of generating capacity which is very convenient for customers to view the daily, monthly and total charging capacity of the controller. Complete menu display and operation, plus the humanized design of browsing interface, these makes the operation more easy It can work with GEL. LEAD-ACID, LITHIUM and other type battery Twice protection function to protect battery from damage when the power switch is down (optional) Standard Modbus communication protocol for RS-485 or GPRS communication to extend the communication distance (optional function)
MPPT Solar charge controller Feature 1. We choose high speed and high performance 32-bit processor with excellent EMC design 2. Advanced MPPT tracking algorithm, the tracking efficiency more than 99% 3. High performance IGBT power module as electronic switch, there is no any mechanical switch, plus multiphase synchronous rectification technology, improves the stable greatly 4. Ultrafast maximum power point tracking speed to ensure tracking efficiency 5. Accurate identification and tracking of multi-peak maximum power points 6. With current-limiting charging function, charging current can be set, friendly and compatible with various capacity batteries. 7. Widely PV arraysâ?? voltage input, this can save the cost of PV combiner box, wires and construction 8. Full enclosed duct design and high-speed fan for cooling makes the controller suitable for various harsh environment 9. It shows the ambient temperature. It also has automatic temperature compensation function and RTC real time function 10. The perfect battery protection function and multi-stage charging improves battery life 11. It has the statistical function of generating capacity which is very convenient for customers to view the daily, monthly and total charging capacity of the controller. 12. Complete menu display and operation, plus the humanized design of browsing interface, these makes the operation more easy 13. It can work with GEL. LEAD-ACID, LITHIUM and other type battery 14. Twice protection function to protect battery from damage when the power switch is down (optional) 15. Standard Modbus communication protocol for RS-485 or GPRS communication to extend the communication distance (optional function)
Product introduction: 1, MPPT lithium battery solar street light controller automatically adapts to 12V and 24V systems. 2, built-in boost type constant current source, the efficiency can reach above 95%. 3, with 4 working modes, working time and LED lamp brightness can be adjusted. 4, with infrared remote control function, all parameters can be set using a remote control key. Can also be used to set the button, directly 5, displayed on the digital tube. 6. The integrated street light controller has a smart power-down function to extend the working hours of the LED lights. 7. High-efficiency PWM charging technology is adopted to ensure that the battery is working in the best condition, which greatly prolongs the service life of the battery and has high-accuracy temperature compensation. 9, with overcharge, over discharge, electronic short circuit, overload protection, anti-reverse protection. 10, full plastic, metal body, waterproof and drop, to deal with various harsh environments.
Pure sine wave output Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc). Built-in MPPT solar charge controller MAX PV Array Open Circuit Voltage: 450V Can provide the power to the load without battery Combining solar system, AC utility, and battery power source to supply continuous power Overload, short circuit and Deep discharge protection Cold start function Support USB, RS485 monitoring function Parallel operation with up to 3 units WIFI remote monitoring (optional) PV1800 PRO is a multi-function inverter/charger, combining functions of inverter, MPPT solar charger and battery charger to offer uninterruptible power support in portable size. PV1800 PRO Series can run without battery. The Maximum PV array open circuit voltage can reach 450V and MPPT voltage is 150~430Vdc, which Can help customers make full use of solar energy.
Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc). Built-in MPPT solar charge controller MAX PV Array Open Circuit Voltage: 450V Can provide the power to the load without battery Combining solar system, AC utility, and battery power source to supply continuous power Overload, short circuit and Deep discharge protection Cold start function Support USB, RS485 monitoring function Parallel operation with up to 3 units WIFI remote monitoring (optional) PV1800 PRO is a multi-function inverter/charger, combining functions of inverter, MPPT solar charger and battery charger to offer uninterruptible power support in portable size. PV1800 PRO Series can run without battery. The Maximum PV array open circuit voltage can reach 450V and MPPT voltage is 150~430Vdc, which Can help customers make full use of solar energy.
Rated power: 1-5KW Pure sine wave output Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc). Bult in MPPT 60A/80A solar charge controller Combining solar system, AC utility, and battery power source to supply continuous power Overload, short circuit and Deep discharge protection Cold start function Support USB, RS485 monitoring function WIFI remote monitoring (optional) Compatible to generator This is a multi-function inverter/charger, combining functions of inverter, MPPT 60A/80A solar charger and battery charger to offer uninterruptible power support with portable size. Its comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications.
Rated power: 1-5KW Pure sine wave output Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc). Bult in MPPT 60A/80A solar charge controller Combining solar system, AC utility, and battery power source to supply continuous power Overload, short circuit and Deep discharge protection Cold start function Support USB, RS485 monitoring function WIFI remote monitoring (optional) Compatible to generator Support parallel operation up to 3 units (available for 3KW-5KW 48V) This is a multi-function inverter/charger, combining functions of inverter, MPPT 60A/80A solar charger and battery charger to offer uninterruptible power support with portable size. Its comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications.
Max Charging Current - 5A Charger Type - MPPT L*B*H - 100*83 Housing - Metal Input Voltage - 12V / 11.1V / 12.8V
Max Solar Panel Voltage - 50V Max Charging Current - 10A Charger Type - PWM L*B*H - 100*105*35 Housing - Metal
We are one of the most noted organizations engaged in offering MPPT Solar Charge Controller. This device is used in effective conversion of high voltage DC output from solar panels (and a few wind generators) down to the lower voltage that is needed to charge batteries. These optimization devices are precision engineered by technical experts are in conformation with industrial standards. Features: High efficiency DIN Rail compatible Negative ground
We hold strong market reputation in offering MPPT Solar Charge Controller. This electronic equipment is designed and developed at par with recommended industrial specification. Our product is offered in proper packaging and requisite current specifications to the clients. Further, this device is available at industry leading rates. Features: High performance Operational fluency Accurate positioning
With our years of expertise and skills in this field, we are providing a large array of Maximum Power Point Tracker. The product we provide is used in solar electric charge controllers. This Maximum Power Point Tracker extracts maximum available power from PV module. Features: Completely tested Top notch quality Reasonable price
Off grid Rated power: 1000W Dimension(W/H/D): 225*355*92mm Net weight: 5kgs LCD display This is a multi-function inverter/charger, combining functions of inverter, MPPT 60A/80A solar charger and battery charger to offer uninterruptible power support with portable size. Its comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications.
Features : 3 times peak power, excellent loading capability. Combine inverter/solar controller/battery all in one. Multiple output : 2*AC output socket, 4*DC 12V, 2* Working mode AC prior/ECO mode/Solar prior selectable AC charging current 0 1 0A selectable. LVD/HVD/Charging voltage adjutable, suitable for kinds of battery Adding fault code to monitor real time work situations Continuous stable p ure sine wave output with inbuilt AVR stabilizer . Digital LCD and LED for visualization of operation status of the equipment. Inbuilt automatic AC charger and AC mains switcher, stwitch time 4ms
Features : 3 times peak power, excellent loading capability. Combine inverter/solar controller/battery all in one. Multiple output : 2*AC output socket, 4*DC 12V, 2* Working mode AC prior/ECO mode/Solar prior selectable AC charging current 0 1 0A selectable. LVD/HVD/Charging voltage adjutable, suitable for kinds of battery Adding fault code to monitor real time work situations Continuous stable p ure sine wave output with inbuilt AVR stabilizer . Digital LCD and LED for visualization of operation status of the equipment. Inbuilt automatic AC charger and AC mains switcher, stwitch time 4ms
Features : 3 times peak power, excellent loading capability. Combine inverter/solar controller/battery all in one. Multiple output : 2*AC output socket, 4*DC 12V, 2* Working mode AC prior/ECO mode/Solar prior selectable AC charging current 0 1 0A selectable. LVD/HVD/Charging voltage adjutable, suitable for kinds of battery Adding fault code to monitor real time work situations Continuous stable p ure sine wave output with inbuilt AVR stabilizer . Digital LCD and LED for visualization of operation status of the equipment. Inbuilt automatic AC charger and AC mains switcher, stwitch time 4ms
