HONGEN 5L/min Membrane Oxygen Generator HONGEN 5L/min Membrane Oxygen Generator was a smaller capacity design of Oxygen Generator,despite the smaller capacity design it was built upon a legacy of reliable,field-proven concentrator models. HONGEN 5 Liter Oxygen Concentrator was updated with enhanced quality, durability, performance and simplicity in mind.This robust oxygen concentrator offers just the right balance of cool and quiet. The designed was specify on slim concept to reduce the space consumption of the user and bring convenience to household, clinic and hostipal usage. Specification: Technical parameters: ambient humidity: 95% RH ambient temperature:-30 ~+40 Technical parameters: operating voltage: AC220 + 20V/50Hz rated power: 50 W main engine weight: 3.1 kg working noise: 42dB(A) oxygen concentration: 90 3+ oxygen flow rate: ï½?5 (N)L/min oxygen production principle:MAS membrane air separation
1. Current overload or line surge shutdown 2. High temperature compressor shutdown. 3. High pressure alarm shutdown. 4. Low pressure alarm shutdown. 5. Low oxygen cocentrator alarm. Oxygen concentrator: 0.5-5L/min Purity: 95%+_3% Working system Continuous Power Supply AC230V.50Hz/AC220V.60HZ AC120V.60Hz Power: 390VA Net Weight: 16kg( Gross weight: 18.5kgs) Warranty: Long-life compressor designed for 1000 hours of maintenance-free use. Size: 33*26*54cm
HONGEN 3L/min Membrane Protable Oxygen Generator HONGEN 3L/min Membrane Protable Oxygen Generator was designed with a extra slim concept with the reduction of weight to 1.3KG, which highly reduced the weight and space consumption of the user. HONGEN 3L/min Membrane Protable Oxygen Generator was also designed with LED Panel for easier control and display. Therefore, it was integrated with build-in battery which allow it to last up to 8 hours, to bring convenience for on the go usage. Nevertheless, it had been strictly manufactured based on a high quality foundation which makes them to maintain the enhanced quality, durability, performance and simplicity in mind comparing to the powerpluged Oxygen Generator. The design was specify on portable and durability best suitable for indoor and outdoor usage. Specification: Technical parameters: ambient humidity: 95% RH ambient temperature:-30 ~+40 Technical parameters: operating voltage: DC12 rated power: 15W main engine weight: 1.3 kg working noise: 42dB(A) oxygen concentration: 90 +3 oxygen flow rate: 3(N)L/min oxygen production principle:MAS membrane air separation
HONGEN 1L/min Membrane Protable Oxygen Generator HONGEN 1L/min Membrane Protable Oxygen Generator was designed in the way of portability with the reduction of weight to 870g, which highly reduced the weight and space consumption of the user. HONGEN 1L/min Membrane Protable Oxygen Generator was integrated with build-in battery which allow it to last up to 4 hours. The unique and simple portable design allow easier usage and portability for the user, which are best suitable for outdoor usage and travellers. Specification: 1L/min membrane oxygen generator Technical parameters: ambient humidity: 5% RH ambient temperature: -30 ~+40 Technical parameters: operating voltage: DC12 rated power: 10W main engine weight: 870g working noise: 42dB(A) oxygen concentration: 90 + 3oxygen flow rate: 1(N)L/min oxygen production principle:MAS membrane air separation
HONGEN 10L/min Membrane Oxygen Generator HONGEN 10L/min Membrane Oxygen Generator built upon a legacy of reliable,field-proven concentrator models. HONGEN 10 Liter Oxygen Concentrator was updated with enhanced quality, durability, performance and simplicity in mind.This robust oxygen concentrator offers just the right balance of cool and quiet. The designed was specify on slim concept to reduce the space consumption of the user and bring convenience to household, clinic and hostipal usage. Specification: Technical parameters: ambient humidity: 95% RH ambient temperature:-30 ~+40 Technical parameters operating voltage: AC220 + 20V/50Hz rated power: 50 W main engine weight: 3.6 kg working noise: 42dB(A) oxygen concentration: 90 + 3 oxygen flow rate: 10 (N)L/min oxygen production principle:MAS membrane air separation
HONGEN 5L Medical Oxygen Generator was designed in the way of slim and compact for easy placement, usage and ease of maintenance is perfect for care facilities and professional settings as well. It's provided an advanced from the hospitals with surgical activities and intensive care units. It's produced a high and stable medical oxygen quality at 90% +/- 3%. PARAMETER - RATEED VOLTAGE/FREQUENCY : ~220V �± 10% / 50Hz �± 2% - OXYGEN FLOW : The nominal pressure at the outlet is 0 and (0-5) L / Min at 70kpa, which can be adjusted continuously with allowable error is �± 10% - OXYGEN CONCENTRATION PURITY : 90% �± 3% - MAXIMUM OUTLET PRESSURE : Under the condition of rated flow, the maximum outlet pressure is 40kpa �± 10% - DISCHARGE PRESSURE OF COMPRESSPR SAFETY VALVE : 250kpa �± 50kpa - NOISE OF THE WHOLE MACHINE : â?¤50dB(A) - MAXIMUM ATOMIZATION RATE : â?¥(). 1 mL/Min - INPUT POWER : 400W - DIMENSION : L*W*H 530 x 262 x 426mm - NET WEIGHT : 15.0KG - ELECTRICAL CLASSIFICATION : CLASS I TYPE B - GROSS WEIGHT : 13.2 KG - DEGREE OF PROTECTION AGAINST HARMFUL LIQUID : Common Equipment ( Closed Equipment without liquid Inlet) - WORKING SYSTEM : Continuous Operation - FUSE : R3-54B
General Purpose Fresh Coir Block (Processed & Compressed Coir) Coir pith blocks ensure high oxygen levels and therefore good drainage properties. They reduce the dormancy period of seeds and promote early sporting in almost all flowering plants and vegetable crops, We can supply coir blocks as Fresh Coir Blocks for vegetables/fruits and High Drain Rose Mix Coir Blocks specially designed to be used with Roses. Can be supplied in different weights, sizes or as per buyer’s requirements. Please contact us for more details and price quotations Advantages of Fresh Coir Blocks: Designed for vegetable and fruit plants Faster binding of soil Resistant to mold & rot; no chemical treatments needed Great air and water permeability Holds the seeds/saplings in place Excellent medium for quick vegetation No removal costs; Naturally degrades over a period of 2 to 5 years time Promotes deep rooting of plants Provides nutrients Easy to install Eco-friendly We can make 5 kg and 15 kg blocks.
Technique Parameter Oxygen flow rate .. 1L-5L Oxygen concentration .. 93% + 3% Rated voltage / Power .. AC220V + 22V ,50Hz + 1Hz Material .. Plastic Oxygen concentration .. 0.5-3L/min 90% Flow fluctuation .. 0.7L/min Atomization amount .. 0.2ml/min environment temperature .. 5-40 humidity range .. 80% Atmospheric pressure range .. 86kpa -- 106kpa Size .. L448*W245*H492 Weight .. 14.5g 1. Headset type components (optional) 2. Nasal tube assembly (optional) 3. Atomizer assembly
HONGEN 10L Medical Oxygen Generator was designed to provide optimal oxygen delivery for patients with varying flow requirements. This is high performing compact oxygen generator, designed to supply for healthcare facilities with little or no access to medical oxygen, or for back-up supply in operation theaters and ICUs. Descriptionï¼? PARAMETER - RATEED VOLTAGE/FREQUENCY : ~220V �± 10% / 50Hz �± 2% - OXYGEN FLOW : In case of the normal outlet pressure is zero and 70kPa. It is continuously adjustable at (0-10)L/ Min and the allowable error is �± 10% - OXYGEN CONCENTRATION PURITY : 93% �± 3% - MAXIMUM OUTLET PRESSURE : Under rated flow conditions, the maximum outlet pressure is 40kpa �± 10% - DISCHARGE PRESSURE OF COMPRESSPR SAFETY VALVE : 250kpa �± 50kpa - NOISE OF THE WHOLE MACHINE : â?¤60dB(A) - INPUT POWER :
Technique Parameter Oxygen flow rate .. 1L-5L Oxygen concentration .. 93% + 3% Rated voltage / Power .. AC220+V 22V ,50Hz + 1Hz Material .. Plastic Oxygen concentration .. 0.5-3L/min + 90% Flow fluctuation .. 0.7L/min Atomization amount .. + 0.2ml/min environment temperature .. 5-40 humidity range .. 80% Atmospheric pressure range .86kpa -- 106kpa Size .. L448*W245*H492 Weight .. 14.5g 1. Headset type components (optional) 2. Nasal tube assembly (optional) 3. Atomizer assembly
Potassium Monopersulfate compound, a white, free flowing crystalline granule, is non-toxic, odorless, and easily soluble in water. It is an efficient, environmentally friendly, and multifunctional acidic oxidant. General Information Product Name Potassium Monopersulfate compound CAS 70693-62-8 Chemical formula 2KHSO5 KHSO4 K2SO4 Molecular weight 614.7 Specification Appearance White, free flowing granule Available Oxygen, % 4.5 KHSO5,  % 42.8 Loss on Drying  % 0.15 Bulk Density, g/L 0.80 pH (10g/L,25 C) 2.0 .4 Sieve Residue on 75 m test sieve, % 90.0 Packaging Product is packaged in plastic woven bags lined with polyethylene film, with a net weight of 20kg/bag or 50kg, or the packaging form and net content can be determined through negotiation according to customer requirements. Storage Store in a cool and well ventilated warehouse to prevent exposure to sunlight, rain, and moisture. Prohibit mixing with reducing substances for storage.
Commodity:Sodium persulfate Molecular Formula : Na2S2O8 Molecular weight : 238.13 Description Sodium persulfate is a white,crystalline,odourless salt.It is used as initiator for the Polymerization of monomers and as a strong oxidizing agent in many applications.It has the particular advantage of being almost non - hygroscopic,of having a particularly good storage stability as a result of its extremely high purity and of being easy and safe to handle. Transportation Road/Rail transport : GGVS,GGVE,ADR,RID/CLASS 5.1 Sea transport : GGV Sea/IMDG code : CLASS 5.1 Page 5185,UN no.1505 Water hazards class 1(slight water hazard) All information is given in good faith,but without warranty,since the conditions of use are outside our control. Verification by the user is recommended.Freedom from patent restriction cannot be assumed. Package (1) In 25kgs net multiple paper bags with one PE bag inner (2) In 25kgs net PE bags (3) In 25kgs net woven bags with two PE bags inner (4) In 1000kgs net big woven bags with one PE bag inner The above package is also with a pallet 1000kgs each. Storage NPS(SPS) is not combustible but assists combustion materials due to release of oxygen.Provided it is stored under appropriate condition.It must be stored dry in closed containers and protected from direct sunlight,heat and humidity.Impurities such as dirt,rust or traces of metal and reductants may cause catalytic decomposition.The product as supplied or in solution needs to be handled with appropriate care.The eye,skin and clothes must be protected when working with NPS(SPS) as damp powder or aqueous solution has a bleaching and slightly corroding effect. Application Polymerization : Initiator for the emulsion or solution Polymerization of acrylic monomers,vinyl acetate,vinyl chloride etc.and for the emulsion co-polymerization of styrene,acrylonitrile,butadiene etc. Metal treatment : Treatment of metal surfaces(e.g. in the manufacture of semiconductors; cleaning and etching of printed circuits),activation of copper and aluminium surfaces. Cosmetics : Essential component of bleaching formulations. Paper : modification of starch,repulping of wet - strength paper. Textile : Desizing agent and bleach activator - particularly for cold bleaching.(i.e.bleaching of Jeans). Others : - Chemical synthesis - Water treatment(decontamination) - Waste gas treatment,oxidative degradation of harmful substances(e.g.Hg) - Disinfectant ITEMS SPECIFICATIONS Appearance white crystalline salt Assay 99.0% w/w min Active oxygen 6.65% w/w min Chloride and chlorate(as CL) 0.005% w/w max Ammonia (NH4) 0.05% w/w max Manganese(Mn) 0.0001% w/w max Iron(Fe) 0.001% w/w max Heavy metals(as Pb) 0.001% w/w max Moisture 0.05% w/w max Decomposition of the product as supplied at above 65C Recommended storage temperature Normal Temperature Storage stability as from date of delivery 12 months
The popular portable oxygen machine car oxygen concentrator adjustable oxygen-concentrator Intelligent self-checking system with error code showing in LCD Super low noise 24 Hours Continuous Working Long lifespan of Molecular Sieves
Specification: Free Fatty Acids (% As Palmitic) : 5.0% Max. Moisture And Impurities (AOCS Ca 2c-25) : 0.1-0.25% Max. IODINE VALUE (Wijis) (AOCS Cd 1-25) : 50-55 Min. SLIP MELTING POINT (AOCS Cc3-25) : 33-39 C Max. COLOUR (Lovibond 5.25 cell) : 3.5R/3.5Y Max. DOBI : 2.31 Min Purity and freshness are the highlights of Crude Palm Oil, which we make available. This Crude Palm Oil is processed hygienically as per the set rules and regulations. We are rated as a dependable Manufacturer and Exporter of Crude Palm Oil. Packing Size: 1) PET Bottle 0.25L, 0.50L, 1L, 2L, 3L, 5L 2) HDPE Jerry Can 1L, 2L, 3L, 5L, 8L, 10L, 16L, 18L, 20L, 25L 3) Big Mouth HDPE Jerry Can 10L, 16L, 18L 4) Tin Can 16L, 18L, 20L 5) Steel Drum 190kgs 6) Plastic Drum 190kgs 7) Bag In Box 20L 8) Flexi Tank 21MT Quality:CP6, CP8, CP10
FH SERIES OF PRODUCTS: FH products are Pure nonionic derived the endosperm of guar polysaccharide (Cyamopsos tetragonolobus). The products are unique with ultra-high viscosity with fastest hydration characteristics as shown in Figure 1 below. Also, when added with other drilling components, to seawater, a KCl solution or other aqueous system, the product suspension disperses readily without lumping, even under low-shear conditions generating most of its full viscosity within just a few minutes. PRODUCT COMPATIBILITY: FH series of products are compatible with most of the chemicals and auxiliaries used in drilling operations. However, the products are not compatible with Arabic and Crystal gums. Also, in presence of borates they form elastic gel. PRODUCT APPLICATIONS: FH series of products are natural, high viscosity, fast hydrating non-Newtonian hydrocolloids with suitable cross linking components in diesel slurries and are versatile for continuous mix applications, where extremely fast hydration and subsequent viscosity development is required. They are excellent viscosifiers, stabilizers, thickeners and suspending agent for use in oil-drilling, workover fluids and several other oilfield applications like hydraulic fracturing, oil well stimulation, mud drilling, oil well capping, flocculent and liquid shoring etc. The product is used as a surfactant; synthetic polymer and deformer ideally suited for all rheological requirements of water based and brine based drilling fluids. Specifications:- PRODUCT : FH-35 FH-38 FH-42 CAS No. : 9000-30-0 9000-30-0 9000-30-0 Granulation : FINE FINE FINE APPEARANCE : OFF WHITE POWDER MOISTURE : 8% Max. 8% Max. 8% Max. PROTEIN (N X 6.25) : 5.0% Max 5.0% Max 5.0% Max ASH : 1.5% Max. 1.5% Max. 1.5% Max. ACID INSOLUBLE RESIDUE (A.I.R.) : 3% Max. 3% Max. 3% Max. CARBOHYDRATE (incl gum by difference) : 82% Min 82% Min 82% Min pH (1% Solution) : 5.5 ? 6.5 5.5 ? 6.5 5.5 ? 6.5 VISCOSITY : (0.48% Product in 2% KCL Sol. 2.5 mins mix @1500 RPM in waring blender) Fann 35sa Viscometer at 300 RPM, 25�C 3 Mins : 35 3 Min:38 3 Mins : 42 5 Mins : 37 5 Mins : 39 5 Mins : 43 30 Mins : 39 30 Mins : 42 30 Mins : 45 60 Mins : 40 60 Mins : 43 60 Mins : 47
Specifications Type Sponge Iron Material Pure Iron Color Bright Grey Packaging Loose Ash Content 5% moisture 5% Ash 1 % Max Application Melting Purpose in steel industry Form Granules Features Accurate composition Speciality Best quality Additional Information Product Code 72031000 Min. Order Quantity 50 Metric Ton Port Hazira Payment Terms L/C Delivery Time Immediate Packaging Details loose form Sale offer ( HBI SPONGE IRON FINES ) This material generate from gas based plant no S,C,P. Fe-T 69-72 and Fe-M 60+-2%