Base material copper: In accordance with EU-standard: DIN EN 13602 (Cu-ETP, Cu-ETP1, Cu-Of, Cu-Of1) In accordance with US-standard: ASTM B 224 - 80 Available in different strength classes according to DIN EN 13599 Optional coating on the base material: Tin (Sn), Silver (Ag), Nickel (Ni) and others on request Dimensions: Thickness from 0.017 to 1.200 mm Width from 0.200 to 24.000 mm 6.000 mm width made of cut strip, re-rolled Designs:
Spring steel strip Steel grade 65Mn,1065,SAE1055,1045,CK50,CK55, CK60,CK67, CK70,CK75, C75Cr1,50CrV4, 51CrV4, 60Si2Mn, etc Thickness 0.08-4.0mm Width 3-400mm Hardness <200HV, 200-300HV, 300-550HV Edge slit edge; both rounded; one side round, one side slit; square etc Surface polished (blue, yellow, white, grey-blue, black, bright) or Nature etc Tolerance thickness +/-0.01mm max; width +/-0.05mm max Physical propety Tensile strength: 450-1850N/mm2
We are the exporter flat strip. Specification: 1) trash 5% to 7% 2) high quality 3) we can supply quantity as per customers demand Each bale weighs approximately 160 kgs with fully pressed in cotton cloth cover.
We are the exporter flat strip. Specification: 1) trash 5% to 7% 2) high quality 3) we can supply quantity as per customers demand Each bale weighs approximately 160 kgs with fully pressed in cotton cloth cover. Each container contains 150 to 160 bales.
Gframe Flat Strip is supplied in rolls weighing around 100Kg. The length is cut according to design requirements. It used in partitions of heights above 3.5m. Applications: Partition System Lining System Specifications: Thickness Unit: mm Value: 0.55 / 0.6 / 0.7 / 0.8 / 0.9 / 1.00 / 1.2 / 1.5 Standards: ASTM C1396
Commodity : COTTON WASTE FLAT STRIPS Length : 21mm to 25 mm Trash : 11% to 15 % Packing : Press Bales ( 140-155 kg ) All values are aproximately
Full Grain Leather Straps for Belt and Craft purpose.
SCPCRFC-8 with flat lid 250*8strips/box Flat PCR Cap, Strip of 8 are used for PCR applications and work with the 96-well PCR plates and strip tubes. These cap strips are available in either 8- or 12-cap strips. The Flat PCR Cap Strips signature flat cap allows you to label each sample.
SCPCRFC-8 with flat lid 250*8strips/box Flat PCR Cap, Strip of 8 are used for PCR applications and work with the 96-well PCR plates and strip tubes. These cap strips are available in either 8- or 12-cap strips. The Flat PCR Cap Strips signature flat cap allows you to label each sample.
Hook Strip Flat Screen Detail: Hook strip flat screens are the series applied most widely at present. These products can be fit for all kinds of shale shakers that use the hook strip flat screen. This screen panel is constructed with two or three stainless steel layers bonded to a steel support plank. Accessory rubber plugs may be inserted to the rips or tears of the screen. By doing this, we can cut down time and the production cost. We can supply hook strip flat screens with mesh sizes ranging from ,to 275. Features of Hook strip flat screens nt density. To arrange these layers reasonably and exactly, the screening effect will become more and better. Screen with different mesh counts with suitable opening sizes of the backing plate. Doing so, our products will obtain the largest effective area under the condition of enough strength. The bottom layer with low mesh counts has coarse wire and can be tight bonded to the backing to make up one block. So the strength of whole screen mesh get up and the useful life is increased. The mesh, divided into many independent small units by grids of the backing plate, can prevent rigs of tears from spreading overmuch. Accessory prepared rubber stoppers can be used to repair damages. By doing so, the operator can cut down the stop time and reduce the cost. Screen Model Range of Mesh Dimension (Length Width) Brand & Model Of Shaker Weight (Kg) PDHF-1 16-325 903 1155mm BEM-3 5.6 PDHF-2 16-325 1141mm ALS-11 9 PDHF-3 16-325 1050mm FLC500 Series 6 PDHF-4 16-325 1053mm FLC2000 4.2 PDHF-5 16-325 846mm FLC313M 4 PDHF-6 16-325 915 1150mm LCM-20 8.6 PDHF-7 16-325 720 1220mm KTL48 Series 5.6 PDHF-8 16-250 700 1165mm S250 4.6 PDHF-9 16-250 1 1280mm ZX60 9.2
Product Details Plug Style: British standard plug Certification: SASO Type:With RCD switch, 5 gang, Extension Wire Type: 3*1.5mm2, the length is per request Product Feature:Operating Voltage:250V AC 50/60Hz Rated Current: 6A Operating Temperature:-40-70â?? Advantage:full shutter, children protection Poly carbonate, fire resistant High quality copper, comply with IEC standard Application:Home appliances,Home electronics,Office equipment,Power tools,Computer hardware
(round sheathed cable, flat sheathed cable, coaxial cable) This fully automatic flat sheathed cable stripping machine uses hybrid drive, SMC pneumatic components, microcomputer full LCD control system, with a wheel function to improve the length and stability of the stripping length. ) flat sheathed cable: outer jacket and insulation of core wires can be one-time processing completed. ) round sheathed cable: outer jacket can be stripped only. Stripping Flat Sheathed Cable Stripping Round Sheathed Cable: Model No. BJ-900 Function Wire cutting, both-ends stripping, middle stripping Applicable Wire Size 0.1-10 Sq.mm (AWG32-AWG10) Speed 1000-4000 pieces per hour (decided by wire) Wire Cutting 0.1-99999.9mm Stripping section 13 Wire Stripping Strip front: 0.1-250mm Strip tail:0.1-70mm Motor accuracy 0.1mm per step by mute stepper motor Function Automatic wire inlet/outlet, timing start Driven Mode 4 wheels Machine Size 420(L)mmx297(w)mmx345(H)mm Net Weight 28KGS Cutter Material Imported Tungsten Steel or High speed Steel
We deals in the following products of India, China, Taiwan and Korea Origin:- Aluminium Strips
We deals in the following products of India, China, Taiwan and Korea Origin:- Galvanized Steel (Galvanized Steel Tapes, Galvanized Steel Wires, Galvanized Steel Strips, Galvanized Steel Coils, Galvanized tubes etc)
We deals in the following products of India, China, Taiwan and Korea Origin:- Cold Rolled Steel (Cold Rolled Steel Strips, Cold Rolled Steel Coils, Cold Rolled Sheets etc.)
We deals in the following products of India, China, Taiwan and Korea Origin:- 1)Hot Rolled Steel (Hot Rolled Sheets, Hot Rolled Coils, Hot Rolled Plates, Hot Rolled Bars etc) 2)Galvanized Steel (Galvanized Steel Tapes, Galvanized Steel Wires, Galvanized Steel Strips, Galvanized Steel Coils, Galvanized tubes etc) 3)Cold Rolled Steel (Cold Rolled Steel Strips, Cold Rolled Steel Coils, Cold Rolled Sheets etc) 4)Stainless Steel (Stainless Steel Strips, Stainless Steel Coils, Stainless Steel Wire, Hardened and Tempered Spring Steel, Stainless Spring Steel, Spring Steel Wires etc) 5)Steel Tube and Pipes ( ERW, CRW, CRS, Black, Galvanized, Stainless ) 6)Forged Column Clamps, Girder Clamps, Pressed Clamps, Rapid Clamps, Support Clamps & Wedge Clamps. 7)Heavy Duty Props & Light Duty Props. 8)Nuts, Bolts, Nails & Fastners 9)System Scaffolding, Base Plate & Adjustable Base. 10)Steel Tie Rod, Waller Plates and Wing Nuts. 11)Drop Forged and Pressed Sheet Metal Couplers of all types. 12)Steel Billets, Steel Angle & Steel Channels.
Product feature: The machine using the hybrid drive microcomputer lcd display control system, cutting, stripping and both-ends splitting in red white flat ribbon cable, blue white flat ribbon cable, gray flat ribbon cable, double flat ribbon cable can be finalized in one time, computer control both-ends splitting length, does not require the replacement of mold, operation is simple and easy to understand. Machine working video Technical parameters Mode Bj-900+t Function Flat ribbon cable cutting, both-ends stripping and splitting, intermediate stripping Applicable wire range 2 pins-12pins Processing speed 2000-4000 pieces per hour (decide by wire material) Cutting length 0.1mm-99999.9mm Intermediate stripping nos. 13 strips Stripping length Stripping wire head: 0.1-25mm stripping wire tail:0.1-20mm Accuracy of entry & outlet wire motor Mute hybrid stepping motor 0.1mm per step Remark function Auto-entry wire, auto-outlet wire, timing start Driving mode Six wheels driven Dimension 510x340x340mm Net weight 40kg Cutter material Import tungsten steel/highspeed steel
SCPCRWF-8H 0.2ml Transparent 8-tube flat cover with 8 covers 125*8strips/box 2.95 49 X 31 X 22 0.2ML 8-STRIPS PCR TUBE WITH 8-STRIPS FLAT CAPS Made From virgin polypropylene. Compatible with most thermal cyclers. Certified DNase, RNase&Pyrogen free. PCR Tubes, 8-Strip Tubes 1. 0.1ml/0.2ml 8-strip PCR Tubesboth have clear and white color can apply to general PCR and qPCR reactions. 2. The caps are very easy to open and close. 3. Various colors of 0.2ml 8-strip PCR Tubes can be chosen. It will be easy to classify and store samples. 4. Caps and tubes can be purchased separately. 5. Flat and Semi-Domed Caps are available 6. Compatible with most thermal cyclers. 7. 125strips/bag, 10bags/ctn.
65Mn CK67 high carbon cold rolled spring steel strip Hardened and Tempered Steel Strip Hardened and Tempered is a thermal process that strengthens steel strips through a controlled heating and cooling process. The hardening process involves heating the steel strip to above the rapidly cooling. The steel strip in this condition is extremely brittle and requires further treatment in the tempering. Then strips are reheated to a lower temperature and holding it at the given temperature for a given period of time. This process is done in an inert atmosphere to avoid oxidation. This type of steel strip has big degree of toughness and has excellent spring properties Standard AISI, ASTM, BS, DIN, GB, JIS Place of Origin China Material Hot Rolled Surface Polished Application shutter door, plastic trowel, bricklayer trowel, putty knives, scraper, springs, metal part, shoe insole, shoe accessories, blade, band saw blade Brand Name HENSON Width 2.0mm-300.0mm Length Customize Tolerance +/-10% Hardness 40-55HRC Surface nature, blue, yellow, white, polish Edge Slit,Round,Square MOQ 1000KGS Tolerance thickness+/-0.01mm max,width +/-0.05mm max Type strip,coil,sheet Coil ID 300-500 mm Tensile Strength 540-1575N/mm2 Yield Strength 370-1475N/mm2
65Mn CK67 high carbon cold rolled spring steel strip Hardened and Tempered Steel Strip Hardened and Tempered is a thermal process that strengthens steel strips through a controlled heating and cooling process. The hardening process involves heating the steel strip to above the rapidly cooling. The steel strip in this condition is extremely brittle and requires further treatment in the tempering. Then strips are reheated to a lower temperature and holding it at the given temperature for a given period of time. This process is done in an inert atmosphere to avoid oxidation. This type of steel strip has big degree of toughness and has excellent spring properties Standard AISI, ASTM, BS, DIN, GB, JIS Place of Origin China Material Hot Rolled Surface Polished Application shutter door, plastic trowel, bricklayer trowel, putty knives, scraper, springs, metal part, shoe insole, shoe accessories, blade, band saw blade Brand Name HENSON Width 2.0mm-300.0mm Length Customize Tolerance +/-10% Hardness 40-55HRC Surface nature, blue, yellow, white, polish Edge Slit,Round,Square MOQ 1000KGS Tolerance thickness+/-0.01mm max,width +/-0.05mm max Type strip,coil,sheet Coil ID 300-500 mm Tensile Strength 540-1575N/mm2 Yield Strength 370-1475N/mm2
