-feeding size; 100mm; -output size of production: 6-38mm; -handling capacity: 500-1200kg/h; -ce certificate; -e-stop interlock device; Plywood case for each jaw crusher; Dimension:113x127x80cm; Weight:about 585kg
This jaw crusher is ideal for primary and secondary crushing. With the increase of production, our jaw crusher can greatly reduce the operating costs. And it is of reliability and flexibility. The large feed opening and force-feeding action from the inward and downward eccentric movement of the swing jaw mean that our jaw crusher can increase the capacity. The jaw has a smaller discharge setting, allowing for a higher degree of flexibility with relative equipment. Positive setting adjustment is easy. The jaw crusher has features of simplicity, easy access and low maintenance.
Jaw crusher is widely used in many industrys including Mining, Construction, Quarry, Ore, Stone, Chemical Industry, Metallury, Building Materials, Highway, Road and so on. It is suitable for the primary or secondary crush of large rock with compressive resistance no more than 320MPa. PE Jaw Crusher is used for primary crushing, and PEX jaw crusher is used for secondary and fine crushing.
Airport Trolly For Luggage Carry
Urea 46%, frozen chicken, frozen beef, sugar icumsa 45, soybean, yellow corn, maize, n.p.k for agriculture, npk, glue, lamination glue, based water glue, adhesive, bitumen.
Product name BBQ Charcoal Keyword BBQ Charcoal Charcoal Specification Black color BBQ charcoal - pillow shaped coconut charcoal briquettes Photograph attached. It would be 42 grams weight of one pcs pillow shaped as u can see in pics Size is 40*40 mm all four sides 4/4 cm . Lab report will be provided.
We supply high grade face veneer or core veneer. Wood species available: eucalyptus, acacia, poplar, keruing, okume, birch, pine etc. Our core veneer can be used for commercial grade plywood, film faced plywood, packing plywood. 1.Rotary cut : 1,270 x 640 x 1.0MM, OR 1.7mm 2.Sliced cut: 1270x Width 60mm upward , 0.45mm upwards 3.Thickness Tolerance: -0.03, + 0.05 4.Content Moisture: 18 % max 5.Drying process; Sundry or oven dry. 6.Cutting Process: Rotary Cutting/ Sliced cutting Grade A: 1. Full sheet of same color, no dead knot and small hole. No tear, No Joints 2. Whole piece (no joints) with live knots, limited dead knots, some small holes not more than 2cm in diameter. Also available in mix of grade A and B We can supply in following grade 1Grade A: 100% 2Grade A :90%+ Grade B:10% 3Grade B: 100%
-White Charcoal, also known as Binchotan, is a type of hardwood charcoal that has traditionally been produced in Japan. It is called White charcoal because of its light color and unique benefits that create economic value compared to traditional black charcoal. -Binchotan is the purest charcoal on earth by the highest carbon proportion (more than 92%) and is completely odorless, and smokeless when burning. White Charcoal is more difficult to ignite than black charcoal; however, it burns hotter and longer. When hitting the pieces together, it gives a light metallic sound. The white charcoal doesnot break into small pieces while burning. USAGES Food grilled over white charcoal retains its natural flavor and moisture because it burns cleanly and without flames. It is popular in high-end restaurants and mostly in Korea and Japan. In addition, binchotan has many uses such as water purification, exhaust filter, deodorant, skin care, metallurgy, used in battery manufacture...
ModelPE-150*250 Feed opening150*250(mm) Max.feeding size125(mm) Adjusting range of discharge opening10-40(mm) Processing capacity1-3 (t/h) Rotation speed of eccentric shaft250(r/min) Motor power5.5(kw) Total weight (t):0.8 Dimensions(L*W*H)(mm):720*660*850 PE-150*250
We are able to supply Tin in many forms including LME registered and non registered, ingots, slabs, bars, foil, granules, powder, anodized activated powder, shot, wire, sticks, ingots, and “mossy tin”. Tin is a silvery-white metal, is malleable, somewhat ductile, and has a highly crystalline structure. The element has two colours, with a cubic structure which changes at allotropic forms. On warming it is grey, the ordinary form of the metal. When Tin is cooled below 13.2°C, it changes slowly from white to grey or tetragonal structure. This change is affected by impurities such as Aluminium and Zinc, and can be prevented by small additions of Antimony or Bismuth.
The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.
This series product is suitable for the geological, metallurgical, building materials, chemical industry, coal, mineral processing, scientific research institutes and other units of the laboratory, laboratory crushing all kinds of medium and low hardness of ore and rocks. Tenchnical Parameters modelroller size(mm)max feeding granularity(mm)discharge granularity(mm)output(kg/h)motor power(kw)roller speed(r/min)boundary dimension(mm)Equipment weight(kg) 2007520075100-43001.5450600460880150 200125200125100-4500-12003400700500880155 200150200150100-4600-15003400700500880170 250400250400322-82000-1000011200133214908201300
Model:pe-200*300 Feed opening (mm):200*300 Max.Feeding size (mm):180 Adjusting range of discharge opening (mm):15-50 Processing capacity (t/h):2-6 Rotation speed of eccentric shaft (r/min):260 Motor power (kw):7.5 Total weight (t):1.2 Dimensions(l*w*h)(mm):910*750*990
Conveyor rollers, carrying rollers, return rollers, conveyor idlers, belt conveyor roller, smsr gearbox, belt conveyor pulley, v belt pulley, conveyor roller bearing housing, conveyor belt, stone crusher parts, ci casting, casting parts, sg castings, die casting.
Juniper bushes can be found in eastern Europe, Bulgaria, Hungary, also in western Europe France and Spain and in north America - Canada. This evergreen shrub grows up to 6 metres tall. It has dark green or blue needles and small flowers and berries. The berries change colour over the first few years of growth. They start off green, but after a year or two, they turn black. Juniper is used to flavour food and drink and is the characteristic aroma in gin.
The jaw crusher is the main equipment for coarse crushing (a section of crushing). The main features are: Simple structure, reliable performance, easy operation, easy maintenance, safe use, strong applicability, cheap price. The jaw crusher is divided into two forms: compound pendulum and simple pendulum. The main parts of a broken jaw are: Frame, movable jaw, active eccentric shaft, supporting shaft (simply swinging), connecting rod, adjusting jack, Model description: Lining plate, fixed tooth plate, movable jaw plate, transmission bearing, movable jaw bearing, belt wheel, flywheel. Small jaw fracture is compound pendulum. Large jaw broken simple pendulum more, and the frame is divided into upper and lower compartments. Model description: P E F (J) XX to XX P: crusher E: jaw crusher F(J): Compound pendulum (simple pendulum) XX: Give the opening width mm/100 XX: Length of mine outlet mm/100
Brief introduction Jaw crusher is a kind of Stone crusher, and jaw crusher is also called Rock crusher. This series of Jaw crushers have many advantages which mainly used in breaking a variety of ore and the medium-size chunk of materials. The compression strength of the materials to be crushed is less than 320MPA. it can be divided into coarse crusher and fine crusher. We have all specification kinds of the products, and its feedstock size is 125mm-750mm. It is the first choice for Stone crusher plant; Primary jaw crusher is widely used in mining, metallurgy, building materials, roads, railways, water conservancy and chemical industries, etc. Features and Advantages 1) High efficiency and low operation cost; 2) Flexible capacity; Over loading protection; 3) Simple structure and easy to operate; 4) Easy replacement of wearing parts; 5) Long service life; High reliability; 6) Wide range of choices;Alternative ordinary and hydraulic types. Jaw crushers / Jaw breakers operating environment When in the process of the great broken stones broke into small stones, the first crusher is often referred to as �¢??master�¢?? crusher, the longest history and most solid crusher is jaw crusher. When feed to jaw crusher, materials from the top of the entrance into the broken room with tooth broken, the tooth broken tremendous force the material to the top of the wall, it will be broken into smaller stones. Supporting the tooth movement is an eccentric shaft. This axis runs through the fuselage frame. Eccentric movement is usually arisen by fixed at both ends of the flywheel axis. Flywheel and eccentric support bearing is often using spherical roller bearings. Bearing working environment is extremely harsh. Bearings must support enormous impact loadabrasive water and high temperature. Though the working environment is extremely harsh, the jaw crusher still can work very reliably. this is a key element to ensure the productivity. Working principle The main structure of the Jaw crusher are composed of stander, eccentric shaft, belt pulley, flywheel, movable jaw plate, wrist plate ,adjustable gap screw, offsetting spring, fixed jaw plate. The wrist plate also has the effect of guarding. This Jaw crusher�¢??s crushing style is the type of driving extrusion. The motor drives the belt and belt pulley to make the moveable jaw move through the eccentric shaft. When movable jaw is rising ,the included angle between the wrist plate and movable jaw become bigger to drive the movable plate to be close to the movable plate. At the same time the material is squeezed and rubbed, rolled to achieve multiple crushing; When movable jaw is descending, the included angle between the wrist plate and movable jaw becomes smaller. Now the crushed material is discharged from the crushing cavity, with the continuous rotation of the motor, the movable jaw crushing and discharging the material periodically to realize batch production.
The jaw crusher is of curved extrusion type. When working, the motor drives the belt and pulley to move the movable jaw up and down through the eccentric shaft. When the movable jaw rises, the angle between the elbow plate and the movable jaw becomes larger, so as to push the movable jaw plate to approach the fixed jaw plate. The material can be multi broken through the extrusion, rubbing and grinding between the two jaw plates. When the movable jaw goes down, the angle between the elbow plate and the movable jaw becomes smaller, and the movable jaw plate is under the action of the pull rod and spring. After leaving the fixed jaw plate, the crushed materials are unloaded freely through the discharge port at the lower part of the jaw cavity under the action of gravity. With the continuous rotation of the motor, the moving jaw performs periodic crushing and discharging to achieve mass production.
The jaw crusher is of curved extrusion type. When working, the motor drives the belt and pulley to move the movable jaw up and down through the eccentric shaft. When the movable jaw rises, the angle between the elbow plate and the movable jaw becomes larger, so as to push the movable jaw plate to approach the fixed jaw plate. The material can be multi broken through the extrusion, rubbing and grinding between the two jaw plates. When the movable jaw goes down, the angle between the elbow plate and the movable jaw becomes smaller, and the movable jaw plate is under the action of the pull rod and spring. After leaving the fixed jaw plate, the crushed materials are unloaded freely through the discharge port at the lower part of the jaw cavity under the action of gravity. With the continuous rotation of the motor, the moving jaw performs periodic crushing and discharging to achieve mass production.
PE Jaw Crusher series:broken granularity,simple structure,reliable operation,easy maintenance,low operating cost,widely used in mineral,smelting,construction,high-way, rail-way,irrigation area.It could be the first choice for raw material or second crushing.
