Features: --Superior wear resistance --High hardness and mechanical strength --Good corrosion resistance --High precision for tolerance They're widely used in oil&gas, bearings, ball screws,valves and flow meters.pen,spraying machines,pump,machinery parts and other industries. Grade Density g/cm3 Hardness HRA(hv) T.R.S (M Pa) Performances & applications recommended YG6 14.9 89.5 2150 Good Wear resistance, used for hard wood,processing original wood,aluminum section bar,brass rod and cast iron. YG8 14.6 89 2320 Suitable for the roughening of cast iron and light alloys and also for the milling of cast iron and low-alloy steel.
Cobalt-chromium-molybdenum alloy (CoCrMo) is a kind of cobalt-based alloy, and is also a kind of Stellite alloy. It is a cobalt-based alloy that is resistant to wear and corrosion. The first cobalt-based alloy was a cobalt-chromium binary alloy, which was later developed into a cobalt-chromium-tungsten ternary composition, and then later did the cobalt-chromium-molybdenum alloy develop. Cobalt-chromium-molybdenum alloy is a kind of alloy with cobalt as the main component, containing a considerable amount of chromium, molybdenum and a small amount of nickel, carbon and other alloying elements, and occasionally also containing iron. DM FOR MORE IMFO
The component of yg6 tc-balls Grade component hardness density Applications: yg6 tc-balls all is widely used in a variety of hardware industry, valves, bearings, die-casting, punching parts, grinding, measuring. Features: the main components are tungsten-cobalt alloy (wc-co) with a high hardness, hra90-92, abrasion resistance is better, Its wear resistance is hundreds time previous to steel balls The component of yg6x tc-balls Grade component hardness density Bending strength porosity analysis Wc co hra g/cm3 g/�o Yg6x 94% 6% 92 14.6-15.0 1450 a02b02c02 Applications: yg6x carbide ball is widely used in a variety of hardware industry, valves, bearings, die-casting, punching parts, grinding, measuring, Chemical, petroleum, and military.Features: the main components are tungsten-cobalt alloy (wc-co) with a high hardness it is a fine-grained alloy. It��s hardness and wear resistance is a little better than yg6x alloy balls, but it��s toughness is slightly lower than the ball of yg8, So it is suitable for production of wear-resistant alloy and impact-resistant parts The component of yg8 tc-balls Grade component hardness density Bending strength porosity analysis Wc co hra g/cm3 g/�o Yg8 92% 8% 89 14.4-14.8 1800 a02b02c02 Applications: yg8 carbide is widely used in ball valves, bearings, die-casting, punching parts, grinding, measuring, hardness tester, petroleum, chemical, aviation and aerospace. Features: the main components are tungsten-cobalt alloy (wc-co) with a high hardness and wear resistance, it��s toughness is better than yg6 alloy ball and has good anti-vibration shock engaged in the performance, suitable for production of strong shock and vibration components
Tungsten carbide (TC) balls are used where extreme hardness and wear resistance is required; in such applications as bearings, ball screws, valves and flow meters. They are also used for coining and as pivots, detents and tips for gages and tracers. Decimal-inch sized tungsten carbide balls are widely used for ballizing (below) or measuring hole sizes (see Inspection Products data sheet.) They are also used for inspection tools, comparative checking and gaging.
density 18+/-0.2g/cm3 95%W-Ni-Fe Ø2-100mm Standard Packing: bags + bubble wraps + cartons/drums
Advantages: * High density (17.0~18.5g/cm3). * Good machinability. * Good mechanical properties * High modulus of elasticity * High absorption capacity against x-rays and v-rays * Harmless to the health and environment.Applications: * Protection shields for nuclear radiation * Balancing weights * Substitutional material for Uranium * Electroheat upsetting anvil block * Balls in bomb. * High voltage electrical contact * Electrodes for Resistance WeldingProduct Standard: ASTM B 777 99.
Material: 90%-97%WNiFe Standard: AMS-T-21014 and ASTM-B-777 Specification: Dia1.0mm~Dia380mm are available Package: in a iron drum or wooden case. Payment: Usually T/T and L/C, D/A can be accepted. Density: 16.85-18.75g/cm3 Surface: Machined We manufacture various grades and sizes of balls competely strictly with customer's request and drawing. Application:Tungsten alloy spheres, and tungsten alloy cubes are typically used for fragments in various ammunition products. The high density and compactibility make them ideal to create maximum damage within a given packed volume.It is also widely used in counterweight.
We are glad to propose 500 MT of stain less steel mill scale. Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products. At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel. The recovery ratio after melting in furnace for the most valuable alloy elements is: - Ni: 3.5 - 4.5% - Cr: 6-8% From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows: Waste code: 10 02 10 The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers. Chemical analysis of the material is available on request.
Supply all kinds of Tungsten heavy alloy ball WNiCu ---From Chengdu woco carbide
Haynes HR120 is a nickel-based alloy with excellent high-temperature strength, good resistance to oxidation and thermal fatigue, and excellent creep resistance. It is typically used in gas turbine engine components, such as turbine blades and vanes, as well as in industrial furnace applications. Haynes HR120 offers excellent high-temperature strength, with a minimum yield strength of 830 MPa and a minimum tensile strength of 980 MPa. It also has good ductility, with a minimum elongation of 14%. In addition, it has excellent creep resistance, with a rupture life of up to 20,000 hours at 760�°C. Haynes HR120 also has good resistance to oxidation and thermal fatigue, which makes it suitable for use in gas turbine engine components that are exposed to high-temperature and corrosive environments. It has a maximum HB hardness of 290 and excellent fatigue strength at high temperatures. Haynes HR120 is typically available in the form of sheet, plate, bar, and wire. It can be machined using conventional methods and is weldable using standard welding techniques. Overall, Haynes HR120 is a high-strength, high-temperature alloy with excellent resistance to oxidation and thermal fatigue, making it ideal for use in gas turbine engine components and industrial furnace applications where high-temperature and corrosive conditions are present. Here are the international standards for Haynes HR120 alloy: USA: AMS 5538, AMS 5794, AMS 5795, AMS 5798, AMS 5859, AMS 5860, AMS 5936, AMS 5937, AMS 5960, AMS 5961, AMS 5977, AMS 5978, AMS 5979, AMS 5980, AMS 5981, AMS 5990, AMS 5991, ASTM B435, ASTM B582, UNS N08120 Europe: EN 2.4869 Germany: DIN 17742 UK: BS HR 206 Japan: JIS NW 6888 We can provide the following the form:Haynes HR120 coil; HaynesHR120 strip;Haynes HR120 plate; Haynes HR120 sheets; Haynes HR120 tube; Haynes HR120 pipe;Haynes HR120 flat; Haynes HR120 bar GB/JIS/UNS:N08120/W.Nr Haynes HR120 is a high-strength, high-temperature alloy that is commonly used in gas turbine engine components and industrial furnace applications where high-temperature and corrosive environments are present. It offers excellent high-temperature strength, good ductility, and excellent creep resistance. The following are some of the specific applications of Haynes HR120: Gas turbine engine components: Haynes HR120 is often used in the manufacture of turbine blades, vanes, and other components in gas turbine engines. Its high-temperature strength, excellent creep resistance, and resistance to thermal fatigue make it ideal for use in this application.
Haynes 242 is a nickel-chromium-molybdenum alloy with excellent high-temperature strength, good oxidation resistance, and resistance to hot corrosion and thermal fatigue. It is typically used in gas turbine engine components, such as turbine blades, vanes, and combustor liners, as well as in industrial furnace applications. Haynes 242 offers excellent high-temperature strength, with a minimum yield strength of 880 MPa and a minimum tensile strength of 1100 MPa. It also has good ductility, with a minimum elongation of 12%. In addition, it has good thermal stability and resistance to thermal fatigue, making it suitable for use in high-temperature applications. Haynes 242 also has good resistance to oxidation and hot corrosion, which makes it suitable for use in gas turbine engine components that are exposed to high-temperature and corrosive environments. It has a maximum HB hardness of 300 and excellent fatigue strength at high temperatures. Haynes 242 is typically available in the form of sheet, plate, bar, and wire. It can be machined using conventional methods and is weldable using standard welding techniques. Overall, Haynes 242 is a high-strength, high-temperature alloy with excellent resistance to oxidation and hot corrosion, making it ideal for use in gas turbine engine components and industrial furnace applications. Here are the national standards for Haynes 242 alloy: United States: AMS 5708, AMS 5776, AMS 5777, AMS 5853, AMS 5854, AMS 5857, AMS 5858, AMS 5895, AMS 5896, AMS 5897, AMS 5898, AMS 5965, AMS 5966, AMS 5967, AMS 5968, AMS 5969, AMS 5970, AMS 5971, AMS 5972, AMS 5973, AMS 5974, AMS 5975, AMS 5976, AMS 5977, AMS 5978, AMS 5979, AMS 5980, AMS 5981, ASTM B435, ASTM B572, UNS R30556 Europe: EN 2.4683 Germany: DIN 17743, VdTÃ??V 435 United Kingdom: BS HR 202, BS HR 501, BS HR 502 Japan: JIS NW 6242 We can provide the following the form:Haynes 242 coil; Haynes242 strip;Haynes 242 plate; Haynes 242 sheets; Haynes 242 tube; Haynes 242 pipe;Haynes 242 flat; Haynes 242 bar GB/JIS:NW 625/UNS:N10242/W.Nr:2.4683 Haynes 242 is typically used in gas turbine engine components, such as turbine blades, vanes, and combustor liners. It is also used in industrial furnace applications, including muffles, retorts, and heat treating fixtures. The high-temperature strength and excellent resistance to oxidation and hot corrosion make Haynes 242 an ideal material for use in high-temperature and corrosive environments. It is commonly used in aerospace, power generation, and industrial applications where high-temperature and corrosive conditions are present.
K20 K30 Customized cutting tungsten carbide Tablets For Alloy Steel / Iron Tungsten carbide tablets are widely used in petroleum drilling and snow removal,snow plow machines and other equipments. Also be used fordrilling,mining and road sweeping machine,snow removal and road maintenance tools. Also,it has a great help in quarrying,mining,tunneling tools,as well as civil construction. Description of Carbide Tablets: As special carbide products manufacturer, we are good at producing different kinds of tools as needed. Tungsten carbide material can be treated with cobalt to produce certain characteristics. The more cobalt in the metal, the shock resistant is better. While less cobalt will result in a more wear-resistant metal. Our application engineers are experienced at helping clients find the right blades for their needs. Advantages of Our Carbide Tablets: 1. Dust-free workshop 2. Virgin raw material with fine grain size 3. Advanced technology and production equipment 4. All of the mould with precision design 5. Strict quality testing and inspection
K20 K30 Customized cutting tungsten carbide Tablets For Alloy Steel / Iron Tungsten carbide tablets are widely used in petroleum drilling and snow removal,snow plow machines and other equipments. Also be used fordrilling,mining and road sweeping machine,snow removal and road maintenance tools. Also,it has a great help in quarrying,mining,tunneling tools,as well as civil construction. Description of Carbide Tablets: As special carbide products manufacturer, we are good at producing different kinds of tools as needed. Tungsten carbide material can be treated with cobalt to produce certain characteristics. The more cobalt in the metal, the shock resistant is better. While less cobalt will result in a more wear-resistant metal. Our application engineers are experienced at helping clients find the right blades for their needs. Advantages of Our Carbide Tablets: 1. Dust-free workshop 2. Virgin raw material with fine grain size 3. Advanced technology and production equipment 4. All of the mould with precision design 5. Strict quality testing and inspection
Chemical products metal products like copper wire scrap, copper cathode, tungsten rod, aluminum plate, nickel alloy, silicon, copper powder, tungsten powder, wire mesh, zinc ingot.Clearing agent, transportation, and shipping etc.
Virgin recycle 100% cotton polyester spun yarn ,viscose , bamboo, modal, tri blends, acrylic blended yarns ,tr tc, pv ,pc ,cotton ,nylon linen,modal blend , melange, sewing thread, csy yarns , aloe yarns, soy yarns , cotton yarns, poy,fdy ,dty texturised , denim yarn sizing waste aloevera yarn, soya bean, imitation jewellery brass jewellery, glass beads, alloy ,stainless steel artificial jewellery rings , bracelets, earrings, bracelets , necklace , rose gold plated jewellery , sterling silver fashion imitation jewellery ,cotton hard waste, sweeping waste , lickerin drop a. counts :1/1 to 120/1 b. multi ply 2 ply , 3 ply , upto 12 ply c. mvs vortex, ring, siro compact, siro spun, high twist , tfo, open end , doubled yarns , cationic dyeable ,d. fibres : lenzing,eccovero,lyocel,tencel e. color raw white ,dyed as per pentatonic shade f.certifications: primark, pscp , ic2, oekotex,grs,organic,gots, fibre certificate g. weaving/unwaxed & knitting /waxed yarns.
Our good quality tungsten carbide is used in drills, saws, die etc. We export our items worldwide as well as China mailand.
Specifications 1.Iso 9001:2008 2.100% virgin raw material 3.From zhuzhou city-tungsten carbide kingdom 4.Hip sintered 5.Having 8 patents In waterproof and shockproof carton
All type clothes, urea, all type agriculture and food items, all personal and entertainment items, all industrial and automotive items, all construction household and furnishing, all computers electronics and electrical, handicraft, items, npk, fertilizers t shirt, blanket,dry fruits, animal feeds, towel, bedsheets, toys, all grocery, copper wire scrap, copper ore concentrate, zinc ore concentrate, lead concentrate, fly ash, a4 paper, a3 paper, craft paper, occ, ldpe, hdpe , pvc resin, petroleum products, jp54, jet a1, crude oil, blco , biodiesel, diesel, fuel, coal, d2, petcock, pulses, mustard oil, spices , sanitizer, gloves, medical products, cement, core sand, old ships lng, lpg, all groceries items, food products, hms1 and hms2, fish, chicken feet, chicken paws, agri & food processing agriculture products, fertilizers, seeds, farm products grains, fruits, vegetables, river sands, aggregates, pvc electrical wire, rice, charcoal, wheat flour.Export, import, merchant export import
What are details of tungsten carbide ring ? Name Tungsten Carbide,Tungsten Carbide Ring,Tungsten Features 1. High hardness and wear-resistance 2.Good anti-corrosion and heat-resisting 3.High strength and good toughness 4.The hardness and the wear-resistance will not change in 500°C.Even in 1000 °C it still has a high hardness. 5.It is a cemented carbid Representative products 1. Tungsten steel rod 2. Tungsten steel strip 3. Tungsten steel discs 4. Tungsten steel sheet Sizes According to your requirments Packing Normal packing or according t customer's requests. Price The price will change according to the weight of the steel you need. What is the tungsten steel grades? SONGSHUN CB CARBIDE KENNA KYORITSU FUJILLOY ROBLLOY CERATIZIT MG10 KG6 CD-50 TB6 G55 VA40 HC60 MG10.1 EA65 CDKR3150 TB7 G65 VA50 HC70 MG20 ST7 CD60 TB7 G70 VA60 HC80 MG60 VA95 CD70 G8 C95 VA70 HC50 MG80 WF25 CD18 KD10/KD20 F20 RD25 HC40 PD650 WF30 CD650/KR887 KD20 D40 RD30 HC30 PV20 WF40 CD650 KD20 D40 RD40 HC25 PV30 WF30/KG5 KR887 kD40 D50 RD50 HC20 VG1 KG1 CD630 G1 F20 VA30 HC10 VG2 KG2 CD30 G2 F10 VA35 HC20 VG3 KG3 CD35 G3 D30/D40 REA25 HC10 VG4 KG4 CD40 G4/G5 D40/D50 REA30 HC03 PG05 WF05 CD630 KD05 N10 DA10 SMX PG06 WF10 CD-KR885 KD10 F10 FD25 SMS PG07 WF20 CD635 KD05/KD10 D10 RD20 S3X7 PG08 WF15 CD-KR855 KD05/EF10 D20 KA20 S4X7 These are our main products, other tungsten steel can also produce.
We are supplier of Tungsten Carbide Items in sintered and finished condition. We can supply with various wear part grades and shapes as per standard and non-standard specifications. Also Special items can manufactured based on customer's requirements. Our Products details: Tc Wire/tube/bar drawing pellets. Tc Heading Pellets for cold and hot forging. Tc Valve Seat, Orifice plugs etc. Tc Washers, Swirl Chambers etc. Tc Sugar Tips. Tc Bushes for jigs and gauges. Tc Roller and Pulleys Tc Burnishing rollers Tc Nozzles for Sand blasting. Tc Flats & other special wear parts. Tc Bowl, ring, cups, disc etc. Please send us your requirements with dimensional drawing or samples. A waiting for your reply.