Full Welded Ball Valve Suppliers and Manufacturers

Full Welded Ball Valve The seat of full welded ball valve is made of carbonized Teflon seal ring and spring. It has strong adaptability for changes in pressure and temperature. And it does not occur any slippage problem within specified pressure and temperature range. Specification: Size:6~40 (Full Bore), 3~36 (Reduce Bore) Pressure Rating: Class150~1500LB Main Materials: A105, LF2, F304, F316, F304L, F316L, etc. Design and Manufacture: API 6D, API608. Face-to-Face:ASME B16.10, API 6D, JIS B2002. Anti-static: API 6D and ISO 17292. Ends Connection: Flange, Butt Welding Fire Proof: API 607 Inspection & Testing: API 598, API 6D Operator: Manual, Gear, Electric, Pneumatic. Feature: Fully welded body  Metal or soft seated  Anti blow out stem  Self lubricated bearing

The pressure in the pine line push the seat ring moving towards ball, thus form the sealing; as the sealing is formed by the line pressure itself, the performance will be better, in the mean time, it also reduced the operation torque of the actuator; while the ball cavity pressure exceed the line pressure, the pressure difference will push the seat off the ball to release the excessive pressure to the pipe pine; when the temperature rises, it wont cause abnormal pressure rise in the valve cavity. The pressure can be released to zero when the valve is in full close, full open or under pipe line pressure; also, the seeper, dirt or deposit can also be eliminated by removing the drainage plug on the valve body In case the sealing element is destroyed by eye winker in the pipe line or smashing, sealant will be used to avoid leakage; the stem is designed with two part sealing, and sealant can be injected between. ven when the seal is burned down by fire, the metal to metal seal design will be applied to avoid spread of fire. Body to use high quality forged steel, with welding on the mid body, formed one piece; appearance design, high strength, light in weight, smart in volume; bolts and nuts are not adopted, thus no leakage point; suitable for under ground application. he ball is supported by upper stem and the lower trunnion; the ball axle is maintained in its centerline, thus is good in sealing and operation; the low friction TFE in the stem and trunnion part enables the valve to operate smoothly and simply under pressure. The ball valve series is maintenance free, thus greatly reduced userí»s cost; the bearing, seal are adopt low friction co efficiency material, no lubricate is required

Ball valve type: trunnion mounted ball valve. Valve body materials: f304, f304l, f316 and f316l. Standards: en 12266. Pressure: 150-2500lb (pn1.6-42mpa). Applicable temperature: -196 to 650 degrees celsius. Connection: flanged and butt-welded. Valve size range: 1/2-36 inch (dn15-900mm). Chinese Industrial Valve Co., Ltd is a leading manufacturer which provides industrial valves, ball valves, check valves, butterfly valves, gate valves, globe valves, plug valves and pressure relief valves and so on. If you are interested in our products, pls visit our website or email us at any time: chinese@jeawin.com and our website is : http://www.chinesevalves.com/ Any questions, please call: 86-592-5204188.

Min.Order Quantity: 10 Set/Sets Supply Ability: 20000 Ton/Tons per Year Full of Welded ball valve Industrial Supply capacity is large Port: Tianjin xingang Shanghai Port Ningbo Port Payment Terms: L/C,T/T,Western Union,MoneyGram Quick Details Certification: ISO9001&14001 Power of product: worm gear Ball Valve Material of product: Full of Welded ball valve Pressure of product: PN25 PN16 ball valve Standard of product: ANSI Industrial Ball Valve Size of product: 6 inch Ball Valve Nature of the campany: Manufacturer Main item: Ball valve and all kinds of flanges,valves Factory history: Since 1996s Packaging & Delivery Packaging Details: Woven bag, wooden box, wooden pallet with plastic film, container (we can change the shape of the packaging according to customer requirements) Delivery Detail: Shipped in 30 days after payment The Usage of Full of Welded ball valve Industrial worm gear 6 inch Ball Valve PN16-25 The Full of Welded ball valve Industrial worm gear 6 inch Ball Valve PN16-25 is installed on the pipelines of water supply,vapour, central heating ect.(ISO 9001:2000 certification)   The Function of Full of Welded ball valve Industrial worm gear 6 inch Ball Valve PN16-25   Type Nominal pressure(MPa) Testing pressure Suitable temperature(°C) Suitable medium Strength (water) (MPa) Enclose (Water) (MPa) Q41 /61 H-16C 1.6 2.4 1.76 -40~200?? Water,Vapour,Oil Q41 /61 H-25C 2.5 3.75 2.5     The mateirals of  Full of Welded ball valve Industrial worm gear 6 inch Ball Valve PN16-25 Parts name Material Valve body steel ST37 ball carbon steel SUS 304 seal ball /pole RPTFE stem SUS 304 The main vlalve products of our company include (1) ANSI gate valve, DIN gate valve, GOST gate valve, Soft sealing gate valve, Knife gate vave, Flat gate valve (2)Wafer type butterfly valve, flange type butterlfy valve, single eccentric butterfly valve, double eccentric butterfly valve, Three eccentric buterrfly valve (3)Check valve, lift check valve, swing check valve, wafer type check valve, spring check valve (4) ball valve, tee ball valve, 4 way ball valve, welding ball valve (5)strainer, filter, Y type strianer Materials WCB A216 ; Q235,ST37 ; LBC/LCC ; WC6/WC9 ; WCC ; CA15 A217 ; M-30C ; H.B/H.C ; HT250/GG25 ; GGG40 ; SS304 ; SS304L ; SS316 ; SS316L THE MAIN TYPE AND MATERIAL OF OUR VALVE

Features 1.Tow or Three pieces body 2.Fire-safe, antistatic and blow-out proof stem functions 3.Up stream sealing,down stream sealing,double sealing 4.Self relieving seat 5.Double block and bleed(DBB)function 6.Emergency sealant injection system 7.Stem/bonnet extension for cryogenic service Operation type Handwheel,Gear, Electric actuator,Pneumatic actuator,Bare stem Standard Design and Manufacture:API 6D,API608,BS5351 or ASME B16.34 Inspection and Test:API 598/API 6D End flange dimension:ASME B16.5,ASME B16.47(API 605 ,MSS SP44) Butt weld end dimension:ASME B16.25(BW) Face to face,end to end:ASME B16.10/API 6D Pressure-temperature ratings:ASME B16.34 NACE: NACE 0175 Material ASTM A216 WCB WCC;ASTM A217 WC1 WC6 WC9;ASTM A351 CF8,A351 CF8M, A351 CF3,A351 CF3M,A351 CN7M;.ASTM A352 LC1 LCB LCC LC3(Cast Steel, Alloy Steel, Stainless Steel, Special Steel) According to customer's require

Ball valve

Full welded ball valves used in district heating system

*ball valve O floating ball valve O trunnion mounted ball valve O top entry ball valve O full welding ball valve O orbit ball valve *ball valve O floating ball valve O trunnion mounted ball valve O top entry ball valve O full welding ball valve O orbit ball valve

Zhejiang Jinpu industry Co., LTD., located Wenzhou, "China Pump & Valve hometown". Our company has passed CE, ISO9001, API6D, and we enjoys good reputation in the valve industry with company area more than 20000 square meters, 50 million RMB registered capital, advanced production and test machines, more than 120 staffs, 30 professionals, 12 engineers, which are the main reason of becoming the one of leading manufacturers in the China. Quality assurance depends on advanced equipment, such as vertical lathe, high performance horizontal machining center, numerically-controlled machine, drilling machine, welding machine & test machine etc; our company is fully equipped with them. Our main product: Ball valve, gate valve, check valve & globe valve. Up to now, our company's products are acceptable by worldwide customer, just like, USA, Japan, Europe & Middle East etc. In order to offer our customer better service, our boss always need all of the staffs to say something advice of improvement and respond customer's demand instantly. In the meantime, a piece of words always keep us in mind, "Golden quality, Sailing around the world'. Product Name Full-welded ball valve Nominal Diameter 2"~48"(50mm~1200mm) Operating temperature -196ºC~593ºC(the temperature will be changed by different materials) Operating pressure 150-2500 CLASS Steel Material Main material: A105N;A182 F304, F304L, F316, F316L, A352 LF2, etc. Design standard API 6D, ASME B16.34 Face to Face Dimension ASME B16.10 End Connection Dimension ASME B16.5, ASME B16.25 Test standard API 598, ISO 5208, API 6D

Name: Trunnion ball valve Model: ball valve Size: 2"--26" Pressure:150#--1500# Product Material: Carbon&Lowalloy steel/STL/Nickel bare alloy Infomation: Ball valves featuring with 2-PC or 3-PC split body, trunnion mounted ball. This type of valves has advantage of less weighted and cost effective. It is ideal for frequent on-off flow control in big size and high pressure pipeline. SHOV ball valves are fire safe test certified by TUV API607. Design Standard: Basic Design: API 6D Test: API 6D, BS 6755, API 607, API 6FA Size ranges 2¡±-26¡± RATING 150LB-1500LB MATERIAL Carbon Steel ,Stainless Steel Trim: A105+ENP, 13Cr, F304, F316 Design features: Full port or Reduce port Hard Facing Seat and Ball Metal Seated Design Cavity pressure self relief Blowout-proof stem Anti-static device Fire safe design Products range SIZE RANGES 2¡±-26¡± RATING 150-1500 Material Carbon Steel ,Stainless Steel Application: On shore oil & gas Off shore oil & gas Refinery.