Modified silicone MS resin-based (STPU) is a suitable adhesion for inorganic material (Metal, glass, ceramic) and organic material (a type of plastic) using moisture reaction to cure at a room temperature (RTV). The dry surface time is about 3-10 minutes. It has excellent adhesion for the plastic material and can complement the weakness of the general silicone bonding with plastic. It is one of the cost-effective and high-performance materials.
We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
Silway 630 is a silicone oil modified by alkyl aralkyl.
Silway 630 could used as a release agent for plastic or rubber components; or used as an external lubricant for rubber parts in mechanical applications; or use as wetting and dispersing agent for pigments and fillers; and also could used as high temperature coating leveling agent
When Silway-630 used as release agent, the produced components should be cleaned,and then painted or glued. Usually, only the surface needs to be cleaned with conventional solvents. Incidental contact between paint components generally does not cause "fish-eye cracks".
However, as with many lubricating oil or grease, if parts coated with a large amount of Silway-630 and not cleaned properly, slight "fish-eye cracks","orange peel like wrinkles" or poor adhesion may occur during painting; before being used in mass production operations, compatibility assessments should be made for the coating or bonding systems used in subsequent processing operations.
Silway-630 is also suitable for wetting and dispersing pigments and fillers in coating leather.
Ferro silicon Specs: Si:75%min. and Si:72%min. C:0.2%max. S:0.02%max. P:0.04%max. Al:2.0%max.1.5%max.and 1.0%max .Commodity: Ferro Silicon Low Al Specs: Si:75%min. C:0.2%max. S:0.02%max. P:0.04%max.Al:0.1%max.0.3%max.and0.5%max. In 1mt plastic woven bags.
Ferro Silicon Ferro Silicon has a melting point of 1200�¯�¿�½?�?�°C to 1250�¯�¿�½?�?�°C with a boiling point of 2355�¯�¿�½?�?�°C and Ferro Silicon contains about 2% of calcium and alluminium. Ferro Silicon, as an additive to the production process of ferrous metals, will impart several desirable properties upon the resultant alloy. Some of the primary benefits of adding Ferro Silicon to an alloy is to improve the corrosion resistant properties of the new compound, as well as to add to the high temperature heat- resistance properties of the new alloy, for example, in the production of silicon steel for use in transformer cores.
FerroChrome is a kind of Ferro alloy which is formed by Ferro and Chrome,it is an important alloy addition in steel making. Ferrochrome (Fe Cr) is an alloy of chromium and containing between 50% and 70% chromium.
22034 Modified Silicon Suppliers
Short on time? Let Modified Silicon sellers contact you.
Subject: Offer of High-Quality Ferro silicon (Fe Si 72-75%)
Origin: Turkey
MACH TECH Fze is established in Ham riyah Free Zone, Phase I, Sharjah, one of the busiest ports for supply and distribution of various products, globally. We are equipped with one of the largest capacities at a single location and have the ability to supply in bulk. We are one of the biggest trading companies in the private segment. It has more than 1,000 employees , this company is dealing with a number of different industries such as Petrochemical, Oil and Gas, Minerals, pharmaceuticals and food industries in national and international market.it would be great if you visit our website:www.machtechco.com
We are pleased to offer you Ferro silicon 72-75% (Fe Si) with consistent quality and competitive pricing. The product is originated from Turkey, a reliable source well-recognized in the metallurgical supply chain. Product Specification (Typical Analysis):
Silicon (Si): 72% - 75%
Aluminum (Al): <1.5%
Carbon (C): <0.2%
Sulphur (S): <0.02%
Phosphorus (P): <0.03%
Size: 10-60 mm (or as per your requirement)
Packing: 1MT Jumbo Bags or customized
Key Advantages:
Stable quality with guaranteed specifications
On-time delivery from Turkey or Emirate port
Flexible logistics and payment terms
Available stock for prompt shipment
We would be pleased to share a detailed quotation, samples, or further documentation upon your request. We look forward to the opportunity to collaborate with your esteemed company.
We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
SILICON WAFERS are the building blocks of modern technology, they provide the substrate onto which circuits are constructed. We offer Prime, Test, Monitor, SEMI standard, and customized silicon wafers in all diameters from 2�¢?�³ to 300mm. Our Wafers meet the SEMI standards, along with customized options.
Silicon On Insulator (SOI) Wafers: Chips fabricated on SOI wafers achieve 30% faster speeds and 80% lower power demands compared to CMOS devices. The SOI structure consists of three layers: a top active device layer for transistor fabrication, a buried oxide (BOX) insulator layer, and a bottom handle wafer layer.
Silicon Float Zone Wafers: is a crystal growth technique that produces highly pure silicon wafers with fewer impurities than traditional methods.
Silicon Thermal Oxide Wafers: Has high quality silicon thermal oxide wafers in all diameters from 2�¢?�³ to 300mm.
Silicon Nitride Wafers: Has different option of film processing for your silicon needs, including LPCVD nitride.
On Insulator (SOI): Has high quality silicon thermal oxide wafers in all diameters from 2�¢?�³ to 300mm.
Fused Silica Wafers: is the amorphous phase of quartz (SiO2).
Borofloat 33 Glass Wafers: is used in a wide range of applications like micro-optics, sensors, microlithography, semiconductor engineering, lighting, medical technology.
We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
High quality silicone foam tube for medical, consumer and industrial application. It has outstanding heat-resistant air aging performance, strong sealing, ozone resistance, and is moisture-proof.
corrugated silicone tube is widely used in medical industry, it is able to withstand high temperature like autoclave sterilization. silicone is a good material to pass the medical test like bio-compatibility test.
We offer superior quality sponge iron that is also known as direct- reduced iron. Our offered sponge iron is made for high grade, 65-70 fe
Min fem-80%, fet-90-92%, s-0.04% max. Loose in form of lumps.
Sponge iron filter material In industry through a sponge iron production equipment is widely applied iron phosphorus reduction method, method of reduction of iron ore concentrate, etc., the rolling iron phosphorus or ore concentrate after reduced iron press down into pieces, into the roasting tube into the kiln roasting, produce the high quality reduced iron. Sponge iron filter material for the first time into the deaerator, must first after backwashing, remove the sponge iron residue on the surface of the filter material float ash impurities.
We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
liquid methyl silicone resins for coatings
This product has excellent heat resistance, electrical insulation, and moisture resistance.
It is suitable for H - grade motor, transformer coil, transistor sealing, H - grade glass wire dipping and high-temperature resistant coating, etc.
Item Index
Appearance Light yellow or red-brown liquid,
opalescence is permitted, no
mechanical impurity
Solid content((150,2h,%) 50±1
Viscosity (4# cup,25, S) no less than 15
Drying Time(200, Copper Sheet, h) No more than2
Mass Loss(400,3h,%) No more than 5
Appearance
White or Light Yellow Emulsion
pH
6.5-8.5
Emulsion Lonic
Weak Anionic
Appropriate Thinner
10-30 â?? Water Thickening
Standard
GB/T 26527-2011
Organic Silicon Defoamer
1. The defoamer is composed of polysiloxane, modified polysiloxane, silicone resin, white carbon black, dispersing agent and stabilizer, etc.
2. At low concentrations, it can maintain good elimination bubble suppression effect.
3. Foam suppression performance is prominent
4. Easily dispersed in water
5. The compatibility of low and foaming medium
6. To prevent the growth of microorganisms
Advantage
It is composed of dispersant and stabilizer, low dosage, good acid and alkali resistance, stable chemical properties, easy to disperse in water, effectively prevent bacterial growth. The properties are stable during storage.
Application
1. Papermaking chemical pulping high temperature vacuum or pressure in the defoaming in pulp washing machine
2. When the alkali refining agent of textile industry, inhibit elimination of treatment before
3. Circuit board cleaning
4. Oil mud defoaming in the process of mining
5. Textile printing and dyeing processing
6. Agricultural chemicals
Chemical name:Polymethylhydrosiloxane CAS no:63148-57-2
Product performance
Favorable film-forming property;
It reacts with HO or R-OH and gives off H2 under the condition of existence of alkali or lewis acid;
It reacts with alkenyl compounds easily under the condition of existence of Pt-Cr compounds;
When Tï¹¥50, it reacts with compounds with epoxy group;
Main uses
1. Antifouling, oil-proofing and water-proofing agent for ceramics
2. Important intermediate for synthesizing modified silicone oils and silicone rubber
3. Water-proofing agent and softening agent for natural and synthesizing fiber fabrics, silks, and leathers
4. Water-proofing agent and anti-sticking agent for paper
5. Softener for glass fiber
6. Water repellent agent and lubricant for cosmetics.
Packing, storage, and transportation:
The product is packed by 100kg or 200kg plastic drum, , or 5kg, 20kg, or 50kg PE plastic drum.
Keep in clean and closed container
Keep in cool and dry place. To protect from direct sunlight. Shelf life is half a year.
To transport as non-dangerous products.
IMPORTANT:
The products sold by CASTCHEM must be in strict accordance with the law of the People's Republic of China,users should make their own independent determination that the product is suitable for the intended use and can be used safely and legally.SELLER MAKES ON WARRANTY;EXPRESS OR IMPLIED(INCLUDING AND WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE)OTHER THAN AS SEPARATELY AGREED BETWEEN THE PARTIES IN WRITING.
22034 Modified Silicon Suppliers
Short on time? Let Modified Silicon sellers contact you.
