Mil-c-5015 series connector Our factory are specialized in manufacturing mil-c-5015 series connector and its accessories such as plugs, jacks, pin, socket, and insulator etc. For export. With only your drawing on hand, we will send you the satisfied sample with the best price. No matter where you are. Any call or email to us will be a good starting of our successful cooperation.
Our factory are specialized in manufacturing electric connector and its accessories such as plug, jack, pin, socket, and insulator etc. For export. With only your drawing on hand, we will send you the satisfied sample with the best price. No matter where you are. Any call or email to us will be a good starting of our successful cooperation.
Electric connector
FH SERIES OF PRODUCTS: FH products are Pure nonionic derived the endosperm of guar polysaccharide (Cyamopsos tetragonolobus). The products are unique with ultra-high viscosity with fastest hydration characteristics as shown in Figure 1 below. Also, when added with other drilling components, to seawater, a KCl solution or other aqueous system, the product suspension disperses readily without lumping, even under low-shear conditions generating most of its full viscosity within just a few minutes. PRODUCT COMPATIBILITY: FH series of products are compatible with most of the chemicals and auxiliaries used in drilling operations. However, the products are not compatible with Arabic and Crystal gums. Also, in presence of borates they form elastic gel. PRODUCT APPLICATIONS: FH series of products are natural, high viscosity, fast hydrating non-Newtonian hydrocolloids with suitable cross linking components in diesel slurries and are versatile for continuous mix applications, where extremely fast hydration and subsequent viscosity development is required. They are excellent viscosifiers, stabilizers, thickeners and suspending agent for use in oil-drilling, workover fluids and several other oilfield applications like hydraulic fracturing, oil well stimulation, mud drilling, oil well capping, flocculent and liquid shoring etc. The product is used as a surfactant; synthetic polymer and deformer ideally suited for all rheological requirements of water based and brine based drilling fluids. Specifications:- PRODUCT : FH-35 FH-38 FH-42 CAS No. : 9000-30-0 9000-30-0 9000-30-0 Granulation : FINE FINE FINE APPEARANCE : OFF WHITE POWDER MOISTURE : 8% Max. 8% Max. 8% Max. PROTEIN (N X 6.25) : 5.0% Max 5.0% Max 5.0% Max ASH : 1.5% Max. 1.5% Max. 1.5% Max. ACID INSOLUBLE RESIDUE (A.I.R.) : 3% Max. 3% Max. 3% Max. CARBOHYDRATE (incl gum by difference) : 82% Min 82% Min 82% Min pH (1% Solution) : 5.5 ? 6.5 5.5 ? 6.5 5.5 ? 6.5 VISCOSITY : (0.48% Product in 2% KCL Sol. 2.5 mins mix @1500 RPM in waring blender) Fann 35sa Viscometer at 300 RPM, 25�C 3 Mins : 35 3 Min:38 3 Mins : 42 5 Mins : 37 5 Mins : 39 5 Mins : 43 30 Mins : 39 30 Mins : 42 30 Mins : 45 60 Mins : 40 60 Mins : 43 60 Mins : 47
Ramming mass is commonly used in metallurgy, building materials, non-ferrous metal smelting, chemical, machinery and other manufacturing industries. Ramming mass is widely used in non-core intermediate frequency furnace and core induction furnace. As an intermediate frequency furnace ramming material, refractory ramming is applied to melt gray cast iron, nodular cast iron, malleable cast iron, vermicular cast iron, and cast alloy steel; to melt carbon steel, alloy steel, high manganese steel, tool steel, heat resistant steel, stainless steel, molten aluminum and its alloys; to melt red copper, brass, white brass, bronze and its alloys, etc. Induction furnaces are used for melting cast iron, mild steel and various alloy steels in foundries and making of steel in mini steel plants using sponge iron The refined high silicon, low iron quartz sand and quartz powder are selected and the fused quartz sand is added as the refractory material., with no slag, no crack, damp proof, convenience of repair, and the corrosion resistance, thus greatly improving the furnace service life span and the economic benefit.. Silica ramming mass can safely be used up to an operating temperature of 1600 deg C. Since it expands very little, it is superior to both alumina and magnesia refractories to resist thermal shocks Acid ramming material is the premixed ramming mass of the lining material. The acid ramming mass is used to smelt a series of metal materials such as ordinary steel and carbon steel. The lining practice best suited to a particular furnace depends upon the capacity and design of the furnace, operation practice adopted during making of a heat, and furnace output.
Anabolic Halo Performance Series is a substitute for Protein Shake, Post Workout Shake, Creatine, Amino Acids, and Carbohydrate Drink. The Anabolic Halo Performance Series contains a multicomponent protein with varying absorption rates to provide your muscles with the building blocks for long. It also contains creatine, it will give strength and endurance, and the branched chain amino acids (BCAAs) will protect muscle tissue from destruction after training. The Anabolic Halo Performance Series has added L-Glutamine and Phytonutrients from Cherry Concentrate. L-Glutamine - the most essential amino acid in our body, provides immune support, speeds up metabolic processes in muscles and slows down catabolic processes after hard training. Cherry Concentrate Phytonutrients help improve post-workout recovery through muscle relaxation, while a specially formulated carbohydrate formula will replenish wasted energy and restore glycogen stores in the body. Nutrient content: serving, 34 g Calories 130 kcal incl. Calories from Fat 10 kcal Fat 1 g incl. Saturated Fat 0.5 g Cholesterol 15 mg Carbohydrates 10 g incl. Fiber 1 g incl. Sugars 1 g Protein 20 g Vitamin C 30 mg (50%) Calcium 175 mg (18%) Magnesium 47.5 mg (12%) Sodium 140 mg Potassium 27.5 mg
Anabolic Halo Performance Series is a substitute for Protein Shake, Post Workout Shake, Creatine, Amino Acids, and Carbohydrate Drink. The Anabolic Halo Performance Series contains a multicomponent protein with varying absorption rates to provide your muscles with the building blocks for long. It also contains creatine, it will give strength and endurance, and the branched chain amino acids (BCAAs) will protect muscle tissue from destruction after training. The Anabolic Halo Performance Series has added L-Glutamine and Phytonutrients from Cherry Concentrate. L-Glutamine - the most essential amino acid in our body, provides immune support, speeds up metabolic processes in muscles and slows down catabolic processes after hard training. Cherry Concentrate Phytonutrients help improve post-workout recovery through muscle relaxation, while a specially formulated carbohydrate formula will replenish wasted energy and restore glycogen stores in the body. Nutrient content: serving, 34 g Calories 130 kcal incl. Calories from Fat 10 kcal Fat 1 g incl. Saturated Fat 0.5 g Cholesterol 15 mg Carbohydrates 10 g incl. Fiber 1 g incl. Sugars 1 g Protein 20 g Vitamin C 30 mg (50%) Calcium 175 mg (18%) Magnesium 47.5 mg (12%) Sodium 140 mg Potassium 27.5 mg
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75200 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc ( +10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80 C. When the DC panel has a temperature over 100 C, the module will stop working; when the DC panel has a temperature below 90 C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
We KAPADIYA EXPO COMPANY like to offer our clients an extensive array of Fresh Mango, Mango slices, Mango pulp & Mango juice, that is highly appreciated in the market for its quality and taste. Our clients can avail from us an excellent quality of Mangoes. Keeping in mind the varied needs of our clients, we offer an entire range of different packaging options at affordable prices. Our quality examiners execute a series of tests on different parameters, to ensure the quality of the entire array. It has a rich flavor, is hygienically processed & Long shelf life. mangoes are used for the production of jams, marmalades, jelly, sweets, drinks, and fillings of baked goods. It is used in various dishes as a flavoring agent. The mango is tasty, healthy, and flavorsome. Mangoes are rich in boasting high levels of vitamins a, c, and e, soluble fiber, pectin, and unique flavonoids such as mangiferin. mangoes are among the most widely consumed fruits in the world. We provide the Indian best types of mangoes like ALPHONSO'S, KESAR, TOTAPURI, BADAMI, and many more Health Benefits of Mangoes: Mangoes contain many VITAMINS, it is gives ENERGY, SUGAR, PROTEIN & WATER to our body. Mango is high in nutrients â?? particularly VITAMIN C, which aids immunity, and iron absorption. This fruit is not only delicious but also boasts an impressive nutritional profile. Mango is a good source of folate, several vitamins B, as well as VITAMINS A, C, K & E, all of which help boost immunity. Mango contains magnesium, potassium, and the antioxidant MANGIFERIN, which all support healthy heart function
Type:Steel Coil, Hot-Galvanized Steel Sheet, Color Coated Steel Sheet, C Surface Treatment:BA/2B/NO.1/NO.3/NO.4/8K/HL/2D/1D Package:Standard Sea Worthy Package or as customer's requirement Keyword:cold rolled coil Payment:D/P,L/C,TT,D/P,D/A Usage:Architectural decoration, luxury doors, elevators decorating,ect Grade:200 400 series MOQ:25 Tons Special Use:Silicon Steel Surface structure:zero spangle / minimized spangle / regular spangle/ big spang Type:Steel Coil Standard:AiSi Width:1251-1500mm Certificate:API Certificate:ce Certificate:SNI Certificate:SASO Certificate:SABS Surface Treatment:Normal Oiled Hardness:Full Hard Tolerance:�?�±1% Processing Service:Welding Processing Service:Punching Processing Service:Cutting Processing Service:Bending Processing Service:Decoiling Processing Service:Annealed Processing Service:Black Annealed Skin Pass:Yes Oiled or Non-oiled:Slightly Oiled Alloy Or Not:Non-Alloy Delivery Time:within 7 days Place of Origin:CN;JIA Application:High-strength Steel Plate Thickness:0.5mm~3.0mm Length:1000-12000(requirment) Grade:steel
Based on the high reliable twist pin contact technology, sunkye offer rectangular nano-d connectors and assemblies, they are the ideal solutions for application of aeronautics, space, military, medical and other filed which require extreme miniaturization, reliability, space and weight saving.It with small contact spacing:0.635mm(0.025")and nanominiature outer shell.And meet the specification of mil-dtl-32139 .Specification: ¦ contacts: 9, 15, 21, 25, 31, 37, 51, 69 pins, etc. ¦ contact spacing: 0.635 mm(0.025") ¦ temperature: 55?~+125? ¦ rated current: 1a ¦ contact resistance: =21mo ¦ dielectric strength: 250v
Wholesale Bee Pollen Powder Food Grade Natural Bee Raw Pollen Powder Place of Origin: Xuchang Brand Name: Super-aweet Certification: ISO, GMP, HACCP, Kosher, FDA Model Number: 2001 Minimum Order Quantity: 1000kgs Packaging Details: 1kgs/foil bag, 20bags/carton Delivery Time: 10 working days Payment Terms: T/T, L/C, D/A, D/P, Western Union, MoneyGram Supply Ability: 1500tons Name: B Pollen Powder Weight: 20kgs/carton Moisture: Max.7% Protein Content: 20% Ash: Max5% Color: Miex Yellow EXPIRY DATE: 24month Series: Tea/rape/mixed Pollen High Light: Anti Atherosclerosis Raw Pollen, Sunflower Raw Pollen Powder