Hydrocarbon resin Hydrocarbon 85 Hydrocarbon resin Liquid hyrdocarbon ap 25 C5 hydrocarbon resins C9 hydrocarbon resins Hydrogenated resins Pure monomer resins
C5 Resin is a new resin developed specifically to meet the technical requirements for hot melt road marking in china and other Asian markets . hydrocarbon resin is suitable to be used in hot melt road marking paint. It can enhance the paint's toughness, hardness and adhesion, and to form a smooth paintwork, and by adding additives to make resin at the Four Seasons always in a stable condition, and rosin resins and good compatibility. In the high-end mixed paint, paint film can form a water-resistant, UV resistant, chemical-resistant properties, and foreign tourists and the brightness of the dry there has been a marked improvement.
hydrogenated C9 hydrocarbon resin which compete and substitute C5 resin in Hot Melt Adhesive and Road marking paint
PF100 resin is yellow color C5 hydrocarbon resin which is designed to tackify a variety of adhesive polymers, including ethylene vinyl acetate (EVA), styrenic block copolymers (SIS, SBS, SEBS), amorphous polyalphaolefins (APAO).
PF140 resin is yellow color C5 hydrocarbon resin, with good cohesion and aging stability, which is designed to tackify a variety of adhesive polymers, including ethylene vinyl acetate (EVA), styrenic block copolymers (SIS, SBS, SEBS), Natural Rubber.
PF102 resin is yellow color C5 hydrocarbon resin obtained from aliphatic petroleum-derived monomers. It is mainly used for hot melt road marking paint cause the acid modification could improve tack property and flowability.
PF120 resin is light yellow color aromatic modified C5 hydrocarbon resin which has low Mz and narrow molecular weight distribution. It could be tailored to provide an optimal cohesion balance in SIS-based HMPSA.
PF130 resin is yellow color C5 hydrocarbon resin which is designed to tackify a variety of adhesive polymers, including ethylene vinyl acetate (EVA), styrenic block copolymers (SIS, SBS, SEBS), amorphous polyalphaolefins (APAO).
Tr5100 hydrocarbon resin is a low molecular weight aliphatic hydrocarbon resin that has been designed for hot melt road marking system. It can enhance the adhesion and hardness of road marking paint, and make paint in stable situation in the four seasons. Application: hot melt road marking paint Features of tr5100 in hot melt road marking: Light color Good fluidity High anti-fraction Even distribution of filling material without sedimentation. Good heat stability Fast drying speed Good weather resistance, adhesive force and stain resistance.
Ttr5100 is an aliphatic resin widely used in rubber tire.The resin has no aromatic content, and is fully compatible with nature rubber, various kinds of synthetic rubber(sbr, br, cr, nbr, iir, epdm), polyethylene, polypropyene, sis, sebs, eva as well as nature tackifier resins(such as terpene, colophony and its derivatives). Properties in rubber tires Excellent tackifying property Improve extensibility and spalling resistance Cure time and the physical properties after sulfuration are not affected Avoid adhesive capacity to processing machinery Help filling material distribute evenly Proper color In the process of rubber tire, ttr5100 can be used as tackifier, reinforcer, extender and processing oil. Application field recommended: Mixing of rubber tire, other rubber products, such as tread, shoes heel, floor, belt etc. Light-colored rubber daily use products.
C5 aliphatic hydrocarbon resin for hot melt adhesives C5 Hydrocarbon resin is playing gradually more and more important role as tackifier in the adhesive and sealant industry, especially in the application of hot melt adhesive and pressure sensitive adhesive. The series of petroleum resins product are a category of C5 aliphatic hydrocarbon resins applicable for hot melt adhesive and pressure sensitive adhesive. These products have an excellent compatibility with a wide variety of elastomers including natural rubber (NR), synthetic rubber, Ethylene Vinyl Acetate (EVA) and styrenic block copolymer such as SIS, SBS, SEBS, SEPS. Additionally, they also have a good compatibility with the natural tackfying resins such as terpene, rosin and thereof derivatives. At the same time, all the properties of adhesive can be improved in various degrees by the application of these C5 petroleum resins. In recent years, C5 petroleum resins are gradually replacing the natural resin tackfier(such as terpene and rosin) due to its advantages of high deep strength, fast tack, stable adhesion performance, moderate melting viscosity, high thermal resistance, good compatibility with polymer basis, economic price. Good fluidity which can improve the wetting property of master material. Excellent initial adhesion performance Super aging resistance performance Light color material Transparent, little smell and low volatility material Application field: hot melt adhesives, solvent base adhesives, adhesives, sealants, glue etc
Gd-dh series hydrocarbon resin is water white dcpd hydrogenated hydrocarbon resin derived from cyclic ingredients. Dcpd hydrogenated petroleum resin is designated to tackify for a variety of adhesive polymers including eva, sis, hma, hmpsa, sbpsa. Soluble in most aliphatic and aromatic and chlorinated hydrocarbons. Insoluble in alcohols and water. Application: Adhesive, hot melt pressure sensitive adhesive, solvent-borne adhesive, rubber, varnish, coating etc.
Hydrogenation of hydrocarbon resins is primarily done to improve the color and stability (UV and heat resistance) of the resin by removing vulnerable double bonds. Full, partial, and selective hydrogenation is a method used to produce resins with broad compatibility and good stability.
BP series is specially designed for adhesives application. Characterised by lighter colour, less odour as well as wider compatibility and solubility, they are more suitable for hot melt adhesives, bookbinding, shoes adhesive and solvent adhesives etc.
C5 Hydrocarbon resin is a pale yellow C5 aliphatic hydrocarbon resin having excellent color, flow, and heat stability and thus highly recommended for Hot Melt Road Marking Paints FEATURES: Light Colour Gradient - Excellent Fluidity- Better Heat Stability - High Drying Rate and Anti - Abrasion Outstanding affinity for pigments Superior Process Ability Strong dirt-resistant
Specification: Softening Point()ï¼? 80-90 90-100 100-110 110-120 Color(Gardner in 50% toluene),â?¤ 8-18 8-18 8-18 8-18 Ash(%),â?¤ 0.08 0.08 0.08 0.08 Acidity(mgKOH/mg),â?¤ 0.6 0.6 0.6 0.6 Recommended Application Adhesive Paint, Tyre Rubber Adhesive, Tire Rubber Adhesive, Tyre Rubber Application: 1. Used in Hot melt adhesive(HMA) and Solvent based adhesive(SBA) as tackifier resin 2. Solvent based paint 3. Printing Ink 4. Rubber Compounding 5. Asphalt emulsion mixtures Any inquiry, pls contact sofia.chu(at)zzdenglan.com freely.
C5 Petroleum Resin with Grade SENO-PC5100 is a high class refined C5 Aliphatic Hydrocarbon Resins designed specially as a Binder to meet the technical requirements for hot melt road marking paint in Asian and American Markets.Our C5 petroleum resins offer good dispersion of fillers and pigments and also show excellent flow properties in Hot Melt Road Marking Paint Systems. Our C5 Hydrocarbon Resins are mainly recommended to the Thermoplastic Road Marking Paint and Hot Melt Road Marking Paint industry. Product Parameters Items SENO-PC5100 Appearance (eyeballing) yellowish granule Softening Point (R&B)�ºC 95-105 Color No. (50% Toluene)Ga. 5.0 Max Acid Value(mgKOH/g) 1.5 Max Ash Content(wt%) 0.10 Max Melt Viscosity(200�ºC)Cps 250 Max Application : SENO-PC5100 mainly use for Hot Melt Road Marking Paint,Thermoplastic Road Marking Paint and Pressure Sensitive Adhesives Packaging & Shipping :25kg/bag Store closed containers in a cool, dry, well-ventilated area. Avoid exposure to direct sunlight.
PN130 resin is yellow color C9 hydrocarbon resin obtained from the polymerization of unsaturated aromatic resin. The most important uses are vehicles for painting and ink.
PN140 resin is yellow color C9 hydrocarbon resin obtained from the polymerization of unsaturated aromatic resin. The most important uses are vehicles for asphalt and printing ink.
PE120 resin is thermoplastic, light brown color C9 hydrocarbon resin obtained from polymerizing unsaturated aromatic resin through the process of thermal polymerization. The major usages are paint and coating.
