Keywords: (2s, 3s)-2, 3-dihydroxysuccinic acid; D-threaric acid; (2s, 3s)-(-)-tartaric acid; D-(-)-tartaric acid; D(-)-tartaric acid; Quick details: Cas no: 147-71-7 Molecular formula: c4h6o6 Package: 200kg/drum, 25kg/ complex kraft bag Assay: 99.5%min Appearance: white crystals Application: in medicine as laxatives and diuretics, synthetic analgesicslaxative, can be used as beverages and other food acidifier.
We can supply Acetic Acid Industrial Grade and Food Grade. Commodity:Acetic acid. Other name: Glacial acetic acid Molecular formula CH3COOH CAS:64-19-7 EC No.200-580-7 Introduction: Annual capacity of our glacial acetic acid is 350,000.the raw material is methanol.we use a new technical process to produce: Methanol decomposition. the most important characteristic of this way are as following: mild oder; high quality--can reach 99.99%min; low cost--30% lower than oil decomposition and ethanol decomposition way. Specifications: Apha color:
4-Hydroxybenzoic acid Chemical Name:4-Hydroxybenzoic acid Trade Name:p-oxybenzoic acid Molecular Formula:C7H6O3 Molecular Weight:138.12 CAS No.:99-96-7 Properties:white odorless crystalline powder, easily soluble in hot water and alcohols, aethers and acetone, slightly soluble in cold water and benzene, insoluble in carbon bisulfide; relative density is 1.46 Use: Can be used as antiseptic, intermediate of dyes, pharmaceuticals; as main material of liquid crystal polymers; as material of pesticide intermediate Specification Item Specification Polymer Grade Technical Grade Appearance white crystal powder white crystal powder Purity(on dry base) % 99.6 99.0 Melting Point 214-217 212-216 Odor odorless odorless Solubility Clear and transparent clear and transparent Loss on Drying % 0.20 0.50 Color(Pt-Co) 10 40 Ash % 0.02 0.15 Sulfate(SO42-) 0.01 0.05 Chloride(Cl-) % 0.005 0.02 Phe% 0.01 0.10 Salicylic Acid % 0.02 0.10 4-Hydroxyisophthalic Acid(HIPA) ppm 500 / Insolubles in Metha ppm 50 / Potassium(K+) ppm 5 / Sodium (Na+) ppm 5 / Iron (Fe) ppm 5 / Ca2++Mg2+ppm 5 /
Formula:KAl(SO4)2 12H2O Relative Molecular Weight:474.39 CAS NO,: 7784-24-9 EINECS No.:5637-689-7 HS CODE.: 2833301000 Appearance: lump, white crystal, white powder Properties:Colorless, transparent, particle or crystalline powder, odorless, nontoxic, tastes slightly sweet and puckery, astringent, easily soluble in water, its water solution appears acid,is would lose crystal water and become white powder on heating Usage; Food industry: Buffering agents and leavening agents in food-grade products. Chemical Industry: Water Flocculant, aluminum tanning agents and after-treating agents for leather tanning in the leather industry, dyeing agents,Astringents,mordants etc. Items Specifications Potassium aluminum sulfate [AlK(SO4)2.12H2O] % 99.5 Plumbum(Pb) mg/kg 5.0 Arsenic (As) mg/kg 2.0 Fluorine (F) mg/kg 30.0 Selenium (Se) mg/kg 30.0 Moisture % 4.0
Commodity: Sodium Hydrosulfite Other name: Synonyms: Sodium Hydrosulphite; Sodium Dithionite; Dithionous acid, Disodium salt; Sodium Sulfoxylate CAS No.: 7775-14-6 Molecular Weight: 174.10 Chemical Formula: Na2S2O4 Product Description Appearance: White, crystalline powder. Product Feature Odor: Slight irritative. Specific Gravity: Unavailable Solubility: Soluble in water. Density: 2.19 pH: 6-7 pH Test-Method: PH test paper. % Volatiles by volume @ 21C (70F): 0 Boiling Point: Not applicable. Melting Point: >300 C Decomposes. Vapor Pressure (mm Hg): No information found. Bulk Density: ~0.9 Evaporation Rate (BuAc=1): No information found. Application 1. Widely used in textile industry for vat dyeing, reduction cleaning, printing and stripping, textile textile bleaching . 2. bleaching paper pulps , especially mechanical pulps, its the most fittable bleaching agent in pulps. 3. bleaching kaolin clay, fur bleaching and reductive whitening, bleaching of bamboo products and straw products, 4. in mineral, the compound of thiourea and other sulphides. 5. as reducing agent in chemical industry. 6. Sodium hydrosulfite food additive grade is used in foodstuffs, as bleaching agent and preservative dried fruits, dried vegetable, vermicelli, glucose, sugar, rock sugar, caramel, candy, liquid glucose, bamboo shoots, mushrooms and canned mushrooms. Packaging 50kg/100kg net in iron drums with double PVC bags Product Specification/Models NDEX 90%, 88%, 85%. FOOD ADDITIVE Na2S2O4, 90%, 88%, 85%, Fe 20ppm ZincZnOther heavy metal calculated as Pb, 1ppm Water Insolubles05% Shelf Life(month)12
D-Aspartic Acid, CAS No.1783-96-6, an isomer of L-Aspartic Acid manufactured through fermentation, available as White Crystals or crystalline powder. D-Aspartic Acid is an amino acid widely used in nutritional supplements, nutrition enhancers, dietary supplements, health food additives, pharmaceutical raw materials, sports supplements, sports nutritional supplements, and bodybuilding supplements. As an experienced D-Aspartic Acid manufacturer and supplier, we has been supplying and exporting D-Aspartic Acid for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Product Description Categories Amino Acids Qty in 20â??FCL 10000kg Min Order 500kg Origin China Packaging Factory Packaging or Neutral Certificate ISO, Kosher, Halal, BRC CAS No. 1783-96-6 HS Code 292249 Specification Feed/Food Grade
MOQ: 10,000 Barrels per Month Supply Ability: 1,000,000 Barrels per Month JP54 Technical Specifications: ADDITIVES Antioxidant in hydro processed fuel mg/l min 17 max 24 Antioxidant non hydro processed fuel mg/l max 24 Static dissipater first doping ASA- 3 mg/l max 1 Stadis 450 mg/l max 3 COMBUSTION PROPERTIES Specific energy, net mi/kg min 18.4 D 4808 Smoke point mm min 19 D 1322 Lumininomitter number min 45 D 1740 Naphtales % vol max 3 D 1840 Propriety unit min max result test ip method ASTM COMPOSITION Total acidity mg KOH /g max 0.01 354 D 3242 Aromatic % vol max 22.0 158 D 1318 Sulphur, total % mass max 0.30 107 D 1266/2622 Sulphur mercaptan % mass max 0.003 342 D 3227 Doctor test 30 D 4952 VOLATILITY Initial boiling point centigrade max report 123 D 96 10% vol at C 240 20% vol at C report 50% vol at C report 80% vol at C report End point centigrade max 42 170/303 D 56 / 3828 Density at 15 C kg m2 min /max 776/840 180/385 D 1298 LOW TEMPERATURES PROPERTIES freezing point centigrade max 40 15 D 1298 Corrosion copper (2hrs at 100 C) Corrosion silver (4 hrs at 500C) max 1 227 STABILITY Thermal stability control temp. 280C 323 Filter pressure, differential mm. Hg max 25 Tube deposit rating (visual) max
We are supplying Magnesium sulphate anhydrous/heptahydrate/monohydrate Magnesium Sulphate Hepta Hydrate Magnesium as Mg - 9.7% (min.) Magnesium as MgO - 16.3% Sulphur as S - 12.4% pH of 5% solution - 6 to 7 Physical Appearance: White crystals Magnesium sulfate can be used in leather making, explosives, paper making, porcelain, fertilizer, and oral laxative in medical treatment. Magnesium sulfate is used as a fertilizer in agriculture because magnesium is one of the main components of chlorophyll, and its advantage over other fertilizers is higher solubility. Industry It is used in leather making, explosives, fertilizer, paper making, porcelain, printing and dyeing materials, lead-acid battery and other industries.
We are supplying Magnesium sulphate anhydrous/heptahydrate/monohydrate Magnesium Sulphate Hepta Hydrate Magnesium as Mg - 9.7% (min.) Magnesium as MgO - 16.3% Sulphur as S - 12.4% pH of 5% solution - 6 to 7 Physical Appearance: White crystals Magnesium sulfate can be used in leather making, explosives, paper making, porcelain, fertilizer, and oral laxative in medical treatment. Magnesium sulfate is used as a fertilizer in agriculture because magnesium is one of the main components of chlorophyll, and its advantage over other fertilizers is higher solubility. Industry It is used in leather making, explosives, fertilizer, paper making, porcelain, printing and dyeing materials, lead-acid battery and other industries.
PRODUCT DATA SHEET ACID RESISTANT BRICK Material : FIRECLAY Type Acid Resistant Brick Size (mm) : 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK) Specification : ASTM C279, ASTM C410, IS 4860-1982 DESCRIPTION : * We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required. FEATURES OF ACID RESISTANT BRICK: * Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature AREA OF APPLICATION: Chemical Analysis (Average) Acid and Alkali Storage Tank Farms Demineralization plants and Water treatment plants Chimney inside lining, FGD linings Towers and Columns Process Vessels and Tanks Sewerage Treatment Plants and Lines Industrial Flooring and Bund Areas Chimney and Flue Gas Linings Hoppers and Chutes SiO266.4 Al2 0324 TiO21.1 Fe2 O31.1 K2 O + Na2 O2.5 NOT RECOMMENDED: HF acid or other fluoride solutions - Heavy thermal shock Characteristic Fireclay Type Acid Resistant Brick - Test Standard Bulk Density, lbs/ft3 - 2.25 to 2.30 ASTM C-20 Water Absorption, % - 0.1 to 1.8 ASTM C-20 Apparent Porosity, % - 4.05 to 4.14 ASTM C-20 Acid Solubility (H2SO4), Loss in Mass,% - 6.1 to 6.8 ASTM C-279 Modulus of Rupture, Mpa - 14.6 ASTM C-67 Compressive Strength, PSI - 15500 to 17250 ASTM C-67 Abrasion Resistant , Volume in mm3 - 71 to 96 EN 102 Surface Hardness, MOHS Scale - 7 Thermal Conductivity, BTU-in/hr-ft-F - 6.94 to 7.12 ASTM C-236 Thermal Expansion Coefficient,in/in/Fx10-6 - 2.6 to 2.8 EN 103
Phosphoric Acid, E338, CAS no.7664-38-2, a mineral acid, colorless, transparent syrupy liquid. Phosphoric Acid is an acidity regulator and nutrition agent for yeast food, and it applied to flavors, canned food and light drinks as well as used in wine making. As an experienced Phosphoric Acid manufacturer and supplier, we has been supplying and exporting Phosphoric Acid for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Phosphoric Acid Specification NO. Specifications Phosphoric Acid Industrial Grade Phosphoric Acid Food Grade 1 Appearance Colorless, transparent syrupy liquid or in very light color 2 Colour 30 20 3 Assay (as H3PO4 )% 85.0 85.0 4 Chloride(as Cl- )% 0.0005 0.0005 5 Sulphats(asSO42- )% 0.005 0.003 6 Iron (Fe)% 0.002 0.001 7 Arsenic (As)% 0.005 0.0001 8 Heavy metals,as Pb% 0.001 0.001 9 Oxidable matter (asH3PO4)% 0.012 10 Fluoride,as F% 0.001
Specification: Free Fatty Acids (% As Palmitic) : 5.0% Max. Moisture And Impurities (AOCS Ca 2c-25) : 0.1-0.25% Max. IODINE VALUE (Wijis) (AOCS Cd 1-25) : 50-55 Min. SLIP MELTING POINT (AOCS Cc3-25) : 33-39 C Max. COLOUR (Lovibond 5.25 cell) : 3.5R/3.5Y Max. DOBI : 2.31 Min Purity and freshness are the highlights of Crude Palm Oil, which we make available. This Crude Palm Oil is processed hygienically as per the set rules and regulations. We are rated as a dependable Manufacturer and Exporter of Crude Palm Oil. Packing Size: 1) PET Bottle 0.25L, 0.50L, 1L, 2L, 3L, 5L 2) HDPE Jerry Can 1L, 2L, 3L, 5L, 8L, 10L, 16L, 18L, 20L, 25L 3) Big Mouth HDPE Jerry Can 10L, 16L, 18L 4) Tin Can 16L, 18L, 20L 5) Steel Drum 190kgs 6) Plastic Drum 190kgs 7) Bag In Box 20L 8) Flexi Tank 21MT Quality:CP6, CP8, CP10
Breeder Developer Duck Feed (D-040215) We rule the industry by offering a broad array of� Duck Breeder Developer Feed� that is highly appreciated by our valuable customers. Our product is prepared using high-grade ingredients that are bought from the famous vendors. This product is verified on quality parameters to guarantee our patrons requirement satisfaction. Product Details: Crude Protein (N x 6.25)(maximum %) : 14.5 Crude Fat (maximum %) : 2.0 Crude fibre (maximum %) : 7 Acid-insoluble ash(maximum %) : 4.0 Moisture (maximum %) : 12 General Details Specification Ingredients : Corn Gluten Meal, DDGS, Pluses, Essential Amino Acids, Vitamins, Minerals, Trace Minerals, Toxin Binders and Mold Inhibitor Ingredient Profile :100% Vegetarian Moisture (% Maximum) : 12 Product Form : Coarse Mash Form / Pellet Form Product Branding : HAF�® Net Weight : 39 Kgs When Packed
Layer Chick Feed Chick Mash PLF060720 Product Details Crude protein N x 625 maximum 20 Crude Fat maximum 7 Crude fibre maximum 70 Moisture maximum 11 Acidinsoluble ash maximum 40 Salt as NaCl maximum 06 Calcium Ca maximum 10 GENERAL DETAILS Ingredients  Corn Gluten Meal Wheat Gluten Soy Meal DDGS Grains Pluses Essential Amino Acids Vitamins Minerals Trace Minerals Toxin Binders and Mold Inhibitor Ingredient Profile  100 Vegetarian Moisture Maximum 12 Product Form  Coarse Mash Form Pellet Form Product Branding HAF Net Weight  39 Kgs When Packed Product Pricing  On Unit Basis for each 39 Kgs Packing Production Capacity per Day  450 MTDay Factory Visit  Not Permissible Fumigation  Aluminum Phosphide or Methyl Bromide or any as per buyer specification Clinical Test Methodology  As per IS2052 Proximate Analysis on Dry Matter Basis
DL-Tartaric Acid, E330,CAS no.133-37-9, is a 1:1 mixture of L-Tartaric acid and D-Tartaric acid. DL Tartaric acid and its derivatives have a plethora of uses in the field of food and beverage. As an experienced DL-Tartaric Acid manufacturer and supplier, we has been supplying and exporting DL-Tartaric Acid for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. DL-Tartaric Acid Specification Item Specification â??FCCIV/BP98 Name DL-Tartaric Acid Appearance White powder Purity(as C4H6O6) >99.7% Molecular formula C4H6O6 Melting Point 200-206�ºC Loss on drying
Categories Acidulents Qty in 20' FCL 20000kg Min Order 1000kg Origin China Packaging Factory Packaging or Neutral Certificate ISO, Kosher, Halal, BRC E No. E334 CAS No. 87-69-4 HS Code 291813 Specification FCC/USP L-Tartaric Acid, E334, CAS no.87-69-4, food acidulent, Chemical Formula C4H6O6. The manufacturing process via chemical synthesis. Tartaric acid is used as an acidifying agent in candy, jams and jellies to give these products a sour or tart taste. As an experienced L-Tartaric Acid manufacturer and supplier, we has been supplying and exporting Betaine Monohydrate for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day.
Potassium Bitartrate, E336,CAS no.868-14-4, food acidulent, a potassium salt of L-tartaric acid, also known as potassium acid tartrate and cream of tartar in cooking, colorless crystals or white crystal powder. As an experienced Potassium Bitartrate manufacturer and supplier, we has been supplying and exporting Potassium Bitartrate for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Potassium Bitartrate powder Specification Item Index Content % 98.0~103.0 Identification A,B,C passed Acidity or alkalinity passed Loss on drying %(105C) 2.7 Arsenic % 0.15 Plumbum (Pb) % 0.04
Plant Source: Stem and Leaf Appearance: Yellow-brown powder CAS 8014-71-9 Specification: 10:1;1%-10% Flavones;1%-10% Rosmarinic acid For price and other details please contact us.
DATEM, E472e, CAS No.6027-23-2, also called diacetyl tartaric acid ester of mono- and diglycerides, food emusifier, a hydrochloride salt of Hordenine manufactured through chemical synthesis. It is an ivory white powder or particle solid. DATEM has the functions to emulsify, increase stabilization, improve preservation, prolong shelf life, and protect freshness, etc. It is mainly used as food emulsifier in bread, cake, butter, hydrogenated vegetable oil and vegetable oil powder. As an experienced DATEM manufacturer and supplier, we has been supplying and exporting DATEM for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. DATEM Specification ITEM STANDARD Appearance White or off-white solid Acid Value (mgKOH/g) 68 Ester Value (mgKOH/g) 410 Heavy Metals(pb) (mg/kg) 0.1mg/kg Glycerol (w/%) 15 Acetic Acid (w/%) 15 Tartaric Acid (w/%) 13
L-Carnitine L-Tartrate, CAS No.36687-82-8, white crystalline powder, manufacturing process via chemical synthesis from L-Carnitine and L-Tartaric Acid. L-Carnitine L-Tartrate is widely used as a weight-loss and fat-burning supplement in body building. Such as in health products, sports beverages, and infant foods. As an experienced L-Carnitine L-Tartrate manufacturer and supplier, we has been supplying and exporting L-Carnitine L-Tartrate for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. L-Carnitine L-Tartrate Specification ITEM STANDARD Appearance White crystalline powder Specific rotation -9.5~11.0 Residue on Ignition % 0.5 Heavy Metals (ppm) 10 Arsenic(ppm) 1 Solubility Clarification PH(1%water solution 3.0-4.5 Water content % 0.5 L-Carnitine % 68.5 ±1.0 L-tartaric acid % 31.8 ±1.0 Assay % 98