NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories.
Product Description NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc 355x25.4 x3.8mm Cutting accuracy Vertical deviation of notch and rail0.30mm Deviation of bidirectional cutting interfaces0. 35mm Cutting time 110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Product Description NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM â?¥4500 r/min Specification of cutting disc �?355x�?25.4 x3.8mm Cutting accuracy Vertical deviation of notch and railâ?¤0.30mm Deviation of bidirectional cutting interfacesâ?¤0. 35mm Cutting time â?¤110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories.
NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc 355x 25.4 x3.8mm Cutting accuracy Vertical deviation of notch and rail 0.30mm Deviation of bidirectional cutting interfaces 0. 35mm Cutting time 110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories.
Advance 1). We are 100% manufacturer 2). With Good workshop environment(under constant temperature all the year round) to ensure stable quality; 3). With Advanced tunnel kiln baking equipment, Continous production, short cycle, high quality: 4). High stability and high temperature resistance; 5). Reduce material loss, low noise and low dust; 6). High efficiency, good cutting sharpness, high durability, with long uselife; 7). Fast comprehensive after-sales service. Packing 1). Shrink package first, 2). Inner brown box/colour box or plastic box/ metal box for 4"~5" discs; 3). Stardand export brown carton or color box. 4).Shipping by sea from china-mainland port
Product Description NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc �?355x�?25.4 x3.8mm Cutting accuracy Vertical deviation of notch and railâ?¤0.30mm Deviation of bidirectional cutting interfacesâ?¤0. 35mm Cutting time â?¤110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Product Description NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM â?¥4500 r/min Specification of cutting disc �?355x�?25.4 x3.8mm Cutting accuracy Vertical deviation of notch and railâ?¤0.30mm Deviation of bidirectional cutting interfacesâ?¤0. 35mm Cutting time â?¤110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Product Description NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc 355x25.4 x3.8mm Cutting accuracy Vertical deviation of notch and rail0.30mm Deviation of bidirectional cutting interfaces0. 35mm Cutting time 110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Product Description NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc 355x25.4 x3.8mm Cutting accuracy Vertical deviation of notch and rail0.30mm Deviation of bidirectional cutting interfaces0. 35mm Cutting time 110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Potassium feldspar refers to a number of minerals in the feldspar group, and containing potassium: Orthoclase (endmember formula KAlSi3O8), an important tectosilicate mineral that forms igneous rock. Microcline, chemically the same as orthoclase, but with a different crystalline structure. Feldspar is used as a flux in ceramic and glass industries. It also adds strength to the body. Feldspar is a rare occurrence of extremely pure mineral free from mica. The chief use of Feldspar is in the Ceramic and Glass Industries. In ceramic bodies, the main vitrifying (fluxing) agent is feldspar. Application Industries: Ceramics, Tiles and Sanitaryware Glazes Glass Industry Bonding agent for abrasives, wheels, discs, and other shapes. Dental ceramics. Product Variants: Granular Particles Powder form (100-350 Mess BSS) Lumps (Dressed ore in raw form) Packing: The standard packing units are 50 kg HDPE Bags, 1000 Kg, and 1350 Kg jumbo bags. However, we can also make the packing units as per customer requirements.
Soda Feldspar is generally a clean white mineral which sources sodium, alumina, and silica along with some potassium and calcium. Albite mineral from which soda feldspar is derived is often tends to be white in appearance compared with the pinkish hue of orthoclase mineral from which potash feldspar is ground. Feldspar is used as a flux in ceramic and glass industries. It also adds strength to the body. Feldspar is a rare occurrence of extremely pure mineral free from mica. The chief use of Feldspar is in the Ceramic and Glass Industries. In ceramic bodies, the main vitrifying (fluxing) agent is feldspar. Application Industries: Ceramics, Tiles and Sanitaryware Glazes Glass Industry Bonding agent for abrasives, wheels, discs, and other shapes. Dental ceramics. Product Variants: Granular Particles Powder form (100-350 Mess BSS) Lumps (Dressed ore in raw form) Packing: The standard packing units are 50 kg HDPE Bags, 1000 Kg, and 1350 Kg jumbo bags. However, we can also make the packing units as per customer requirements.
NQG5.1 Rail Cutting Machine To furnish the varying desires of our customers, we are immersed in offering a world class consignment of Abrasive Rail Cutter. Abrasive Rail Cutter is suitable for cutting upto 60 Kg. 110 uts Rails. the machine has features of fast cutting speed, high utilization rate of cutting discs, high quality of cutting profile, convenient operation, easy motion and safe use. the machine comprises of petrol driven engine, integrated with a cutting unit fitted with an abrasive disc. Specification NQG-5.1 Rail Cutting Machine Material Dimensions (L x W x H) (mm) 800*560*500mm Engine GX270 petrol engine 5.1KW Specification of cutting disc 400*32 *4mm Cutting disc no. of revolutions 3320 r/min Linear speed of cutting disc 70m/s Cutting accuracy Verticality0. 4mm, flatness0.3mm Cutting time 2 min ( cut off 60kg/m rail) Weight 50kg
To furnish the varying desires of our customers, we are immersed in offering a world class consignment of Abrasive Rail Cutter. Abrasive Rail Cutter is suitable for cutting upto 60 Kg. 110 uts Rails. the machine has features of fast cutting speed, high utilization rate of cutting discs, high quality of cutting profile, convenient operation, easy motion and safe use. the machine comprises of petrol driven engine, integrated with a cutting unit fitted with an abrasive disc.
Quick Details Disc Type:FLAP DISCS Grit:240, 120, 320, 80, 40, 220, 60, 36 Place of Origin:Henan, China Brand Name:Yihong Abrasive:Zirconium Corundum Substrate:fiberglass backing pad Outer Diameter:115 Inner Diameter:22 Size:4inch Diameter:115mm Layers of fibergass:8 layers Metal ring:2 ring Hole diam.:22.23mm Full Outer diameter:100mm,115mm,125mm,150mm,180m,230mm Colour:Brown, Blue, Grey All hole diameter:16mm,22.23mm All metal rings available:1 or 2 Backing surface:black paper or non-woven cloth Exported countries:Germany,Italy, Turkey, Brazil, India and other countries
NQG 5III Internal combustion rail cutting machine is suitable for cutting rails of 43kg/m 75kg/m . The quality of cutting section meets the requirement of railway industrial standards. Its a necessary tool used in railway overhaul, maintenance and rush repairing operation. It has features of fast cutting speed, high utilization rate of thin grinding wheel, high quality of cutting section, easy operation, easy movement, safe use and wide application range etc. Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 670*600*510mm Brand Name Linkage Internal combustion engine HONDA GX200 Engine Power 4.8kW Engine Speed 3600r / min Thin grinding wheel (spindle) Spindle speed 3030r / min Specification (linear velocity) 400 * 32 * 4 (â?¥70m /s) Cutting time 60kg / m rail, â?¤120S Number of usage 50kg /m rail, use â?¥ 4 times Number of usage 2 60kg /m rail, use â?¥ 3 times Machine weight 39.5kg
Hello Sir, How are you? This is Rita from Zhengzhou Yuhong Abrasive Co.,ltd. Our company is an Abrasive Disc factory in China for more than 20 years. We supply Cutting disc, Grinding disc, Flap disc, all for metal finishing and polishing. If you interest to buy disc, welcome to send enquiry to us, with details of which size in need? how many quantity (pieces) in need? shipping to which seaport or location? We will give quotation soon upon your reponse.
Crafted from the fibers of the mature loofah plant (Luffa), ensuring a biodegradable and environmentally friendly choice. Free from synthetic materials or harmful chemicals for a pure and natural bathing experience. Features a mildly abrasive texture that exfoliates the skin, removing dead cells and promoting a healthy glow. Gently rejuvenates the skin without causing irritation, suitable for all skin types. Lightweight yet durable design ensures a long-lasting and effective exfoliating tool. Withstands regular use, maintaining its integrity for an extended period.
FLAP DISC TYPE Z for universal maching tasks with very high stock removal rates and heavy-duty use Application:for grinding tasks such as weld seam dressing on planar surface,sutiable for duty deburing and beveling work on stainlesss and high temperature steels. Advantages of type Z 1.Very high stock removal rate 2.Very short maching times 3.Cool grinding properties prevent thermal damages 4.Made of zirconia alumina grain with a high grit strength for maxmum grinding efficiency in general purpose applications. Grit Size: 40#,60#,80#,120#,180#,220#,240#,280#,320# Disc Size: 4",4.5",5",6",7" T27 FLAT TYPE T29 ANGLE GRINDING TYPE 27Z10016Y 100*16 4x5/8 27Z11522Y 115*22.2 4-1/2x7/8 27Z12522Y 125*22.2 5x7/8 27Z15022Y 150*22.2 6x7/8 27Z18022Y 180*22.2 7x7/8
