Finished Bore Hard Teeth Chain And Sprocket Suppliers and Manufacturers

We supply high maltose corn syrup which improves the flavor, body, and texture of the food and imparts resistance to the color formation, moisture, absorption, and crystallization in finished products such as hard candies. This corn syrup provides exceptional stability, clarity, and brilliance in finished products. TEXTURE & FEATURE: Clear Colorless, Odorless Viscous Syrup, free from rancidity and foreign matter. APPLICATION: This high maltose syrup improves flavor, body, and texture at high sucrose replacement levels while imparting resistance to the color formation, moisture, absorption, and crystallization in finished products such as hard candies. It provides exceptional Stability, clarity, and brilliance in finished products.

DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.

POM Regrind from zipper Teeth, industry lump, industry runner Definition of POM resin (polyformaldehyde resin): polyformaldehyde is a linear polymer without side chain, high density and high crystalline properties. According to different chemical structures in the molecular chain, there are two types of homoformaldehyde and copolymers. of both types of polyformaldehyde density, high crystallinity, melting point, but thermal stability, the treatment temperature range is narrow (about 10oC), slightly lower in acid and alkali stability; The density of formaldehyde, melting point, strength and copolymer is lower, but good thermal stability, not easy to decompose, wide range of treatment temperature (about 50oC), acid and alkali stability are good . Plastic has excellent all-round performance. Good physical, mechanical and chemical properties, especially with excellent friction resistance. It is commonly referred to as steel or strip, which is the general engineering plastic third. Suitable for reducing wear on parts, transmitters, chemicals, tools and other parts. One of the synthetic resins, also known as polyformaldehyde resin, POM resin and steel, etc. This is a kind of white or black plastic resin with high hardness, high steel and high wear resistance. Used for gears, bearings, auto parts, machine tools, tools, etc. MATERIAL: POM Regrind from zipper Teeth , industry lump, industry runner CATEGORY: POM TYPE: Regrind SPECIFICATION: from zipper Teeth , industry lump, industry runner,Qty per month 52 mt Origin: Bangladesh LOADING WEIGHT: 24 Ton FOB (USD/Ton): 650$ - 850$ Packaging: Jumbo Bag Est. Shipping Time: 15, 30, 45 days

HIPS repro pellet mixed color from yoghurt caps HIPS Recycled Pellets Thermoplastics PS has two representatives, GPPS and HIPS. In particular, PS HIPS plastic is the most popular to many advantages and applications. HIPS belongs to the group of hard, transparent resins that are easy to create color, processed by laminating film lamination and easy laminating technology. What is HIPS PLASTIC ? HIPS pellet stands for High Impact Polystyrene. Polystyrene has the chemical formula Polystyrene (C8H8)n which is a long chain hydrocarbon in which alternating carbon centers are attached to the phenyl group (the name given to the aromatic benzene ring). MATERIAL: HIPS repro pellet mixed color from yoghurt caps CATEGORY: HIPS repro TYPE: Pellet GRADE: Mixed color SPECIFICATION: Mixed color.from yoghurt caps Origin: Tunisia LOADING WEIGHT: 23 Ton FOB (USD/Ton): 900$ - 1150$ Packaging: Jumbo Bag Est. Shipping Time: 15, 30, 45 days

Indonesia origin wood working Manufacturer offering vary kind of Tropical Hard , Medium Light Hardwood (MLH) and soft wood ( Albazia Falcataria ) ****** Lumber with KD ***** S4S Molding finished ******* or others products by demand ***** Sizes by demand ***** Please contact us for further details

PRODUCT INFO Winter melon are large fruits, averaging 15 to 80 centimeters in length, and have a bulbous, round to oblong shape with blunt, curved ends. The melons are covered in a thin but tough, light to dark green skin, often enveloped in a textured, chalky layer of wax, depending on the variety. Young Winter melons also bear a pale, fuzzy coating of hair that disappears as the fruit matures. Underneath the hard surface, the flesh is thick, firm, aqueous, and white, encasing a large central cavity filled with pithy membranes and cream-colored oval seeds. The seeds are edible once cooked and have a nutty, neutral taste. Winter melons are not typically consumed raw and contain a mild, vegetal, and subtly grassy flavor reminiscent of a watermelon rind or cucumber. When cooked, the flesh becomes transparent and softens, absorbing accompanying flavors. USES Winter melons are an excellent source of vitamin C to strengthen the immune system and fiber to stimulate and regulate the digestive tract. The fruits also provide antioxidants to protect the body against environmental aggressors, magnesium to maintain healthy nerve functioning, phosphorus and calcium to promote strong bones and teeth, and contain lower amounts of folate, zinc, and iron. In Traditional Chinese Medicine, Winter melons are viewed as a cooling or yin ingredient and are used to reduce inflammation and balance the body through their alkaline properties. SEASON Winter melons are available year-round, with a peak harvest in the late summer through fall.

Polished 304 Stainless Pipe is a standard stainless pipe that has been polished to a 180 Grit Brushed Finish on its exterior for cosmetic and ornamental applications. Unlike the dull mill finish of standard stainless pipe, this polished stainless steel pipe allows your projects to have a more finished look with excellent corrosion resistance making it ideal for handrails, architectural design, restaurant and store fixtures, trade show displays, marine components and more. Just like standard stainless pipe it has an interior weld seam. SPECIFICATIONS: Type 304/304L Welded, ASTM A312 FINISH: 180 Grit Polish, Brushed Finish CHARACTERISTICS: Welding = Excellent Machining / Grinding = Fair Bending / Forming = Good Wear Resistance = Excellent Corrosion Resistance = Excellent MECHANICAL PROPERTIES: Tensile Strength = 85,800 psi Yield Point = 34,000 psi Elongation = 60% in 2" ; Elasticity = 29,000 ksi Shearing Strength = 11,500 psi Brinell Hardness = 170; Density = .289 lb/in AVAILABLE LENGTHS: 4ft. 6ft, 8ft, 10ft, 20ft, or Cut to Size

StandardASTMROSHAISIDINENGBJIS LengthCustomized Thickness 005300mm Width Customized Surface 2BBANO3NO4HLNO1Mirror Material 301 sus301 X12CrNi1707Cr17Ni71431 Hardness 14H12H34HHO Grade C Si Mn P S Ni Cr Mo Cu N Ti SUS301 015 100 200 0045 0030 6080 1618 025 Mechanical Properties Grade State Hardness HV Yield Strength Tensile Strength Enlongation SUS301 ANN 250 205 520 40 14H 250310 470 780 35 12H 310370 510 930 10 34H 370430 745 1130 5 H 430490 1030 1320 3 EN 490550 1275 1570 Surface Finish Surface Finish Definition Application 2B Those finishedafter cold rollingby heat treatmentpicking or other equivalent treatment and lastly by cold rolling to given appropriate luster Medical equipmentFood industryConstruction materialKitchen utensils BA Those processed with bright heat treament after cold rolling Kitchen utensilsElectric equipmentBuilding construction NO3 Those finished by polishing with No100 to No120 abrasives specified in JIS R6001 Kitchen utensilsBuilding construction NO4 Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size Kitchen utensilsBuilding constructionMedical equipment HL Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size Building construction NO1 The surface finished by heat treatment and picking or processes corresponding there to after hot rolling Chemical tankpipe

StandardASTMROSHAISIDINENGBJIS LengthCustomized Thickness 005300mm Width Customized Surface 2BBANO3NO4HLNO1Mirror Material 3040Cr18Ni9A182F304SUSF30414301 Hardness 14H12H34HHO Chemical Composition Grade C Si Mn P S Ni Cr Mo Cu N Ti SUS304 008 100 200 0045 0030 80100 1820 Mechanical Properties Grade State Hardness HV Yield Strength Tensile Strength Enlongation SUS304 ANN 200 205 520 40 14H 200250 225 550 35 12H 250310 470 780 6 34H 310370 665 930 3 H 370430 880 1130 Surfce Finish Definition Application 2B Those finishedafter cold rollingby heat treatmentpicking or other equivalent treatment and lastly by cold rolling to given appropriate luster Medical equipmentFood industryConstruction materialKitchen utensils BA Those processed with bright heat treament after cold rolling Kitchen utensilsElectric equipmentBuilding construction NO3 Those finished by polishing with No100 to No120 abrasives specified in JIS R6001 Kitchen utensilsBuilding construction NO4 Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size Kitchen utensilsBuilding constructionMedical equipment HL Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size Building construction NO1 The surface finished by heat treatment and picking or processes corresponding there to after hot rolling Chemical tankpipe

High-Quality Birch Wood Logs and Lumber for Sale Birch Wood Logs Species: Silver Birch (Betula pendula), Yellow Birch (Betula alleghaniensis) Grade: Prime, Standard, Industrial Diameter: 250 mm to 800 mm Length: 2.4 meters to 5.0 meters Birch Wood Lumber Type: Edged and Unedged Grade: FAS, Select & Better, #1 Common, #2 Common Thickness: Rough Sawn: 25 mm, 32 mm, 38 mm, 50 mm, 63 mm, 75 mm, 100 mm Finished: 20 mm, 25 mm, 30 mm, 40 mm, 50 mm, 60 mm, 80 mm Width: Edged: 100 mm to 300 mm Unedged: Random widths Length: 2.0 meters to 5.0 meters Characteristics Color: Light yellow to pale white, sometimes with a reddish hue Grain: Straight with a fine, even texture Density: Approximately 0.65 g/cm�³ Hardness: Janka hardness of about 1,260 lbf (5,600 N) Moisture Content: Typically dried to 8-12% for indoor use, 12-15% for outdoor use Applications Furniture: Chairs, tables, cabinets Flooring: Durable and attractive hardwood flooring Plywood: Commonly used in the manufacture of high-quality plywood Turnery: Handles, toys, and other turned objects

Innovative technology of pre-materials suitable for gas springs welded and drawn according to ASTM A213 various ID tolerance requirement of H8, H9, H10 and H11 surface roughness below 15RA (0.40 �¼m) mechanical properties are controlled to endure excessive stress hardness, tensile strength, yield strength and elongation servicing high precision pneumatic cylinder applications ODï¼?mm) ID(mm) WT(mm) ID Tolerances,+0/-0.05) Specifications Materials Surface Finish(max) 15.0 13.0 1.0 CGS-031,H9 A213 SAE1010/#10; SEA1020/#20 ;Q235; 304L;316L ID < 20 RA

430 Stainless Steel Strip Specifications Grade: 430 Standard: ASTM/EN/JIS Thickness: 0.03mm-5.0 mm Width: 8.5mm-600 mm Length: coil type or it can be produced as customer requirements Surface Finish: NO.1, 2B, 2H(Rerolled Bright), BA, No.4, 8K (Mirror), HL (Hairline), Polishing Bright, etc Edge: Mill Edge, Slit Edge, Deburred Edge, Round Edge, V Type Edge 430 Stainless Steel Strip Introductions 430 stainless steel strip is a general purpose stainless steel with good corrosion resistance. It has better thermal conductivity than austenite grade stainless steel strip, a smaller thermal expansion coefficient than austenite strip, heat fatigue resistance. Due to addition of stabilizing element titanium, it has good mechanical properties of welding. Because of its chromium content, it is also called 18/0 or 18-0. Compared with 18/8 and 18/10, it contains slightly less chromium, and the hardness is correspondingly lower. 430 Stainless Steel Strip Applications 430 stainless steel strip is widely used for building decoration, fuel heating parts, hot water supply systems, household appliances, banding systems, home appliance parts and hareware. 430 Stainless Steel Strip Chemical Composition The chemical components of grade 430 stainless steel strip is summarized in the following table: Grade Standard C Si Mn P S Cr Ni Mo 430 ASTM A240 0.12 0.75 1.00 0.040 0.030 16.00-18.00 0.75

The properties of stainless steel are corrosion resistance, high ductility, attractive appearance and low maintenance. Stainless steel contains chromium which provides the properties of corrosion resistance at high temperatures. Stainless steel can withstand corrosive or chemical environments due to its smooth surface. Stainless steel products are safe for long-term use with excellent resistance of corrosion fatigue. Product Specification and Steel Grade ASTM JIS AISI EN Mill\'s Standard S30100 SUS301 301 1.4310 S30400 SUS304 304 1.4301 S30403 - 304L 1.4307 S31008 SUS310S 310S 1.4845 S31603 - 316L 1.4404 201 S32100 SUS321 321 1.4541 202 S41008 SUS410S 410S - 204Cu3 S43000 SUS430 430 1.4016 S43932 - - 1.4510 S44400 SUS444 444 1.4521 S44500 SUS430J1L - - Other specifications are also available up to request Hot Rolled Strip Available Size Width: 16.0~609.6 mm Thickness: 2.5~10.0 mm Available Steel Grade: 304, 304L, 316L Surface Finish: No.1 Cold Rolled Strip Available Size Width: 4.0~609.6 mm Thickness: 0.1~3.0 mm Available Steel Grade: 201, 202, 204 Cu3, 301, 304, 304L, 310S, 316L, 321, 409L, 410S, 420J2, 430, 439, 441, 444, 445 Surface Finish: 2B, 2D, BA, No.3, No.4, No.5, SB, HL Tolerance of Width W &lt; 100 mm 100 mm �?�?�?�¢?�?�?�?�¦ W &lt; 1000 mm �?�??�?�?�?�± 0.10 mm �?�??�?�?�?�± 0.25 mm Chemical Composition &amp; Mechanical Property : Steel Grade Ni% Max. Cr% Max. C% Max. Si% Max. SUS301 6.0~8.0 16.0~18.0 0.15 1 SUS304 8.0~10.5 18.0~20.0 0.08 1 SUS304L 9.0~13.0 18.0~20.0 0.03 1 SUS310S 19.0~22.0 24.0~26.0 0.08 1.5 SUS316L 12.0~15.0 16.0~18.0 0.03 1 SUS321 9.0~13.0 17.0~19.0 0.08 1 SUH409L 0.6 10.5~11.75 0.03 1 SUS410S 0.6 11.5~13.5 0.08 1 US420J2 0.6 12.0~14.0 0.08 1 SUS430 0.6 16.0~18.0 0.12 0.75 Mechanical Property (For Reference) Steel Grade N/mm 2 MIN. Tensile Stress N/mm 2 MIN. Proof Stress % MIN. Elongation HRB MAX. Hardness SUS301 520 205 40 95 SUS304 520 205 40 90 SUS304L 480 175 40 90 SUS310S 520 205 40 90 SUS316L 480 175 40 90 SUS321 520 205 40 90 SUH409L 360 175 25 80 SUS410S 410 205 20 88 SUS420J2 540 225 18 99 SUS430 420 205 22 88

Standard Technique Surface finish Grade Thickness Width*Length JIS Aisi ASTM DIN EN bs Hot rolled No.1 201, 202, 301, 304, 304J1, 304L, 321, 316, 316L, 309S, 310S, 317L, 409L, 410, 410S, 420J1, 420J2, 430, 444, 441, 436, 439, 904L, 2520, 2205, 2507 etc 4.0mm-16mm,17-150mm 1250*3000mm(4.1*10ft) 1500*3000mm(5*10ft) 1250*6000mm(4.1*19.6ft) 1500*6000mm(5*19.6ft) 1800*6000mm(5.9*19.6ft) 2000*6000mm(6.5*19.6ft) Cold rolled 2B 201, 202, 301, 304, 304J1, 304L, 321, 316, 316L, 309S, 310S, 317L, 409L, 410, 410S, 420J1, 420J2, 430, 444, 441, 436, 439, 904L, 2520, 2205, 2507 etc 0.2mm-3.0mm 1000*2000mm(3.2*6.5ft) 1219*2438mm(4*8ft) 1500*3000mm(5*10ft) 1800 available 2000 available No.4 Hairline 8K BA Hot rolled or cold rolled embossed similar to the above info. colored Customized We can customize surface treatment, grade, thickness, width, length etc according to customer\'s requirements. Send us inquiry to get cost-effective price and details within 1 hour. Chemical Composition Mechanical Character Grade C Si Mn P S Ni Cr Mo Cu N Hardness 201 0.15 1 5.50-7.50 0.045 0.03 3.50-5.50 16.00-18. 00 ? 0.05-0.25 HB 241, HRB 100, HV240 304 0.08 1 2 0.045 0.03 8.00-11.00 18.00-20. 00 HB 187, HRB 90, HV 200 310s 0.08 1.5 2 0.045 0.03 19.00-22. 00 24.00-26. 00 HB 187, HRB 90, HV 200 316L 0.03 1 2 0.045 0.03 10.00-14. 00 16.00-18. 00 2.00-3.00 HB 187, HRB 90, HV 200 321 0.08 1 2 0.045 0.03 9.00-12.00 17.00-19. 00 HB 187, HRB 90, HV 200 430 0.12 1 1 0.04 0.03 (b) 16.00-18. 00 HB 183, HRB 88, HV 200

MACE / SEMPRA Mace is the waxy outer layer that surrounds the seed of the nutmeg. The webbing around it is known as an "aril." The center of the nutmeg contains the single, hard seed. Mace is often called the sister spice of nutmeg for their relation to each other in how they grow on the nutmeg tree. In fact, nutmeg trees are the only plant to produce two spices from a single plant. Though similar in taste, mace has a flavor profile that is not quite as sweet as nutmeg and offers a sharper note of a bitter finish. Additionally, mace has more of a pepper-like finish to it, and notes of pine and coriander with citrus.

Beeswax granules are small, pellet-like pieces of beeswax that have been refined and processed for various applications. Beeswax is a natural substance secreted by honeybees to build their honeycombs. It has a wide range of uses due to its unique properties and benefits. When beeswax is collected from beehives, it can be further processed and formed into granules for easier handling and melting. Here are some common uses of beeswax granules: Candle Making: Beeswax is a popular choice for making candles because it burns cleanly and emits a pleasant, subtle honey-like aroma. Beeswax candles are often considered more eco-friendly and natural compared to paraffin wax candles. Cosmetics and Skincare: Beeswax is used in various cosmetic and skincare products, including lip balms, lotions, creams, and salves. It adds a natural emollient and helps to create a protective barrier on the skin. Woodworking: Beeswax can be used to coat and protect wooden surfaces. It provides a natural finish and enhances the wood's appearance while also offering some level of protection. Leather Conditioning: Beeswax can be used to condition and waterproof leather items like shoes, belts, and bags. It helps to keep the leather soft, supple, and resistant to moisture. Soap Making: Beeswax is sometimes added to homemade soap recipes to improve the soap's texture, hardness, and overall quality. Food Preservation: While not as common as other uses, beeswax can be used to coat cheese or to seal the tops of homemade jams and jellies to help extend their shelf life. Art and Crafts: Beeswax granules can be used in art projects, such as encaustic painting, where pigments are mixed with melted beeswax to create unique textures and effects. Haircare Products: Beeswax is used in some haircare products, like styling pomades and waxes, to provide hold and shine to hair. Lubricant and Polish: Beeswax can be used as a natural lubricant for items like zippers and wooden drawers. It can also be used to polish furniture and metal surfaces. When using beeswax granules, they are typically melted down before being incorporated into various products. This can be done using a double boiler or a microwave, being careful not to overheat the wax to avoid degradation. It's important to note that some people may be allergic to bee products, so it's a good idea to perform a patch test before using products containing beeswax on the skin. Additionally, when purchasing beeswax granules, opt for high-quality, pure beeswax to ensure the best results in your applications.

Virgin coconut oil is made from fresh coconut meat. The production embraces the removal of the bark, the elimination of the brown shell and washing. Then the white meat gets grounded (to obtain fine flakes) and dried. After drying the white meat goes true a screw press to extract the oil. The oil gets filtered afterwards to result in a clear oil. Ingredients Organic cold pressed coconut oil. COCONUT OIL, 100% natural, is a refined vegetable oil extracted from the dried coconut flesh of Cocos Nucifera (Coconut). COCONUT OIL is one of the vegetable oils that accumulate high levels of saturated fatty acids in the triacylglycerol fraction. COCONUT OIL contains approximately 50% of Lauric acid (saturated C12 chain). COCONUT OIL provides emollient properties and is great for moisturizing, that make it useful to be used in all cosmetic formulations. COCONUT OIL is specially indicated for lipstick, make up and soap makers. The saturated nature of COCONUT OIL provides resistance to rancidity and makes a very hard soap while at the same time producing a fluffy lather. Many cultures use coconut oil straight on their hair and skin for conditioning. PHYSICAL & CHEMICAL STANDARDS Colour 25mm cell on the lovibond colour Scale in Y+5R , not deeper than (0.9 Y+0.1R) Relative Density at 30 0C 0.920 Relative Index at 40 0C ND Moisture %( matter volatile at 105 0 C,max) 0.1 Insoluble Impurities % by mass,max < 0.02 Free fatty Acids,calculated as lauric acid % bymass,max 0.04 Iodine Value 6.4 Saponification Value >255 Unsaponifiable Matter % by mass,max