GT-02: Graphite felt Typical Applications Vacuum furnace insulation Inert gas furnace insulation Inert gas atmosphere process equipment insulation Crystal furnace insulation Type and Code GT-0201 Carbon felt GT-0202 Graphite felt Avalilable Sizes & Dimensions Thickness Width Length 10mm 1200mm 24meters Chemical Composition Carbon content % 92-99.9 Processing Temp íµ 1100-2200
Natural graphite
Features Of Graphite Powder Graphite Powder is our ultra-fine powder. Graphite powders are composed primarily of ultra-fine particles classified as per ultrafine size for various applications. It has 98-99% of Fixed Carbon content. It has self-lubricity and plasticity in high temperatures. Applications Drilling Conductive paints Electrically and thermally conductive coatings
Industrial Minerals
The chemical properties of graphite are very stable, high temperature resistance, corrosion resistance, and good conductivity.Therefore, graphite can be used as refractory material, sealing material, conductive material, and is widely used in high temperature metallurgy, sand finding, paint lubricant, pencil lead, pigment, polishing agent, petrochemical industry, synthetic fiber, heater and other industries.
The chemical properties of graphite are very stable, high temperature resistance, corrosion resistance, and good conductivity.Therefore, graphite can be used as refractory material, sealing material, conductive material, and is widely used in high temperature metallurgy, sand finding, paint lubricant, pencil lead, pigment, polishing agent, petrochemical industry, synthetic fiber, heater and other industries.
Baked graphite block with following specifications: Apprant density: 1.6g/cmâ?º min. Specific resistivity: 2 5 u m max. Ash:1.0% max. Sulphur: 0.3% max. Size: 3150mm X 630mm X 600mm Customized production available, please enquire.
HIGH Quality graphite rod suitable for a wide range of applications in work hobby and workshop.
Specs: 530*950/550*950 /550*1200/600*1200 other size can be customized
UHP 400mm*1800mm UHP 450mm*1800mm Used in steel, cement and glass manufacturing, expanded graphite - based sealing gaskets, graphite grease, braid, brushes, brake lining, etc.
Coir fibre bale, coir pith, coco peat, grow bags, coco chips, coir needle felt, coir geo textiles, rubberized coir(latex sprayed) sheets for mattress ,mulch mats and garden articles.
Coir needled felt mats are non-woven mats made from 100% coir fibre. The fibre is selected, dried and then weaved in the needle felt machine for required thickness. Then the needle is punched to achieve the desired degree of compaction. The fibre is bonded to form long sheets. Needled felt mats have excellent moisture absorption capacity and water retention characteristics. It is an ideal medium for plant growth. It is also used for lawn development and landscaping. Advantages Environmental Friendly Easy laying Easy rooting for plants Water retention capability
Can supply: Mix White-ecru Fabric Cuttings (clips) And Mix Quality (cotton, Cotto/lycra etc.) BALES WASTE. Materials are suitable for the production of felt - shoddy (for disintegration into fibers). Post industrial. Can load in 1x40HC container aprox. 25-27 MT net. Ready for shipment. Photos available upon request. If you are interested kindly contact us for more information (price, available quantity etc.). You are welcome to visit our company premises and supervise our materials. Certificate ISO: 9001, ISO: 14001, OHSAS 45001, AQSIQ and CCIC.
Can supply: New Fabric Cuttings (hosiery Clips) Mix Colors And Mix Quality (cotton, Cotto/lycra Etc.) Bales Waste. Materials are suitable for the production of felt - shoddy (for disintegration into fibers) and other apllications. Post industrial. Can load in 1x40HC container aprox. 25-27 MT net. Ready for shipment. Photos available upon request. If you are interested kindly contact us for more information (price, available quantity etc.). You are welcome to visit our company premises and supervise our materials. Certificate ISO: 9001, ISO: 14001, OHSAS 45001, AQSIQ and CCIC.
Lithium ore, tin, mica, lead ore, zinc oxide and natural graphite.
Mill scale, is formed on the outer surfaces of plates, sheets or profiles when they are being produced by rolling hot iron or steel billets in rolling or steel mills. It looks like a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in color. Being produced during the reheating, conditioning and hot rolling operation for the production of steel articles, the mill scale initially adheres to the steel surface and protects it from atmospheric corrosion, provided no break occurs in this coating. From the chemical and physical analysis performed on the scrap, and according to the european environmental rules, the material has been classified as a special non dangerous waste, listed in green list In particular the mill scale can be classified as follows: Einecs (european commission no.): 266-007-8 Waste code: 10 02 10 Basel code: b 12 30 Hs code: 2619.00
We are glad to propose 500 MT of stain less steel mill scale. Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products. At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel. The recovery ratio after melting in furnace for the most valuable alloy elements is: - Ni: 3.5 - 4.5% - Cr: 6-8% From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows: Waste code: 10 02 10 The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers. Chemical analysis of the material is available on request.
The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.
Agricultural products (coffee, rice, black pepper, cocoa, cashew nuts, etc.) garment/ medical product (non woven coveralls, gowns, medical facemask, arm cover, cap, shoes cover, bra, felt suit, towel, labor protection product) plastic products, pe tarpaulin, pvc tarpaulin, jumbo bag, pp bag, rubber products.
Commodities namely metal steel, oil & petroleum such as diesel en590, bitumen, jeta1, lng, lpg, coal, wood pellets, urea, dap, copper cathode, etc. other products: seafood food, birdnest, japanese food products namely wagyu beef, japanese sake..
