10/100/1000M Media converter 1550nm SM SC 40KM with external power supply Features: Supporting : Full duplex and half duplex transmission and capable of automatic negotiation. efficient built-in switching core ,to implement flow control and reduce broadcast packets. Supporting : The transmission of extra-long packets over VLAN. Supporting : The selection of multiple types of fiber ports such as dual-fiber multi-mode. dual-fiber single mode and single fiber single mode, to satisfy the extended requirements of users. Parameter: Parameters Specifications Access mode 10/100/1000Mbps Gigabit Ethernet Standard IEEE802.3 10Base-T Ethernet,IEEE802.3u 100Base-TX/FX Fast Ethernet, IEEE802.3ab 1000Base-T , IEEE802.3z 1000Base-SX/LX Gigabit thernet,IEEE802.1qVLAN,IEEE802.1p QoS,IEEE802.1d Spanning Tree Wavelength 850nm/1310nm/1550nm Transmission distance Dual-fiber multi-mode: 220m (fiber size: 62.5/125¦m)/550m(fiber size: 50/125¦m) Dual-fiber single-mode: 10/20/40/60/80/100/120Km Single-fiber single-mode: 10/20/40/60/80Km Category-5 twisted pairs: 100m Port One RJ45 port: Connected to STP/UTP category-5 twisted pairs One fiber port: dual-fiber multi-mode SC (fiber size: 50,62.5/125¦m) Dual-fiber single-mode SC/FC fiber port (fiber size: 9/125¦m) Single-fiber single-mode SC/FC fiber port (fiber size: 9/125¦m) Conversion mode Medium conversion Delay
1.Product Description Gigabit Fiber Media Converter with 10/100/1000M single mode Single Fiber Converter is the conversion equipment of Ethernet optical-electronic signals between 10/100/1000M UTP interface (TX) and 1000M Fiber interface (FX). The traditional 10/100/1000M Ethernet can be extended to the distance of 100km through Single Optical Fiber link. The performance and quality of the products are excellent because of adopting latest IC from Taiwan. It must be used in couples, because the transmitted optical differs from the receive optical in wavelength. 6 Group LED indicated lights could fully monitor the working conditions of Converters. It is easy for end-users to observe the conditions of network. The Series product with reasonable price is especially designed for network end-users. There are also many other advantages such as isolation protection, good data security, working stability and easy maintenance. 2.Technical Parameters Technical Parameters for 10/100/1000M Adaptive Fast Ethernet Optical Media Converter Number of Network Ports1 channel Number of Optical Ports1 channelFTTH 10/100/1000M WDM Gigabit Ethernet Fiber Optic Media Converter Transmission Rateself-adaptive 10/100/1000M Protocol supportedIEEE802.3/IEEE802.3U etc. Fiber TypeSingle Fiber Optic modeSingle Mode Transmission modehalf / full duplex Overall Power
SFP Slot 10/100/1000M Optic Media Converter pls contact us for more details info[at]hongkien[dot]com 10/100/1000Base-TX to 1000Base-FX Converter Standards: IEEE802.3 IEEE802.3U, 10/100/1000Base-TX, 1000Base-FX Interface: 1x RJ-45 connector 1x SFP Slot Flow Control: TEEE802.3x Flow control for full duplex mode. Back-pressure flow control for half duplex model call
Short Description: 10/100/1000M adaptive fast Ethernet optical Media Converter is a new product used for optical transmission via high-speed Ethernet. It is capable of switching between twisted pair and optical and relaying across 10/100/1000Base-TX to 1000Base-FX network segments, meeting long-distance, high-speed and high-broadband fast Ethernet workgroup usersâ?? needs, achieving high-speed remote interconnection for up to 100 kmâ??s relay-free computer data network.We can offer dual fiber multi-mode as well single fiber single-mode. Application : With steady and reliable performance, design in accordance with Ethernet standard and lightning protection, it is particularly applicable to a wide range of fields requiring a variety of broadband data network and high-reliability data transmission or dedicated IP data transfer network, such as telecommunication, cable television, railway, military, finance and securities, customs, civil aviation, shipping, power, water conservancy and oilfield etc, and is an ideal type of facility to build broadband campus network, cable TV and intelligent broadband FTTB/FTTH networks.
Support 10/100m remote manageable fx media converters, 10/100/1000m remote manageable fx media converters, 1 fx + 2 RJ45 ethernet media converter, 125m~4.25g oeo, and 10g oeo managed at the same time Cover all functions of common fiber media converters, what's more, it supports protocols like snmp, web, telnet and console They can realize the integrated management to all chassis. Media converter card supports protocols like q-in-q double tag vlan, ieee802.1q tag vlan and ieee802.3x flow control Interface for management: rs232 console port (RJ45) and 10/100mbps RJ-45 ethernet port. Supporting remote and local management. With centralized management and top tree, several chassis can be managed in the same interface at the same time; with grouping management any converter can be conveniently manipulated among many converters. Standard package
Non-Sterile Medical Examination Nitrile Gloves Powder free & Latex free 100% Virgin raw materials with FDA certificate & as per ASTM D6319/ CE EN 455 Quality standard: ASTM D6319, with 510K and FDA, CE/EN455, Color: Blue, white Finger Tips: textured Cuff: Beaded Pcs per Box for S/M/L/XL : 100pcs/box Origin: China, Vietnam, Thailand, Malaysia Benefits Protection from unwanted and harmful substances Beaded Cuff ensures easy donning and prevent roll down Superior Strength with better Puncture resistance Finger Tip Textured enhances wet and dry grip Thinner Guage improves tactile senstivity Custom Design enhances comfort and fit Provide an Alternate Solution for individual who are allergic to natural rubber latex Material : Synthetic Nitrile Type : Non-Sterile Powder Free, Amibidextrous, Finger Tip Textured, beaded cuff. Storage: Store in a dry and cool place, the temperature not higher than 38�° C Shelf life: 2 years Physical Properties Tensile Strength: Before Aging 14Mpa min Tensile Strength: After Aging 14Mpa min Elongation at Break (%): Before aging 500% min Elongation at Break (%): After aging 400% min Length: 230 mm in XS, S, M, L, XL Width: 70+/- 10 (XS) Width: 80+/- 10 (S) Width: 95+/- 10 (M) Width: 110+/- 10 (L) Width: 120+/- 10 (XL) Thickness Single wall ( mm): Fingers 0.050mm min Thickness Single wall ( mm): Palm 0.050mm min
We supply high grade face veneer or core veneer. Wood species available: eucalyptus, acacia, poplar, keruing, okume, birch, pine etc. Our core veneer can be used for commercial grade plywood, film faced plywood, packing plywood. 1.Rotary cut : 1,270 x 640 x 1.0MM, OR 1.7mm 2.Sliced cut: 1270x Width 60mm upward , 0.45mm upwards 3.Thickness Tolerance: -0.03, + 0.05 4.Content Moisture: 18 % max 5.Drying process; Sundry or oven dry. 6.Cutting Process: Rotary Cutting/ Sliced cutting Grade A: 1. Full sheet of same color, no dead knot and small hole. No tear, No Joints 2. Whole piece (no joints) with live knots, limited dead knots, some small holes not more than 2cm in diameter. Also available in mix of grade A and B We can supply in following grade 1Grade A: 100% 2Grade A :90%+ Grade B:10% 3Grade B: 100%
Name : Weed control mat/Ground cover/ 1. Weight 2oz/sm - 14oz/sm or 60gsm-150gsm 2. Width 1.6' -20' or 0.5m-6m 3. Roll Length 16', 33', 65', or 5m,10m,20m,25m,50m,100m or as required 4. Color Black,Green,Black-green or as required 5. Weave 8*8,10*10,11*11,12*12,12*16 6. Material 100% PP material 7. UV resistance 3-5 years 8. Sample Avaliable 9. Delivery time About 20 days 10. Min order No limit 11.Terms of payment 1.TT or LC 12. Supply capacity 500 tons per month 13. Packing In rolls with paper core inside and polybag outside or in Carton or as your request 14. Quantity 1x20ft container can load about 11 tons 1x40'HC can load about 26 tons 15.Export market Australia,Canada,Argentina,USA,The Middle East,Europe market ,Japan and so on.
10/100 MBPS managed media converter Managed Media Converter is a 10/100Base-TX auto negotiation and auto MDI/MDIX cable selection Fast Ethernet Media Converter with intelligent network management that translates transmission signals from a twisted-pair 10Base-T or 100Base-TX cable to 100Base-FX fiber optic cable. It enables network managers and network operators quickly isolate problems without visiting multiple wiring closets, avoiding expensive downtime. With its SNMP manager, user can monitor and configure the Copper Port and Optical Port of center chassis and remote standalone easily. Besides, user can control the bandwidth rate limiting as N*32Kbps. Hardware Function Support 10Base-T, 100Base-TX, 100Base-FX Fully compatible with IEEE802.3, IEEE802.3u, IEEE802.3x standards Up to 5km distance on multi mode optical port and 120km distance on single mode optical port High-performance auto-negotiation chips make sure the data transfer with higher Security, stability and without block. Up to 1916 bytes package forwarded Support half/full duplex mode Auto-negotiate Low power consumption, low heat generation and excellent compatibility 10Watt professional communication power supply module inside the standalone. Chassis supports double redundant power supply modules and each power supply module Supports up to 100 Watt power output for the security and stability Support hot-swap for all the modules, but not including management module Single-strand/dual-strand optical module selectable, FC/SC/ST optical port slectable and standalone/16-slot chassis selectable. Device Size Standalone: 132mm (width)*36mm (depth)*122mm (height) 19-inch Chassis: 440mm (width)*125mm(depth)*250mm(height)
The Tire derived Steel or Tire Wire Scrap is a light melting scrap obtained during the shredding and granulation process of used tires. Generally 10% - 20% of the weight of an old passenger car tyre usually consists of steel. An average shredding plant produces about 100-200 MT of steel tyre wire and its quality can vary according to technology, storing and management systems adopted by the producing plants. We can provide tire wire scrap that still contains up to 20% rubber/fiber. This percentage is detected by manual separation test. The material can be loaded loose in 40 HC container. For further details, please feel free to contact us.
Supports SNMP management (only for management device) MDI-MDIX Auto-crossover supported Plug-and-Play installation Support Jumbo frame (64-9216 Byte) Support Voltage Monitor Support full/half duplex auto-negotiation Provides one RJ-45 twisted pair 1000Mbps Ethernet port and one 1000BASE-Fx port Comply with IEEE802.3z 1000Base-SX/LX &IEEE 802.3ab 1000Base-T LED indication: 1000M,FX, POW, TXD, FRX, FDX/HDX Description: 10-100-1000M designed to fit the emerging deployment needs of optical fiber network. This stand-alone converter allows you to connect Gigabit twisted-pair network to optical-fiber network easily and cost effectively to a maximum distance 120KM. 10-100-1000M is fully compliant with IEEE 802.3z & 802.3ab standards. The Installation & operation procedures of the -10-100-1000M are simple & straightforward. User can monitor the real time operation status easily via a set of LEDs located in the front panel. Export standard packaging
4N toothbrushes in a blister pack 144 such packs in a case 10 such cases on a pallet (pallet size 120 x 100 x 140) by air OR 16 such cases on a pallet (pallet size 120 x 100 x 215) by sea OR 375 such cases direct on floor, without pallet in a 20' dry container OR 825 such cases direct on floor, without pallet in a 40â?? dry container OR 900 such cases direct on floor, without pallet in a 40â?? HC dry container.
4N toothbrushes in a blister pack 144 such packs in a case 10 such cases on a pallet (pallet size 120 x 100 x 140) by air OR 16 such cases on a pallet (pallet size 120 x 100 x 215) by sea OR 375 such cases direct on floor, without pallet in a 20' dry container OR 825 such cases direct on floor, without pallet in a 40â?? dry container OR 900 such cases direct on floor, without pallet in a 40â?? HC dry container.
Each toothbrush in a blister pack 10+2Free blister packs in a hang on card / strip / calendar 48 such hang on cards / strips / calendar in a case i.e. 576 pcs. in a case 16 such cases on a pallet (pallet size 120 x 100 x 127) by air OR 24 such cases on a pallet (pallet size 120 x 100 x 183) by sea OR 425 such cases direct on floor, without pallet in a 20' dry container OR 900 such cases direct on floor, without pallet in a 40â?? dry container OR 900 such cases direct on floor, without pallet in a 40â?? HC dry container.
Each toothbrush in a blister pack 10+2Free blister packs in a hang on card / strip / calendar 48 such hang on cards / strips / calendar in a case i.e. 576 pcs. in a case 20 such cases on a pallet (pallet size 120 x 100 x 115) by air OR 40 such cases on a pallet (pallet size 120 x 100 x 215) by sea OR 475 such cases direct on floor, without pallet in a 20' dry container OR 1,000 such cases direct on floor, without pallet in a 40â?? dry container OR 1,250 such cases direct on floor, without pallet in a 40â?? HC dry container.
Technical Specifications Operating standards: IEEE802.3z/AB, 10/100/1000Base-T and 1000Base-SX/LX/HX MAC address table: 4K Data Buffer: 256K Connector: UTP: RJ-45,10/100/1000Mbps; Fiber: LC,1000Mbps Cable : UTP cable: Cat 5e or Cat 6 (the max distance up to 100m) Fiber : multimode : 50/125, 62.5/125¦Ìm (the max distance up to 550/224m) singlemode : 8.3/125, 8.7/125, 9/125¦Ìm (the max distance up to 100km) Flow control Full Duplex: IEEE802.3x Half Duplex: back pressure. Power: AC 220V(170-260V) 50Hz; DC 5V£¬1A Ambient temperature: 0 ¡« +50 Storage temperature: -20 ¡« +70 Humidity: 5% ¡« 90% Dimensions: Internal Power: 40 (high) x 110 (width) x 140 (length) mm External Power: 26 (high) x 70 (width) x 93 (length) mm.
10/100/1000m fiber media converters Main features Auto negotiation function allows utp ports to auto select 10/100/1000m and full duplex or half duplex. The utp port supports the connection of mdi/mdi-x auto crossover. Multimode fiber: the max distance up to 224m/ 550m Singlemode fiber: the max distance up to 100km Supporting the max 1536 byte ethernet packet Supporting flow control Adopting internal power supply Technical specifications Operating standards: ieee802.3z/ab, 1000base-t and 1000base-sx/lx Mac address table: 4k Data buffer: 256k Connector: utp: rj-45, 10/100/1000mbps; fiber: sc, 1000mbps Cable : Utp cable: cat 5e or cat 6 (the max distance up to 100m) Fiber : multimode : 50/125, 62.5/125ª8m (the max distance up to 550/224m) Singlemode : 8.3/125, 8.7/125, 9/125ª8m (the max distance up to 100km) Flow control Full duplex: ieee802.3x Half duplex: back pressure. Power: ac 220v(170-260v) 50hz; dc 5v¼2a Ambient temperature¦0 ½ +50µ Storage temperature¦-20 ½ +70µ Humidity¦5% ½ 90% Dimensions ¦40 (high) x 110 (width) x 140 (length) mm