MAS Baiyun CTB Wet Drum Separator is newly developed iron ore concentrating equipment under wet condition.It has been designed by engineers having a wealth of knowledge and data, gained over many years of Wet Drum applications and experience. This kind of magnetic separator can prevent the final product from the secondary contamination because of the washing action adopted in the processing. It is equipped with a respective spray pipe for feed and concentrates, and water amount can be adjusted so as to assure suitable density of the concentrate. It can be equipped with cocurrent, counter-rotation and counter current tanks, and equipped double drums or three drums according to requirements of customers.
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.
Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details
These cast iron skulls are a by-product derived from the cast iron foundries. The byproduct is a ferrous by-product which can be utilised in an electric arc furnace to produce crude steel. Physical Description On visual inspection, it appears to be made up of irregular shapes. The material is separated by magnet and screener. Packing: Loose in container Loading: in 20 Container For further information, please feel free to contact us.
Veyed to the side of the conveyor and are discharged to a collection bin by the cleated belts. Suspended magnetic separators can be mounted perpendicular to the material flow or over the head pulley parallel to the material flow. Suspended magnetic separators consist of rubber conveyor belts or stainless steel belts, adjustable take-ups, rugged steel channel frame and a shaft mounted speed reducer with direct drive motor. Features Suspended magnetic separator have a deep penetrating magnetic field. Suspended magnetic separator needs low maintenance and are easy to install and operate. Suspended magnetic separator can function smoothly even in the hazardous environments. Suspended magnetic separator is self cleaning, so no manual cleaning is required and reduces downtime for the end user. Main dimensions and technical data Export packing , or as per customer's request
Guar Gum Split is refined endosperm derived from guar seed or cluster bean (cyamoperm tetragonoloba). Guar Splits are non-ionic polysaccharide galacomannan. Guar Gum Refined Split (Endosperm) is mechanically separated from guar seed which yields 28-30% of Refined Split. Guar beans are harvested and dried following the growing season. The beans are shelled from the pods, the germ and hull removed. The resulting guar splits are wet-milled into powder; the powder is graded by granulation and quality. Products are re-blended according to specification, bagged and marked. Guar Gum Split with its versatile inherent properties is used all over the globe with different utilities in many industries like Petroleum (Oil drilling), textile, printing, food pharma, cosmetic, toiletries paper, tanneries, mining, explosives, pet food etc. in powder form either directly plain Guar Gum Powder or in derived form. Uses : Guar Gum Split with its versatile inherent properties is used all over the globe with different utilities in many industries like Petroleum (Oil drilling), textile, printing, food pharma, cosmetic, toiletries paper, tanneries, mining, explosives, pet food etc. These industries use Guar Gum in powder form either directly plain Guar Gum Powder or in derived form. We provide quality Guar Gum Splits to quality manufacturer of Guar Gum Powder, which is their pre-requirement for manufacturing high quality Guar Gum. Specifications: Color Pale-white Gum Content 80-85% Splits 92-98% Mineral Matter (ASH) 1.5% max Fiber 1.5 – 2.0 % max Protein 5% Maximum Ether Soluble Substances 0.6% Maximum Acid insoluble ash (sand and/or silica) Traces Black Split 1% max Heavy Metals Nil Appearance Bright creamy yellow Packaging: Type of Bags Quantity HDPE Bags 50.00 Kgs Jumbo Bags 1000.00 Kgs
Coconut fibers is an eco - friendly material which are found between the hard, internal shell of the outer coat of a coconut. After fully mature coconuts are harvested, they are put into machines to separate the long bristle fibres underneath the skin of the nut. This process is called wet-milling. The coconut fiber is relatively waterproof, and is one of the few enviromental materials that are resistant to damage by seawater. Specification; Product name: Coconut fiber Place of Origin: Vietnam Color: Natural Brown Material: Raw coconut husk Feature: Environment Friendly
Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor
Our wet drum separator is used to remove very fine magnetizable components from lowconcentration lowviscosity liquids The wet drum separator is intended for use in the metal processing industry and the treatment of preconcentrates extracted from the high gradient magnetic filter In a wet drum separator around 90 of the grain sizes ranging from 1 m to 1000 m can be separated as sludge Salient Features Wet drum magnets have high magnetic recovery and discharge The feed slurry recovers the magnetic impurities Available in single or multidrum models Permanent magnet assembly eliminates coil burnouts The magnetpole elements are bolted to a mild steel shaft The drum is made from thick stainless steel for long life Wet drum separators are available in different configurations like single double and multiple drums In a double drum two separators are arranged backtoback with a common feed Applications Glass Industry Chemical Industry Plastic Industry Mining Industry Food Industry Pharmaceuticals industry Foundry Industry
Mas baiyun ctb wet drum separator is newly developed iron ore concentrating equipment under wet conditions.It has been designed by engineers having a wealth of knowledge and data, gained over many years of wet drum applications and experience. We offer a complete service to mining and mineral industries. Our wide and competitive wet drum separators allow us the freedom to select the correct size and type to meet precisely your process needs in the best techincal and cost effective manner. This kind of magnetic separator can provent the final product from the secondary contamination because of the washing action adopted in the processing. It is equipped with a respective spray pipe for feed and concentrates, and water amount can be adjusted so as to assure suitable density of the concentrate. It can be equipped with cocurrent, counter-rotation and counter current tanks, and equipped double drums or three drums according to requirements of customers. Plastic packing
Wet Permanent Drum Magnetic Separators Are Used In Dense Media Separation (dms) Plants For The Recovery Of Magnetic Particles From The Dilute Medium. They Must Recover The Maximum Amount Of Magnetic Particles At The Highest Possible Density. A Wet Drum Separator Consists Of A Stationary Magnet Arc Around Which A Drum Rotates. The Drum Is Partially Submerged In A Tank Which Follows The Contour Of The Drum. Qj-ct(s/n/b)wet Permanent Drum Magnetic Separator Is A Wet-type Low-intensity Magnetic Separator With Relatively High Magnetic Field And The Most Efficient Magnetic Separation Equipment With Strong Magnetism For Minerals. Qj-ct(s/n/b) Wet Drum Magnetic Separator Is Ideally Used To Separate Ferrous Particles From Non-ferrous Particles. This Kind Of Magnetic Separators Are Made By Us To Provide Ultimate Protection To Crushers, Grinders, Pulverizers And Allied Equipment And Is Useful For Mining And Ore Dressing Industry, And Can Be Equipped With Semi-conflow(ctb), Con-flow(ctn) And Co-flow(cts) Tanks According To Customers' Requirements. Its Magnetic Induction Intensity Can Be Designed In Accordance With Specific Mineral Properties And Operation Processes. Characterized By Advanced Structure, Light Weight, Reliable Operation, Easy Maintain, Serialized Products And Standardized Parts, The Wet Magnetic Drum Separator Can Meet The Needs Of Plants Indifferentsize. Qj-ct(s/n/b) Applications: (1) For Primary Rough Dressing And Refused Tails, Increasing Recovery Rate And Reducing The Load Of Second-stage Grinding. (2) For Concentration Of Ferromagnetic Minerals, Increasing Ore Grade And Recovery Rate. (3) Used Before High-magnetism Separation To Remove Ferromagnetic Minerals From The Ore And Prevent Magnetic Clogging. (4) For Recovery Of Heavy Media At Coal Processing Plant We Can Design As Your Require
CTDG Dry Magnetic Separator is a new type high-efficiency magnetic preseparation equipment for materials with big size, such as lump iron ore,mill sales and other ferrous metals.
MAS Baiyun YC dry drum magnetic separator can attract dry magnetic powder from the non-magnetic materials continuously and automatically. The unique design for magnetic circuit and the magnetic source is made up from the NdFeb with high performance. Featuring with powerful magnetic force and high efficiency for tramp iron-elimination, it can be widely arranged in the lines such as grinding,fire-proofmaterial,foodstuff,feed,buildingmaterial,ceramics,raw material for glass, renewable rubber powder, PVC powder, quartz sand,and chemical industry and so on. Feeding capacity can be adjusted to meet the different granularity requirement. It is characteristic with exempt-maintenance,energy saving, cost-lower,safety and reliability.
MAS Baiyun YCMC wet pulse magnetic separator is a new and high efficiency wet drum magnetic separator with patent. It has advanced structure, particular separating principle, permanent magnet, pulse magnetic field through improving the magnetic system, magnetic intensity, the tank design ect. So this kind of equipment has higher separation rate and more suitable for concentration of strong magnetic material. Increase the grade of concentrates greatly.
Good Price 30% LDAO Lauryl Dimethyl Amine Oxide CAS 1643-20-5 Product details Chemical Name: Lauryl dimethyl amine oxide Code: LDAO 30% Other Name: N,N-dimethyldodecylamine-N-oxid CAS NO.: 1643-20-5 Formula: C14H31NO Purity : 30% LDAO at room temperature is a colorless or yellowish transparent liquid, is a special type of surfactant, it becomes cationic in acidic medium, and in neutral or alkaline medium is non-ionic. In addition to own the general surface active agent properties, but also has excellent solubilization, thickening, emulsification, foaming, stable foam, soft, moisturizing, antistatic, good compatibility with human skin, the slightly physiological toxicity, easy to biodegradation.And it has certain bactericidal properties and mildew - proof effect Product properties 1. Excellent antistatic, softening, foam-stabilizing performance. 2. Mild to skin. Make cloth soft and smooth, make hair soft, easy to comb, glossy and shiny. 3. Bleach stable. Good ability of thickening and solubilizing to keep product stable. 4. Good ability of sterilizing and dispersing calcium soap, good biodegradability. 5. Be compatible with anioncic, cationic, amphoteric and nonionic surfactants. 6. Especially suitable for shampoos, bath washes, dish washing detergents Application Lauryl Dimethyl Amine Oxide used as detergent, emulsifier, wetting agent, foaming agent, softener, milling agent and dyeing auxiliary. Also can be used as sterilizing agent and antistatic agent, as a coagulant during metal plating, as an initiating agent or inhibiting agent in polymerization, as an emulsifying agent or moisturizing agent in cosmetics; otherwise, it can be used as an antirust agent for metal. Packing & Storage Packing: Package: 200kg/drum, 80 drums * 20FCL 1000kg/IBC, 20 IBCs * 20FCL Storage: Kept in dry, cool, and shaded place with original packaging, avoid moisture. Ambient temperature is10-50, the container to be sealed. It is not advisable to use containers of copper material. Recommended storage in plastic containers; a shelf life of two years. Specification Product Lauryl Dimethyl Amine Oxide(LDAO 30%) CAS# 1643-20-5 Batch No 220310-10 Quantity: 28000KG Date of manufacturing Mar. 10th, 2022 Date of expire Mar. 9th, 2023 Iteam Specification Results Appearance Light yellow clean liquid Confirms Active matter % 29 ~ 32 30.1 Free amine (%) 0.70 0.26 Free peroxide (%) 0.50 0.08 Color (APHA) 100 42 PH value ( 10% solu,25 6.0 ~ 8.0 7.5 Conclusion Qualified
We were the first to start a china clay processing plant in Bhuj-Kutch, Gujarat, by acquiring 100 hectares of land on lease from the government in 1983. Back in 2018, a fully automated kaolin plant was established, featuring High Gradient Magnetic Separation (HGMS) and an automatic filter press that can handle up to 8000 tons every month. In 2020, all plants were revamped to include a ball mill, centrifuge decanter, hydro cyclone, and filter press, which helped us achieve a capacity of 25000 tons per month.
Single Drum Type Magnetic Separator Our Permanent Drum type separators are widely used for separating tramp iron from nonmagnetic material to attain the purity of end products It also helps in protecting processing plants and machinery by recovering metal impurities having commercial value as well Single Drum Type Magnetic Separator is widely used in all the processing industries for the separation of iron contamination from minerals chemicals food grains sand plastic fertilizers slag ores etc Double Drum Type Magnetic Separator Double Drum Type Magnetic Separator is mostly used for achieving the highest end product purity The material passes through the magnet twice in a Double Drum type machine Mainly it is used for the separation of iron contamination from Minerals Chemicals Refractory and many other products In Double Drum Type Magnetic Separators high power permanent magnetic plate is provided at the material outlet Modern and Isotropic Permanent Magnets are used having the highest coercivity and everlasting magnetic strength Machines are available with vibrating material inlet hoppers and a totally enclosed design to avoid dusting and pollution Online fitting design is also available as per requirement Triple Drum Magnetic Separator with Control Panel Triple Drum Type Magnetic Separators are also available on demand Salient Features Drum consists of high coercivity modern anisotropic permanent magnets Strong and rugged construction Automatic separation of iron impurities Completely enclosed design to avoid dusting and pollution Special size and capacity Drum Separators can be supplied as per requirement The larger the diameter and width of the drum the greater the volume of material that can be handled Magnetic Materials Magnetic separators are offered with two different types of magnets Ferrite Magnet The magnetic separator with ceramic magnet is useful for the application where free and larger iron particles are to be separated The average magnetic intensity on the magnetic drum surface will be 15002000 Gauss Rare Earth Magnet The magnetic separator with highintensity Rare Earth NdFeB Neodymium Iron Boron magnets is useful for removing magnetic contamination with low magnetic properties and fine iron particles The average magnetic intensity on the drum surface will be 3500 5500 Gauss
Price - Rs 1,400/ Kg Product Specification Usage/Application : Pharma Form : Crystal Packaging Size ; As per client requirement Brand : NT Botanical Name : Mint Leaves Country of Origin : Made in India Product Description Natural Menthol Crystals offered are used in most of the industries including in pharmaceutical, Food and in varied flavoring applications. These menthol crystals are also known by name of chemical name of 1-Methyl-4-Isopropyl Cyclohexane 3 and are colorless crystals with refreshing mint color. With solubility in Alcohol and slightly in water, these have cool sensation in mouth and are made by fractional distillation of menthol oil. Here, the distillation process yields pure menthol as fraction which is slowly cooled and then crystallized. The chilling is done that helps in separation of menthol. Having a characteristic odor of natural menthol as obtained from mentha avensis oil, some of the end usage areas of these natural menthol crystals include in food, toothpastes and cosmetics. Menthol crystal Supplier from india Additional Information Item Code : MT01 Delivery Time : 5-7 Days Production Capacity : 10 ton Packaging Details : 25 kg Drum
Top quality white kidney beans, White kidney beans processing First step: machine selected, decrease admixture Second step: stoning machine, wipe out the stone and stick Third step: magnetic separator, wipe out soil block. Fourth step: specific gravity stoner, wipe out bad beans. Fifth step: after two times processing by specific gravity stoner, beans polished by polished machine Sixth step: beans are transmitted to the colour selected machine by a conveyor Seventh step: classifying Screen, distinguish the size of the bean Eight steps: hand selected. Ninth step: automatic packing Tenth step: storage