JLY-03 Series Early strength type is an eco-friendly new generation high performance polycarboxylate superplasticizer. It is based on the reaction between the molecule of polycarboxylate superplasticizer and cement, designing special structure molecule of polycarboxylate, to promote combination of granules of cements with hydrone, to finish hydrating and enhance the initial strength. FEATURES AND BENEFITS  Enhance high strength : It has higher early strength growth ratio, can reduce shrinkage performance and the carbonation rate of concrete.  High water reduction: Water reducing ratio can attain at least 25% at saturated dosage, which assures improving the workability of concrete, enhancing the concrete strength and saving cement application amount. Increase slump retention: No retempering, It can well delay the transport and on-site retention time of the concrete, assure the pumping performance of the concrete. Good cohesion: Ease of pumping, No delamination,No segregation or bleeding.  High flowability: Ease of placing and compaction. No segregation. RECOMMENDED FOR Pumped concrete Precast concrete Early strength concrete High flowability concrete  High early strength concrete Long distance transport concrete JLY-03 water reducing type series is available in 1000kgs, 200kgs, 25kgs drums or bulk delivery. Contact with us for more details please
High-performance Polycarboxylic Acid Superplasticizer is widely used in Concrete engineering. It can not only greatly reduce the amount of cement and water, but also significantly improve the workability of concrete, improve the quality of the project, reduce the cost of the project, save energy consumption, and have no pollution to the environment. FEATURES AND BENEFITS Improve the compressive strength of concrete (production of concrete with strength over 50N/mm²) Allows reduction of mixing water (up to 35%) without reducing the consistency of the concrete mixture. Reduced cement consumption, thereby reducing costs (while maintaining a constant water-cement ratio) Does not cause steel corrosion (low chloride content) RECOMMENDED FOR Pumped concrete High flowability concrete High durable concrete High strength concrete Ready-mixed concrete  Long distance transport concrete Dosage of JLY-01 should be decided according to the mix design, surrounding, the required water reducing rate and materials.Normal dosage is 0.7% weight of cement with a range of 0.25%-0.8%. Trial mixes should be made to determine the optimum dosage. For more details, please contact with us. Enjoy your day
Polycarboxylate superplasticizer products have been extensively used in cement or gypsum-based mortars with high fluidity and high strength requirements. It is widely used in fluid mortars, such as fluid mortar for pouring, paving, and painting. For price, specifications and more details please contact us
Item Company standard Jh pce Appearance Transparent pale yellow liquid Density (23 Ph value (23¡é) 6 Solid content (%) 50% Water reducing rate (%)25 Chloride content Na2so4content (%)5.0 Alkali content (%)5.0 Formaldehyde content (%)0.05 1.1ton/drum, 210kg/drum.
Model NO.: FOX 8HP Appearance: Powder Color: Light Yellow Efficacy: Water Reducing Type: Dispersant Classification: Chemical Additives Quality: High Quality Price: Competitive Price Export Markets: Global Product Description 1. Description: FOX® -8H (liquid) and 8HP (powder) is a high performance 100% poly-carboxylate based polymer, specifically developed as an effective dispersant, fluidifier and high range water reducing agent for concrete and other mineral materials. 8H (8HP) is a neutral concentrate grade; It is mainly used as a raw material to produce different types of high performance water reducers for targeted industrials. 2. Special Features: 8H (8HP) performs water-reducing effect, categorized as ASTM Type A admixture with superior benefits from the technology and the quality: -Very effective dispersing power, largely reduces required dosage -Good stability, producing extended slump life -Homogeneous plasticizing property with a unique cohesive characteristic, thus preventing segregation and bleeding -Promotes usage of higher dosage or volume of cementitious supplementary materials such as silica fume, fly ash and blast furnace slag. -Versatile disperser for various types of cement and minerals including gypsum, ceramic, ion-oxide pigment. 3. Uses 8H (8HP) is mainly used as a major ingredient to produce a high performance water reducers or plasticizers for the following applications -High performance concrete -Precasting -Self-compacting concrete -Pumpable or flowable concrete -Concrete containing silica fume, fly ash or Blast furnace slag -Specially shaped concrete elements -Architectural concrete -Lightweight concrete 8H (8HP) can also be used as-is for above-mentioned applications. However, due to variations in chemical composites of cements and other materials used and for different application requirements, it is not suggested to use 8H (8HP) directly in concrete or other materials without evaluation. The optimal performance of 8H (8HP) in applications should be obtained through trial mixes and/or through formulation adjustments by the users. For precast products processed in elevated temperate such as steam curing, use Simon 600. For technical support, please contact FuClear technologies Inc. 4. Special notes Do not use 8H (8HP) with additives containing naphthalene sulfonate. Unreliable rheologic behaviours may be experienced. Do not use 8H (8HP) for temperature treated concrete or other materials. Use Simon 600. 5. Packaging Available in 200 kg (180 L/ 48 gal) drum and 1000 kg (893L/ 236gal) tank for 8H (liquid), and 25kg plastic bag for 8HP (powder form) 6. Storage 8H should be stored at temperature 5- 40C (40-104 F). When It freezes, full strength can be restored AFTER COMPLETE THAWING AND THOROUGH AGITATION. Keep container closed when it is not in use. Do not store the product directly under sunlight. 7. Shelf life The shelf life is twelve (12) months when it is packed with a new drum or tote tank. 8. Handling 8H (8HP) shows negligible toxic, hazardous, and corrosive. Comprehensive instructions are given in the Material Safety Data Sheet available from Fuclear sales offices. Package : plastic bag
Product Description This product is a water-soluble concrete admixture, major part of which is polycarboxylate polymer. It provides functions of high range water reduction, excellent slump retention, low shrinkage and high strength. It can be added to different strength grade concrete, especially for the concrete of high strength, self-compacting, high durability and performance. This product accords with GB8076-2008, JG/T233 first-class standards, and also satisfies the No. [2005]101 Specification of National Ministry of Railways. Benefits High range water reduction: 25~40% Set retarding function High slump retention and guaranteed slump range, small rate of slump loss The significant enhancement eff¬ect to concrete hardening Well workability, no segregation, no bleeding and high pumpability No chlorine, low alkalis Air content can be adjusted by project requirements Significant improvement in preventing freezing, segregation, carbonization and shrinkage, the life time of concrete is extended greatly Fields of Application All grades of pumping concrete and economical concrete for long-distance transport High strength concrete, owing concrete, self-compacting concrete, mass concrete, high performance concrete and clear water concrete structures All sorts of industrial and civil building projects, high-compressive-strength concrete structures, especially in large scale concrete structures, which require the high durability of concrete Produce large-scale prestressed concrete beam or board, and steam curing concrete etc. Physical properties Items Specification Appearance : Light yellow Solid content wt.% 45.0¡À1.0 Specific gravity (20¡æ) 1.16¡À0.01 pH value 7¡À1 Chloride content % ¡Ü0.01. 200kg P.E. drum or IBC Tank.
Product Description This product is a water-soluble concrete admixture, major part of which is polycarboxylate polymer. It provides functions of high range water reduction, excellent slump retention, low shrinkage and high strength. It can be added to different strength grade concrete, especially for the concrete of high strength, self-compacting, high durability and performance. This product accords with GB8076-2008, JG/T233 first-class standards, and also satisfies the No. [2005]101 Specification of National Ministry of Railways. Benefits High range water reduction: 25~40% High slump retention and guaranteed slump range, small rate of slump loss The significant enhancement eff¬ect to concrete hardening Well workability, no segregation, no bleeding and high pumpability No chlorine, low alkalis Air content can be adjusted by project requirements Significant improvement in preventing freezing, segregation, carbonization and shrinkage, the life time of concrete is extended greatly . Fields of Application All grades of pumping concrete and economical concrete for long-distance transport High strength concrete, owing concrete, self-compacting concrete, mass concrete, high performance concrete and clear water concrete structures All sorts of industrial and civil building projects, high-compressive-strength concrete structures, especially in large scale concrete structures, which require the high durability of concrete Produce large-scale prestressed concrete beam or board, and steam curing concrete etc. Physical properties Items Specification Appearance Red Solid content wt.% 40.0¡À1.0 Specific gravity (20¡æ) 1.11¡À0.01 pH value 7¡À1 Chloride content % ¡Ü0.01. Dosage Dosage: 0.6~1.2% of total cementitious materials. Increase dosage to 1.0~2.0% when manufacture the high-compressive-strength concrete. The optimum mix design needs to be determined by the requirements of the project, specialties of materials and mixture tests before usage. Can not be mixed with naphthalene-based admixture; the compatibility of combination with other admixtures needs to be conformed by mix tests. The factors, which include the amount of mud in sand and grave, the variation of admixture quality, can a¬ffect water reducing performance of this product in a big range. 200kg P.E. drum or IBC Tank.
Product Description This product is a water-soluble polycarboxylate plastic retaining agent, which can prohibit slump loss of concrete. It is capable to mix with other polycarboxylate superplasticizers. This product accords with GB8076-2008, JG/T233 fi¬rst-class standards, and also satisfi¬es the No. [2005]101 Speci¬cation of National Ministry of Railways. Benefits : High plastic retaining performance, slump loss of concrete is control between 80~90% High liquidity and guaranteed slump range, small rate of slump loss after mixing with PCA superplasticizers. The signi¬ficant enhancement effect to concrete hardening Well workability, no segregation, no bleeding and high pumpability No chlorine, low alkalis Air content can be adjusted by project requirements Signi¬ficant improvement in preventing freezing, segregation, carbonization and shrinkage, the life time of concrete is extended greatly. Fields of Application All grades of pumping concrete and economical concrete for long-distance transport High strength concrete, owing concrete, self-compacting concrete, mass concrete, high performance concrete and clear water concrete structures. All sorts of industrial and civil building projects, high-compressive-strength concrete structures, especially in large scale concrete structures, which require the high durability of concrete. Produce large-scale prestressed concrete beam or board, and steam curing concrete etc. Physical properties Items Specification Appearance Light yellow Solid content wt.% 45.0¡À1.0 Specific gravity (20¡æ) 1.10¡À0.01 pH value 7¡À1 Chloride content % ¡Ü0.01. Dosage Mix with PCA superplasticizers following the proportions of 3:7, 4:6 or 5:5. Can not be mixed with naphthalene-based admixture; the compatibility of combination with other admixtures needs to be conformed by mix tests. The factors, which include the amount of mud in sand and grave, the variation of admixture quality, can a¬ffect water reducing performance of this product in a big range. 200kg P.E. drum or IBC Tank
HW-2 series Polycarboxylate superplasticizer is one of the west generation highly effective water reducer of our corporation, the technology is original creation, and the synthetical function is excellent. It is can produce different strength grade of the concrete and is prepare normal concrete ideally admixture. HW-2 series Polycarboxylate superplasticizer is use in self-compacting concrete,high performance concrete and dry-mixed mortar.Ití»s technical-economical performances unattainable in the past.
Appearance: Powder: white(98%) Liquid:white or yellow(40%) Water Content(Power)(%) ¡¨¹3.0 PH Value(20¡æ)(20% Liquid) 6.0~8.0 Air Content(%) ¡¨¹5.0 Concrete Water Reduction Ratio(%) ¡Y26.0 (25%-35%) Dosage Recommendation(%) In relation to weight of binder Power:0.16~0.3% total cementitious material powder--woven bag, 25kg/bag. solution--drum, 950kg/drum.
Polycarboxylate Superplasticizer is the newest generation superplasticizer used for concrete in domestic and abroad.It is based on molecular designs and adsorption capacity of polycarboxylate,we do R&D and successfully produce water reducing and retention type polycarboxylate superplasticizer for concrete.With initiating systerm and reaction conditions,we achieve high adaptability.Comparing with PNS and other superplasticizer, superplasticizer has many characteristic advantages in technology and performance as following: (1) low dosage, high rate of water reducing; (2) keep concrete good slumption retention; (3) good compatibility with cement; (4) small shrinkage of concrete to keep the stability of volume and durability; (5) environmental in production and usage. Base on above advantages.
Polycarboxylate Based Superplasticizer is the third generation concrete plasticizer which advance developed from lignosulfonate calcium type and naphthalene type plasticizer. Polycarboxylate is the latest liquid type superplasticizer with slump retention performace developed from superplasticizer. Polycarboxylate is a modify liquid type superplasticizer researched by new technology.it is a greeen environmental product with good comprehensive index and no pollution.
Is a high-performance polycarboxylate superplasticizer developed by HUAXUAN HIGH TECHNOLOGY to meet the needs of different concrete slump protection. This series of water reducers have excellent slump retention and extremely high water reduction rate through molecular structure optimization design, which greatly improves the plastic index of fresh concrete and improves its pumping and construction properties. At the same time, the strength growth and structural development of hardened concrete have also been significantly improved. The product has a low content and strong adaptability to various concrete raw materials, and it can meet various requirements for concrete slump protection under pumping, medium and low slump, long-term transportation, and high-temperature construction conditions. By adding HUAXUAN HIGH TECHNOLOGY�® KH-206 can obtain the following results: (1) Excellent slump retention: within a certain period of time, the fluidity increases by time, till it increases to the maximum value. (2) Ultra-high water reduction rate: the water reduction rate is as high as 40% or more; (3) The concrete has good mobility, easy pouring, and easy construction; (4) Good workability: no segregation and no bleeding, which is conducive to concrete strength growth and structural development. (5) Wide adaptability: adapt to various cements and admixtures. Appearance:light yellow liquid Solid content:50% Application: It is suitable for concrete with high requirements for slump retention, such as large-volume concrete, long-distance conveying concrete and pumping concrete. It is especially suitable for maintaining concrete slump under long-term transportation and high-temperature construction conditions,also it is suitable for various Water conservancy, marine engineering, ports, transportation, electric power and other national key projects that require high concrete performance,especially recommended for high-strength high-performance concrete, super-fluid, earthquake-free and self-compacting concrete. How to use: It is recommended to be used in combination with other water-reducing polycarboxylic acid water-reducing agent mother liquor. The ratio of water-reducing mother liquor to slump-preserving mother liquor is better to be (90%-50%): (10%-50%), and the solid content after compounding should be 0.05%~0.25% of the cementitious material.After being diluted in proportion, add it to the concrete mixer together with water,and youâ??ll see better effects when adding retarder of 1-4% of the quality of the water reducing agent. If you are interested in our company's products, you can contact us, the following is our contact information:
HUAXUAN HIGH TECHNOLOGY�® KH-204 Is a new version high-performance polycarboxylic superplasticizer. Compared with other high efficiency water-reducing agents,it has the properties of ultra-high water reduction,low shrinkage,low bleeding rate and small avalanche loss. Ultra-high water reducing rate:up to 40%,particularly significant in high-grade concrete (above C50).In the same condition,it costs less material to get the same effect. Excellent plastic retention: Excellent plastic retention performance: Because the steric hindrance of the extended polymer side chain effectively hinders the secondary agglomeration between cement particles, the product has high dispersion and can maintain this performance for a long time. Good early strength and strengthening effect: under the same conditions, the concrete mixed with this product has a higher early strength and strengthening effect than other types of superplasticizers. Significantly improve the durability of concrete: The product has a low alkali content, and because itâ??s an air-entraining type high efficiency water reducing agent, it significantly reduces the alkali-aggregate reaction of concrete and improves the freeze-thaw resistance of concrete. Stability: The concrete shrinkage and creep properties will be effectively improved after adding the product,in the meanwhile, it gains a good stability, so there are lower risks of cracks.
PCE superplasticizer is the newest generation superplasticizer used for concrete in domestic and abroad.It is based on molecular designs and adsorption capacity of polycarboxylate,we do R&D and successfully produce water reducing and retention type polycarboxylate superplasticizer for concrete.With initiating systerm and reaction conditions,we achieve high adaptability. Polycarboxylate Superplasticzier we produce types as below: 1. High water reducing type (normally they can be satisfied for concretes' requirements): JH03 basic standard type(under most exported.) JH09 viscosity adjustment is better than JH03,water reducing ratio is lower than JH03,(suitable for high clay content ratio of cement,under most exported.) JH15 water reducing ratio is higher than JH03,performance is better than JH03,suitable for high strength concrete.(New Research and technology higher than JH03.) 2. Water reducing and slump retention type JH02 water reducing and slump retention type.(New Research on base of JH03.) 3. High slump retention type JH06 basic standard type,mix with JH03 and JH09 if concrete's slump retention is not satisfied.(under most exported.) JH06K higher slump retention performance than JH06,price is higher than JH06,mixing with JH03 and JH09 if concrete's slump retention is not satisfied.(under most exported.) JH16 Better performance and different technology with JH06 and JH06K,mixing with JH03,JH09 and JH15 if concrete's slump retention is not satisfied.(New Research and technology to satisfy JH15.) Exporting loading: 20'GP container loading: 1. 220kg/drum, 80 drums 17.6 T 2. 1150kg/drum,20 drums 23 T 3. 20-25tons/flexitank. 20-25 T
YL-PL-WR Polycarboxylate Superplasticizer (Water reducing type, 40-50% solid content) * High water reduction, low dosage. The water reducing rate can reach 20%-40% with recommended dosage. * Early and high strength. The early strengthand 28 day strength have been obviously improved. * Low slump loss: complywith the pumping agent standard, slump loss would besignificantly reduced. * High durability: This product can effectively reduce the W/C ratio, improve durability. * It can be used as a mother liquor to produce other functional admixture, such as early strengthtype, retarder, pumpingconcrete admixture, antifreezer, etc.; * Environmentalfriendly products: the production does not pollute the environment; * Non-corrosionon steelbar.
Description Polycarboxylate Superplasticizer concrete admixture (Powder) is a high performance, 100% poly-carboxylate based polymer, also named PCE. Polycarboxylate Superplasticizer concrete admixture (Powder) is specifically developed as an effective dispersant, fluidifier and high range water reducing agent for concrete and other mineral materials, which is air entraining. It complies with ASTM C 494, Type F specifications. Application As a new generation of environmental friendly concrete admixtures, Polycarboxylate Superplasticizer concrete admixture (Powder) can be applied in hydraulic, electricity, port, bridge, railway, tunnels and highway projects. In the production of self-compact precast concrete and conventional concrete, Polycarboxylate Superplasticizer concrete admixture (Powder) leads to low water/cement ratios, but maintains a normal level of workability. Features and Benefits Polycarboxylate Superplasticizer concrete admixture (Powder) has the same technical specifications with PC-L while remarkably reducing the cost of package and transportation. 2. Polycarboxylate Superplasticizer concrete admixture (Powder) is much easier to be handled in storage and transportation compared with PC-L. 3. Excellent compatibility with various types of cements. 4. High Water Reducing Rate: Low dosage, and low slump loss. Low chloride and alkali content, no corrosion to steel-bar. 6. High Stability: Neither precipitation nor layers at low temperature. 7. Environmental Friendly: Free from formaldehyde and nontoxic. Uses and Dosages 1. When Polycarboxylate Superplasticizer concrete admixture (Powder) is applied in the form of powder, normal dosage ranges from 0.15% to 0.6% of the weight of cementitious material in 1m3 of concrete. When applied in the form of liquid by being mixed with and dissolved into water, Polycarboxylate Superplasticizer concrete admixture (Powder) can be changed into liquid of which density varies from 10% to 40%. In order to optimize the dosage, experiments are required before the adoption of it or changing of the cement type. 2. Recommended dosage: 0.2% of the weight of cementitious material in 1m3 of concrete. 3. Polycarboxylate Superplasticizer concrete admixture (Powder) can be added into cement paste together with water or after mixing, while the latter approach is preferred. 4. The quantity of water must be strictly controlled when Polycarboxylate Superplasticizer concrete admixture (Powder) is applied, since slump loss of concrete is closely related to it. 5. Polycarboxylate Superplasticizer concrete admixture (Powder) is alkalescent, nontoxic, non-corrosive and environmental friendly. If it gets onto skin or in the eyes, please wash it off with clean water at once. If there is skin allergy, please see a doctor. 6. Do not mix it with naphthalene-based admixtures. If other admixtures, such as set retarder or corrosion-inhibiting admixture, are required simultaneously for some special projects, compatibility tests should be conducted beforehand. 7. When applying Polycarboxylate Superplasticizer concrete admixture (Powder) in steam curing concrete or other special concrete, abundant experiments are highly recommended to make sure it satisfies the expected requirement. 8. When Polycarboxylate Superplasticizer concrete admixture (Powder) is used to make concrete at or below C45, the total cost may be reduced by increasing the quantity of minerals. Package, Storage & Handling 1. Polycarboxylate Superplasticizer concrete admixture (Powder) for powder: Woven fabric bag with plastic liner. Net weight: 20kg +/- 0.13 kg. 2. Polycarboxylate Superplasticizer concrete admixture (Powder) needs to be stored in well-ventilated and dry place. 3. Keep Polycarboxylate Superplasticizer concrete admixture (Powder) from sunlight and below freezing point. Its storage stability can retain 12months in original package, but please use it up in 60days if it's been opened and repacked. 20kg/bag, 12 tons loaded in a 20ft.
Description Polycarboxylate Superplasticizer concrete admixture (40%) is a high performance, 100% poly-carboxylate based polymer, also named PCE. Polycarboxylate Superplasticizer concrete admixture (40%) is specifically developed as an effective dispersant, fluidifier and high range water reducing agent for concrete and other mineral materials, which is air entraining. It complies with ASTM C 494, Type F specifications. Application (1)As a new generation of environmental friendly concrete admixtures, Polycarboxylate Superplasticizer concrete admixture (40%) can be applied in hydraulic, electricity, port, bridge, railway, tunnels and highway. (2) In the production of self-compact precast concrete and conventional concrete, Polycarboxylate Superplasticizer concrete admixture (40%) leads to low water/cement ratios, but maintains a normal level of workability. Features and Benefits 1. Excellent compatibility with various types of cements. 2. High Water Reducing Rate: Low dosage, and low slump loss. 3Low chloride and alkali content, no corrosion to steel-bar. 4. High Stability: Neither precipitation nor layers at low temperature. 5. Environmental Friendly: Free from formaldehyde and nontoxic. Uses and Dosages 1.When Polycarboxylate Superplasticizer concrete admixture (40%) is applied, the dosage normally ranges from 0.3% to 1.2% of the weight of cementitious material in 1m3 of concrete. In order to optimize the dosage, experiments are required before the adoption of it or changing of the cement type. 2.Recommended dosage: 0.4% of the weight of cementitious material in 1m3 of concrete.When applied in ready-mixed station, it should be diluted into solution with the concentration of 10% and the recommended dosage. 3.Polycarboxylate Superplasticizer concrete admixture (40%) can be added into cement paste together with water or after mixing, while the latter approach is preferred. 4.Polycarboxylate Superplasticizer concrete admixture (40%) is alkalescent, nontoxic, non-corrosive and environmental friendly. If it gets onto skin or in the eyes, please wash it off with clean water at once. If there is skin allergy, please see a doctor. 5.Do not mix it with naphthalene-based admixtures. If other admixtures, such as set retarder or corrosion-inhibiting admixture, are required simultaneously for some special projects, compatibility tests should be conducted beforehand. 6.The quantity of water must be strictly controlled when Polycarboxylate Superplasticizer concrete admixture (40%) is applied, since slump loss of concrete is closely related to it. 7.When applying Polycarboxylate Superplasticizer concrete admixture (40%) in steam curing concrete or other special concrete, abundant experiments are highly recommended to make sure it satisfies the expected requirement. 8.When Polycarboxylate Superplasticizer concrete admixture (40%) is used to make concrete at or below C45, the total cost may be reduced by increasing the quantity of minerals. Package, Storage & Handling 1.Polycarboxylate Superplasticizer concrete admixture (40%) for liquid: It is packed in 1100kg (1000Liter) per IBC Tank. 2. Store it in covered containers and keep it from rain, sundry, and evaporation. 3. Keep Polycarboxylate Superplasticizer concrete admixture (40%) from sunlight and below freezing point. Its storage stability can retain 12months in original package, but please use it up in 60days if it been opened and repacked. 1.16 tons/IBC tank, 20.88 tons loaded in a 20ft.
Description Polycarboxylate Superplasticizer concrete admixture (50%) is a high performance, 100% poly-carboxylate based polymer, also named PCE. Polycarboxylate Superplasticizer concrete admixture (50%) is specifically developed as an effective dispersant, fluidifier and high range water reducing agent for concrete and other mineral materials, which is air entraining. It complies with ASTM C 494, Type F specifications. Application (1) As a new generation of environmental friendly concrete admixtures, Polycarboxylate Superplasticizer concrete admixture (50%) can be applied in hydraulic, electricity, port, bridge, railway, tunnels and highway. (2) In the production of self-compact precast concrete and conventional concrete, Polycarboxylate Superplasticizer concrete admixture (50%) leads to low water/cement ratios, but maintains a normal level of workability. Features and Benefits 1. Excellent compatibility with various types of cements. 2. High Water Reducing Rate: Low dosage, and low slump loss. 3Low chloride and alkali content, no corrosion to steel-bar. 4. High Stability: Neither precipitation nor layers at low temperature. 5. Environmental Friendly: Free from formaldehyde and nontoxic. Uses and Dosages 1. When Polycarboxylate Superplasticizer concrete admixture (50%) is applied, the dosage normally ranges from 0.3% to 1.2% of the weight of cementitious material in 1m3 of concrete. In order to optimize the dosage, experiments are required before the adoption of it or changing of the cement type. 2. Recommended dosage: 0.4% of the weight of cementitious material in 1m3 of concrete. When applied in ready-mixed station, it should be diluted into solution with the concentration of 10% and the recommended dosage thereafter is 2% of the weight of cementitious materials. For example, 100kg of Polycarboxylate Superplasticizer concrete admixture (50%) (50% concentration) can be mixed with 400kg of water to make solution of 10% concentration. 3. Polycarboxylate Superplasticizer concrete admixture (50%) can be added into cement paste together with water or after mixing, while the latter approach is preferred. 4. Polycarboxylate Superplasticizer concrete admixture (50%) is alkalescent, nontoxic, non-corrosive and environmental friendly. If it gets onto skin or in the eyes, please wash it off with clean water at once. If there is skin allergy, please see a doctor. 5. Do not mix it with naphthalene-based admixtures. If other admixtures, such as set retarder or corrosion-inhibiting admixture, are required simultaneously for some special projects, compatibility tests should be conducted beforehand. 6. The quantity of water must be strictly controlled when Polycarboxylate Superplasticizer concrete admixture (50%) is applied, since slump loss of concrete is closely related to it. 7. When applying Polycarboxylate Superplasticizer concrete admixture (50%) in steam curing concrete or other special concrete, abundant experiments are highly recommended to make sure it satisfies the expected requirement. 8. When Polycarboxylate Superplasticizer concrete admixture (50%) is used to make concrete at or below C45, the total cost may be reduced by increasing the quantity of minerals. Package, Storage & Handling 1. Polycarboxylate Superplasticizer concrete admixture (50%) for liquid: It is packed in 12000kg (1000Liter) per IBC Tank. 2. Store Polycarboxylate Superplasticizer concrete admixture (50%) in covered containers and keep it from rain, sundry, and evaporation. 3. Keep Polycarboxylate Superplasticizer concrete admixture (50%) from sunlight and below freezing point. Its storage stability can retain 12months in original package, but please use it up in 60days if it's been opened and repacked. 1.16 tons/IBC tank, 20.88 tons loaded in a 20ft.
Ms Emily +8615898752659 Our innovative PCE Polycarboxylate Superplasticizer stands at the forefront of concrete technology, revolutionizing both domestic and international markets. This advanced superplasticizer is meticulously engineered based on sophisticated molecular designs and exceptional adsorption capacity of polycarboxylate, offering a groundbreaking water-reducing and retention solution for concrete applications. Our Service Offerings: We provide extensive technical support including guidance on concrete air content, distinctions between polycarboxylate ether and ester, and the integration of other admixtures with PCE. Additionally, we assist in fine-tuning test results based on your specific raw material data. Evolution of Concrete Water Reducing Admixtures: First Generation: Lignosulfonate types (Na, Mg, Ca). Second Generation: Naphthalene sulfonate, Sulfonated melamine formaldehyde, aliphatic series, and aminosulfonic acid series. Third Generation: Polycarboxylate-based superplasticizer, representing the pinnacle of water-reducing technology.
