The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.
The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.
Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details
Napkins per Cycle 4 to 7. Power 230 V, 10 Amp, 50 Hz. Electric Heater - 800 W. Auto power cut off Yes. No. of napkins per cycle 4 to 7. No. of Cycles per day- 9 to 10 (in 12 hours). MS body PU painted. Housing External - CRCA Steel of 1.2 mm. Housing Internal - Insulated type. Insulation - Thermal ceramic sheet with Glass wool of 4-5 mm thick Emission Outlet - 2 inch on top. Flue gas pipe - 2 meter. Residue Ash - Sterlite Ash < 2gm per cycle. Door Design - Thermal insulated door. MCB rating - 16 Amp C Series. Electric cable - 2.5 meters. Dimensions (LXWXH) mm 320X230X520. Weight 18 kg
Incinerator To dispose off hospital waste, industrial waste with emission treatment systems Electrically operated as well as oil fired incinerators Capacity ranging from 3 kg/hour to 1 ton/hour
Incinertor is incoporated with all emission treatment systems. Available both electrically operated as well as oil fired incinerators. Capacity ranging from 1 kg per hour to 2 tons/hour Wooden crate
Heavies produced from dense media floatation of incinerator Non-Ferrous
Main features: It has been assessed and registered as meeting the requirements of ISO9001 and 14000. With Italian fuel injection system Automatically control system, digital display Time set, automatically incinerate and ignite Vacuum burning, fuel is diesel fuel Can meet the requirements of the national environmental protection standard. Low failure rate, low maintenance and running cost Technical parameter: Model Capacity Fuel Sampling Methods Power Power Supply JK-MI-10 10Kg/H Diesel fuel Automatically 700W 220V/50HZ JK-MI-20 20Kg/H Diesel fuel Automatically 900W 220V/50HZ JK-MI-30 30Kg/H Diesel fuel Automatically 1100W 220V/50HZ JK-MI-50 50Kg/H Diesel fuel Automatically 1800W 220V/50HZ.
The equipment uses the alkalinity electricity magnetization water for the mist and dust purification dust remover, the desulphurization, and the collection coefficient has achieved above 99.99%, the electromagnetism catalysis water does not need to carry on the whole big service, the movement process does not have worry for the leakage. The sealing tight is good, also does not need to carry on the temperature decrease to the haze the filtration steam, makes the haze purify directly, it is easy to operate and it takes less land; compares with a bag filter, its cost only needs one tenth as the bag filter. It usesgas generator instead of diesel oil ignition combustion, so it can save 70% than the diesel cost, And there isn't the secondary pollution, The service life is long, and need less maintenance. Capacityú¦30-35T/Day Stove chamber temperatureú¦800íµ-950íµ Temperature of incinerator ú¦1100íµ-1250íµ Stayin time in chamberú¦ú+3s Elimination rate of poisonous and harmful Materialú¦ú+99.99% Container loaded size, 40 tons totally
Marine incinerator
Medical Incinerator Product Description: It is suitable for the health sector, farm, blood station, epidemic prevention station, surgical waste in hospital and viral material. Types of medical waste incinerated: disposable syringe, infusion set, cotton yarn, some materials used in the operating room , stump, rubber gloves, dumped protective clothing and sickbed supplies which are infectious and hazardous Main features: It has been assessed and registered as meeting the requirements of ISO9001 and 14000. With Italian fuel injection system Automatically control system, digital display With the founction of time set, automatically incinerate and igniteï¼?Negative pressure burningï¼?Use the diesel for fuel. Can meet the requirements of the national environmental protection standard. Low failure rate, low maintenance and operating cost Safety device: Burner safety device: fuel supplies can be automatically cuted off ï¼?when the burner ignition device is unnormal Technical parameter: Model Capacity Fuel Ignition Mode Power Power Supply JK-MI-10 10Kg/H Diesel fuel Automatically 700W 220V/50HZ JK-MI-20 20Kg/H Diesel fuel Automatically 900W 220V/50HZ JK-MI-30 30Kg/H Diesel fuel Automatically 1100W 220V/50HZ JK-MI-50 50Kg/H Diesel fuel Automatically 1800W 220V/50HZ Basic Configuration: Furnace: 1 set (steel furnace, refractories, insulation materials) Dust collector: 1 set Exhaust pipe: 1 set Oil Pump: 1 unit Fan: 1 set Safety equipment: 1 set (including the burner safety devices, lightning protection safety devices, etc.) Italian importing fuel injection system: 1 set Carbon steel storage tank: 1 unit Carbon steel chimney: 1 set Carbon steel flue: 1 set Automatically control system: 1 set
Island incinerator Fire print island incinerator, Fire print domestic waste incinerator. No fuel is required for the combustion process. Carbonized combustion does not require electricity. We separate the oxygen-rich gas from the air Help domestic garbage decompose at low temperature. Household waste incinerators do not produce flames, The chimney emits transparent gas without odor. Fire print brand waste incinerator, There is no dust in the chimney. A small amount of steam is discharged from the pipe. After cooling down, Tar recovery, Disinfection and deodorization, 2500W/220v power supply is needed to eliminate the smell of steam. Feeding mechanism power 2.2KW/380V The incinerator has a volume of 5 cubic meters of garbage, The incinerator feeds 1.8-1.0 cubes of waste at a time. Enter household garbage 3 to 4 times a day. Fire print garbage incinerator fill it with garbage. Environmentally friendly incinerator low temperature 50 to 380 â??. Need a pool of 3-5 cubic meters, Cycle cooling. The burning capacity is between 800 and 1600 kg. Output steam: wood vinegar. Output ash: ceramic ash with negative ions. Excellent reduction: 1/200 or 1/500. Fire print brand Delivery from the factory: 93000USD/piece, Need 380V/50HZ The overall container size of the equipment: length 1500cm, width 270cm, height 280cm. Green incinerator, integral container with shell, easy hoisting.
Small incinerator Fire print domestic waste incinerator. No fuel is required for the combustion process. Carbonized combustion does not require electricity. We separate the oxygen-rich gas from the air Help domestic garbage decompose at low temperature. Household waste incinerators do not produce flames, The chimney emits transparent gas without odor. Fire print brand waste incinerator, There is no dust in the chimney. A small amount of steam is discharged from the pipe. After cooling down, Tar recovery, Disinfection and deodorization, 2500W/220v power supply is needed to eliminate the smell of steam. Feeding mechanism power 2.2KW/380V The incinerator has a volume of 5 cubic meters of garbage, The incinerator feeds 1.8-1.0 cubes of waste at a time. Enter household garbage 3 to 4 times a day. Fire print garbage incinerator fill it with garbage. Environmentally friendly incinerator low temperature 50 to 380 Need a pool of 3-5 cubic meters, Cycle cooling. The burning capacity is between 800 and 1600 kg. Output steam: wood vinegar. Output ash: ceramic ash with negative ions. Excellent reduction: 1/200 or 1/500. Fire print brand Delivery from the factory: 93000USD/piece, Need 380V/50HZ The overall container size of the equipment: length 1500cm, width 270cm, height 280cm. Green incinerator, integral container with shell, easy hoisting.
Bahrain waste incinerator household waste incinerator Fully enclosed space, low temperature gasification of plastic waste. There is temperature in the incinerator, Forming a gas circulation, Naturally inhaling a small amount of oxygen-enriched air, Supply carbon energy, Carbon diffusion energy in the incinerator, The nearby garbage is dried, The plastic in the incinerator is vaporized at 50-200 . Become a carbon material, Some turned into fat, Enter the pipeline with water vapor, Recovered by the device on the pipeline, Adsorption, leaving tar. Separate the water. Finally deodorized, anti-virus, harmless exhaust. Fire print household waste incinerator, medical waste incinerator, Low carbon emissions, Low cost of use, Complete reduction, Solids can be used as soil additives. Bahrain waste incinerator household waste incinerator Please tell me how many kilograms of garbage you need to burn in 24 hours. We customize incinerators, prices,
UAE waste incinerator small incinerator Fully enclosed space, low temperature gasification of plastic waste. There is temperature in the incinerator, Forming a gas circulation, Naturally inhaling a small amount of oxygen-enriched air, Supply carbon energy, Carbon diffusion energy in the incinerator, The nearby garbage is dried, The plastic in the incinerator is vaporized at 50-200 C. Become a carbon material, Some turned into fat, Enter the pipeline with water vapor, Recovered by the device on the pipeline, Adsorption, leaving tar. Separate the water. Finally deodorized, anti-virus, harmless exhaust. Fire print household waste incinerator, medical waste incinerator, Low carbon emissions, Low cost of use, Complete reduction, Solids can be used as soil additives. UAE waste incinerator small incinerator Please tell me how many kilograms of garbage you need to burn in 24 hours. We customize incinerators, prices, Please contact us
UAE waste incinerator small incinerator Fully enclosed space, low temperature gasification of plastic waste. There is temperature in the incinerator, Forming a gas circulation, Naturally inhaling a small amount of oxygen-enriched air, Supply carbon energy, Carbon diffusion energy in the incinerator, The nearby garbage is dried, The plastic in the incinerator is vaporized at 50-200 °C. Become a carbon material, Some turned into fat, Enter the pipeline with water vapor, Recovered by the device on the pipeline, Adsorption, leaving tar. Separate the water. Finally deodorized, anti-virus, harmless exhaust. Fire print household waste incinerator, medical waste incinerator, Low carbon emissions, Low cost of use, Complete reduction, Solids can be used as soil additives. UAE waste incinerator small incinerator Please tell me how many kilograms of garbage you need to burn in 24 hours. We customize incinerators, prices, Please contact us
Bahrain waste incinerator household waste incinerator Fully enclosed space, low temperature gasification of plastic waste. There is temperature in the incinerator, Forming a gas circulation, Naturally inhaling a small amount of oxygen-enriched air, Supply carbon energy, Carbon diffusion energy in the incinerator, The nearby garbage is dried, The plastic in the incinerator is vaporized at 50-200 °C. Become a carbon material, Some turned into fat, Enter the pipeline with water vapor, Recovered by the device on the pipeline, Adsorption, leaving tar. Separate the water. Finally deodorized, anti-virus, harmless exhaust. Fire print household waste incinerator, medical waste incinerator, Low carbon emissions, Low cost of use, Complete reduction, Solids can be used as soil additives. Bahrain waste incinerator household waste incinerator Please tell me how many kilograms of garbage you need to burn in 24 hours. We customize incinerators, prices,
Aluminium produced from dense media floatation of Incinerator Non-Ferrous
Bio Medical Waste Incinerator and Unwanted materials generated by human activities from Residential, Commercial and Industrial areas in Towns and Metro Cities
Smart Scrap is a leading trader with our processing ScrapYards in EU. We offer: Incinerated Scrap Premium Quality: 7- 8 % impurities Origin: EU Quantity: up to 1000 tons per month Delivery: by containers/tipper trucks Please send a quote to get more details as well as photos and video!
