Lead Free Flame Retardant Wires
LFFR wires are made of no-chemical Lead Free PVC insulation that ensures that they are safe for the environment. Its flame retardant property elevates the oxygen index which prevents the fire from spreading. They are used for internal electrification and power supply to all electrically connected equipment.
We are engaged in making Lead available in several forms including
LME registered and non registered 99.97% and 99.99% as well as
secondary ingots, foil, granules, powder, rod, shot, sheet, and wire.
Lead is a bluish-white lustrous metal. It is very soft, highly malleable, ductile, and a
relatively poor conductor of electricity. It is very resistant to corrosion but tarnishes
upon exposure to air. Alloys include pewter and solder.
The Tire derived Steel or Tire Wire Scrap is a light melting scrap obtained during the shredding and granulation process of used tires.
Generally 10% - 20% of the weight of an old passenger car tyre usually consists of steel. An average shredding plant produces about 100-200 MT of steel tyre wire and its quality can vary according to technology, storing and management systems adopted by the producing plants.
We can provide tire wire scrap that still contains up to 20% rubber/fiber. This percentage is detected by manual separation test.
The material can be loaded loose in 40 HC container.
For further details, please feel free to contact us.
This type Chips that is designed to resist burning and melting at low temperatures.
Low Melting Point Polyester Chip for Hot Melt Yarn Masterbatch
Extrusion Grade Polymer for Hot-melt Adhesive Glue Coating
Description:
Generally speaking, the low melting point polyester chip refers to one specialty polymer with a melting point between 90 and 220.
The melting point of polyester is the temperature at which a solid crystalline substance changes from a solid state to a liquid. So it reflects the purity of polyester. Generally speaking, pure polyester is a partially crystalline polymer with a melting point of 265. But during actual production, some impurities exist in the polyester due to various side reactions. At the same time, the defects of polymer crystals and the difference in crystallinity will also affect the melting point. The common type of low melt polymer is 110. But we can also offer a melting point of 90, 120, 160, and 180.
Application:
Low-melt polyester chips can produce low-melting point fiber, low-melting point synthetic fiber, and thermal-melting mucilage. Its primary usage is acting as bonding fiber in nonwoven fabrics. The end usage lies in clothing, articles for bed, shoe uppers, sleeping bags, sofas, and hygiene products.
LM PET Chip is also the main raw material of masterbatch carriers. That is, low-melt PET chips, conventional chips, and dyes are mixed to produce the polyester color masterbatch according to a certain proportion. The production of this product is the introduction of polyester macromolecules into the modified copolymer unit. And its melting point is in the range of 100-120. Commonly used modifiers are phthalic acid, adipic acid, and trimethylolpropane.
Recently, LM Polymer is also extruded into the back coating of nonwoven, automotive interiors, foam, injection molding, PET sheets, and hot-melt adhesive/glue.
Low Melt Yarn is also called hot melt yarn or fusible yarn. There are sheath-core low-melt bicomponent yarn and full low-melt polyester yarn.
The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans.
At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.
The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.
The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.
The collected stock, is stored in open air, on cemented flooring.
Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace.
Please feel free to contact us for further details
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste.
After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material.
At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.
The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.
The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.
The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container.
Please feel free to contact us for further details.
Antimony trioxide Sb2O3 CAS 1309-64-4
Antimony trioxide mostly used as synesis which with halogen flame retardant in most of polymer materials compounding. It is also can be used as clarifier additive inside glass making. And used for ceramic glaze and pigment & coating. Main application: The product is mainly applied to the industries of plastics, rubber, chemical fiber, paint, enamel, pigments, glass and electronics. Physical and chemical indicators and its characters: the main content is between 98.00-99.90 percent and it also can be produced according to the requirements of customers. And the average particle size can be determined according to the requirements of customers.1. Used as a fire retardant in the membranes of plastic industry, the enclosures of electric devices and household electric
Industry - Welding, Oil & Gas, Petrochemicals etc.
Shell Composition -
GDI36-100% Cotton with FR Treatment.
Weight -
200 GSM to 320 GSM.
Size -
XS to 5XL (ASIA), 34 to 60 (US), 34R to 60R (UK), 44 to 70 (EU).
Safety Performance -
General :- EN ISO 13688, EN ISO 20471, ISO 15797
Arc :- EN 14116, EN 11611, EN 11612, NFPA 2112
Fire :- EN 61482, EN 1149, NFPA 2112.
Industry - Welding, Oil & Gas, Petrochemicals etc.
Composition -
GDI36-100% Cotton with FR Treatment.
Weight -
220 GSM to 320 GSM.
Size -
XS to 5XL (ASIA), 34 to 60 (US), 34R to 60R (UK), 44 to 70 (EU).
Safety Performance -
General :- EN ISO 13688, EN ISO 20471, ISO 15797
Arc :- EN 14116, EN 11611, EN 11612, NFPA 2112
Fire :- EN 61482, EN 1149, NFPA 2112.
We source high quality Ores and Others that are majorly used in numerous of Industries for diverse uses. The wide collection of Mineral Ores is free from impurities and rich in other essential features. Our esteemed client’s can avail the wide gamut of Mineral Ores at very pocket friendly price.
We deal in
* Bauxite ore
* Copper ore
* Lead ore
* Nickel ore
* NPI -Nickel pig iron
* Tin ore
* Zinc ore etc
Copper No. 2 kinds of alloy Wire cooper without lines, containing impurity, contain Copper quantity for 96% (minimum content 94%).
Shall not contain excessive lead and tin change of copper wire, welding of copper, brass and bronze line, excessive oil, prohibition and nonmetal,crisp, burning line, utterly margin of fine copper and excessive yarn. Need appropriate means to remove dirt. Birch Shall consist of clean, untinned, uncoated, unalloyed
copper wire and cable, not smaller than No. 16 B & S
wire gauge, free of burnt wire which is brittle
Copper No. 2 kinds of alloy Wire cooper without lines, containing impurity, contain Copper quantity for 96% (minimum content 94%).
Shall not contain excessive lead and tin change of copper wire, welding of copper, brass and bronze line, excessive oil, prohibition and nonmetal,crisp, burning line, utterly margin of fine copper and excessive sexual yarn. Need appropriate means to remove dirt. Birch
Shall consist of clean, untinned, uncoated, unalloyed
copper wire and cable, not smaller than No. 16 B & S
wire gauge, free of burnt wire which is brittle
This Designer Jute Beach Bags are really good for promoting/branding or as a free gift. It’s simple bag which has lots of printing area so you can print your message on it for your target customers. Brilliant craftsmanship is given to this bag to provide customer satisfaction.
We are leading manufacturer & exporter of exclusive range of Embroidered small Jute Designer Bags. We offer eco-friendly, natural & stylish Jute Designer Bag
Industry - Welding, Oil & Gas, Petrochemicals etc.
Composition -
GDI36-100% Cotton with FR Treatment.
Weight -
220 GSM to 350 GSM.
Size - XS to 5XL (ASIA), 34 to 60 (US), 34R to 60R (UK), 44 to 70 (EU).
Safety Performance -
General :- EN ISO 13688, EN ISO 20471, ISO 15797
Arc :- EN 14116, EN 11611, EN 11612, NFPA 2112
Fire :- EN 61482, EN 1149, NFPA 2112
Industry - Welding, Oil & Gas, Petrochemicals etc.
Shell Composition -
GDI36-100% Cotton with FR Treatment.
Quilting -
Padding: 100% Non-woven Polyester
Lining : 100% Polyester fabric.
Weight
200 GSM to 320 GSM.
Size -
XS to 5XL (ASIA), 34 to 60 (US), 34R to 60R (UK), 44 to 70 (EU).
Safety Performance -
General :- EN ISO 13688, EN ISO 20471, ISO 15797
Arc :- EN 14116, EN 11611, EN 11612, NFPA 2112
Fire :- EN 61482, EN 1149, NFPA 70E.
13507 Lead Free Flame Retardant Wires Suppliers
Short on time? Let Lead Free Flame Retardant Wires sellers contact you.
