1. Follow the specifications: ASTM D4945 Standard Test Method for High-Strain Dynamic Testing of Piles JGJ106-2003 (China) Technical code for testing of building foundation piles 2. Physical (1) Size: 62 *172 * 225 mm (2) Weight: 1.7 kg (3) 8 inch and high brightness color LCD touch screen (4) Temperature range: Operating: 0° to 40° C; Storage: -20° to 65° C (5) The cables and connectors are suitable for PDA 3. Technical (1) HPT used for determining the pile bearing capacity and pile integrity. (2) It can be used for pile driving monitoring and the cast-in-place pile test. (3) Sampling frequency is Optional of 10 kHz, 20 kHz, 30 kHz and 40 kHz. (4) Sampling points are optional of 1024, 2048 and 4096. Maximum sampling time is up to 400 ms (5) Before test the two accelerometers and two strain transducers are self-checked automatically, determine whether the system is in normal state. (6) Automatically check the static strain deviation of the strain transducer during installation and adjusted to zero before blow. (7) Test data exported through the external u-disk (8) During test every blow can be saved automatically (9) Storage capacity of more than ten thousands blows. (10) HPT can be used for pile driving monitoring and the cast-in-place pile (11) HPT data can save as *.X01(used for PDA-W) (12) The main cable and connecting cable are compatible with the PDA. (13) Built-in lithium battery can be used more than 5 hours continuously. (14) PDAR program carry on CASE method analysis. (15) RCAPWAP program carry on match analysis automatically or manually.
1. Follow the specifications: ASTM D4945 Standard Test Method for High-Strain Dynamic Testing of Piles JGJ106-2003 (China) Technical code for testing of building foundation piles 2. Physical (1) Size: 62 *172 * 225 mm (2) Weight: 1.7 kg (3) 8 inch and high brightness color LCD touch screen (4) Temperature range: Operating: 0° to 40° C; Storage: -20° to 65° C (5) The cables and connectors are suitable for PDA 3. Technical (1) HPT used for determining the pile bearing capacity and pile integrity. (2) It can be used for pile driving monitoring and the cast-in-place pile test. (3) Sampling frequency is Optional of 10 kHz, 20 kHz, 30 kHz and 40 kHz. (4) Sampling points are optional of 1024, 2048 and 4096. Maximum sampling time is up to 400 ms (5) Before test the two accelerometers and two strain transducers are self-checked automatically, determine whether the system is in normal state. (6) Automatically check the static strain deviation of the strain transducer during installation and adjusted to zero before blow. (7) Test data exported through the external u-disk (8) During test every blow can be saved automatically (9) Storage capacity of more than ten thousands blows. (10) HPT can be used for pile driving monitoring and the cast-in-place pile (11) HPT data can save as *.X01(used for PDA-W) (12) The main cable and connecting cable are compatible with the PDA. (13) Built-in lithium battery can be used more than 5 hours continuously. (14) PDAR program carry on CASE method analysis. (15) RCAPWAP program carry on match analysis automatically or manually.
1. Follow the specifications: ASTM D5882 Standard Test Method for Low Strain Integrity Testing of Piles JGJ106-2003 (China) Technical code for testing of building foundation piles 2. Parameters:: 1). Size: 62 * 172 * 225 mm. 2). Weight: 2.0 kg. 3). High-contrast touch screen display. 4). Temperature range: Operating Range: 0° to 40° C; Storage Range: -20° to 65° C. 5). Powered by internal battery (6 hours duration). 3. Functional: 1). The LPT-E is used for Integrity pile testing and judging defect position 2). Automatic data storage 3). Signal amplification capability 4). Data can be averaged over a variable number of blows. 5). Variable signal amplification over time 6). 24-bit A/D converter 7). Sample size: 4k 8). Sample Frequency: 48kHz, 96 kHz,144 kHz
1. Follow the specifications: ASTM D5882 Standard Test Method for Low Strain Integrity Testing of Piles JGJ106-2003 (China) Technical code for testing of building foundation piles 2. Parameters:: 1). Size: 62 * 172 * 225 mm. 2). Weight: 2.0 kg. 3). High-contrast touch screen display. 4). Temperature range: Operating Range: 0° to 40° C; Storage Range: -20° to 65° C. 5). Powered by internal battery (6 hours duration). 3. Functional: 1). The LPT-E is used for Integrity pile testing and judging defect position 2). Automatic data storage 3). Signal amplification capability 4). Data can be averaged over a variable number of blows. 5). Variable signal amplification over time 6). 24-bit A/D converter 7). Sample size: 4k 8). Sample Frequency: 48kHz, 96 kHz,144 kHz
Digital HD Borehole Camera is the second generation of borehole camera which designed by our company. Digital HD camera technology can totally replace the analog  signal camera, 2 million pixel video resolution enhance the borehole camera clearance. The camera can recognize the wall damages, defects, fissures, and falling objects inside well, real time collection and storage of dual video and shoot by matched software, also can provide the relevant testing report according to customer requirement.
The Borehole Camera is a special instrument for well testing. The instrument uses the latest television camera technology, The various states of the lower well wall can be clearly reflected on the monitor on the ground, and for the image can be saved on the disk with video recording equipment or microcomputer.Thus,it provides reliable basis for analyzing various geological conditions in the mine. The instrument is suitable for engineering geology, hydrogeology, geotechnical engineering, mining and petroleum geology and other industries.The instrument can be used to detect fissure, dislocation, falling objects, blockage of filter pipe hole and the position of fluid sand, etc. The instrument can also observe the bedrock fissures and development state as well as the size and position of karst caves and other geological conditions in bedrock area
According to: Technique Regulation of Concrete Defect Detection with Ultrasonic CECS21: 2000 Depth measurement principle When vibration energy transmits through the concrete and passes the crack, the vibrate energy will be diffracted at the point of the crack, whose diffraction angle has geometrical relationship with the crack depth. DJCS-05 crack depth measurement instrument adopts this geometrical between the diffraction angle and depth to realize high precision depth measurement. Feature and Specification Easily operation: Start measure when turn on, simply press to finish testing. Result Intuition: No wave speed test and calculate to display the crack depth directly Data processing: Data can transfer to PC, and then generate test report rapidly. Depth scale: 10-350mm Test precision: 5% Data storage: 10600 depth data Display: 4” Resolution 160*128 Power supply: 9VDC (6 AA battery) Work environment: Temperature -5~40centigrade; Humidity 85% Size: 220*180*80mm Weight: 1000g
Purpose SYQ61 concrete strength tester is used to test compressive strength of concrete by two ways: rebound and ultrasonic-rebound method. Also, it can be used to test sound time and speed in concrete. Specification Technical specification for inspection of concrete compressive strength by rebound method (JGJ/T23-2011) Technical specification for detecting strength of concrete by ultrasonic-rebound combine method (CECS02:2005) Performance 1. Multi-function for testing compressive strength of concrete. It is used to test the compressive strength of concrete by rebound method and ultrasonic-rebound method. 2. Get the compressive strength value of concrete by ultrasonic-rebound method in one instrument. It need two instruments usually, one to test sound speed in concrete, the other to test rebound value. 3. Can save test date. This is convenient for laborer data management. 4. Real USB transmission. Data can be transmitted to computer for future process and analysis. 5. Powerful data process and analysis software in windows. Test data can be export to word or excel for future process and analysis. Technical Data 1. Permissible sound time error: +/- 0.1µs 2. Sensor frequency: 50KHz 3. Rebound kinetic energy: 2.207J 4. Rebound springs Rigidity: 785.0+/-40.0(N/m) 5. Rebound bar impact length: 75.0+/- 0.3 mm 6. Rebound value permission error: =< +/-1 7. Average rebound value on Calibration anvil: 80+/-2 8. Temperature: -4°C ~ +40°C; 9. LCD screen: 160*128(10×8cm) 10. Power: 6 dry cells, work more than 10 times 11. Size: 205mm*173mm*86mm 12. Weight: 850g
Specification Technology code for testing of building foundation piles JGJ106-2003 Technical specification of dynamic pile tests for highway engineering JTG/TF81-01-2004 Technology specification for inspection of concrete defects by ultrasonic method CECS 21:2000 Technical specification for detecting strength of concrete by ultrasonic-rebound combine method CECS 02:2005 Technical specification for geotechnical investigation method GB 50021-2001 Purpose Testing building foundation piles by crosshole ultrasonic wave method . Inspecting concrete defects by ultrasonic method, such as uncompacted place, cellular hole area Detecting concrete strength by ultrasonic-rebound combined method Detecting concrete crack depth by ultrasonic method Detecting the wall defects of the hole by one transmitter and two receivers Detecting the strength performance of geotechnical investigation, rock, concrete, etc Performance Fast, precise and automatic to judge the sound parameters. Real-time wave display to assure test efficiency Graphically display the test data, the user can view result directly. Can connect with the test hammer directly to detect the concrete strength. The function has been applied for national patent. Can receive signal with strong sensitivity more than 10m without defects in concrete. The host can supply energy to transducer without external power. Standard USB storage with big capacity Interior lithium battery can supply working power more than 6 hours. And more than 12hours combined with external lithium battery. Portable, small and light apparatus(1.75kg) Extending function to test concrete thickness by impact-echo method Professional and powerful analysis software on Windows system can output the data to Excel or word for advanced analysis.
Purpose SYR51+ rebar Location system is used to test rebar diameter, distribution, coating thickness in concrete. Specification JGJ/T152-2008 Performance Longer service life of the Connector Clip: The instrument has long service life because of using Lemo Connector Clip which comes from Swiss and uses for aircraft industry. Good quality of signal cable: The signal cable has long service life because of its flexible and substance. High precision and stability: The instrument can locate the steel-bar accurately and quickly. Longer service life of the sensor: Improve the service life by paste abrasion resistance allowance bottom of the sensor Single sensor: No-change sensor in test, switching between high and low test range can assure the precision of test data and the test depth. Display test information real-time: Display the test data directly to avoid man-made errors. Grid and section scan mode: Instrument can display steel bar distribution and scan steel bar without concrete boundary limited. Three-wheel steel-bar scan system: The system can assure scan path along line and the precision of test data. Powerful Windows data process and analysis software: Software can display analysis result by diagram. Test data can be export to word or Excel easily.
Purpose The instrument is used to test the degree of steel-bar corrosion in electrochemical method. Specification GB50204-2002 Performance 1. Two test mode. The potentiometry and gradient method is used to test steel-bar corrosion which fit for different working field. 2. Permanent reference electrode. Saturated CuSO4 solution is sealed up completely in reference electrode. Field test keeps clean, simple and pollution-free operations. 3. Automatic measure environmental temperature. Instrument design to contain a measure environmental temperature module, it can measure, record and display environmental temperature quickly no thermometers required. 4. Can save test date. Convenient for laborer data management. 5. Display test result intuitively. Display test result used icon mode, The icon color is more dark, the steel-bar corrosion is more serious. User can observe the corrosion degree intuitively. 6. Real USB transmission. Data can be transmitted to computer for future process and analysis. 7. Powerful data process and analysis software in windows. Software can display analysis result by spectrum and isoline. Test data can be export to word or excel easily. Performance 1. Test range: +/-2000 mV 2. Testing accuracy: +/-1 mV 3. Test point distance: 1~ 99cm setting 4. Applicable environmental: Temperature: -10? ~ +40? Dampness:
Concrete testing equipment, chloride tester, alkali tester, concrete ion penetration tester, strength tester, test hammer, rebar locator, thickness tester, crack width tester, ndt equipment, pile testing equipment, high strain dynamic pile tester, low strain dynamic pile tester, static loading tester.
Riceberry Rice is the new variety of rice that has been bred in Thailand. The rice is deep purple in colour; this gorgeous dark colour is typical of plants that yield high nutrition. Rice berry rice is cross-pollination of three hardy and loved rice strains. Riceberry takes on the best attributes of each of the grains that were used in its inception. The light fluffy texture and flavour from Thai jasmine rice, high in minerals and antioxidants from Hom Nin rice and hardy and high yield characteristics of Khao Dawk Mali 105.
Riceberry Rice is the new variety of rice that has been bred in Thailand. The rice is deep purple in colour; this gorgeous dark colour is typical of plants that yield high nutrition. Rice berry rice is cross-pollination of three hardy and loved rice strains. Riceberry takes on the best attributes of each of the grains that were used in its inception. The light fluffy texture and flavour from Thai jasmine rice, high in minerals and antioxidants from Hom Nin rice and hardy and high yield characteristics of Khao Dawk Mali 105. Packaging sizes: 1kg, 5kg, 10kg, 15kg, 20kg, 50kg, bulk
Feature: Non-Slip Style: Oriental Use :Home Pattern: Abstract pile height: high pile Product Name: Mat OEM: 8 Years Packing carton or bale
Product Details: Best For : Horse Moisture : 12% Type Of Supplement : Equine Laminitis and Gastric Ulcer Recovery Packaging Size : 39 Kgs Form : Pellet Processing Type : Extruded Pellets Weight : 39 Kgs Drug Composition : Nil Equine Laminitis Feed and Gastric Ulcer Recovery Nutrition Lamicert Feed (H -440518) Salient Features A truly 100% Grain Free and Grain By-product Free feed with less than 1.5% Starch Natural Vitamin E and Selenium for antioxidant protection of Muscle Tissue Suitable for all breed of Horses Ideal Feed for Equine Suffering from Laminitis, Ulcer, Tying Up and Hyperactive Balance with all essential nutrients, so no additional top up required Daily Food for your Laminitic Horse Moisture (% Maximum) : 12.0 Crude Protein % : 18 Crude Fat % : 4.9 Crude Fiber % : 22 Digestible Energy (Hind Gut)kcal/kg : 2595 Crude Ash % : 7.4 Feeding Quantity*: 2Kgs Morning + 1Kgs Noon + 2Kgs Evening = 5 Kgs *Above mentioned is the minimum recommended feeding quantity which can be increase at the rate of 500g in different intervals. Nutrition being dynamic, so necessary increments are recommended on physical observation. For the Best Results Introduce into Horse\'s ration gradually over a week period Avoid 100% Grain, Sugar (in any form) and Starch intake Feed in conjunction with ample forage (Pasture, Hay and/or Chaff) Adjust the amount fed so its appropriate for the a horse\'s body condition, stage of training, workload, pregnancy or lactation. For Laminitis effected horses feed horses with forage less than 12% Non-Structural Carbohydrates Never starve a horse with laminitis - this can cause hyperlipaemia (which has a high fatality rate) Late cut, native species grass hay is likely to have lower sugar levels than early cut improved species grass hay. High fibre haylage may also be suitable. Lucerne Leaf based nutrition appears to have a protective effect on the equine stomach and appears to reduce the incidence / expansion of gastric ulcers in horses In instances of additional nutritional top up required HAF Nutricure Feed is recommended for horse\'s suffering from gastric ulcer. Divide the feed into three or more smaller meals. The feeding rates given here are based on the amount of feed needed to meet the animal\'s basic nutrient requirement. For extensive information please contact HAF Animal Nutritionists Additional Information: Item Code: H-440518 Production Capacity: 450 MT per Day Delivery Time: 18 Days minimum Packaging Details: 39 Kgs PP Packing
Its properties have been widely studied, the most important being its antioxidant, antimicrobial activity and, in fairly primary studies, antitumor, antiseptic and is also considered tonic and digestive. In folk medicine, the infusion of oregano has been used as an aid in the treatment of cough. Hippocrates used oregano as an antiseptic, as well as a cure for stomach and respiratory diseases. A Cretan oregano (O. dictamnus) is still used today in Greece as a palliative for sore throat. Oregano has a high antioxidant activity, due to a high content of phenolic acids and flavonoids. In test tube studies, antimicrobial activity has also been demonstrated against strains of foodborne pathogens Listeria monocytogenes. In traditional Austrian medicine it has been used internally (as tea) or externally (as an ointment) for the treatment of disorders of the gastrointestinal tract, respiratory tract and the nervous system.
EES All in one system 16KWH LiFePO4 Lithium Battery with AC Charger and 10KW Inverter for solar energy storage application ESS including LiFePO4 Lithium Battery with BMS, off grid pure sine wave inverter, AC/DC charger. This product is composed of high quality lithium iron phosphate core (series-parallel connection) and advanced BMS management system. It adopts master-slave mode, which is convenient for monitoring and controlling the input and output system. The charging and discharging are independent, it can control the charging current of the AC charger and solar controller according to the battery temperature, voltage and SOC to better protect the battery cells from overcharging, overheating and discharging. It has high reliability and long life, products developed for applications such as solar energy storage, industrial and commercial energy storage, household energy storage, charging piles, data room and other applications. Product advantages: All-in-one design, high integration and space saving installation Using high-performance lithium iron phosphate cells, laser welding, good cell consistency, designed service life of more than 10 years Charging and discharging are controlled separately, which is convenient and reliable to control charging and discharging. The discharge port will not be disconnected when over-charging, and the charging port will not be disconnected when over-discharging, the system has good stability Master-slave mode, passive equalization, can manage the equalization resistance, can set the equalization start voltage difference, and monitor the equalization resistance temperature, more intelligent and safe, and reduce the impact of barrel effect on system energy storage BMS adopts NXP(USA) automotive-grade high-performance chips, with strong anti-interference, good reliability and wide temperature range System parameters can be set through the host computer, such as fan start/stop temperature, charger maximum current setting, charge and discharge current correction, SOC correction, with insulation leakage detection function to prevent oil leakage and short circuit of the cell Integrate Solar charge controller or AC charger optional, BMS communication control, more safe and reliable;
Our All in one system 32KWH LiFePO4 Lithium Battery with AC Charger and 12-15KW 120/240V Inverter for mobile vehicle application ESS including LiFePO4 Lithium Battery with BMS, off grid pure sine wave inverter, AC/DC charger. This product is composed of high quality lithium iron phosphate core (series-parallel connection) and advanced BMS management system. It adopts master-slave mode, which is convenient for monitoring and controlling the input and output system. The charging and discharging are independent, it can control the charging current of the AC charger and solar controller according to the battery temperature, voltage and SOC to better protect the battery cells from overcharging, overheating and discharging. It has high reliability and long life, products developed for applications such as solar energy storage, industrial and commercial energy storage, household energy storage, charging piles, data room and other applications. Product advantages: All-in-one design, high integration and space saving installation Using high-performance lithium iron phosphate cells, laser welding, good cell consistency, designed service life of more than 10 years Charging and discharging are controlled separately, which is convenient and reliable to control charging and discharging. The discharge port will not be disconnected when over-charging, and the charging port will not be disconnected when over-discharging, the system has good stability Master-slave mode, passive equalization, can manage the equalization resistance, can set the equalization start voltage difference, and monitor the equalization resistance temperature, more intelligent and safe, and reduce the impact of barrel effect on system energy storage BMS adopts NXP(USA) automotive-grade high-performance chips, with strong anti-interference, good reliability and wide temperature range System parameters can be set through the host computer, such as fan start/stop temperature, charger maximum current setting, charge and discharge current correction, SOC correction, with insulation leakage detection function to prevent oil leakage and short circuit of the cell Integrate Solar charge controller or AC charger optional, BMS communication control, more safe and reliable;
Product introduction: This product is composed of high quality lithium iron phosphate core (series-parallel connection) and advanced BMS management system. It adopts master-slave mode, which is convenient for monitoring and controlling the input and output system. The charging and discharging are independent, it can control the charging current of the AC charger and solar controller according to the battery temperature, voltage and SOC to better protect the battery cells from overcharging, overheating and discharging. It has high reliability and long life, products developed for applications such as solar energy storage, industrial and commercial energy storage, household energy storage, charging piles, data room and other applications. Product advantages: All-in-one design, high integration and space saving installation Using high-performance lithium iron phosphate cells, laser welding, good cell consistency, designed service life of more than 10 years Charging and discharging are controlled separately, which is convenient and reliable to control charging and discharging. The discharge port will not be disconnected when over-charging, and the charging port will not be disconnected when over-discharging, the system has good stability Master-slave mode, passive equalization, can manage the equalization resistance, can set the equalization start voltage difference, and monitor the equalization resistance temperature, more intelligent and safe, and reduce the impact of barrel effect on system energy storage BMS adopts NXP(USA) automotive-grade high-performance chips, with strong anti-interference, good reliability and a wide temperature range
