Humidity measuring range: 1%rh~ 99 %rh Supply voltage vs: 10 v Time constant (33 to 80 % rh, still air @ 63%) ta: 3.5 s Deviation to typical response curve (10% to 90%) rh) :+/-2 %rh
A) voltage supply: 5 vdc B) humidity measuring range: 0~100 %rh C) response time (at 63% of signal) 33%rh to 75%rh(3): 5 s D) suitable for small bulk assembly E) reliability not affected by repeated condensations F) full interchangeability. Better than +/-3%rh and +/-0.15oc G) demonstrated reliability and long term stability H) typical 1 to 3.6 volt dc output for 0 to 100% rh at 5 v dc supply I) humidity calibrated within +/- 3% rh @ 55% rh J) temperature measurement through ntc 10 kª+ +/- 1% direct output K) ratiometric to voltage supply within the specified range
4.Electrical characteristics 4.1 input power: 1vac (sine wave), 1khz 4.2 operating temperature range: -20=j ~ 70=j 4.3 operating humidity range: 95 %rh or less 4.5 accuracy: f+5 %rh (at 25=j, 60 %rh) 4.6 hysteresis: within 2 %rh (40 %rh ~ 80 %rh) 4.7 stability: 1 year < 2 %rh 500pcs/bag 10000pcs/carton
Economic and reasonable OEM humidity sensor module Humidity voltage output: 1-3.6V Low power consumption Long stability and proven reliability not affected by repetitive condensations Direct interface with micro-controller RoHS Directive-compliant
Based on the rugged HUMIREL humidity sensor, GP3515 is a dedicated humidity and temperature plug and play transducer designed for OEM applications where a reliable and accurate measurement is required. Direct interface with a micro-controller is made possible with the moduleâ??s humidity linear voltage and direct NTC outputs. GP3515 is designed for high volume and demanding applications. Main features Tests under harsh chemical conditions demonstrate good operation in presence of salt atmosphere, SO 2 (0.5%), H 2 S (0.5%), O 3 , NOx, NO, CO, Softener, acids (H 2 SO 4 , HNO 3 , HCl), HMDS, Insecticide, Cigarette smoke . Product free from Lead, Cr (6+), Cd and Hg. Compliant with RoHS Reliability not affected by repeated condensations Full interchangeability. Better than +/-3%RH and +/-0.15°C Typical 1 to 3.6 Volt DC output for 0 to 100% RH at 5 V DC supply Humidity calibrated within +/- 3% RH @ 55% RH Temperature measurement through NTC 10 kΩ +/- 1% direct output Ratiometric to voltage supply within the specified range Resistance to chemical and physical stresses · GP3515 has circuit to protect against Electrostatic discharges upto 15 KV air discharge. · GP3515 is protected against reverse polarity · GP3515 is not light sensitive · Additional tests under harsh chemical conditions demonstrate good operation in presence of salt atmosphere, SO 2, O 3, NO, CO,CO2, Softener, Soap, acids. -
1. General Our humidity and temperature sensor module is designed base capacitive humidity and temperature sensor by GP Systems. This product utilizes humidity sensor capacitor (HS1101, France Humirel) with optional temperature sensor Pt100 , with characteristics of stable, high accuracy, quick response, good crossing-over and it also use craftwork of SMD, and so own extremely small body, stable and reliably performance. The quality guarantee time is 12 months. 2. Application Electron , pharmaceutical industry, food processing, warehouses, telecom industry, AHUâ??s, Humidity chambers etc. 3. Shape Module (GP15AP) encapsulation shape: With or without shell detail to the picture 4. Specifications: a) Power Supply: 5 V DC b)Electric Current : 2 mA ( Max. 5 mA) c) Temperature operating range: 0-90 0 C d) Humidity operating range: 0-100% Rh (Dew point) e) Humidity measurement range: 2- 99%Rh f) Temperature storing range: -20 to 85 0 C g) Humidity storage range: Under 95% Rh ( Below dew point) h) Accuracy: 2% Rh (At25 0 C and 60%Rh) -
HM1520/HM1520LF Relative Humidity Sensor Description Based on the rugged HS1101LF capacitive humidity sensor, HM1520LF is a dedicated humidity transducer designed for measurements at low humidity. Direct measurement of dew point or water concentration can be easily obtained in really cost effective conditions. Direct interface with a micro-controller is made possible with the module's linear voltage output. HM1520/HM1520LF Relative Humidity Sensor Main features * Tubular form for through wall mounting * Not affected by water condensation * Full interchangeability * Typical 1 to 1.6 Volt DC output for 0 to 20% RH at 5 V DC supply * Calibrated, linear voltage for easy electronic interface * Controlled temperature dependency * Ratiometric to voltage supply Humidity sensor specific features * No affected by long period at low humidity values. * Patented solid polymer structure. * High resistance to chemicals. * Fast response time. HM1520/HM1520LF Relative Humidity Sensor Applications * telecommunication environment * Automotive cabin air control * Home appliances * Agriculture and environment protection * Industrial process control systems
Htm2500/htm2500lf relative temperature and humidity sensor * hermetic housing * humidity calibrated within +/-2% @55%rh * temperature measurement through ntc 10koohms +/-3% direct output * small size product * typical 1 to 4 volt dc output for 0 to 100%rh at 5vdc Htm2500lf relative temperature and humidity sensor description Based on the rugged hts2010 humidity / temperature sensor, htm2500 is a dedicated humidity and temperature transducer designed for oem applications where a reliable and accurate measurement is needed. Direct interface with a micro-controller is made possible with the module's humidity linear voltage output. Htm2500lf relative temperature and humidity sensor features * full interchangeability * high reliability and long term stability * not affected by water immersion * ratiometric to vlotage supply * suitable for 3 to 10 vdc supply voltage Humidity sensor specific features * instantaneous de-saturation after long periods in saturation phase * fast response time * high resistance to chemicals * patented solid polymer structures Temperature sensor specific features * stable * high sensitivity Htm2500lf relative temperature and humidity sensor applications * industrial * process control * hygrostat * data logger
Frequency Output Temperature and Humidity Sensor HTF3226LF DESCRIPTION Based on the rugged HS1101LF humidity sensor, HTF3226LF is a dedicated humidity and temperature transducer designed for OEM applications where a reliable and accurate measurement is needed. It features a miniature connector for easy, cost-effective mechanical mounting. Direct interface with a micro-controller is made possible with the moduleâ??s linear frequency output. FEATURES * Full Lead free product * Calibrated within +/-5% @55%RH * Small size and very cost effective * Miniature connector (JST) * 10kOhms +/-3% NTC temperature sensor (1% optional) * The best combination of cost effectiveness and performance * Stable, linear proportional frequency output from 10% to 95%RH * Stable and reproducible characteristics with temperature * High reliability and long term stability Humidity Sensor Specific Features * Instantaneous de-saturation after long periods in saturation phase * Fast response time * High resistance to chemicals * Not affected by water immersion * Patented solid polymer structure Temperature Sensor Specific Features * High quality thermistor * Stable * High sensitivity APPLICATIONS * Printers * Home Appliance -
Voltage Output Temperature and Humidity Sensor HTG3515CH DESCRIPTION Based on the rugged HUMIREL humidity sensor, HTG3515CH is a dedicated humidity and temperature plug and play transducer designed for OEM applications where a reliable and accurate measurement is needed. Direct interface with a micro-controller is made possible with the module's humidity linear voltage and direct NTC outputs. HTG3515CH is designed for high volume and demanding applications. FEATURES * Voltage Supply: 5 Vdc * Nominal Output @55%RH: 2.401 - 2.559 V * Humidity Average Sensitivity: +26 mV/%RH * Current consumption: 1.2 mA dc * Humidity Measuring Range: 0 - 100 %RH * Humidity Operating Range: 0 - 100%RH * Temperature Operating Range: -40 - 110'C * Suitable for small bulk assembly * Product free from Lead, Cr (6+), Cd and Hg. Compliant with RoHS * Full interchangeability. Better than +/-3%RH and +/-0.25'C * Humidity calibrated within +/- 3% RH @ 55% RH * Temperature measurement through NTC direct output * Demonstrated reliability and long term stability * Reliability not affected by repeated condensations APPLICATIONS * Automotive * Home Appliance * Printers -
Temperature and Relative Humidity Sensor Module Description: Based on the rugged HS1101LF humidity sensor, HTF3000LF is a dedicated humidity and temperature transducer designed for OEM applications where a reliable and accurate measurement is needed. It features a very small size for easy, cost-effective mechanical mounting. Direct interface with a micro-controller is made possible with the module's linear frequency output. Features: * Small size product * Compliant with RoHS recommendations and most of Lead Free Soldering Process * Humidity calibrated within ±3% @55%RH at 5Vdc * Stable, proportional frequency output from 0 to 100% RH * High quality thermistor * One of the smallest humidity/temperature modules on the market * High reliability and long term stability * Not affected by water immersion * Stable characteristics with temperature * Part could be washed with distilled water Humidity Sensor Specific Features: * Instantaneous de-saturation after long periods in saturation phase * Fast response time * High resistance to chemicals * Patented solid polymer structure Temperature Sensor Specific Features: * 10kΩ ±1% NTC temperature sensor * Stable * High sensitivity APPLICATIONS: * Printers * HVAC controller -
Economic and reasonable sensor of high accuracy and quality Compact size and slim design Compatible plug-in module design Various combinations of temperature and humidity outputs including passive
Parameters: 1)storage temperature: -40 to 125ºc 2)supply voltage: 3.8v 3)humidity operating range: 1-100%rh 4)temperature operating range: -40 to 125ºc 5)vdd to gnd:-0.3 to 3.6v 6)digital i/o pins (data/sck) to vdd:-0.3 to vdd+0.3v 7)-10 to +10 ma Features: (1)dfn type package (2)relative humidity and temperature digital output, i2c interface (3)fully calibrated (4)lead free sensor, reflow solderable (5)low power consumption (6)fast response time and very low temperature coefficient Isweek provide smoke, gas, humidity&temperature, uv, fluid or other kinds of sensors More details welcome to inquiry: skype:isweek_laura
HTG3515CH Voltage Output Temperature and Humidity Sensor DESCRIPTION Based on the rugged HUMIREL humidity sensor, HTG3515CH is a dedicated humidity and temperature plug and play transducer designed for OEM applications where a reliable and accurate measurement is needed. Direct interface with a micro-controller is made possible with the moduleâ??s humidity linear voltage and direct NTC outputs. HTG3515CH is designed for high volume and demanding applications. HTG3515CH Voltage Output Temperature and Humidity Sensor FEATURES * Voltage Supply: 5 Vdc * Nominal Output at 55%RH: 2.401~2.559 V * Humidity Average Sensitivity: +26 mV/%RH * Current consumption: 1.2 mA dc * Humidity Measuring Range: 0~100 %RH * Humidity Operating Range: 0~100%RH * Temperature Operating Range: -40 ~110 deg C * Suitable for small bulk assembly * Product free from Lead, Cr (6+), Cd and Hg. Compliant with RoHS * Full interchangeability. Better than +/-3%RH and +/-0.25 deg C * Humidity calibrated within +/- 3% RH at 55% RH * Temperature measurement through NTC direct output * Demonstrated reliability and long term stability * Reliability not affected by repeated condensations HTG3515CH Voltage Output Temperature and Humidity Sensor APPLICATIONS * Automotive * Home Appliance * Printers
AM2322 Temperature and Humidity Sensor Product Overview AM2322 The digital temperature and humidity sensor is a kind of temperature and humidity composite sensor with the output of calibrated digital signal. The special temperature and humidity collection technology is adopted to ensure the high reliability and long-term stability of the product.The sensor includes a capacitive sensing element and a high-precision integrated temperature measurement element, which is connected to a high-performance microprocessor.The product has high quality, super fast response, strong anti-interference ability and high cost performance. AM2322 communication mode adopts single bus, standard I squared C communication mode.Standard single bus interface makes system integration easy and fast.The super small volume, extremely low power consumption, the signal transmission distance can reach up to 20 meters, making it the best choice for all kinds of applications and even the most demanding applications.The I squared C communication mode adopts standard communication timing, and the user can be directly attached to the I squared C communication bus, with no additional wiring and simple use. Two kinds of communication mode is used directly output after temperature compensation, humidity, temperature and the CRC check and other digital information, users need to secondary calculation of digital output, also need not to compensate the temperature humidity, accurate temperature and humidity information can be got.The two modes of communication are free to switch, users are free to choose, easy to use, and should be widely used.The product is 4 lead wire and convenient connection. Special packaging can be provided according to user's demand. AM2322 Temperature and Humidity Sensor Product Features * Super Mini Size Easy Protable * Ultra-low voltage work * Ultra-Low Power State * Excellent long-term stability * Standard And single bus output AM2322 Temperature and Humidity Sensor Range of application Hvac, dehumidifier, testing and inspection equipment, consumer goods, automotive, automatic control, data recorder, weather stations, household appliances, humidity control, medical, and other relative humidity control. AM2322 Temperature and Humidity Sensor Product highlights Completely interchangeable, the cost is low, long-term stability, relative humidity and temperature measurement, signal transmission distance long, digital signal output, accurate calibration, extremely low power consumption, standard single bus digital interface, standard I2C bus digital interface,The mode of communication is free to choose. AM2322 Temperature and Humidity Sensor Sensor performance * Humidity range: 0~99.9%RH * Temperature range: -40 ~ +80'C * Humidity Accuracy: ±2%RH * Temperature Accuracy: ±0.3'C * Humidity Repeatability: ±0.1%RH * Temperature Repeatability: ±0.2'C * Service voltage: 3.1V to 5.5V * Output signal: single bus /IIC signal
AM2322 Temperature and Humidity Sensor Product Overview AM2322 The digital temperature and humidity sensor is a kind of temperature and humidity composite sensor with the output of calibrated digital signal. The special temperature and humidity collection technology is adopted to ensure the high reliability and long-term stability of the product.The sensor includes a capacitive sensing element and a high-precision integrated temperature measurement element, which is connected to a high-performance microprocessor.The product has high quality, super fast response, strong anti-interference ability and high cost performance. AM2322 communication mode adopts single bus, standard I squared C communication mode.Standard single bus interface makes system integration easy and fast.The super small volume, extremely low power consumption, the signal transmission distance can reach up to 20 meters, making it the best choice for all kinds of applications and even the most demanding applications.The I squared C communication mode adopts standard communication timing, and the user can be directly attached to the I squared C communication bus, with no additional wiring and simple use. Two kinds of communication mode is used directly output after temperature compensation, humidity, temperature and the CRC check and other digital information, users need to secondary calculation of digital output, also need not to compensate the temperature humidity, accurate temperature and humidity information can be got.The two modes of communication are free to switch, users are free to choose, easy to use, and should be widely used.The product is 4 lead wire and convenient connection. Special packaging can be provided according to user's demand. AM2322 Temperature and Humidity Sensor Product Features * Super Mini Size Easy Portable * Ultra-low voltage work * Ultra-Low Power State * Excellent long-term stability * Standard And single bus output AM2322 Temperature and Humidity Sensor Range of application Hvac, dehumidifier, testing and inspection equipment, consumer goods, automotive, automatic control, data recorder, weather stations, household appliances, humidity control, medical, and other relative humidity control. AM2322 Temperature and Humidity Sensor Product highlights Completely interchangeable, the cost is low, long-term stability, relative humidity and temperature measurement, signal transmission distance long, digital signal output, accurate calibration, extremely low power consumption, standard single bus digital interface, standard I2C bus digital interface,The mode of communication is free to choose. AM2322 Temperature and Humidity Sensor Sensor performance * Humidity range: 0~99.9%RH * Temperature range: -40 ~ +80'C * Humidity Accuracy: ±2%RH * Temperature Accuracy: ±0.3'C * Humidity Repeatability: ±0.1%RH * Temperature Repeatability: ±0.2'C * Service voltage: 3.1V to 5.5V * Output signal: single bus /IIC signal
Based on the rugged humirel humidity sensor, GP3516 is a dedicated humidity plug and play transducer designed for OEM applications where a reliable and accurate measurement is required. Direct interface with a micro-controller is made possible with the module�??s humidity linear voltage output. The threaded end ensures proper mounting of the sensor inside te camber. GP3515 is specially suitable for humidity chambers applications. Main features Tests under harsh chemical conditions demonstrate good operation in presence of salt atmosphere, SO2 , H2S, O3, NOx , NO, CO, Softener, acids (H2SO4, HNO3, HCl), HMDS, Insecticide, Cigarette smoke . Threaded end for convenient and proper mounting. Reliability not affected by repeated condensations Full interchangeability. Better than +/-3%RH and +/-0.15°C Typical 1 to 3.6 Volt DC output for 0 to 100% RH at 5 V DC supply Humidity calibrated within +/- 3% RH @ 55% RH Ratiometric to voltage supply within the specified range Resistance to chemical and physical stresses GP3515 has circuit to protect against Electrostatic discharges upto 15 KV air discharge. GP3515 is protected against reverse polarity GP3515 is not light sensitive Additional tests under harsh chemical conditions demonstrate good operation in presence of salt atmosphere, SO 2, O 3, NO, CO,CO2, Softener, Soap, acids. Dimensions: Length: 90mm, Diameter: 19mm , Threading: M18 (Male -)
Specifications: 1) Power Supply: 5V DC 2) Electric current: 2mA (max. 5mA) 3) Temperature operating range: 20 â?? 50 0 C 4) Humidity operating range: 0 â?? 100% Rh 5) Humidity measurement range: 20 â?? 80% Rh 6) Accuracy: 5% Rh (at 25 0 C and 5 V DC) 7) Temperature Storage range: -20 to 85 0 C 8) Humidity storage range: below 85% Rh 9) Size: 34.7 x 21.6 x 10 mm 10) Polarity Protection: Not Provided -
Based on the rugged HUMIREL humidity sensor, GP3515 is a dedicated humidity and temperature plug and play transducer designed for OEM applications where a reliable and accurate measurement is required. Direct interface with a micro-controller is made possible with the moduleâ??s humidity linear voltage and direct NTC outputs. GP3515 is designed for high volume and demanding applications. Main features â?¢ Tests under harsh chemical conditions demonstrate good operation in presence of salt atmosphere, SO 2 (0.5%), H 2 S (0.5%), O 3 , NOx, NO, CO, Softener, acids (H 2 SO 4 , HNO 3 , HCl), HMDS, Insecticide, Cigarette smoke . â?¢ Product free from Lead, Cr (6+), Cd and Hg. Compliant with RoHS â?¢ Reliability not affected by repeated condensations â?¢ Full interchangeability. Better than +/-3%RH and +/-0.15°C â?¢ Typical 1 to 3.6 Volt DC output for 0 to 100% RH at 5 V DC supply â?¢ Humidity calibrated within +/- 3% RH @ 55% RH â?¢ Temperature measurement through NTC 10 kΩ +/- 1% direct output â?¢ Ratiometric to voltage supply within the specified range Maximum Ratings: Parameter Symbol Value Unit Storage Temperature T stg -40 to125 C Supply Voltage V cc 5.25 V DC V dc Humidity Operating range Rh 0 to 100 %Rh Max. output current I peak 5 mA Temperature operating range T a -40 to 110 C Max. Power P d 25 mW Electrical Characteristics: (@23C, @Vcc=5 V DC, RL -
Temperature and Relative Humidity Sensor Module Description: Based on the rugged HS1101LF humidity sensor, HTF3000LF is a dedicated humidity and temperature transducer designed for OEM applications where a reliable and accurate measurement is needed. It features a very small size for easy, cost-effective mechanical mounting. Direct interface with a micro-controller is made possible with the moduleâ??s linear frequency output. Features: * Small size product * Compliant with RoHS recommendations and most of Lead Free Soldering Process * Humidity calibrated within ±3% @55%RH at 5Vdc * Stable, proportional frequency output from 0 to 100% RH * High quality thermistor * One of the smallest humidity/temperature modules on the market * High reliability and long term stability * Not affected by water immersion * Stable characteristics with temperature * Part could be washed with distilled water Humidity Sensor Specific Features: * Instantaneous de-saturation after long periods in saturation phase * Fast response time * High resistance to chemicals * Patented solid polymer structure Temperature Sensor Specific Features: * 10kΩ ±1% NTC temperature sensor * Stable * High sensitivity APPLICATIONS: * Printers * HVAC controller PERFORMANCE SPECS Storage Temperature: -40 to 105 'C Storage Humidity: 0 to 100 % RH Supply Voltage (Peak): 16 Vdc Humidity Operating Range: 0 to 100 % RH Temperature Operating Range: -40 to 85 'C
