Applicable fibers SM MM DS NZDS Fiber cleaved length 8-16mm (Coating diameter: 250¦Ìm) Fiber diameter Cladding diameter: 80-150¦Ìm Coating diameter: 100-1000¦Ìm Fiber Count Single Splicing mode Auto Calibrate Normal Special Fiber aligning method Core aligning¡¢clad aligning¡¢manual aligning Image processing method Digital Actual average splice loss 0.02dB(SM), 0.01dB(MM), 0.04dB(DS), 0.04dB(NZDS) Typical splicing time 9 sec (standard SM fiber) Splicing mode 53(templet), 40(user) Splice loss estimate More accurate Return loss £¾60dB Storage of splice result 4000 results, 20 parameter per result Fiber magnification 300X (X or Y view) 150X (X and Y view) Tube typical heating time 30 sec Tube heating mode 9(templet), 24(user) Tube heating temperature Adjustable Applicable protection sleeve length 60mm, 40mm and a series of micro sleeves Tension test 2N Electrode life 2500 No. of splice/heating with battery Typical 160 cycles (splice/tube heat with inner Li-battery) Display screen 5.6 inch TFT color LCD monitor Image change over The fiber image can be turned upside down Terminal USB 1.1 and VGA Operating condition 0-5000m above sea level,0-95%RH and -10-50¡ãrespectively, Max wind velocity of 15m/s Power supply AC 100-240V with AC adapter inner Li-battery (6600mAH) Dimension 150mm(L)¡Á150mm(W)¡Á150mm(H) Weight 2.7Kg excluding battery, 3.2Kg including battery. Plastic bag outside,strong foams inside.
Features Core to core alignment by pas technology ( pas:profile alignment system) Digital fusion splicer with automatic focus function Fiber core can be display clearly Single x or y view and x & y view simultaneously Auto detect cleaved endface fault Display fiber cleaved and offset angle Display core and clad offset 5.6 inch tft color lcd monitor with clear digital image display Usb & vga interface Software upgrade via usb interface Specifications Model Kl-300t Applicable fibersSm(itu-t g.652), mm(itu-t g.651), ds(itu-t g.653), nzds(itu-t g.655) Fiber cleaved length8~16mm(coating diameter: 250µm) 16mm(coating diameter: 250 ~ 1000µm) Fiber diameterCladding diameter:80 ~150µm coating diameter:100~ 1000¦ìm Fiber countSingle Fiber aligning methodCore or clad aligning Image processing methodDigital Actual average splice loss0.02db(sm), 0.01db(mm), 0.04db(ds), 0.04db(nzds) Splicing timeTypical 9 sec, with standard sm fiber Splicing mode53(templet), 40(user) Splice loss estimateMore accurate Return loss>60db Storage of splice result4000 results, 20 parameter per result Fiber display and magnification300x(x or y view), 150x(x and y view) Tube heating timeTypical 30 sec Tube heating mode9(templet), 24(user) Tube heating temperatureCan be adjusted Applicable protection sleeve length60mm, 40mm and a series of micro sleeves Tension test2n Electrode life2500 No.Of splice/heating with batteryTypical 150 cycles (splice/tube heat) with inner li-battery Display screen5.6 tft inch color lcd monitor Image change overThe fiber image is turned upside down TerminalsUsb 1.1 and vga Operating condition0 ~ 5000m above sea level, 0 ~ 95%rh and -10¡«50¡æ, respectively, max. Wind velocity of 15m/s Power supplyAc 100-240v with ac adapter inner li-battery(6600mah) Dimensions150mm(l) x150mm (w) x150mm (h) Weight2.7 kg excluding battery, 3.2 kg including battery.
Features Fiber core can be display clearly Single x or y view and x & y view simultaneously Auto check quality of , cleaved end face Auto select best splicing program 9 seconds splice time and 30 seconds heat time Small bulk and light weigh 5 inch color lcd monitor with clear digital image display Simple operation menu Specifications ModelKl-280 Applicable fibersSm(itu-t g.652), mm(itu-t g.651), ds(itu-t g.653), nzds(itu-t g.655) Fiber cleaved length8~16mm(coating diameter: 250µ,m) 16mm(coating diameter: 250 ~ 1000µ,m) Fiber diameterCladding diameter: 80 ~150µ,m coating diameter: 100~ 1000¦ìm Fiber countSingle Fiber aligning method Core , aligning Return loss>60db Actual average splice loss0.02db(sm), 0.01db(mm), 0.04db(ds), 0.04db(nzds) Splicing modeAuto Splicing mode12(templet), 188(user) Typical splicing timeTypical 9 sec, with standard sm fiber Protection sleeve length60mm, 40mm and a series of micro sleeves Storage of splice result5000 results, 3 parameter per result Tension test2n Fiber display and magnification400x(x or y view), 200x(x and y view) Tube heating timeTypical 30 sec Electrode life2500 No.Of splice/heating with batteryTypical 130 cycles (splice/tube heat) with inner li-battery Display screen5 inch color lcd monitor Image change overThe fiber image is turned upside down TerminalsRs 232 Operating condition0 ~ 5000m above sea level, 0 ~ 95%rh and -10 50c, respectively, max. Wind velocity of 15m/s Power supplyAc 100-240v with ac adapter,inner li-battery(6600mah) Dimensions150mm(l) x150mm (w) x160mm (h) Weight3.52 kg including battery.
Applicable fibers SM MM DS NZDS Fiber cleaved length 8-16mm Fiber diameter Cladding diameter: 80-150¦Ìm;Coating diameter:100-1000¦Ìm Fiber Count Single Fiber aligning method Core aligning Return loss £¾60dB Actual average splice loss 0.02dB(SM), 0.01dB(MM), 0.04dB(DS), 0.04dB(NZDS) Splicing mode Auto Typical splicing time 9 sec, with standard SM fiber Splicing mode 12 (templet), 188(user) Tube typical heating time 30 sec Protection sleeve length 60mm, 40mm Storage of splice result 5000 results, 3 parameter per result Tension test 2N Fiber magnification 400X (X or Y view), 200X (X and Y view) Electrode life 2500 No. of splice/heating with battery Typical 130 cycles Image change over The fiber image can be turned over Display screen 5 inch color LCD monitor Terminal RS232 Power supply AC 100-240V with AC adapter inner Li-battery (6600mAH) Operating condition 0-5000m above sea level, -10-50¡ã Max wind velocity of 15m/s Dimension 150mm(L)¡Á150mm(W)¡Á160mm(H) Weight 3.52Kg including battery. Plastic bag outside,strong foams inside.
It adopts advanced pas fiber adustment technology . Adopt four motors drive, have fiber Adjustment function, it is not only used for fttx project, but also can be used for the trunk Line, it is a machine which is the smallest volume , the lightest weight , the most fast splicing Speed Weight 1.54kg (without battery), 1.82kg (including Battery), including attachments packing gross Weight: 5.38kg Size 150d¡¨¢130w¡¨¢126h(mm)
Fusion splicer of fitel S199M4, fitel S175V2000
Standard Configuration From Sumitomo a)TYPE-39 main body b)Battery charger Model:BU-66S C) AC adapter Model:PS-66 d)Battery Charge cord Cable Model: BCC-66 e)AC power cord Model: PC-AC2 f) Cooling Tray g)Spare electrodes Model: ER-10 h)Operation manual i)Carrying case j) High precision fiber cleaver Model: FC-6S k)Fiber Stripper Model: FO 103S. 10kg.
The Fujikura FSM-60S fusion splicer sets the standard for core alignment fusion splicing by incorporating a user-friendly interface with enhanced features to provide the most rugged and reliable fusion splicer in the market today. The new rugged construction adds improved reliability by resisting shock, dust, and rain, and can withstand a 30 drop test. 10kg.
It is high cost performance:high quality but low sale price.It's available for export worldwide. Features: *color lcd monitor & 256 magnification *compact & light weight *reversible monitor with control panel on each side *max. Wind velocity of 15m/s *8 sec.Splice time, 40 sec.Tube-heat time *simultaneous x and y views *large capacity internal battery *system test ensures the best working condition *user programmable *auto check fiber end face *auto calibrate parameters *store 8000 groups of splice results *multiple language options Specifications: Applicable fibers: Sm, mm, ds, nz-ds, edf; Cladding diameter:100 to 150um; Coating diameter:100 to 1000um; Fiber cleaved length:8~22mm (standard); Splicing mode:auto & manual; Average splice loss:0.02db(sm), 0.01db(mm), 0.04db(ds), 0.04db(nzds); Return loss:í² 60db; Environment conditions:-25~50íµ(operation temperature), 0~95%rh (humidity), 0~5000m (altitude); Storage environment:-40~80íµ(temperature), 0~95úÑrh (humidity); Protection sleeve length:20mm, 40mm, 60mm; Tension test:2.0n (standard); Language: english, chinese, korea, russian, spanish etc; Interface:rs232 interface & video output;ac adaptor:85í½260v input voltage; Power supply:internal battery:12v voltage, 10ah, up to 200 times of continuous splices and heats; dc adaptor: 12v voltageú¼optional multipurpose external battery; Dimensions:170(w)íß140(h)íß170(d) mm; Weight:3.3kg Standard carton
Fusion splicer
Dvp- 730 single fiber fusion splicer Features Color lcd monitor & 256 magnification Compact & light weight Reversible monitor with control panel on each side Max. Wind velocity of 15m/s. 8 sec. Splice time, 40 sec. Tube-heat time Simultaneous x and y views Large capacity internal battery System test ensures the best working condition User programmable Auto check fiber end face Auto calibrate parameters Store 8000 groups of splice results Multiple language options Specifications Applicable fibers smíómmíódsíónz-dsíóedf Cladding diameter 100 to 150um Coating diameter 100 to 1000um Fiber cleaved length 16mm (standard) Splicing mode auto & manual Average splice loss 0.02db(sm)íó0.01db(mm)íó0.04db(ds)íó0.04db(nzds) Return loss í² 60db Environment conditions -25í½ú½50íµ (operation temperature), 0í½95%rh (humidity), 0í½4000m (altitude) Storage environment -40í½ +80íµ (temperature) , 0í½95úÑrh (humidity) Protection sleeve length 20mm íó40mm íó60mm Tension test 2.0n (standard) Language english, chinese, korean, russian, spanish etc. Interface rs232 interface & video output Power supply ac adaptorú¦ 85í½260v input voltage Internal batteryú¦12v voltage, 10ah, up to 150 times of continuous splices and heats Dc adaptorú¦12v voltageú¼optional multipurpose external battery Dimensions 170ú¿wú¬íß140ú¿hú¬íß170ú¿dú¬mm Weight 3.3kg Standard carton
Fusion splicer Fully automatic core alignment with 9 second splice time for sm fiber!reduced splice protector shrink time , now only 35seconds!extremely compact and lightweight , just 2.8kg!automatic fiber type identification
Product name 62S Plus Fusion Splicer Model No. 62S Plus+ WITH CT-08 Dimensions 46 W x 159 D x 150 H (mm) Cladding Diameter 80 to 150 microm Power Supply 100 to 240 V AC Wind Protection Maximum wind velocity of 15 m/s (34 mph) Weight 2.5 Kg Coating Diameter 100 to 1000 microm Fiber Cleave Length 5 to 16 mm Splicing Modes 100 preset and user programmable modes Product Keywords Traditional Core Alignment with the 62S+ Fiber Splicer
Splicing Type SM, MM, DS, NZDS Splicing Loss 0.02dB(SM) 0.01dB(MM) 0.04dB(DS) 0.04dB(NZDS) Return Loss >60dB Splicing Mode Manual, Half Auto, Auto Fiber Alignment Core to Core Alignment by PAS technology Applicable Fiber Cable indoor and 0.25mm,0.9mm fiber, SOC connector(option) Splicing Time 9s Heat Time 30s Auto Heat Cleaved Length 8-16mm Fiber Image/ Magnification 300/150 times View Display 4.3 inch digital high-quality LCD screen Tension Test Standard 2N (option) Heat Shrinkable Sleeve 60mm, 40mm and serials heat Shrinkable Sleeve Battery Capacity 300 cycles splicing and heating, 3 hours charging time ( splicing and charging at same time)" Battery Life Cycling charge 300-500 times, easy to replace battery Electrodes Life 3000 splicing, easy to replace electrodes Power Source 20W Interface USB Convenient data download and software update Construction Lighting Built in high brightness, wide range of lights, easy to operate at night Power supply Built in lithium battery 5200mAh 11.1V; external adapter, input: AC100-240V, output: DC13.5V/4.5A" Operating Condition 0-5000m above sea level, Temperature: -10-60, Humidity 0 95%RH (No dew)" Weight 1.7 KG (including battery) Dimension (LxWxH) 150mm(L) 135mm(W) 142mm(H)
1)Suitable for 0.25mm bare fiber, 0.9mm buffered fiber, Splice on Connector, Flat FTTH Fiber Cable(Drop Cable),Clamp Change Free(The First, Unique in the world) 2) Button and Menu is same as FSM-60S, in accord with the habit of usage 3) One Step Fiber Cleaver with Automatic Blade Rotation(The First, Unique in China)
Fusion Splicer TCW-605E of Techwin for construction and maintenance of fiber and cable We will try our best to provide products similar to Fujikura Fusion Splicer, Sumitomo Fusion Splicer, FITEL Fusion Splicer, INNO Fusion Splicer, ILSINTECH Fusion Splicer, FiberFox Fusion Splicer. How About This Product? The TCW-605E Series adopt high-speed image processing technology and special precision- positioning technology, automatically finish the whole process of fiber fusion in 8 seconds typically, TFT LCD monitor displays all steps of fiber fusion clear at a glance. The Uses: 1.The TCW605E Series Fusion Splicer have been using in English, Spanish, Portuguese, French, Italian, German, Arabic, Russian, Korea, Japanese, etc. 2.Widely used for SM and MM Quartz Fiber with diameter 80-150m(300m optional), coating layer diameter 0.1-1.0mm and bare fiber length 16mm more or less. 3.Ideal tools for construction and maintenance of fiber and cable in both field and laboratory applications. Detailed Introduction: 1.Not only a Fusion Splicer, but also your partner who make your job easy and happy 2.5.0 inch TFT color LCD monitor with anti-reflective coating 3.The advanced core to core fiber profile alignment system(PAS) 4.ARC Calibration FREE system. ARC Calibration sub-menu included in the Menu too, can do the ARC Calibration by Manual when necessary Technical Specifications: 1.Average Splicing Loss : 0.02dB with G.652 and G.657, 0.01dB with G.651 and 0.04dB with G.653 and G.655 2.Splicing Time : Typical splicing time:8s 3.Heating Time : Typical heating time:30s 4.Return Loss : 60dB or greater 5.Fiber Coating : 100m to 1000m 6.Fiber Cladding : 80m to 150m(300m optional)
Fusion splicer is used for joining two optical fibers end-to-end using heat, to fuse the two fibers together in such a way that light passing through the fibers is not scattered or reflected back by the splice and so that the splice and the region surrounding it are almost as strong as the virgin fiber itself. We has been dedicated to R & D, manufacturing fusion splicer from 2010, and successfully obtained 5 patents for the fusion slicer research. Uniway UW-65H is our latest developed product. It is more concise and smaller in size and has obtained 2 patents for its new technologies. Specification Applicable Fibers: SM, MM, NZ-DS, EDF, Pigtail, Cable (rubber-insulated wire), SC/LC/FC connector (optional function) Average Splice: Loss 0.02dB(SM), 0.01dB(MM), 0.04dB(NZDS), 0.04dB(EDF) Return Loss: â?¥60dB Tension Test: 2.0N(200gf)(Standard) Typical splicing time: 10 seconds Typical heating time: 30 seconds Splicing Program: 50 groups Protection Sleeve: 20mm, 40mm, 60mm Operating Language: English Operating Conditions: -10~+50�°C(operation temperature),0~95% RH(humidity), 0~5000m(altitude) Electrode Life; More than 3500 splices Power Supply: AC adaptor: 100~240V input voltage, 50/60Hz; 12V, 5A output voltage(DC) Inner lithium battery: 11.1V, 6AH for up to 200 splices with heating Monitor: 5 inches high resolution colorful LCD display Fiber Image: X or Y axis Separately views 400 times magnification, or Simultaneously 300 times Storage of Splice Result 6,000 groups of latest splice results Splicing Model: Auto & Manual &Full Auto Dimensions: 130(W)*135(D)*130(H)mm; Package size: 53*32*30cm Weight: 2.21kg+0.37kg (battery weight)=2.58kg; Package G.W.: 8.68kg
DecFuse DEC36 Fusion Splicer -Equal to Fujikura 60s, Sumitomo 39 -CE -8s splicing -Fiber cleaver included -Type:Optical Fiber Fusion Splicing Machine Features -High-resolution true color 5.7 inch LCD display -advanced core to core fiber profile alignment system(PAS) -Real time calibrating system ,parameter neednt be adjusted -X/Y axes were displayed meanwhile, Magnification up to 304 times -8 seconds splicing time, 30 seconds Heat-Shrinking -Battery capacity was display in real time, precisely -Built-in high capacity battery, support 220 times splicing and heating, to meet one days work -Long Electrode Lifetime, up to 4000 times -The new wind-cover design, enhance the ability to prevent the dust & wind, Max. wind velocity of 15m/s -Three Splicing modes: auto, half-auto, manual -Built-in super high-brightness LED supply convenience for night work -Auto calculate splicing loss -Small bulk and light weight, only 2.8kg include battery -4000 results Storage -USB data interface &VGA -One button operation to finish results download or software update -Close shield splice automatically, Close heater lid heat automatically -One year Warranty Why Purchase from us 1. Equal to Fujikura FSM-60s, Sumitomo Type-39 2. First Manufacture in China 3. Fastest splicing (8 second) in the world 4. One year warranty 5. 3 days delivery + low shipping cost by air Standard Export Carton. G.W/N.W: 8.0/7.0kg, L x W x H :465mmx350mmx360mm
SimSplice™ Digital Fusion Splicer T35 Fujikura FSM-50S AnalogueGet rid of complicated functions. Easy battle Description: The Fiber Splicing Machine T35 Series have a new fully-digital design, core to core alignment, Standard accessories. Multiple language menu, 5.0 inch digital high definition LCD display, 9 Sec. splice time, 35 Sec. Tube-heat time.. Features: • The advanced core to core fiber profile alignment system • X/Y axes were displayed meanwhile, Magnification up to 304 times • 9 Sec. splice time , 35 Sec. tube-heat time • Hig High-resolution true color 5.0 inch LCD display • Four display modes, fiber core visible • Store 6000 groups of splice results • Four display modes, fiber core visible • USB interface - for updates + result transfers • Built-in high capacity battery, support 220 times splicing and heating, to meet one days’ work • Long Electrode Lifetime, up to 4000 times • Three Splicing modes: auto, half-auto, manual • Close shield splice automatically, Close heater lid heat automatically • One year Warranty. Standard Package: • T35 Fusion Splicer • T30 High Precision Fiber Cleaver • Miller CFS-2 Fiber Coat Stripper • Internal Battery • Charger, AC Power Cord • Spare Electrodes (one pair) • Cooling Tray, Alcohol Pump Bottle, Blower Brush • User Manual • Carrying Case.
Fusion splicer pt-630 Features Fiber core can be display clearly Singlex or y view and x & y view simultaneously Auto check quality of cleaved end face Auto select best splicing program 9 seconds splice time and 30 seconds heat time Small bulk and light weigh 5 inch color lcd monitor with clear digital image display Simple operation menu Software upgrade via usb interface Specification Model Pt-630 Applicable fibers Sm (itu-t g.652), mm (itu-t g.651), ds (itu-t g.653), nzds (itu-t g.655) Fiber cleaved length 12~16mmú¿coating diameterú¦250ª8mú¬ 16mmú¿coating diameter: 250 ~ 1000ª8mú¬ Fiber diameter Cladding diameterú¦80 ~150ª8m Coating diameterú¦100~ 1000ª8m Fiber count Single Fiber aligning method Core aligning Image processing method Digital Actual average splice loss 0.02db ú¿smú¬, 0.01db (mm), 0.04db (ds), 0.04db( nzds) Splicing time Typical 9 secú¼with standard sm fiber Splicing mode 53(templet), 40(user) Splice loss estimate More accurate Return loss ú+60db Storage of splice result 5000 resultsú¼3 parameter per result Fiber display and magnification 400xú¿x or y viewú¬, 200xú¿x and y viewú¬ Tube heating time Typical 30 sec Tube heating mode 9(templet), 24(user) Tube heating temperature Can be adjusted Applicable protection sleeve length 60mm, 40mm and a series of micro sleeves Tension test 2n Electrode life 2500 No.Of splice/heating with battery Typical 130 cycles (splice/tube heat) with inner li-battery Display screen 5 inch color lcd monitor Image change over The fiber image is turned upside down Terminals Rs 232 Operating condition 0 ~ 5000m above sea level, 0 ~ 95%rh and -10í½50íµ, respectively, max. Wind velocity of 15m/s Power supply Ac 100-240v with ac adapter; inner li-battery(6600mah) Dimensions 150mm(l) x150mm (w) x150mm (h) Weight 2.7 kg excluding battery, 3.2 kg including battery
