Product nameTgm-3e slurry pump TypeTgm Pump size4/3 Capacity126-252m3/h Head12-97m Allowable max. Power120kw Speed600-1400r/min Npsh2-5m Introduction£º Model explanation Tgm-4f T: our company logo G: high head M: metal lined 4: discharge size (inch) F: frame type with maximum power Introduction of centrifugal slurry pump ¡ª¡ª tgm series Tgm series slurry pumps are cantilevered, horizontal slurry pumps, centrifugal slurry pumps. They are designed for the handling of highly abrasive, high-density slurries. This series pump may also be installed in multistage series The features of this kind of centrifugal slurry pump The frame plate liner and impeller for tgm series centrifugal slurry pump are made of wear-resistant metal. The shaft seals for the tgm series may choose gland seal or expeller seal. The discharge branch can be oriented to any of the eight positions to suit installations and applications. Application: They are designed for the handling of highly abrasive, high density slurries in the metallurgical, mining, coal, power generation, construction material and other industry. The pumps of this type may also be installed in multistage series. Tgm series slurry pump performance chart Pump modelAllowable max. Power(kw)Clear water performance¡¡ Capacity qHead h(m)Speed n(r/min)Max.Eff. ¦ç%Npsh (m)Impeller dia(mm) M3/hL/s Tgm-1c3016.2-34.24.5-9.525-921400-2200202-5.5330 Tgm-2d6068.4-13719-3825-87850-1400473-7.5457 Tgm-3e120126-25235-7012-97600-1400502-5508 Tgm-4f260324-72090-20030-118600-1000643-8711 Tgm-6s560468-1008130-28020-94500-1000654-12711 Note: quantity range recommended:50%q¡¯¡üq¡ü100%q¡¯(q¡¯appropriate to capacity at highest efficiency point). 2.Npsh:appropriate to point q recommended at highest speed. Exported wooden crate
Www.Hanhe-pump.Com Hanhe group co., limited Professional slurry pump dredging pump manufacturer and exporter china. Our slurry pump are dimensionally interchangeable with warman® slurry pump. Ah, hh, l, m slurry pump, g gravel pump and wn dredging pump. Warman ah, warman hh, warman l, warman m
Product name THM-3C slurry pump Type THM pump size 4/3 Capacity 86.4-198m3/h Head 9-52m Allowable Max. Power 30kw Speed 1000-2200r/min NPSH 4-6m Introduction Model Explanation and Performance Chart: THM-3C T: Tower pump H: High Concentration M: Metal lined 3: Discharge size (inch) C: Frame type with maximum power Introduction of Slurry Pump ---- THM Series THM Series slurry pump is mainly used for handing strong abrasive, high density slurries and low density, high head slurries in the metallurgical, mining, coal, power, building material and other industrial departments etc. The features of this kind of slurry pump The frame plates of this kind of slurry pump have replaceable wear-resistant metal liners. The impellers are made of wear-resistant metal. The frame plate liner and impeller for THM pump are adoptable of hard metal only. Bearing assembly of this kind of slurry pump use cylindrical structure, adjusting the space between impeller and front liner easily, being removed completely when being repaired. Bearing assembly use grease lubrication. The shaft seal of this kind of slurry pump could use the packing seal, expeller seal and mechanical seal. The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications. Here are the drive types, such as V belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices. Wide performance, good NPSH and high efficiency are main character of these kinds of slurry pump. The pump of this type may be installed in multistage series to meet the delivery for long distance. Main application of this kind of slurry pump This kind of slurry pump mainly applies in coal washer processing, handling with the fine ore and tailings in metal mine, handing combined bottom and fly ash in a thermal power station etc. Pump Model THM Series Impeller Dia. Allowable Max.Power Clear Water Performance Capacity Q Head H(m) Speed n(r/min) Max.Eff. ¦Ç% NPSH (m) m3/h l/s THM-1B 15 12.6-28.8 3.5-8 6-68 1200-3800 40 2-4 152 THM-1.5B 15 32.4-72 9-20 6-58 1200-3200 45 3.5-8 184 THM-2C 30 39.6-86.4 11-24 12-64 1300-2700 55 4-6 214 THM-3C 30 86.4-198 24-55 9-52 1000-2200 71 4-6 245 THM-3D 60 THM-4D 60 162-360 45-100 12-56 800-1550 65 5-8 365 THM-4E 120 THM-6E 120 360-828 100-230 10-61 500-1140 72 2-9 510 THM-6R 300 THM-8ST 560 612-1368 170-380 11-61 400-850 71 4-10 686 THM-10ST 560 936-1980 260-550 7-68 300-800 82 6 762 THM-12ST 560 1260-2772 350-770 13-63 300-600 77 3-10 965 THM-14ST 1200 1368-3060 380-850 11-63 250-550 79 4-10 1067 exported wooden crate
Tobee® china warman slurry pump Specification: Size (discharge): 1" to 22" pump Capacity: 10.8~ 5400 m3/hr Head: 6m ~ 135 m Handing solids: 0 ~ 650mm Concentration: 0%~ 70% Material:high chrome alloy, rubber, stainless steel etc.
Tobee® china warman slurry pump Specification: Size (discharge): 1" to 22" pump Capacity: 10.8~ 5400 m3/hr Head: 6m ~ 135 m Handing solids: 0 ~ 650mm Concentration: 0%~ 70% Material:high chrome alloy, rubber, stainless steel etc.
Designed to be interchangeable with a Warman AH 6/4 Slurry Pump. FH Series slurry pumps are mainly using for handing strong abrasive, high density slurries and low density, high head slurries in the metallurgical, mining, coal, power, building material and other industrial departments etc. Structure: The frame plates of this kind of slurry pump have replaceable wear-resistant metal liners. The impellers are made of wear-resistant metal. Bearing assembly of this kind of slurry pump use cylindrical structure, adjusting the space between impeller and front liner easily, being removed completely when being repaired. Bearing assembly use grease lubrication. The shaft seal of this kind of slurry pump could use the packing seal, expeller seal and mechanical seal. The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications. Here are the drive types, such as V belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices. The pump of this type may be installed in multistage series to meet the delivery for long distance. Application: This kind of slurry pump mainly applies in coal washer processing, handling with the fine ore and tailings in metal mine, handing combined bottom and fly ash in a thermal power station etc. We supply complete, ready-to-use packages including pump, motor and frame desinged to your specifications. These pumps are ideal for the chemical transfer pump in plants for chemicals including lime. Standard export wooden cargo.
Slurry pump can be widely used in mines, electric power, metallurgy, coal, environmental protection and other industries transport slurry containing abrasive solid particles.Such as metallurgical mill pulp conveying, hydraulic ash thermal power plants, coal washery coal slurry and heavy media delivery, dredging river, river dredging, etc.In the chemical industry, also can carry some corrosive slurry containing crystallization. This series pumps are contain cantilever and horizontal centrifugal pumps which apply to transport slurry with strong corrosion proof and high concentration.
Slurry pump can be widely used in mines, electric power, metallurgy, coal, environmental protection and other industries transport slurry containing abrasive solid particles.Such as metallurgical mill pulp conveying, hydraulic ash thermal power plants, coal washery coal slurry and heavy media delivery, dredging river, river dredging, etc.In the chemical industry, also can carry some corrosive slurry containing crystallization.
3/2D-HH High Head Slurry Pump is designed to produce high heads per stage at high pressures. Commonly used for long distance transport lines, the high head slurry pump lines can often satisfy application duties with a single pump where others require multiple pumps in series.
Tobee 4/3E-HH High Head Slurry Pump is fit for a variety of applications ranging from filter press feeds to pipeline transport staging pumps. The high heads along with sturdier wear parts makes these pumps some of the most rugged in the slurry pump line. Extensive exterior ribbing allows for higher heads to be reached with a single slurry pump, and bulked up wet end parts handle the toughest applications in the field today. Design Features: Ductile iron fully lined casing provides durability, strength and long service life. Multi-stage high pressure operation to 750 psi. Heavy duty construction with through-bolt design provides ease of maintenance and minimal downtime. Large diameter, slow turning, high efficiency impellers designed to achieve maximum wear life and low operating costs. Large, open internal passages designed to maximize wear life and lower operating costs. Thick elastomer and alloy liners provide superior corrosion resistance and maximum wear life. Full flush gland, low flow, and dry running centrifugal seals reduce flush water usage minimizing pump operating costs.
Www.Hanhe-pump.Com China hanhe is a professional slurry pump, gravel pump and dredging pump manufacturer in china. Pumps are dimensional interchangeable with warman pump. 1.5/1b-ah, 3/2c-ah, 4/3c-ah, 10/8st-ah
Warman slurry pump replacement from China supplier: HS (R)Series Introduction: HS(R) pump is horizontal centrifugal heavy duty slurry pump and it is designed for the continuous pumping of high abrasive, high density slurries with minimal maintenance requirements. It will maintain high efficiency over the wear life of its components. The rubber and metal lined pumps feature casings which are radially split into two halves. Minimum casing bolts reduce maintenance and minimise downtime. The pumps of HS can be installed as multi-stage series. Features of centrifugal slurry pump: 1.Replaceable wear-resistant metal or rubber liners and impellers, long service life time. 2. Easy to adjust the space between impeller and front liner and can be removed completely when maintaining. 3.Bearing assembly use grease lubrication. 4. Seal types: packing seal, expeller seal and mechanical seal. 5. Discharge direction can be installed at intervals of 45 degrees as request and oriented to any eight positions to suit applications. 6. Drive types: V belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices. 7. Wide application, good NPSH and high efficiency. The series pump can be installed in multistage to meet the delivery for long distance. Specification of ash slurry pump : D:25 mm to 450 mm Q: to 5,000 m3/hr H: to 73 m z
Www.Hanhe-pump.Com Thg series pumps are designed to handle high abrasive slurry which contain large particles that other models pumps could not handel.The large volume inside is the best choice for gravel and dredging work.Low npsh requirement and robust design insure long life with sever duties. Warman g gravel pump
Suit for 50% hardenite dirty water,mud slurry; such as building operation, emergency road repair exhaust and so on; also could use as clean water pump.
Tobee TH Slurry Pump Size: 1" to 22" Capacity: 3.6-5400 m3/h Head: 6-125 m Handing solids: 0-130mm Concentration: 0%-70% Materials: Hyper chrome alloy, Rubber, Polyurethane, Ceramic, Stainless steel etc.
Slurry pumps are designed to handle liquids containing abrasive and coarse grained solids. It has a heavy duty design with a single stage axial inlet. It is also suitable for sand water mixtures and other related slurry
They are generally used for slurries containing high concentrations of erosive solids or where an Extremely heavy duty pump is required. Aojin pumps are available both metal and rubber lined corrosion and abrasion resistant materials. Discharge diameters -
We manufacture slurry pumps for various slurries in cement and concrete industry as well as other slurries across industries like pulp, clay and oil. Our slurry pumps are designed for sturdy operation with heavy duty cycles. Our pumps are precision manufactured to provide measured output or a continuous output as required. We provide two types of slurry pumps - peristaltic pumps and screw pumps, both used for positive flow of slurries. Please contact us with your requirements for further information on suitability and productivity.
Designed to be interchangeable with a warman ah 4/3 slurry pump. Fh series slurry pumps are mainly using for handing strong abrasive, high density slurries and low density, high head slurries in the metallurgical, mining, coal, power, building material and other industrial departments etc. Structure: The frame plates of this kind of slurry pump have replaceable wear-resistant metal liners. The impellers are made of wear-resistant metal. Bearing assembly of this kind of slurry pump use cylindrical structure, adjusting the space between impeller and front liner easily, being removed completely when being repaired. Bearing assembly use grease lubrication. The shaft seal of this kind of slurry pump could use the packing seal, expeller seal and mechanical seal. The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications. Here are the drive types, such as v belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices. The pump of this type may be installed in multistage series to meet the delivery for long distance. Application: This kind of slurry pump mainly applies in coal washer processing, handling with the fine ore and tailings in metal mine, handing combined bottom and fly ash in a thermal power station etc. We supply complete, ready-to-use packages including pump, motor and frame desinged to your specifications. These pumps are ideal for the chemical transfer pump in plants for chemicals including lime. Standard export wooden cargo
Benefits: Bearing assembly – a large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame. Liners – easily replaceable liners are bolted, not glued, to the casing for positive attachment and east of maintenance. Hard metal liners are completely interchangeable with pressure molded elastomer. Elastomer seal rings back all liner joints. Casing – Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety. Impeller – front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded elastomer impellers are completely interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available. Throatbush – wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal. One-piece frame – a very robust one-piece frame cradles the cartridge type bearing and shaft assembly. An external impeller adjustment mechanism is provided below the bearing housing for easy adjustment of impeller clearance. Wooden case with plastic inner packing.
