Hot Ff Patemperature Transmitter Instrumenting Suppliers and Manufacturers

NCS-TT108 smart temperature transmitter, using the fieldbus technology, is a new generation of smart fieldbus temperature transmitter and it is an indispensable field device for process control. NCS-TT108 transmitter integrates abundant function blocks and realizes not only general measurement function but also complicated control strategy. NCS-TT108 smart temperature transmitter supports eight-channel temperature sensor input. It applied to a variety of thermal resistance and thermocouple sensors and has wide range. Each channel support individually configure the sensor type and two-wire system and three-wire system connections of the thermal resistance. Eight channels are divided into four groups of temperature acquisition modules, with the security isolation between modules. Each temperature acquisition module has two temperature input channels. NCS-TT108 smart temperature transmitter adopt PVC fire-retardant plastic shell, which can be installed in the control room. When it is required to be installed outdoors, outdoor Aluminum box, with a water-proof body and die-cast aluminum materials, must be selected. NCS-TT108 uses digital technology. It has simple interface between field and control room, which reduces the expense of installation, operation and maintenance. NCS-TT108 supports FF, and PA protocols. It can be widely used in the petroleum, chemicals, electricity, and metallurgical industries, etc. Main features: nflexibility ------Support many types of thermal resistance and thermocouple sensors -------Thermal resistance supports 2/3 wiring connection mode ------Thermocouple can use cold end compensation function nSupport many type of protocols -----Support FF, PA protocols

NCS-TT108 smart temperature transmitter, using the fieldbus technology, is a new generation of smart fieldbus temperature transmitter and it is an indispensable field device for process control. NCS-TT108 transmitter integrates abundant function blocks and realizes not only general measurement function but also complicated control strategy. NCS-TT108 smart temperature transmitter supports eight-channel temperature sensor input. It applied to a variety of thermal resistance and thermocouple sensors and has wide range. Each channel support individually configure the sensor type and two-wire system and three-wire system connections of the thermal resistance. Eight channels are divided into four groups of temperature acquisition modules, with the security isolation between modules. Each temperature acquisition module has two temperature input channels. NCS-TT108 smart temperature transmitter adopt PVC fire-retardant plastic shell, which can be installed in the control room. When it is required to be installed outdoors, outdoor Aluminum box, with a water-proof body and die-cast aluminum materials, must be selected. NCS-TT108 uses digital technology. It has simple interface between field and control room, which reduces the expense of installation, operation and maintenance. NCS-TT108 supports FF, and PA protocols. It can be widely used in the petroleum, chemicals, electricity, and metallurgical industries, etc. Main features: nflexibility ------Support many types of thermal resistance and thermocouple sensors -------Thermal resistance supports 2/3 wiring connection mode ------Thermocouple can use cold end compensation function nSupport many type of protocols -----Support FF, PA protocols

NCS-PT105 series Smart Pressure Transmitter with advanced, mature, reliable 3151 capacitance sensors has been designed meticulously by combining advanced microprocessor technology and digital capacitance measurement technology. The powerful functions and high-speed computing capability of the microprocessor make it have excellent qualifications such as smart, high precision, high reliability, stable zero and so on. Its LCD can display many physical parameters (e.g. pressure, temperature, current and so on). It can realize the functions such as zero adjustment, range settings by key-press operation, and it is easy for field testing. NCS-PT105 series Smart Pressure Transmitter supports HART, FF, and PA protocol and can measure pressure, differential pressure, liquid level, flow, and other industrial parameters. It can be widely used in the petroleum, chemicals, electricity, and metallurgical industries, etc.. According to the type of measurable pressure: Model Pressure type NCS-PT105 SR Micro-differential pressure transmitter NCS-PT105 SG Gauge pressure transmitter NCS-PT105 SA Absolute pressure transmitter NCS-PT105 SD Differential pressure transmitter NCS-PT105 SH Differential pressure transmitter for high static pressure According to the protocol: Model Communication Protocol type NCS-PT105 H HART NCS-PT105 F FF H1 NCS-PT105 P PROFIBUS PA As a transitional communication protocol in fieldbus, HART protocol achieves digital transmission on the existing analog transmission lines, and is compatible with existing analog signal control system. Either FF H1or PROFIBUS PA is a new generation of digital communication protocol, used in field connection, and linking field devices. International Standard IEC61158-2 is used in physical layer. Therefore, either FF H1or PROFIBUS PA is fieldbus actually. As following, Smart Transmitter with HART protocol is named as HART Smart Transmitter; Smart Transmitter with FF H1 protocol is named as FF Smart Transmitter; Smart Transmitter with PROFIBUS PA protocol is named as PA Smart Transmitter, All of these (Transmitters with the three types of fieldbus protocol) are named as Smart Pressure Transmitters or Smart Transmitters. In addition, HART Smart Transmitter has passed explosion-proof certification from National Supervision and Inspection Center for Explosion Protection and Safety of Instrumentation (NEPSI).

Display readout: -1999 . +9999 Input: DC 4 .. 20 mA Temperature / Pressure / Level Output: 4 ... 20 mA Accuracy: 0.2% F.S. IP rating: IP67

Surveying gnss product, including digital sounder, gis data acquisition system, marine engineering application integrated system, GNSS receivers.

1-64 channels digital video optical, transmitter/receiver, network access products, video security surveillance solutions.

Surveying equipment, surveying tools, total station, theodolite, GNSS receivers.

Pressure transmitter, temperature transmitter, torque wrench tool.

Professional's Deluxe High Quality Acoustic Sensitivity Stethoscope for Medical Students & Doctors High Quality Hospital Medical Black Stainless Steel Stethoscope PRODUCT INFO High Quality Hot Sale Hospital Medical Black Stainless Steel Stethoscope Product Details Place of Origin: INDIA Brand Name:Sign For Safety Model Number:SFS-101A Power Source:manual Warranty:1 Year After-sale Service:Online technical support Material:Zinc alloy head Shelf Life:1years Quality Certification:ce Instrument classification:Class I Safety standard:EN 149 -2001+A1-2009 Product name:Stethoscope Certificate:CE/ ISO9001/ ISO13485 Safety standrard:EN 149 -2001+A1-2009 Color:Black Usage:Medical Test Tube:PVC (multicolor) Head:Zinc alloy Single gross weight:0.400 kg Single package size:30X14X6 cm Optional:PVC Tube Color or Put Logos Packaging Details Color Box Standard Export Carton

The 80fa flow meter is for permanent flow metering applications. Its modularity offers comprehensive configuration options to make the instrument suitable for everything from simple water flow measurements to energy flow monitoring, automated process control and product recognition. The transmitter electronics are housed in a corrosion-resistant, wall mounted enclosure and can be powered by ac or dc power supplies. By offering a wide range of input, output and communication inferfaces such as rs 485, modbus and relay, the flow meter can easily be connected to process automation systems. Features --real time data transfer --intuitive flow meter menu --heat measurement function optional --easy installation and operation --measuring temperature from 0-160 c (32 to 320 f) --ex-enclosure provided --powed by either ac & dc Specifications Flow element Working power supply: ac220v/dc8~36v Accuracy: ¡¨¹1% Max. Flow velocity: 10m/s Measuring period: 500ms (2 times per second, and 128 groups of data collected at each cycle ) Display: 10 digits, 2 lines characters displayed on the same screen Operation: 2*8 keyboard Signal output: 1 way isolated rs485 1 way isolated rs485 1 way oct Signal input: 3 way 4-20ma 2 way pt100 resistor Communication protocol:modbus protocol, fuji extension protocol Installation:external application installation Protection:transducer ip 68, mainframe ip 65 Ex-proof:exd ii bt 4 Carton package, size 41*30*15cm, weight 4kg

Pressure & Temperature Transmitters, Level Controller & Transmitters, Temperature Probes, Flowmeter, Vibration Monitoring Devices, Chart Recorders, Sensors, PLC, DCS, HMI, Measuring Instruments and Other Field Instruments..Distribute

Notice 1. All the supplied products are provided with product certificates and instructions, including product number, technical parameters, wiring diagram,factory date, etc. Please check carefully to avoid misuse. 2. Installation should check whether the field interface is connected to the product according to the connection mode and thread type of the product.The mouth is the same. If it is a threaded interface, it should be tightened slowly and sealed carefully. Torque can not be added directly to the transmitter shell, but only on the six sides of the pressure interface. 3. The wiring should be strictly in accordance with the instructions of our company. 4.This product is a precise instrument. It is forbidden to disassemble, colide,fall,throw hard or punch the drainage hole with a sharp instrument. 5. The transmitter can work by electricity, but the preheating output is stable for 30 seconds. 6. If any abnormality is found in use, the power supply should be turned off, the use should be stopped, the inspection should be carried out, or contact our technical department direct. 7.When transporting and storing, the original packaging should be restored and stored in a cool, dry and ventilated warehouse. 8.The quality assurance period is 12 months. Intelligent Operation Method 1. LCD shows the output percentage or process pressure. Press the S key to select the display percentage or pressure.Press Z key to select pressure unit KPa or Mpa when displaying pressure. 2. Press S+Z key for 8 seconds, then release it at the same time, press Z key to set the zero value; Press the S key set the range. note: this function can only be triggered once an operation. 3. Adjustments to zeros or ranges may cause changes in the displayed options, i.e.The percentage being displayed becomes pressure or KPa becomes Mpa, etc. All these changes are shown only in the display, and have no effect on the internal parameters of the transmitter, pressure detection and current output. After adjusting the zero point and range, the S and Z keys can be used to select the desired percentage or pressure. 4. Zero-setting in field pressure-free state: 30 seconds after pressing S+Z key, the display shows zero time at the same time release the two keys, that is, zero. Simulated operation method 1.Zero-setting in pressure-free condition: The potentiometer with the word "zero" on the circuit board is adjusted to zero when it is displayed on the spot.(Note: Clockwise increase, counterclockwise decrease) 2.The potentiometer marked "range" on the circuit board can not be adjusted without standard pressure, so as to avoid the disorder of measurement range.

CR-602 series high temperature high pressure liquid level sensor is suitable for the continuous measurement of liquid(things) level of high pressure equipment,container in industrial production process.Transmit output 4-20mA direct standard signal. It can be directly used in connecting use and automatic control of electric â?¢ type instrument and computer. The tube is made of special material which make it can work under 250 for long time. Special designed automatic sealing structure , the greater the pressure the sealing stricter.safely avoid medium leakage. The core components of the product are converted into standard electrical signals (generally 4-20mA) by using advanced radio frequency capacitance detection circuit to conduct precise temperature compensation and linear correction through 16-bit single-chip microcomputer. 485 communication protocol can be used in system configuration. All series of transmitters have the function of on-site calibration. Users can press the button to carry out zero point and range, so as to meet the different requirements of various complex places. The product conforms to GB3836.4-2000ã??Electrical equipment for explosive gas environment part 4: intrinsically safe type Iã??and GB3638.1-2000ã??Electrical equipment in explosive gas environment part 1: general requirementsã??explosion-proof mark:Exdâ?¡C T6, it is suitable for 0,1,2 zones which contains â?¡A-â?¡C category,T1ï½?T6 group explosive gas mixture.This product has also been awarded explosion-proof certificate after testing qualified through national explosion-proof inspection center. Measuring scopeï¼?0.01ï½?10m Precision: 0.5 Pressure scope: -0.1MPaï½?32MPa Tube temperature resistant: -50ï½?200 Tube diameterï¼?Ï?8 Tube Materialï¼?PTFE Storage temperatureï¼?-55ï½?+125 Output signal: 4ï½?20mAã??4-20mA with HART communication , 485 communication with 4-20mA Supply power: 12-28VDC (intrinsic safety type needs to be powered by safety grid) Fixed wayï¼?threaded installationï¼?M20*1.5 M27*2 Flange installation: DN15,DN25,DN40,DN50,DN80, special requirements can be customized. Measuring tube material: 304ã??316 stainless steelã??1Gr18Ni19Tior PTFE Explosion-proofï¼?intrinsic safety Exiaâ?¡C T6 explosion-proof Exdâ?¡C T5 Protection gradeï¼?IP67 Intrinsic safety parameterï¼?Uiï¼?28VDCï¼?Iiï¼?93mAï¼?Piï¼?0.65Wï¼?Ciï¼?0.042ufï¼? Liï¼?0mH

General Description The series of pressure transducers use imported high-quality pressure sensors and special integrated modules, through fine temperature, zero, full range, and non-linear compensation to achieve accurate measurement and transmission of pressure changes in liquid, gas, steam and other media. Technical Index Measuring medium: liquid, gas, steam Pressure range: -0.1MPA~0~60MPA Accuracy grade: ±0.2%FS, ±0.5%FS Stability: â?¤0.2%FS/year Temperature drift: â?¤0.02%FS/(range 0~70) Environment temperature: -20+85 Storage temperature: -20+85 Output signal: 4-20mA or 1-5VDC Supply voltage: 12-40VDC Allow overload: two times the quota voltage Explosiveproof grade: intrinsically safeia II C T6 flameproof dII C T6 Wetware material: 316 stainless steel and 1Gr18Ni9Ti Shell material: die casting alloy aluminum,surface epoxy spraying Pressure interface: M20X1.5 Weight: ordinary 0.75kg, with on-site instructions 1kg Structure Type x1 Connection x2x31 x4 The link mode and output signal of the compact tranmitter are as follows: Two-wire system: 1 Positive power supply 2 Negative power supply 3 Empty 4 Shell Three wire system: 1 positive power supply 2 Negative power supply (Negative sharing with signals) 3 Signal+ 4 Shell x5 The connection mode of aviation plug transmitter is as follows: Two-wire system(direct outlet type) 1 Red wire connection positive power supply 2 Black wire connection negative power supply Notice 1. All the supplied products are provided with product certificates and instructions, including product number, technical parameters, wiring diagram,factory date, etc. Please check carefully to avoid misuse. 2. Installation should check whether the field interface is connected to the product according to the connection mode and thread type of the product.The mouth is the same. If it is a threaded interface, it should be tightened slowly and sealed carefully. Torque can not be added directly to the transmitter shell, but only on the six sides of the pressure interface. 3. The wiring should be strictly in accordance with the instructions of our company. 4.This product is a precise instrument. It is forbidden to disassemble, colide,fall,throw hard or punch the drainage hole with a sharp instrument. 5. The transmitter can work by electricity, but the preheating output is stable for 30 seconds. 6. If any abnormality is found in use, the power supply should be turned off, the use should be stopped, the inspection should be carried out, or contact our technical department direct. 7.When transporting and storing, the original packaging should be restored and stored in a cool, dry and ventilated warehouse. 8.The quality assurance period is 12 months.

CR-606 fuel level transmitter (sensor) working principle The sensing part of the CR-606 series capacitive fuel level sensor is a coaxial container. When the fuel enters the container, the capacitance changes between the sensor housing and the sensing electrode. This change is converted by the circuit and is accurate. Linear and temperature compensated, output 4-20mA standard signal is supplied to the display instrument. CR-606 fuel level transmitter (sensor) performance indicators Detection range: 0.05-5m Accuracy: 0.1, 0.2, 0.5 Pressure range: -0.1MPa-32MPa Probe temperature resistance: -50-250 Output signal: 4-20mA, 4-20mA superimposed HART communication, 485 communication, CAN bus communication Power supply voltage: 12-28VDC (intrinsic safety type needs to be powered by safety barrier) Fixed mode: threaded mounting M20�1.5, M27�2, M18�1.5, M16�1 Flange mounting DN25, DN40, DN50. Special specifications can be customized according to requirements Probe diameter: Φ12, Φ16, Φ25 Explosion-proof grade: intrinsic safety ExiaIICT6 flameproof ExdIICT5 Protection level: IP65 Intrinsic safety parameters: Ui: 28VDC, Ii: 93mA, Pi: 0.65W, Ci: 0.042uf, Li: 0mH CR-606 fuel level transmitter (sensor) for occasions CR-6062 compact fuel level transmitter (sensor) industrial grade, suitable for 5MPA or below, temperature below 200, viscosity is not high fuel measurement, can be added with various protocols of communication CR-6061 automotive-specific fuel level transmitter (sensor) is suitable for the measurement of various fuel under normal temperature and pressure. The output damping time is adjustable from 30 to 180s. It can be equipped with 485 communication. CR-6062 standard fuel level transmitter (sensor) industrial grade, suitable for measurement below 5MPA, viscous fuel quality below 200, can be added with various protocol communication CR-6063 high temperature and high pressure type fuel level transmitter (sensor) industrial grade, suitable for below 32MPA, temperature measurement below 250, can be attached to various protocols CR-6061 universal fuel level transmitter (sensor) is suitable for measuring various fuel and hydraulic fuel under normal temperature and pressure, and can be equipped with 485 communication.

Short Description: CR-605 series universal liquid level gauge is suitable for measurement of sewage, oil (sheathed tube), high viscosity, easy to crystallize, easy to adhere, changeable medium , foam or aerosol impact and other diffcult to measure situation. The whole machine does not have any movable or elastic parts with advantages of impact resistance, convenient installation, high reliability, high precision and good cost performance. It can replace the RF admittance, radar, ultrasonic, magnetostrictive and other level gauges to make accurate measurements. The core components use advanced RF capacitance sensing circuit to convert to standard electric signal after precision temperature compensate and linear correction through inner processor. The product uses tomography technology to automatically detect the dielectric constant and temperature changes of the medium, automatically calibrate, and automatically adapt to the measured medium. In any case, you can adapt to different measurement requirements in complex locations without recalibration. And it has excellent resistance to hanging materials, anti-condensation, anti-bubble and other super adaptability. The products own protection rating is IP68, which enables long-term stable measurement in harsh environments. Advantagesï¼? â?²Automatic adaptation, automatic calibration, long-term stable output true height value. â?²Anti-hanging material, anti-condensation, anti-bubble and other anti-pollution ability. â?²The structure is simple without any movable parts, high reliability and low maintenance. â?²A variety of signal outputs are available for easy access to different systems. â?²It is not affected by factors such as temperature, specific gravity and pressure of the liquid to be tested. â?²High temperature resistance â?¤150°C, high pressure resistance â?¤2.5MPa, long life. â?²Good sealing performance, protection class IP68 (except CR6052). â?²Perfect overcurrent, overvoltage, and power polarity protection measures. Performance indexï¼? Measurement rangeï¼?0.01~10m Precision: 0.5ã??1 Ambient temperature: -20~60 Storage temperatureï¼?-40ï½?+85 Probe temperature resistance: -40~150 Wet contact material: 304 stainless steel/PTFE Supply voltage: 12ï½?28VDC Power consumptionï¼?â?¤30mW Pressure range: -0.1~2.5MPa Long-term stability:â?¤0.2%FS/year Output signal: 4ï½?20mA/0-5V/RS485/CAN communication Fixed way: thread mounting M27Ã?2ï¼?M33Ã?2ï¼?G2 thread Temperature driftï¼?â?¤0.02%FS/ï¼?0ï½?70ï¼? Explosion-proof parameter: intrinsic safety Exiaâ?¡C T6 Ga IP gradeï¼?IP67/IP68 Intrinsic safety parameter:Ui:28VDC,Ii:93mA,Pi:0.65W,Ci:0.02uf, Li:0.1mH

Short Description: CR-607 series hygienic liquid level transmitter is a special instrument customized for the food and pharmaceutical, beverage processing, brewery industry, biological products and other industries. Using standard sanitary stainless steel quick couplings and integrated PTFE probe structure, there is no sanitary dead spots on the whole product and the medium contact parts , which is the ideal product for measuring liquid level in related industries. The whole machine does not have any movable or elastic parts, features are impact resistance, convenient installation, high reliability, high precision and good cost performance. It is the most ideal product for measuring liquid level in related industries. The CR6072 product adds automatic compensation and automatic calibration function, which reduces the maintenance workload of field personnel. The product complies with GB3836.4-2010