Liquid Methyl Silicone Resins For Coatings Suppliers and Manufacturers

DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.

Giva Agro's Pure Shilajit Resin is the closest natural form of Shilajit. Apart from following an ayurvedic purification, no chemical or other outside ingredient is added. That is what makes resin the most potent form of shilajit. Other names of shilajit : Shilajeet, salajit, shilajatu, mimie, or mummiyo, mumijo Properties: Fulvic acid,Humic acid,Selenium Botanical name: Asphaltum punjabianum Product : Pure shilajit resin Form available: Resin/Semi Liquid Country of Origin: Himalayas, Made in India Speciality: No sugar, No Preservatives, No artificial color or harmful Chemical added. Non GMO, Gluten Free, Does NOT Contain Soy, Gelatin, Egg, Dairy or Caffeine, No Additives or Fillers Benefits of Shilajit: 1.Provides energy and revitalisation 2.Regulates hormones and immune system 3.Alleviates pain response 4.Helps with weight loss 5.May help manage Diabetes 6.Promotes healthy metabolism 7.Fights inflammation and builds immunity 8.Potentially aid in breaking of addictions. To have our own private labelled Shilajit,

100g Free Sample Propolis Resin / Health Care Propolis Liquid Extract Basic Information Place of Origin: Xuchang Brand Name: Super-Sweet Certification: ISO, GMP, HACCP, Kosher, FDA Model Number: 3001 Minimum Order Quantity: 500kgs Price: 19 Packaging Details: 1kgs/foil bag, 20bags/BOTTLE Delivery Time: 10 Payment Terms: T/T Supply Ability: 360

Cosmetic Propolis Resin , Bee Propolis Liquid Extract 2 Year Shelf Life 25 kgs/Drums Basic Information Place of Origin: Xuchang Brand Name: Super-Sweet Certification: ISO, GMP, HACCP, Kosher, FDA Model Number: 3001 Minimum Order Quantity: 500kgs Price: 19 Packaging Details: 1kgs/foil bag, 20bags/BOTTLE Delivery Time: 10 Payment Terms: T/T Supply Ability: 360

Professional Propolis Resin / Health Care Propolis Liquid Extract Basic Information Place of Origin: Xuchang Brand Name: Super-Sweet Certification: ISO, GMP, HACCP, Kosher, FDA Model Number: 3001 Minimum Order Quantity: 500kgs Price: 19 Packaging Details: 1kgs/foil bag, 20bags/BOTTLE Delivery Time: 10 Payment Terms: T/T Supply Ability: 360

Capsicum Oleoresin is prepared by extracting the crushed capsicum (Capsicum Annum Linn) with volatile solvents by percolation method. It contains the pungent principles, capsicin not less that 8 percent. It also contains the red colouring matter called Capsanthin. This product is a powerful irritant and a carminative, which is also used as a counter irritant in lumbago and neuralgia. It can also be used to treat stomach ache that involves poorly functioning stomach muscles and as an antibacterial agents. Extraction of oleoresin capsicum from peppers involves finely ground capsicum, from which capsaicin is extracted in an organic solvent such as ethanol. The solvent is then evaporated, and the remaining wax like resin is the oleoresin capsicum. An emulsifier such as propylene glycol is used to suspend the OC in water, and pressurized to make it aerosol in pepper spray. The high performance liquid chromatography (HPLC) method is used to measure the amount of capsaicin within pepper sprays. Scoville Heat Units (SHU) are used to measure the concentration or "heat" of pepper spray. A synthetic analogue of capsaicin, pelargonic acid vanillylamide (desmethyldihydrocapsaicin), is used in another version of pepper spray known as PAVA spray which is used in the United Kingdom. Another synthetic counterpart of pepper spray, pelargonic acid morpholide, was developed and is widely used in Russia. Its effectiveness compared to natural pepper spray is unclear. Pepper spray typically comes in canisters, which are often small enough to be carried or concealed in a pocket or purse. Pepper spray can also be bought concealed in items such as rings. There are also pepper spray projectiles available, which can be fired from a paintball gun. It has been used for years against demonstrators. Derived from chilli peppers, oleoresin capsicum is the active ingredient in pepper spray and in some topical pain relievers.

Ginger root Botanical name: Zingiber officinale Linn. Family: Zingiberaceae. Ginger oil and oleoresins are the volatile oil derived by steam distillation of ginger and oleoresin. It is obtained by percolating the powdered rhizomes of Ginger, Zingiber officinale with volatile solvents. Ginger contains 1-2 percent of volatile oil, 5-8 percent of pungent acrid oleoresin and starch. Zingiberene is the chief constituent in the oil of ginger. Oil is employed for flavoring all kinds of food products and confectionary and finds limited use in perfumery. Oleoresin, commercially called Gingerin contains pungent principles viz. gingerol and shogaol apart from the volatile oil of ginger and is used as an aromatic, carminative, stomachic and as a stimulant. Oleoresin from ginger is obtained conventionally by extraction of dried powdered ginger with organic solvents like ethyl acetate, ethanol or acetone. Commercial dried ginger yields 3.5-10.0 per cent oleoresin. Ginger oleoresin is a dark brown viscous liquid responsible for the flavour and pungency of the spice. Ginger of commerce or `Adrak` is the dried underground stem or rhizome of the plant, which constitutes one of the five most important major spices of India, standing third or fourth, competing with chillies, depending upon fluctuations in world market prices, world market demand and supply position. Ginger, like cinnamon, clove and pepper, is one of the most important and oldest spices. It consists of the prepared and sun dried rhizomes known in trade as `hands` and `races` which are either with the outer brownish cortical layers (coated or unscraped), or with outer peel or coating partially or completely removed. Ginger requires a warm and humid climate. It is cultivated from sea level to an altitude of 1500 meters, either under heavy rainfall conditions of 150 to 300 cm or under irrigation. The crop can thrive well in sandy or clayey loam or lateritic soils. The composition of dry ginger is given below: Dry Ginger rootMoisture:6.9 % Protein:8.6 % Fat:6.4 % Fiber:5.9 % Carbohydrates:66.5 % Ash:5.7 % Calcium:0.1 % Phosphorous:.15 % Iron:0.011 % Sodium:0.03 % Potassium:1.4 % Vitamin A:175 I.U./100 g Vitamin B1:0.05 mg/100 g Vitamin B2:0.13 mg/100 g Niacin:1.9 mg/100 g Vitamin C:12.0 mg/100 g Calorific value:380 calories/100 g. Ginger Oleoresin is obtained by extraction of powdered dried ginger with suitable solvents like alcohol, acetone etc. Unlike volatile oil, it contains both the volatile oil and the non-volatile pungent principles for which ginger is so highly esteemed. Concentration of the acetone extract under vacuum and on complete removal of even traces of the solvent used, yields the so called oleoresin of ginger. Ginger oleoresin is manufactured on a commercial scale in India and abroad and is in great demand by the various food industries.

Liquid Ethyl Acetate: Ethyl Acetate is an ester of Ethanol and Acetic Acid, (systematically Ethyl Ethanoate, commonly abbreviated EtoAc or EA) an organic compound having formula CH3COOCH2CH3. Liquid Ethyl Acetate is a colorless solvent has a characteristic sweet / fruity smell. We are a distinguished Liquid Ethyl Acetate Exporter based in India. Liquid Ethyl Acetate, offered by us, is perfect in formulation is well-tested. Further, we welcome bulk orders for Liquid Ethyl Acetate with complete sense of responsibility. Applications: - Ethyl Acetate is used in a variety of coating formulations such as epoxies, urethanes, cellulosic, acrylics and vinyl’s. - Applications for these coatings are numerous wood furniture and fixtures, agricultural, construction and mining equipment, auto refinishing, and maintenance and marine uses. - Ethyl Acetate has applications as a solvent in inks for flexographic and rotogravure printing. - It is used as an extraction solvent in the production of pharmaceuticals and food, and as a carrier solvent for herbicides. - High purity product can be used as a viscosity reducer for resins used in photoresist formulations in the electronics industry.

DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.

[Alias] foaming powder; sodium lauryl sulfate; sodium lauryl sulfate; sodium dodecyl sulfate, sodium dodecyl sulfate [English name] Sodium dodecyl sulfate. [Abbreviation] SDS [CAS No.] 151-21-3 [Molecular formula] ROSO3Na R = C12alkyl, C12-C14alkyl [Molecular weight] 288.38 (R = C12alkyl), 296 (R = C12-C14alkyl) [Grade] It can be divided into industrial grade (GB/T15963-2008), toothpaste grade (QB/T2900-2012), latex grade and reagent grade according to application fields and standards. [Technical Indicators] [Performance and Applications] This product is a white or yellowish sticky substance, commonly used in detergents and textile industry. Belon to an anionic surfactant.It is easy to dissolve in water, has good compatibility with anions and nonions, and has good emulsification, foaming, penetration, decontamination and dispersion properties. It is widely used in toothpaste, shampoo, shampoo cream, shampoo, washing powder, liquid washing, cosmetics and plastic demoulding, lubrication, pharmaceutical, papermaking, building materials, chemical and other industries. (1) Used as detergent and textile auxiliaries, also used as toothpaste foaming agent, mine fire extinguishing agent, emulsion polymerization emulsifier, wool detergent, etc. (2) Used as anionic surfactant, emulsifier and foaming agent (Use 3) GB 2760-96 stipulates that it is a processing aid for food industry. Blowing agent; emulsifier; anionic surfactant. Used for cake, beverage, egg white, fresh fruit, fruit juice beverage, edible oil, etc. (4) It is used as an emulsifier for drugs, cosmetics and synthetic resins. Foaming agent for toothpaste and fire extinguisher. Used as a detergent for fine silk and wool fabrics. Flotation agent for metal beneficiation. (5) Used as detergent and textile auxiliaries, also used as toothpaste foaming agent, fire extinguishing foam liquid, emulsion polymerization emulsifier, pharmaceutical emulsion dispersant, shampoo and other cosmetics, wool detergent. (Use 6) Biochemical analysis, electrophoresis, ion pair reagent

Bentonite: Buyers can contact us for availing Bentonite, used for the carrier application of liquid Pesticides and Micro-nutrients. Bentonite Blank Granules are coated with biologically derived ingredients, which are resistant to harmful effects of Ultra-violet radiations of sunlight, become active when they get favorable tropical conditions. Bentonite activate the microbial life within the soil and encourages soil microbes to play an active role. Bentonite loosens light soil enhancing thereby its water retention capacity and increase the efficiency of fertilizer. Bentonite turn saline soil into neutral and helps to increase the dark color of the leaves enhancing thereby Photosynthesis process which ultimately increase the yield of the crops. We, being a reputed Bentonite Exporter ensure standard packaging and systematic delivery of Bentonite. Applications: - Bentonite Blank Granules plays very important role in the Pesticides Formulations. - It acts as carrier for various liquid pesticides and the easiest and safest way of pesticides applications. During application, granules are less subject to drift than in the case with dusting and spray. - It can be applied even in condition of wind.

Commodity: Synthetic Cryolite Formula: Na3AlF6 M.W.: 209.95 Properties: The product is a white crystalline powder or a sandy-size granularity, and a pinkish crystalline powder or a sandy-size granularity as well. Sp.gr.2.953.01g/cm3, melting point about 1000centigrade, specific heat 1.056j/gcentigradeat 18100centigrade. Its slightly soluble in water, but insoluble in anhydrous hydrogen fluoride. The content of its crystal water will be decreased while the increasing of the molecular ratio, therefore its loss on ignition will be also decreased while the increasing of the molecular ratio. After the paste of synthetic cryolite with different molecular ratio dehydrates, the loss on ignition at 800centigrade will appear 10.34%, 6.22% and 2.56% when the molecular ratio reaches 1.74, 2.14 and 2.63 reactively. Specifications: Appearance white powder F 52% min Al 12% min Na 33% max SiO2 0.36% max Fe2O3 0.08% max CaO 0.5% max P2O5 0.03% max SO4 0.6% max H2O 0.4% max Loss on ignition 2 % max Uses: Its mainly used as a flux in the aluminum smelting by fused-salt electrolysis; also an opalizer in the manufacture of enamel; an opacifier and auxiliary solvent of glass and enamel; an insecticide of crops; a flux in aluminum alloy casting; and in the production of ferrous alloy and effervescing steel; as well as a wear-resistant filler for resin and rubber-boned abrasive wheels. Packing & Storage: In plastic coating woven bags with plastic film inside, 25kg,40kgs, 50kgs or 1000kgs net each, or as the requirement of clients.Stored: in a cool , ventilated, dry place.

Product Name: Disposable Vinyl/Nitrile Blend Examination Gloves One-time use, no sterilization, no latex Single use, non-sterile, Latex free Model: S, M, L, XL Sizes: S, M, L, XL Color: blue, green, black, etc. Color: Blue, Green, Black etc. Structure: 5 fingers, with curling, regardless of left and right hands Structure: 5 fingers, beaded cuff for easy donning, ambidextrous Surface type: smooth surface Surface: Smooth Features : PVC/nitrile synthetic gloves are made of PVC resin and nitrile latex material. The product has PVC and The double advantage of nitrile gloves. The Vinyl/Nitrile Blend gloves is compounded with PVC paste and Nitrile latex, and the finished product has the advantage of both PVC and Nitrile glove. The donning feeling is better than vinyl gloves. Much softer than vinyl gloves Sturdy, wearable, longer wearing time than nitrile gloves The wearing time is longer than nitrile gloves. Has good wet hand wearability, easier to wear than nitrile and PVC gloves Easy donning with wet hands and easy donning than nitrile &vinyl gloves. PU coating, free of protein, effectively reduces the risk of allergies PU coating, with no protein in it, allergy risk is reduced effectively. Has better protection, has better acid resistance, alkali resistance and oil resistance Better protection, good resistance of acid, alkali and oil. Better cost-performance

Frankincense Resin Viscous Liquid

--Application-- 1. Foodstuff Industry - Gum Rosin is firstly converted into hydrogenated rosin, and then used to produce chewing gum 2. Paints & Coating Industry - Rosin is a basic material for paint industry because rosin is easy to dissolve in alcohol,turpentine and others organic solvent. Rosin always is converted to resinate, and then refine with drying oil such as tung oil and mix with volatility solvent to produce various lacquers. Rosin also take important role in producing road coating, rosin firstly converted to rosin malefic ester or polymerized rosin or disproportionated rosin Polyols ester, and then used to make thermoplastic coating for road sign inunction. 3. Metal Processing Industry - Rosin mainly is used as solding aid and metal polishing agent. Rosin is a kind of weak acidity matter, it can remove oxidation film from metal surface and slightly erode the surface of metal, and therefore, lots of solding aid agents contain rosin. 4. Construction Materials Industry - Rosin mainly is used as concrete frothing agent and floor tiling adhesive. 5. Papermaking Industry - Most rosin was applied to papermaking industry as sizing agent. Rosin paper sizing agent can prevent printing oil soaking and dispersing from paper, improves the strength and smoothness of paper; enhances the anti-abrasion of paper. But crystal rosin is unfit for making paper sizing agent due to difficulty of saponification, subsequently makes spot on the paper; sometimes even makes the pipe jam in paper sizing agent producing.

Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor

"FroSin Modified Tapioca Starch is a Tapioca based modified, Vegan, Gluten-Free, Plant-based, Non-GMO starch It is produced by combination of chemical and physical modification to enhance its yield improving properties which is extensively used in extruded products such as vermicelli, Noodles, Pasta, Macaroni, Frozen foods, Instant foods, etc., "