Product Descriptions Aramid fabric is one of the most commonly used composite materials,it has many outstanding characteristics:high toughness,high strength,flame resistant,heat resistant,bullet proof and shock-absorbing.Aramid fabric is applied in fire-fighting suits,flame proof gloves,medical equipments,military products,aerospace and spaceflight and other different fields. 1. Bidirectional Kevlar/Aramid Fabric/Cloth Properties Ultri-High Strength-- 5-6 times of steel wire High Modulus-- 2-3 times of steel wire or glassfiber High Temperature Resistance Acid and Alkail Resistance 2. Applications Tires, Bullet-proof Vest, Aircraft, Spacecraft, Sporting Goods, Conveyor Belts, High Strength Ropes, Buildings and Cars etc .
Aramid fabric is one of the most commonly used composite materials,it has many outstanding characteristics:high toughness,high strength,flame resistant,heat resistant,bullet proof and shock-absorbing.Aramid fabric is applied in fire-fighting suits,flame proof gloves,medical equipments,military products,aerospace and spaceflight and other different fields. 1. Bidirectional Kevlar/Aramid Fabric/Cloth Properties Ultri-High Strength-- 5-6 times of steel wire High Modulus-- 2-3 times of steel wire or glassfiber High Temperature Resistance Acid and Alkail Resistance 2. Applications Tires, Bullet-proof Vest, Aircraft, Spacecraft, Sporting Goods, Conveyor Belts, High Strength Ropes, Buildings and Cars etc.
Flame Retardant Resistant Aramid Staple Fiber, Kevlar Staple Fiber, Aramid Thread or Staple Fiber
Basalt Fiber Series Fabric 1. Production: basalt fiber fabric is made of continuous basalt fiber textile yarn through warping, weaving and coating. 2. Weaving methods according to requirements: unidirectional cloth, plain cloth, twill cloth and grid cloth. 2. Application: reinforced mesh cloth, fireproof cloth, fishing rod cloth, luggage decoration cloth, electrical insulation cloth, bulletproof cloth, etc. 3. Packaging: 100M / roll (or customized as required). 4. Performance: high strength, high temperature resistance, good electrical insulation, non hygroscopic, acid and alkali corrosion resistance.High temperature resistance 1000 �° C 5. Specification and model: bfw16 * 20-100 (120) BFW: basalt fiber fabric;Completely replace carbon fiber sheet building reinforcement 16 * 20: the warp and weft density of yarn is 16 and 20 pieces / cm respectively; 100: the width of the fabric is 100 cm; (120): the mass per unit area of fabric is 120 g / m2. BFNP5*5-200(160) BFNP: basalt fiber mesh cloth (coated and shaped); 5 * 5: the longitude and latitude mesh size of the cloth surface is 5 and 5mm; 200: the width of the grid is 200 cm; (160): the weight of grid cloth per unit area is 160g / m2.
Basalt Fiber Series Fabric 1. Production: basalt fiber fabric is made of continuous basalt fiber textile yarn through warping, weaving and coating. 2. Weaving methods according to requirements: unidirectional cloth, plain cloth, twill cloth and grid cloth. 2. Application: reinforced mesh cloth, fireproof cloth, fishing rod cloth, luggage decoration cloth, electrical insulation cloth, bulletproof cloth, etc. 3. Packaging: 100M / roll (or customized as required). 4. Performance: high strength, high temperature resistance, good electrical insulation, non hygroscopic, acid and alkali corrosion resistance. 5. Specification and model: bfw16 * 20-100 (120) BFW: basalt fiber fabric; 16 * 20: the warp and weft density of yarn is 16 and 20 pieces / cm respectively; 100: the width of the fabric is 100 cm; (120): the mass per unit area of fabric is 120 g / m2. BFNP5*5-200(160) BFNP: basalt fiber mesh cloth (coated and shaped); 5 * 5: the longitude and latitude mesh size of the cloth surface is 5 and 5mm; 200: the width of the grid is 200 cm; (160): the weight of grid cloth per unit area is 160g / m2.
Kevlar para aramid scrap available in Sri Lanka Please contact genuine buyer contact me on whatsapp
Quick Details Product Type:Aramid FabricSupply Type:In-Stock ItemsMaterial:100% Para Aramid Type:Kevlar FabricPattern:plainStyle:Plain Width:customizedTechnics:WovenUse:Aerospace, Car, Chemical, Firefighter, Garment, Industry, Metallurgy, Military, Petroleum, Tent, Underwear, Workwear Feature:Anti-Static, Bullet-Proof, Chemical-Resistant, Flame Retardant, Heat-Insulation, Non-Conducting, Radiation-ResistantYarn Count:1500DDensity:6.6X6.6 Weight:220gCertification:EN, NFPA, ULModel Number:scf-001 Width:10cm-200cm Product Description Material:100% kevlar fiber fabric yarn type:1500D kevlar K29 1414 Area Weight:220 g/m2 Width:100 cm/40" (can be made to 200cm width max) Pattern:plain weave Thickness:0.25 mm Color: yellow(kevlar original color) Modulus:590 gpd Breaking strength75 lb Elongation:3.35% Density:6.6 X 6.6 counts/cm Feature: -High strength and high modulus -Light weight and fatigue resistance -Abrasion and corrosion resistance -High temperature resistant Application: â?? Flame-resistant clothing â?? bulletproof vest and plate â?wear-resisting
Flame-retardant textile fabrics are specially designed materials that have undergone treatment to reduce their flammability. These fabrics are engineered to withstand exposure to flames or high temperatures, effectively slowing down the spread of fire and reducing the risk of ignition. These fabrics find extensive use in various industries and applications where fire safety is critical, such as: 1.Industrial Settings: Used in protective clothing for workers in industries like oil and gas, mining, and chemical processing where there is a risk of fire or thermal hazards. 2.Public Spaces: Utilized in public transportation (like trains and airplanes) and public buildings (such as theaters and hotels) to meet fire safety regulations and protect occupants. 3.Home Furnishings: Used in curtains, upholstery, and bedding to enhance fire safety in residential settings. Flame-retardant textiles are typically treated with chemical agents during manufacturing or finished with inherently flame-resistant fibers like modacrylic, aramid, or certain polyester blends. These fabrics undergo rigorous testing to meet industry standards and regulations for fire safety.
Kubba Tactical Bulletproof Helmet Helmet shape: PASGT Material: Aramid /Kevlar Protection Level: NIJ0106.01 II+NIJ0108.01 IIIA Bullets Stop: 9mm FMJ FN Shots Distance: 5M Size: S, M, L Color: Army green, , with embroidered Kubba logo Out covering: Polyurea printing Harness: 4 points suspension system, with mesh, and quick release buckle strap
Bulletproof helmet of the 1st class of protection Bulletproof Material Aramid Bulletproof Level NIJ IIIA 9mm & .44Magnum Suspension Standard Color Customized Size All Size Weight About 1.5k
Kubba Tactical Bulletproof Vest Exterior material: Polyester Insert material :Aramid /Kevlar Protection Level: NIJ 0101.06 Level IIIA Size: Small, Medium and Large Protection area : ,0.28ã?¡ for S, 0.30ã?¡ for Mï¼?0.32ã?¡ for L Bullets stop: 9mm FMJ RN; .44 Magnum SAP Material: UHMWPE Army green, with embroidered Kubba logo ,one logo in the front pocket cover and one at back of pocket cover Protection Part: Front, Back, Side Front and back plate pockets available Weight : 2.50±0.5kg
Aramid 1413- Ne10/2, 20/2, 20/3, 30/2, 30/3, 40/2, 40/3 , Aramid 1414, 400D/3, 600D/2, 1000D/3,
Firefighter Reflective / Protective Clothing (Bracket Support) Firefighter protective Clothing: 2019 models: Clothing outer fabric: The use of 210g arylon three anti-fabric, which not only has a permanent flame retardant, high temperature resistance, acid and alkali resistance and other properties, and its strong performance is very excellent, with high heat insulation, permanent flame retardant, high strength, anti-cutting, acid and alkali resistance, arc resistance and other characteristics, improve the overall protection performance of clothing, clothing overall main technical parameters are much higher than the industry standard and bidding technical requirements. The fire retardant performance of the firefighter\'s fire extinguishing suit: the warp and weft continuous burning time is 0s, the warp and weft damage length is less than 51mm; Breaking strength: longitude and latitude 1000N; Tear strength: longitude and latitude 120N; Moisture resistance 3, thermal stability: change rate 1.0%; Color fastness: Color resistance 4, water friction resistance 4. Waterproof breathable heat insulation layer: aramid non-woven fabric and flame retardant PTFE film, gram weight 180g/m2. It can not only prevent the infiltration of water and other general liquid chemicals, but also discharge a large amount of hot gas generated in the body during fire rescue in time. The fabric has hydrostatic pressure & 50kPa, moisture permeability 5439g/m2/24h, oil-repellent performance 3, and thermal shrinkage 1%. Comfort layer: The use of intermediate arylon fiber and flame retardant viscose fiber blended, gram weight 125g/m2, flame retardant performance, thermal stability and other properties are very good. Size: S/M/L/XL
Product Descriptions Woven Type: 3K Carbon Fiber Mix Dupont Kevlar Woven Woven Pattern:Twill/Plain/H Shape Fabric Thickness:0.2mm-0.28mm 2. Bidirectional Carbon Kevlar Fabric/Cloth Properties High Strength light Weight Corrosion Resistance 3. Material Advantage GDE Carbon Kevlar Fabric/Cloth selects raw materials with high quality carbon fiber and Dupont Kevlar, the fabric surface is black with color aramid, gloss and lint-free 4. Factory Good Price, Delivery Time and Best Services for PDI&After-sales Application 1. Airspace,Sporting goods,Mechanical equipment,ship building,Automobile,Advertising panels 2. Construction,increase building use load. 3. Material aging. 4. Concrete strength grade is lower than the design value. 5. Structural cracks processing 6. Harsh enviroment service component repair,protective. 7.Other purposes:industrial products and many other fields.
Aramid fiber fabric has ultra-high strength, high modulus and high temperature resistance, acid and alkali resistance, light and other good performance, its strength is 5-6 times of steel wire, the modulus is 2-3 times of the steel wire or glass fiber, its toughness is 2 times of the steel wire while it only weighs about 1/5 of steel wire. In around a temperature of 560, it does not decompose and melt. I t has a good insulation and anti-aging properties with a long life cycle. Main application: Tires, bullet-proof vest, aircraft,spacecraft, sporting goods, conveyor belts, high strength ropes, constructions and cars etc. Material: 100% Aramid fiber Weight: 80-500 gsm Weave: Plain/twill/unidirectional Thickness: 0.1-1mm Width: 100-1500mm Features: anti static, bulletproof and chemical resistant.
Dear Sir We can supply aramid fiber scrap from korea. it is kevlar fabrics.
Stock solution aramid 1313 flame retardant and fireproof fabric weft woven air layer high temperature resistant fabric 650gsm aramid 1414 flame retardant wool fabric heat insulation fire resistance high temperature protection high-performance fabric
Aramid fabrics your ultimate protection! Are you in search of materials that offer unparalleled strength, durability, and heat resistance? Look no further! Aramid fabrics are here to revolutionize your world. Key Features: â?¢ High Strength: Aramid fabrics, including Kevlar and Nomex, boast a strength-to-weight ratio that outperforms steel, making them the ideal choice for applications where strength is paramount. â?¢ Heat Resistance: Our aramid fabrics are built to withstand extreme temperatures. They're the top choice for protective clothing for firefighters, industrial workers, and motorsports enthusiasts. â?¢ Cut and Abrasion Resistance: When it comes to protection against sharp objects and abrasive materials, aramid fabrics stand strong. Bulletproof vests, industrial gloves, and more rely on their exceptional resistance.
Aramid/Nomex/Kavlar Air Slide Fabrics General introduction of aramid air slide fabric: Aramid air slide fabric also called Nomex air slide fabric and Kevlar air slide fabric in the market due to the raw material from the different suppliers. According to the different working circumstance, the aramid materials from Zonel Filtech were adopted the aramid 1313 (similar to Nomex) and aramid 1414 (similar to Kevlar) according to the certain working circumstances. Aramide air slide fabric, nomex air slide membrane, kavlar air slide membrane The Aramid 1414 air slide fabric which is fire proof, high tensile strength and abrasion resistance, longer service life, the maximum operation temperature resistance even up to 250degree C. Aramide air slide fabric, nomex air slide membrane, kavlar air slide membrane For the aramid 1313 air slide fabric, which is the high temperature resistance air slide fabric as well, this aramid air slide belt continuous operation temperature can up to 200degree C, maximum peaks can up to 220degree C. This aramid air slide belt with shorter operation life and lower operation temperature, but can offer a more economical solutions for some special air slide systems. Aramide air slide fabric, nomex air slide membrane, kavlar air slide membrane Aramid fiber also can be needle punched into nonwoven aramid air slide fabric (Nomex nonwoven air slide fabric) and offer some economical solutions for the air slide systems or homogenization systems. Relevant specification of the aramid air slide cloth from Zonel Filtech: Thickness of the aramid air slide membrane: 3~10 mm can be customized. Width of the aramid (Nomex) air slide belt: max. 2.4 meters. Air permeability: can be customized as requirements. Tensile strength: > 5000N/4cm. Temperature resistance: -60~250 degree C. Properties: 1. Clear veins, stable size, high tensile strength, various materials for choosing according to the different requirements. 2. Equal air permeability, the tolerance of air resistance is within ±10%. 3. High temperature resistance, abrasion resistance, little hygroscopicity, corrosion resistance, lower adhesive capacity, never delamination, longer service life. 4. Smooth surface, 100% new materials, won't leak dust, green products. 5. The products applicable to convey the materials with the particle diameter < 4mm, temperature < 250degree C, the moisture content < 2%. Applications: For some high temperature particles/dry powder air slide conveying.
Fabric Friction/Rubberized Fabric Tire Cord - Uncured Rubber Scrap - Is byproduct from creating reinforced tire walls - Nylon, Polyester, Kevlar, and Fiberglass fabric substrate - Grade A Unvulcanized Rubber
