An excavator plus a crusher bucket becomes a small mobile crushing station with low cost and high maneuverability. The jaw crusher adopts the driving method of the imported hydraulic motor directly connected to the drive shaft, which has large crushing force and excellent performance. The crushed stone size can be adjusted according to needs, high efficiency and improved construction quality. A multi-purpose machine, especially for the crushing and recycling of building concrete and the construction of mountain roads, with good flexibility and cost advantages The jaw crusher adopts advanced hydraulic technology. The motor is driven to rotate the concrete to crush the concrete, stones, etc., so that the scraps that meet the set requirements are discharged from the discharge opening, and the steel bars smaller than the discharge opening can also be simultaneously Discharge from the discharge opening.
MONDE Excavator Crusher Buckets is a piece of equipment that works by taking advantage of the hydraulic system of the excavators, skid loader, loader and backhoe loaders to which it is fitted. Excavator Crusher Buckets have many areas of applications: from building demolitions in general, to the requalification of former industrial and urban areas to the processing of excavation materials, from the earth movement sector to road works, from quarries to mines, from environmental reclamation to applications on rocky soil,including brick, concrete and rock.
Feartures (1) Direct drive with hydraulic motor for higher transmission efficiency and easier maintenance. (2)� The crusher bucket adopts Swedish imported high-strength wear-resistant plate as a whole, with high structural strength and small product weight. (3)� The upper and lower jaws can be exchanged for use, and the front and rear of the single forehead can also be exchanged for use, which greatly prolongs the service life of the product. (4) The product design is derived from Japan's Ueda Co., Ltd. The core components of the hydraulic motor and the eccentric shaft mechanism are imported from Japan, and the quality is stable and reliable. (5) The size of the discharge opening can be easily adjusted from 15-120 mm. Packing 1. We pack the products by simple pallet or case which is seaworthy. 2. Fast delivery time: 5-7 days for small quantity, and 20-30 days for container quantity. 3. We have a team specialized in packing and loading container, they have rich experience, and can load the max quantity products, which can help customer save the ocean freight. Company Shandong Mingde Machinery co., Ltd produce many kinds of excavator attachments such as: buckets, ripper, boom & arm, grapple, quick coupler, hydraulic shear, hydraulic clamp, hydraulic vibration hammer, hydraulic crusher, milling machine, screener, strength boom & arm, tamping bucket, bulldozer shovel, bulldozer push beam, bulldozer ripper, loader bucket, loader timer grapple, show shovel etc. We have many kinds of top quality attachments products to fit all type of excavators, bulldozers and loaders. Also, we have our own import/export company, our products are exported to all over the world, based on our quality and the best after-service. In the year 2011, Shandong Mingde Machinery Co,Ltd has set up joint venture with a HongKong Investment Co. Ltd namely Shandong Mingde Gangcheng Machinery Co.,Ltd with WMS brand. Now our company has two brand names and so we will try our best to develop the international market in future. FAQ Q: What is the productivity by tons(or m�³)? A: For 20 tons excavator, it can produce 15-22 tons per hour. * Different types of crusher bucket, different production capacity. Q: What are the wearing parts? A: We'll take some parts when we ship them. If you need additional wearing parts, you can choose a set jaw plate.If you need others,you can tell our salesman. Q: What are the unique advantages of crusher bucket? A: *We are the first manufacturer of crusher bucket in China.It is adopted Japanese full set of drawings and technology. * The front and back jaw plates are interchangeable. * All are made of Sweden Hardox steel.The core hydraulic parts are all imported from Japan. There are other advantages as well. You can contact us, we will do more detailed explanation for you. Q: How long will it take to delivery? A: We have plenty in stock. Lead time: 2-3 days. Customized samples: About 7-10 days.
We have USED DANA SPICER 212/272 AXLE FOR WHEEL EXCAVATOR And it can also be used in larger capacity excavator The conditons are excellent
Features A heavy-duty or severe-duty bucket is usually made from high-strength, abrasion-resistant steel. Because of their superior durability, these attachments are often used in rock quarries to load trucks with high-density material in fewer passes. Packing 1. We pack the products by simple pallet or case which is seaworthy. 2. Fast delivery time: 5-7 days for small quantity, and 20-30 days for container quantity. 3. We have a team specialized in packing and loading container, they have rich experience, and can load the max quantity products, which can help customer save the ocean freight. Company Shandong Mingde Machinery co., Ltd produce many kinds of excavator attachments such as: buckets, ripper, boom & arm, grapple, quick coupler, hydraulic shear, hydraulic clamp, hydraulic vibration hammer, hydraulic crusher, milling machine, screener, strength boom & arm, tamping bucket, bulldozer shovel, bulldozer push beam, bulldozer ripper, loader bucket, loader timer grapple, show shovel etc. We have many kinds of top quality attachments products to fit all type of excavators, bulldozers and loaders. Also, we have our own import/export company, our products are exported to all over the world, based on our quality and the best after-service. In the year 2011, Shandong Mingde Machinery Co,Ltd has set up joint venture with a HongKong Investment Co. Ltd namely Shandong Mingde Gangcheng Machinery Co.,Ltd with WMS brand. Now our company has two brand names and so we will try our best to develop the international market in future.
Features (1) Direct drive with hydraulic motor for higher transmission efficiency and easier maintenance. (2)� The crusher bucket adopts Swedish imported high-strength wear-resistant plate as a whole, with high structural strength and small product weight. (3)� The upper and lower jaws can be exchanged for use, and the front and rear of the single forehead can also be exchanged for use, which greatly prolongs the service life of the product. (4) The product design is derived from Japan's Ueda Co., Ltd. The core components of the hydraulic motor and the eccentric shaft mechanism are imported from Japan, and the quality is stable and reliable. (5) The size of the discharge opening can be easily adjusted from 15-120 mm. Packing 1. We pack the products by simple pallet or case which is seaworthy. 2. Fast delivery time: 5-7 days for small quantity, and 20-30 days for container quantity. 3. We have a team specialized in packing and loading container, they have rich experience, and can load the max quantity products, which can help customer save the ocean freight. Company Shandong Mingde Machinery co., Ltd produce many kinds of excavator attachments such as: buckets, ripper, boom & arm, grapple, quick coupler, hydraulic shear, hydraulic clamp, hydraulic vibration hammer, hydraulic crusher, milling machine, screener, strength boom & arm, tamping bucket, bulldozer shovel, bulldozer push beam, bulldozer ripper, loader bucket, loader timer grapple, show shovel etc. We have many kinds of top quality attachments products to fit all type of excavators, bulldozers and loaders. Also, we have our own import/export company, our products are exported to all over the world, based on our quality and the best after-service. FAQ Q: What is the productivity by tons(or m�³)? A: For 20 tons excavator, it can produce 15-22 tons per hour. * Different types of crusher bucket, different production capacity. Q: What are the wearing parts? A: We'll take some parts when we ship them. If you need additional wearing parts, you can choose a set jaw plate.If you need others,you can tell our salesman. Q: What are the unique advantages of crusher bucket? A: *We are the first manufacturer of crusher bucket in China.It is adopted Japanese full set of drawings and technology. * The front and back jaw plates are interchangeable. * All are made of Sweden Hardox steel.The core hydraulic parts are all imported from Japan. There are other advantages as well. You can contact us, we will do more detailed explanation for you. Q: How long will it take to delivery? A: We have plenty in stock. Lead time: 2-3 days. Customized samples: About 7-10 days.
Features An excavator grapple and dig bucket all-in-one, the Mingde Grab Bucket is the perfect tool for land clearing and demolition jobsites. Features dual thumb cylinders on the bucket for greater gripping force that follows the bucket throughout the entire curl cycle. The thumb is mounted directly to the bucket giving you superior machine versatility by allowing you to drop the entire thumb and bucket assembly as one piece. Packing 1. We pack the products by simple pallet or case which is seaworthy. 2. Fast delivery time: 5-7 days for small quantity, and 20-30 days for container quantity. 3. We have a team specialized in packing and loading container, they have rich experience, and can load the max quantity products, which can help customer save the ocean freight. Company Shandong Mingde Machinery co., Ltd produce many kinds of excavator attachments such as: buckets, ripper, boom & arm, grapple, quick coupler, hydraulic shear, hydraulic clamp, hydraulic vibration hammer, hydraulic crusher, milling machine, screener, strength boom & arm, tamping bucket, bulldozer shovel, bulldozer push beam, bulldozer ripper, loader bucket, loader timer grapple, show shovel etc. We have many kinds of top quality attachments products to fit all type of excavators, bulldozers and loaders. Also, we have our own import/export company, our products are exported to all over the world, based on our quality and the best after-service. In the year 2011, Shandong Mingde Machinery Co,Ltd has set up joint venture with a HongKong Investment Co. Ltd namely Shandong Mingde Gangcheng Machinery Co.,Ltd with WMS brand. Now our company has two brand names and so we will try our best to develop the international market in future.
Features An excavator grapple and dig bucket all-in-one, the Mingde Grab Bucket is the perfect tool for land clearing and demolition jobsites. Features dual thumb cylinders on the bucket for greater gripping force that follows the bucket throughout the entire curl cycle. The thumb is mounted directly to the bucket giving you superior machine versatility by allowing you to drop the entire thumb and bucket assembly as one piece. Packing 1. We pack the products by simple pallet or case which is seaworthy. 2. Fast delivery time: 5-7 days for small quantity, and 20-30 days for container quantity. 3. We have a team specialized in packing and loading container, they have rich experience, and can load the max quantity products, which can help customer save the ocean freight. Company Shandong Mingde Machinery co., Ltd produce many kinds of excavator attachments such as: buckets, ripper, boom & arm, grapple, quick coupler, hydraulic shear, hydraulic clamp, hydraulic vibration hammer, hydraulic crusher, milling machine, screener, strength boom & arm, tamping bucket, bulldozer shovel, bulldozer push beam, bulldozer ripper, loader bucket, loader timer grapple, show shovel etc. We have many kinds of top quality attachments products to fit all type of excavators, bulldozers and loaders. Also, we have our own import/export company, our products are exported to all over the world, based on our quality and the best after-service. In the year 2011, Shandong Mingde Machinery Co,Ltd has set up joint venture with a HongKong Investment Co. Ltd namely Shandong Mingde Gangcheng Machinery Co.,Ltd with WMS brand. Now our company has two brand names and so we will try our best to develop the international market in future.
Features An excavator grapple and dig bucket all-in-one, the Mingde Grab Bucket is the perfect tool for land clearing and demolition jobsites. Features dual thumb cylinders on the bucket for greater gripping force that follows the bucket throughout the entire curl cycle. The thumb is mounted directly to the bucket giving you superior machine versatility by allowing you to drop the entire thumb and bucket assembly as one piece. Packing 1. We pack the products by simple pallet or case which is seaworthy. 2. Fast delivery time: 5-7 days for small quantity, and 20-30 days for container quantity. 3. We have a team specialized in packing and loading container, they have rich experience, and can load the max quantity products, which can help customer save the ocean freight. Company Shandong Mingde Machinery co., Ltd produce many kinds of excavator attachments such as: buckets, ripper, boom & arm, grapple, quick coupler, hydraulic shear, hydraulic clamp, hydraulic vibration hammer, hydraulic crusher, milling machine, screener, strength boom & arm, tamping bucket, bulldozer shovel, bulldozer push beam, bulldozer ripper, loader bucket, loader timer grapple, show shovel etc. We have many kinds of top quality attachments products to fit all type of excavators, bulldozers and loaders. Also, we have our own import/export company, our products are exported to all over the world, based on our quality and the best after-service. In the year 2011, Shandong Mingde Machinery Co,Ltd has set up joint venture with a HongKong Investment Co. Ltd namely Shandong Mingde Gangcheng Machinery Co.,Ltd with WMS brand. Now our company has two brand names and so we will try our best to develop the international market in future.
Features Clamshell bucket is the bucket that can open and close to grasp the sediment and all kinds of bulk cargo.It is a kind of spreader that mainly rely on the left and right two combined bucket or multiple jaw opening crawl and unloading materials.The grab overall structure is light and durable,offering high grabbing ratio,strong closing force and high material filling rate. Packing 1. We pack the products by simple pallet or case which is seaworthy. 2. Fast delivery time: 5-7 days for small quantity, and 20-30 days for container quantity. 3. We have a team specialized in packing and loading container, they have rich experience, and can load the max quantity products, which can help customer save the ocean freight. Company Shandong Mingde Machinery co., Ltd produce many kinds of excavator attachments such as: buckets, ripper, boom & arm, grapple, quick coupler, hydraulic shear, hydraulic clamp, hydraulic vibration hammer, hydraulic crusher, milling machine, screener, strength boom & arm, tamping bucket, bulldozer shovel, bulldozer push beam, bulldozer ripper, loader bucket, loader timer grapple, show shovel etc. We have many kinds of top quality attachments products to fit all type of excavators, bulldozers and loaders. Also, we have our own import/export company, our products are exported to all over the world, based on our quality and the best after-service. In the year 2011, Shandong Mingde Machinery Co,Ltd has set up joint venture with a HongKong Investment Co. Ltd namely Shandong Mingde Gangcheng Machinery Co.,Ltd with WMS brand. Now our company has two brand names and so we will try our best to develop the international market in future. In 2012, we have further cooperation with Japan Ueda Industries Co, Ltd to produce "Bucket Crusher", "Calm Screener", "Vibro Bucket" and many other types of attachments, so that we can provide much more cost-effective products and the best after sales service for our customers.
Feartures Preliminary screening of waste materials, demolition, excavation and re-filling, and soil rebuilding of rocky land. The screening bucket is suitable for sorting natural materials before and after comminution, reducing the comminution time by 60%, so that materials that are compatible with the type of processing required can be recycled and managed. With the inching hydraulic system, even wet materials can be screened, increasing production by 30% year-on-year. It is suitable for gravel screening and beach cleaning in waterways. It is a good assistant for screening fine debris blocks. The size of the sorting screen can be adjusted by changing the screen. Screen sizes from 10mm to 150mm are available. Can be made according to customer needs. 1. The mesh hole is not easy to block. 2. The operation is stable and the noise is low. 3. Simple structure and convenient maintenance. 4. The screening cylinder can be rotated forward and backward for easy screening. 5. The reliability of the whole machine is high, and the one-time investment is less. 6, the use of special mesh, high screening efficiency, long service life. Packing 1. We pack the products by simple pallet or case which is seaworthy. 2. Fast delivery time: 5-7 days for small quantity, and 20-30 days for container quantity. 3. We have a team specialized in packing and loading container, they have rich experience, and can load the max quantity products, which can help customer save the ocean freight. Company Shandong Mingde Machinery co., Ltd produce many kinds of excavator attachments such as: buckets, ripper, boom & arm, grapple, quick coupler, hydraulic shear, hydraulic clamp, hydraulic vibration hammer, hydraulic crusher, milling machine, screener, strength boom & arm, tamping bucket, bulldozer shovel, bulldozer push beam, bulldozer ripper, loader bucket, loader timer grapple, show shovel etc. We have many kinds of top quality attachments products to fit all type of excavators, bulldozers and loaders. Also, we have our own import/export company, our products are exported to all over the world, based on our quality and the best after-service. In the year 2011, Shandong Mingde Machinery Co,Ltd has set up joint venture with a HongKong Investment Co. Ltd namely Shandong Mingde Gangcheng Machinery Co.,Ltd with WMS brand. Now our company has two brand names and so we will try our best to develop the international market in future. In 2012, we have further cooperation with Japan Ueda Industries Co, Ltd to produce "Bucket Crusher", "Calm Screener", "Vibro Bucket" and many other types of attachments, so that we can provide much more cost-effective products and the best after sales service for our customers.
Feartures Preliminary screening of waste materials, demolition, excavation and re-filling, and soil rebuilding of rocky land. The screening bucket is suitable for sorting natural materials before and after comminution, reducing the comminution time by 60%, so that materials that are compatible with the type of processing required can be recycled and managed. With the inching hydraulic system, even wet materials can be screened, increasing production by 30% year-on-year. It is suitable for gravel screening and beach cleaning in waterways. It is a good assistant for screening fine debris blocks. The size of the sorting screen can be adjusted by changing the screen. Screen sizes from 10mm to 150mm are available. Can be made according to customer needs. 1. The mesh hole is not easy to block. 2. The operation is stable and the noise is low. 3. Simple structure and convenient maintenance. 4. The screening cylinder can be rotated forward and backward for easy screening. 5. The reliability of the whole machine is high, and the one-time investment is less. 6, the use of special mesh, high screening efficiency, long service life. Packing 1. We pack the products by simple pallet or case which is seaworthy. 2. Fast delivery time: 5-7 days for small quantity, and 20-30 days for container quantity. 3. We have a team specialized in packing and loading container, they have rich experience, and can load the max quantity products, which can help customer save the ocean freight. Company Shandong Mingde Machinery co., Ltd produce many kinds of excavator attachments such as: buckets, ripper, boom & arm, grapple, quick coupler, hydraulic shear, hydraulic clamp, hydraulic vibration hammer, hydraulic crusher, milling machine, screener, strength boom & arm, tamping bucket, bulldozer shovel, bulldozer push beam, bulldozer ripper, loader bucket, loader timer grapple, show shovel etc. We have many kinds of top quality attachments products to fit all type of excavators, bulldozers and loaders. Also, we have our own import/export company, our products are exported to all over the world, based on our quality and the best after-service. In the year 2011, Shandong Mingde Machinery Co,Ltd has set up joint venture with a HongKong Investment Co. Ltd namely Shandong Mingde Gangcheng Machinery Co.,Ltd with WMS brand. Now our company has two brand names and so we will try our best to develop the international market in future. In 2012, we have further cooperation with Japan Ueda Industries Co, Ltd to produce "Bucket Crusher", "Calm Screener", "Vibro Bucket" and many other types of attachments, so that we can provide much more cost-effective products and the best after sales service for our customers.
1 x Used Hitachi ZX130LCN-6 Excavator. Year of Manufacture: 2018. Specification: 14,400kg, Hydraulic Quick Coupler, Auxiliary Line, Boom & Dipper Check Valves, A/C, Heated Seat, Good Undercarriage Approximately 70% good. EPA & CE Machine. Working Hours: 5,900. Price: Euro 38,500 GBP ex works United Kingdom. Machine Location: West Yorkshire, United Kingdom Origin: The Netherlands, European Union. Minimum Order: 1 Unit Available. Shipping Terms: Ex Works United Kingdom. Price is Ex Works United Kingdom. We are happy to provide transportation & Shipping Prices should you require this. Payment Terms: 100% TT Before Shipping
100% virgin PP. More details and items just send inquire to us.
100% new PP. Handle: metal or plastic Lid:with mouth or no mouth.
Sugar, urea and rock phosphate, ductile iron pipes and fittings, carbon steel pipes and fittings, surge arresters and composite insulators (11 223 kv), heavy machinery attachments for excavators and skid loaders, fuel oil, pet coke and iron pellets, aerosol fire suppression devices, rare earth minerals and products.Consultancy services, business set up, facilitating, brokerage, contracting for electromechanical work in abu dhabi
Features Available for all sizes of excavator, Rock Buckets will withstand far higher impact and abrasion than standard or HD spec. They are particularly important on larger machines - 20 tonnes upwards - where machine tearout power is more than capable of destroying buckets in hard ground. Packing 1. We pack the products by simple pallet or case which is seaworthy. 2. Fast delivery time: 5-7 days for small quantity, and 20-30 days for container quantity. 3. We have a team specialized in packing and loading container, they have rich experience, and can load the max quantity products, which can help customer save the ocean freight. Company Shandong Mingde Machinery co., Ltd produce many kinds of excavator attachments such as: buckets, ripper, boom & arm, grapple, quick coupler, hydraulic shear, hydraulic clamp, hydraulic vibration hammer, hydraulic crusher, milling machine, screener, strength boom & arm, tamping bucket, bulldozer shovel, bulldozer push beam, bulldozer ripper, loader bucket, loader timer grapple, show shovel etc. We have many kinds of top quality attachments products to fit all type of excavators, bulldozers and loaders. Also, we have our own import/export company, our products are exported to all over the world, based on our quality and the best after-service. In the year 2011, Shandong Mingde Machinery Co,Ltd has set up joint venture with a HongKong Investment Co. Ltd namely Shandong Mingde Gangcheng Machinery Co.,Ltd with WMS brand. Now our company has two brand names and so we will try our best to develop the international market in future.
Features A general-purpose bucket has the most versatility and is appropriate for many excavating tasks. It is also known as a digging bucket, and it is the standard attachment that comes with an excavator. If you rent an excavator without specifying a bucket, you will probably receive a general-purpose bucket. It comes with short, blunt teeth that work great on soil and are available in many sizes for various applications. Here are some of the materials you can move with an all-purpose excavator bucket: Dirt Sand Topsoil Clay Gravel Loam Silt Ground with loose gravel or stones Frost-covered soil Packing 1. We pack the products by simple pallet or case which is seaworthy. 2. Fast delivery time: 5-7 days for small quantity, and 20-30 days for container quantity. 3. We have a team specialized in packing and loading container, they have rich experience, and can load the max quantity products, which can help customer save the ocean freight. Company Shandong Mingde Machinery co., Ltd produce many kinds of excavator attachments such as: buckets, ripper, boom & arm, grapple, quick coupler, hydraulic shear, hydraulic clamp, hydraulic vibration hammer, hydraulic crusher, milling machine, screener, strength boom & arm, tamping bucket, bulldozer shovel, bulldozer push beam, bulldozer ripper, loader bucket, loader timer grapple, show shovel etc. We have many kinds of top quality attachments products to fit all type of excavators, bulldozers and loaders. Also, we have our own import/export company, our products are exported to all over the world, based on our quality and the best after-service. In the year 2011, Shandong Mingde Machinery Co,Ltd has set up joint venture with a HongKong Investment Co. Ltd namely Shandong Mingde Gangcheng Machinery Co.,Ltd with WMS brand. Now our company has two brand names and so we will try our best to develop the international market in future.
The MSB bucket comes equipped with an interchangeable mesh system around the drum inner circumference and replaceable sections in the conical rear area of the drum. Four models are offered to fit mini diggers from 6 tonne to 36 tonne excavator. Suitable for top-soil, quarried stone, remediation of contaminated soils beaches, demolition waste and green recycling duties. The MSB series is just at home clearing on a demolition site or in the quarry cleaning and sizing stone. Features Preliminary screening of waste materials, demolition, excavation and re-filling, and soil rebuilding of rocky land. The screening bucket is suitable for sorting natural materials before and after comminution, reducing the comminution time by 60%, so that materials that are compatible with the type of processing required can be recycled and managed. With the inching hydraulic system, even wet materials can be screened, increasing production by 30% year-on-year. It is suitable for gravel screening and beach cleaning in waterways. It is a good assistant for screening fine debris blocks. The size of the sorting screen can be adjusted by changing the screen. Screen sizes from 10mm to 150mm are available. Can be made according to customer needs. 1. The mesh hole is not easy to block. 2. The operation is stable and the noise is low. 3. Simple structure and convenient maintenance. 4. The screening cylinder can be rotated forward and backward for easy screening. 5. The reliability of the whole machine is high, and the one-time investment is less. 6, the use of special mesh, high screening efficiency, long service life. Packing 1. We pack the products by simple pallet or case which is seaworthy. 2. Fast delivery time: 5-7 days for small quantity, and 20-30 days for container quantity. 3. We have a team specialized in packing and loading container, they have rich experience, and can load the max quantity products, which can help customer save the ocean freight. Company Shandong Mingde Machinery co., Ltd produce many kinds of excavator attachments such as: buckets, ripper, boom & arm, grapple, quick coupler, hydraulic shear, hydraulic clamp, hydraulic vibration hammer, hydraulic crusher, milling machine, screener, strength boom & arm, tamping bucket, bulldozer shovel, bulldozer push beam, bulldozer ripper, loader bucket, loader timer grapple, show shovel etc. We have many kinds of top quality attachments products to fit all type of excavators, bulldozers and loaders. Also, we have our own import/export company, our products are exported to all over the world, based on our quality and the best after-service. In the year 2011, Shandong Mingde Machinery Co,Ltd has set up joint venture with a HongKong Investment Co. Ltd namely Shandong Mingde Gangcheng Machinery Co.,Ltd with WMS brand. Now our company has two brand names and so we will try our best to develop the international market in future.
Features Clamshell bucket is the bucket that can open and close to grasp the sediment and all kinds of bulk cargo.It is a kind of spreader that mainly rely on the left and right two combined bucket or multiple jaw opening crawl and unloading materials.The grab overall structure is light and durable,offering high grabbing ratio,strong closing force and high material filling rate. Packing 1. We pack the products by simple pallet or case which is seaworthy. 2. Fast delivery time: 5-7 days for small quantity, and 20-30 days for container quantity. 3. We have a team specialized in packing and loading container, they have rich experience, and can load the max quantity products, which can help customer save the ocean freight. Company Shandong Mingde Machinery co., Ltd produce many kinds of excavator attachments such as: buckets, ripper, boom & arm, grapple, quick coupler, hydraulic shear, hydraulic clamp, hydraulic vibration hammer, hydraulic crusher, milling machine, screener, strength boom & arm, tamping bucket, bulldozer shovel, bulldozer push beam, bulldozer ripper, loader bucket, loader timer grapple, show shovel etc. We have many kinds of top quality attachments products to fit all type of excavators, bulldozers and loaders. Also, we have our own import/export company, our products are exported to all over the world, based on our quality and the best after-service. In the year 2011, Shandong Mingde Machinery Co,Ltd has set up joint venture with a HongKong Investment Co. Ltd namely Shandong Mingde Gangcheng Machinery Co.,Ltd with WMS brand. Now our company has two brand names and so we will try our best to develop the international market in future.
