Application: Distillation Azeotropic distillation (phase separation) in glass overhead (optional) Evaporation to any desired consistency Multi-component reactions Gas dispersion below liquid surface Extraction multi phase mixture Crystalization Refluxing Common chemical reactions liquid / liquid, liquid / solid
Brief: The kettle body is designed by double glazing glass reactor, the inner layer into the reaction solution to do the reaction was stirred interlayer can pass into the type of the cold heat source circulating heating or cooling the reaction can also be used in high temperature, low temperature, or vacuum experiment reflux and distillation of the reaction solution. It is the ideal equipment for primary and secondary schools of modern chemistry experiments, biopharmaceutical and synthesis of new materials. Features: 1. A full set of glassware with GG3.3 borosilicate glass production with good chemical and physical properties 2. Limit temperature of 250°C for high temperature experiments, and limit temperature of -60°C for low temperature experiments. 3. Titanium ring, new titanium alloy mechanical seal, sealing 0.098Mpa. 4. The PT100 temperature, and is a liquid crystal display. More accurate temperature measurement and more convenient. 5. Frequency control, AC induction motor. Constant speed, brushless, no spark, security and stability, and continuous work. 6. Quality 304 stainless steel all-inclusive PTFE stirring rod and a three-bladed propeller structure. 7. The bottom flanged discharge port with a Teflon value, aluminum parts flange fixed container no dead ends.
Brief Introduction of the Jacket Glass Reactor The series of reactor kettles is my company according to the actual requirements of customers and the standard production of new double glass reactor with cylindrical glass reactor body, which absorb the international and domestic advantages of similar products, while bold and innovative, not only easy to use (one can easily move, , And the structure of innovative and practical, beautiful appearance generous, leading domestic; for modern chemistry, fine chemicals, bio-pharmaceuticals, new materials, such as the synthesis of experimental and production of the ideal equipment. Specific specifications from 1L to 200L optional. The working principle of the series reactor: double-layer glass reactor inside the reaction material, but also can be vacuum to do the stirring reaction; sandwich can be connected to heat (water, water or hot oil or electric sets) to do heating or cooling; The reaction solution was controlled to evaporate and reflux. Main Features of the Jacket Glass Reactor 1, The use of borosilicate glass (GG17 material), has excellent physical and chemical properties. 2, Speed mixing, smooth and reliable operation, torque, no spark. 3, PTFE components mechanical seal, proprietary technology, can maintain the market similar products, high vacuum (-0.095mpa or so), the leading domestic. 4, PTEE discharge valve, kettle body and lid are also customized according to customer requirements. 5, The reaction of the sandwich heating (cooling) solution can be completely removed after the reaction, no solution. 6, Regardless of refrigeration or heating, can be produced according to customer requirements matching products. 7, The overall structure of science, novel, practical, beautiful, leading domestic.
Jacket Glass reactor principle is two parts, in the inner glass,the mix bar is continous stirring to make mixing or evaporating reaction under negative vacuum pressue. The stirring is under speed controlling. The jacketed glass could supply heating or cooling material to help the chemical reaction. Recently glass reactors has been widely used in chemical, biological and pharmaceutical experiment and prodcuction. Brief Introduction of the Jacket Glass Reactor The series of reactor kettles is my company according to the actual requirements of customers and the standard production of new double glass reactor with cylindrical glass reactor body, which absorb the international and domestic advantages of similar products, while bold and innovative, not only easy to use (one can easily move, , And the structure of innovative and practical, beautiful appearance generous, leading domestic; for modern chemistry, fine chemicals, bio-pharmaceuticals, new materials, such as the synthesis of experimental and production of the ideal equipment. Specific specifications from 1L to 200L optional. The working principle of the series reactor: double-layer glass reactor inside the reaction material, but also can be vacuum to do the stirring reaction; sandwich can be connected to heat (water, water or hot oil or electric sets) to do heating or cooling; The reaction solution was controlled to evaporate and reflux.
Features 1. Reaction kettle can be lift up and down. It is convenient to feed materials and take the blocky crystals out of the kettle. 2. Reaction kettle can be rotated for 120 degree, it is convenient to use and clean. Technical Data Glass reaction vessel: 10L; Jacket capacity: 3L; High borosilicate glass 3.3; Kettle body tolerable temperature: -80 to +200 degree; Kettle body resistance to temperature difference: 90 degree; Motor power: 90W; Stirring speed: 50 to 500rpm; Operating pressure(MPa): Vacuum or normal pressure.
Features 1. Reaction kettle can be lift up and down. It is convenient to feed materials and take the blocky crystals out of the kettle. 2. Reaction kettle can be rotated for 120 degree, it is convenient to use and clean. Technical Data Glass reaction vessel: 30L; Jacket capacity: 10L; High borosilicate glass 3.3; Kettle body tolerable temperature: -80 to +200 degree; Kettle body resistance to temperature difference: 90 degree; Motor power: 90W; Stirring speed: 50 to 500rpm; Operating pressure(MPa): Vacuum or normal pressure.
Features 1. Reaction kettle can be lift up and down. It is convenient to feed materials and take the blocky crystals out of the kettle. 2. Reaction kettle can be rotated for 120 degree, it is convenient to use and clean. Technical Data Glass reaction vessel: 50L; Jacket capacity: 16L; High borosilicate glass 3.3; Kettle body tolerable temperature: -80 to +200 degree; Kettle body resistance to temperature difference: 90 degree; Motor power: 120W; Stirring speed: 50 to 500rpm; Operating pressure(MPa): Vacuum or normal pressure.
Jacket Glass reactor principle is two parts, in the inner glass,the mix bar is continous stirring to make mixing or evaporating reaction under negative vacuum pressue. The stirring is under speed controlling. The jacketed glass could supply heating or cooling material to help the chemical reaction. Recently glass reactors has been widely used in chemical, biological and pharmaceutical experiment and prodcuction. Main Features of the Jacket Glass Reactor 1, The use of borosilicate glass (GG17 material), has excellent physical and chemical properties. 2, Speed mixing, smooth and reliable operation, torque, no spark. 3, PTFE components mechanical seal, proprietary technology, can maintain the market similar products, high vacuum (-0.095mpa or so), the leading domestic. 4, PTEE discharge valve, kettle body and lid are also customized according to customer requirements. 5, The reaction of the sandwich heating (cooling) solution can be completely removed after the reaction, no solution. 6, Regardless of refrigeration or heating, can be produced according to customer requirements matching products. 7, The overall structure of science, novel, practical, beautiful, leading domestic.
number,Name ,Quantity,instructions 1,Double layer reactor 20L,one,GG17Borosilicate glass 2,Stirring motor,one,Speed 0-780rpm 3,Frequency control,one,No classless ajustable speed £¬digital speed display(digital display temp) 4,Five mouth kettle,one,Euipped with the reactor body£¬condensor(backflow and condensor)¡¢feeding funnel, Thermometer tube,valve for lower the temp,stirring mouth;and can equip the solid charging port according to the customer needs 5,PTFE sealing,One set,Supply high vacuum environment 6,Frame of the reactor,one,Support the reactor,304 7,condensor,one,Condensation and distillation(backflow) 8,PTFE discharging valve,one,Can be discharged 9,Thermometer tube,one,For contain the thermometer 10,Feeding funnel,one,For dropping of the liquid 11,PTFE stirring rod,one,PTFE,with the liner stainless steel 12,Distillation and condensation pipe,one,Use to connect the kettle cover and condensor,separation,concentration 13,Release valve,one,Use to release air and fill the nitrogen 14,Vacuum table,one,Measuring the vacuum degree of the reactor 15,Bracket of the reaction body and cover,one,Aluminum alloy 16,Tray of the kettle body,one,Aluminum alloy 17,Hex wrench ,one,Adjust the frame 18,Universal joint,one,one. wooden cases or carton
Brief Introduction of the Jacket Glass Reactor The series of reactor kettles is my company according to the actual requirements of customers and the standard production of new double glass reactor with cylindrical glass reactor body, which absorb the international and domestic advantages of similar products, while bold and innovative, not only easy to use one can easily move, , And the structure of innovative and practical, beautiful appearance generous, leading domestic; for modern chemistry, fine chemicals, bio pharmaceuticals, new materials, such as the synthesis of experimental and production of the ideal equipment. Specific specifications from 1L to 200L optional. The working principle of the series reactor: double layer glass reactor inside the reaction material, but also can be vacuum to do the stirring reaction; sandwich can be connected to heat water, water or hot oil or electric sets to do heating or cooling; The reaction solution was controlled to evaporate and reflux. Jacket Glass reactor principle is two parts, in the inner glass,the mix bar is continous stirring to make mixing or evaporating reaction under negative vacuum pressue. The stirring is under speed controlling. The jacketed glass could supply heating or cooling material to help the chemical reaction. Recently glass reactors has been widely used in chemical, biological and pharmaceutical experiment and prodcuction.
Jacketed glass reactor is with double glass design, the inner layer placed reaction solvent can do the mixing reaction, the inter layer can be added with the different hot and cold sources (frozen liquid, hot water or hot oil) to do loop heating or cooling reaction. Under the conditions of constant temperature setting, the mixing reaction can be carried on inside the sealed glass reactor according to requirements under the conditions of atmospheric pressure or negative pressure, and the reflux and distillation of the reaction solution can also be done, it is the ideal pilot and production equipment of modern fine chemical plant, biological pharmacy and synthesis of new materials. TOPTION glass reactor wide capacity range 1L -250L, single layer, jacketed layer, three layer different options, could support customization, include explosion proof system, reaction vessel lifting & rotating function, filtration and ultrasonic homogenize function, etc. We provide customization with greatest flexibility, matched chillers, heaters, vacuum pump are available.
Jacketed glass reactor is made according to customers actual requirements and new standards. It absorbs the advantages of similar products at home and broad, and also makes a bold innovation. At the same time, the products have the characteristics: easy to use(one person moving, operating, cleaning, installing, unloading); novel and practical structure; beautiful appearance; leading domestic. It is an ideal instrument for modern chemistry, fine chemicals, bio-pharmaceuticals, new materials synthesis, test, and production.
According to the customer's requirements and standard, we manufacture frequency control speed jacketed glass reactor which has many functions to satisfy kinds of experiments. That is, we innovate to assemble rectification column and create jacketed glass reactor production line. Double-layer glass reactor can do stirring reaction in the inner layer under the condition of vacuum. The interlayer can make constant temperature for heating or cooling reaction through the heat or cold source(freezing liquid, water or hot oil).
S-Series jacketed glass reactors are temperature and vacuum controlled instruments and pharmaceutical-grade mixing vessels with a 304 stainless steel reinforced PTFE agitator, capable of mixing and speeding up to 600 RPM. Constant speed, pressure and temp. Digital display, precise control Smooth discharge, no residue Borosilicate glass
Brief introduction of jacketed glass reactor: The kettle body is designed by double glazing glass reactor, the inner layer into the reaction solution to do the reaction was stirred interlayer can pass into the type of the cold heat source circulating heating or cooling the reaction can also be used in high temperature, low temperature, or vacuum experiment reflux and distillation of the reaction solution. It is the ideal equipment for primary and secondary schools of modern chemistry experiments, biopharmaceutical and synthesis of new materials. Features of jacketed glass reactor: 1. A full set of glassware with GG3.3 borosilicate glass production with good chemical and physical properties 2. Limit temperature of 250C for high temperature experiments, and limit temperature of -60C for low temperature experiments. 3. Titanium ring, new titanium alloy mechanical seal, sealing 0.098Mpa. 4. The PT100 temperature, and is a liquid crystal display. More accurate temperature measurement and more convenient. 5. Frequency control, AC induction motor. Constant speed, brushless, no spark, security and stability, and continuous work. 6. Quality 304 stainless steel all-inclusive PTFE stirring rod and a three-bladed propeller structure. 7. The bottom flanged discharge port with a Teflon value, aluminum parts flange fixed container no dead ends.
Brief about glass reactor: The kettle body is designed by double glazing glass reactor, the inner layer into the reaction solution to do the reaction was stirred interlayer can pass into the type of the cold heat source circulating heating or cooling the reaction can also be used in high temperature, low temperature, or vacuum experiment reflux and distillation of the reaction solution. It is the ideal equipment for primary and secondary schools of modern chemistry experiments, biopharmaceutical and synthesis of new materials. Features about glass reactor: 1. A full set of glassware with GG3.3 borosilicate glass production with good chemical and physical properties 2. Limit temperature of 250°C for high temperature experiments, and limit temperature of -60°C for low temperature experiments. 3. Titanium ring, new titanium alloy mechanical seal, sealing 0.098Mpa. 4. The PT100 temperature, and is a liquid crystal display. More accurate temperature measurement and more convenient. 5. Frequency control, AC induction motor. Constant speed, brushless, no spark, security and stability, and continuous work. 6. Quality 304 stainless steel all-inclusive PTFE stirring rod and a three-bladed propeller structure. 7. The bottom flanged discharge port with a Teflon value, aluminum parts flange fixed container no dead ends.
Brief introduction of jacketed glass reactor: The kettle body is designed by double glazing glass reactor, the inner layer into the reaction solution to do the reaction was stirred interlayer can pass into the type of the cold heat source circulating heating or cooling the reaction can also be used in high temperature, low temperature, or vacuum experiment reflux and distillation of the reaction solution. It is the ideal equipment for primary and secondary schools of modern chemistry experiments, biopharmaceutical and synthesis of new materials. Features about glass reactor: 1. A full set of glassware with GG3.3 borosilicate glass production with good chemical and physical properties 2. Limit temperature of 250C for high temperature experiments, and limit temperature of -60C for low temperature experiments. 3. Titanium ring, new titanium alloy mechanical seal, sealing 0.098Mpa. 4. The PT100 temperature, and is a liquid crystal display. More accurate temperature measurement and more convenient. 5. Frequency control, AC induction motor. Constant speed, brushless, no spark, security and stability, and continuous work. 6. Quality 304 stainless steel all-inclusive PTFE stirring rod and a three-bladed propeller structure. 7. The bottom flanged discharge port with a Teflon value, aluminum parts flange fixed container no dead ends.
Lab Chemical Jacketed Glass Reactor price Brief introduction of jacketed glass reactor: The kettle body is designed by double glazing glass reactor, the inner layer into the reaction solution to do the reaction was stirred interlayer can pass into the type of the cold heat source circulating heating or cooling the reaction can also be used in high temperature, low temperature, or vacuum experiment reflux and distillation of the reaction solution. It is the ideal equipment for primary and secondary schools of modern chemistry experiments, biopharmaceutical and synthesis of new materials. Features: 1. A full set of glassware with GG3.3 borosilicate glass production with good chemical and physical properties 2. Limit temperature of 250C for high temperature experiments, and limit temperature of -60C for low temperature experiments. 3. Titanium ring, new titanium alloy mechanical seal, sealing 0.098Mpa. 4. The PT100 temperature, and is a liquid crystal display. More accurate temperature measurement and more convenient. 5. Frequency control, AC induction motor. Constant speed, brushless, no spark, security and stability, and continuous work. 6. Quality 304 stainless steel all-inclusive PTFE stirring rod and a three-bladed propeller structure. 7. The bottom flanged discharge port with a Teflon value, aluminum parts flange fixed container no dead ends.
Glass lined reactor, jacketed, 50L-80000L capacity, two pieces type (i.e. FK, open type) and one piece type ( i.e. FF, closed type), with good anti-corrosion performance widely to be used in the reaction, neutralization, and polymerization etc process: 1. The detailed assembling of our Glass lined reactor: (1) Electric Motor: Explosion-proof, Ordinary type; (2) Reducer(i.e.gear box): Cycloidal-pin wheel type, Spiral bevel gear type, Helical gear type; (3) Seal type: Packing seal, Mechanical Seal (single type, double type); (4) Agitator: Frame type, Anchor type, Impeller type, Paddle type, combination type; (5) Thermometer Pocket: A type (Straight); B type (Slant), C type ( Slant with Wing); (6) Bottom discharge Valve: Upper extension type, 2. The technical performance of our Glass lined reactor: (1)The working pressure: Inside the vessel: less than or equal to 1.0Mpa (for Packing seal: less than or equal to 0.2Mpa; for Single mechanical seal: less than or equal to 0.4Mpa, for Double mechanical seal: less than or equal to1.0Mpa); Inside the jacket: less than or equal to 0.6Mpa; (2) The working temperature: from -20 degree centigrade to 200 Celsius degree, the cooling shock: 110 Celsius degree, the thermal shock: 120 Celsius degree; (3) The Glass-lining thickness: 0.8-2.0mm; (4) The high Voltage-test to the Glass-lining: 20KV. (5) Nonstick: the smooth and clean glass-lining surface is nonstick to the materials. (6) Anti-corrosion performance: suitable for all kinds of organic or inorganic acids, organic solvents and weak alkaline etc. Besides Glass lined reactor, we also make Glass lined storage tank 200L-50000L, distiller 300L-6000L, condenser and dryer etc, certified by ISO900 and as one world class manufacturer & supplier of Glass lined equipments in china, we promise our products in high quality with favorable price and excellent service, select us, select trust, please contact us for more details, thanks.
JH GLASS pattern glass is from 3mm-12mm , all is temperable quality , mainly used for glass table , cabinet, window,door ,indoor partition and curtain wall . the main pattern including nashiji,mistlite,karatachi,moru,hitchcross,chinchilla,watercube,rain,bamboo ,etc. the main size includes 1830x2440mm,1650x2440mm.
