Polarization Beam Splitter is designed to divide one beam of any polarization into the two beams of the polarization vertical to each. The optical route is from one fiber to two fiber. Company introduction: a manufacturer and supplier of Optical Passive Components with ISO9001:2015 certified. We design advanced and cost-effective passive components for various industries which include Fiber Laser, Sensing Applications, CATV, Telecommunication, Medical Systems, Gyroscope, etc. Our main products include High Power Components up to 100W (20kW), Polarization Maintaining (PM) and Single-mode Fiber Components with ranging from 780nm to 2000nm. We also provide Customized components to our customers. High power Optical Fiber Components: -Optical Fiber Isolator, up to 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In Line Polarizer/Depolarizer; -In Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patch cord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
The PBC/PBS is built based on PM collimator and Wollaston prism, with All-glass technique sealed.Process. lt can combine two polarization state into one single mode fiber or split single mode into.Two vertical polarization states.Mostly used in Raman Amplifier,combine two vertical polar states.To get a double power light
Domestic wire, house wire, submersible cables (flat / round), single core flexible cable, multi core flexible cable, xlpe insulated pvc sheathed power cable, xlpe insulated armoured control cable, pvc insulated armoured control cable, xlpe insulated unarmoured control cable, pvc insulated unarmoured control cable, optical fiber cable, optical fiber armoured cable, ftth drop cable, instrumentation cable, shielded cable. networking cable, cat 6 cable, cat 6 utp cable, cat 6 stp cable, cat 6 sftp cable, cat 6 ftp cable fire alarm cable, fire survival cable, data cable, electric cable, coaxial cable, cctv cable, travelling cable, lift cable, lift traveling cable.
"substrate: h-zf3 Dimensions: 25.4 x 25.4 x 25.4cm Surface quality: 60/40 Surface flatness: lambda/10 Beam deviation:
Low voltage power cables, mid voltage power cables, control cables, instrumentation and telecommunication cables, optical fiber cables, mine low voltage power cables, mine mid voltage power cables, rail transit communication cables, railway rolling stock cables, cables for use in photovoltaic systems, fireproof cable, low voltage power cables for shipboard and offshore, mid voltage cables for shipboard and offshore, control cables for shipboard and offshore, instrumentation and telecommunication cables for shipboard and offshore compensating extension cables and compensating cables, rubber sheathed cable, charging post cable, connecting cables for equipment, towline cables, high temperature resistant cable,esp power cable, (electrical submersible pump power cable), mining detection cable, logging cable, submarine power cable.
"substrate: h-k9l Dimensions: 25.4 x 25.4 x 25.4mm Surface quality: 60/40 Surface flatness: lambda/10 Beam deviation:
Soybean, soybean meals, wheat, barley, ginger, rice, wheat bran, optical fiber cable.
Sustainable/eco-friendly products: cork yoga mats, yoga blocks, yoga wheels coconut coir bamboo sunglasses bamboo tumblers bamboo straws bamboo toothbrushes bamboo with zinc alloy safety razors bamboo pens bees wax wraps sustainable packaging.
Submarine communications and telecommunication.
SM 1510nm PLC 1*16 Fiber Optical Splitter Micro Type SM 1510nm PLC 1*16 Fiber Optical Splitter Micro TypeDescription: A fiber-optic splitter, also known as a beam splitter, is based on a quartz substrate of an integrated waveguide optical power distribution device, similar to a coaxial cable transmission system. SM 1510nm PLC 1*16 Fiber Optical Splitter Micro Type Product Feature: 1. Low insertion loss 2. High return loss 3. Telcordia GR-1209 and GR-1221 compliance 4. YD/T 2000.1-2009 compliance SM 1510nm PLC 1*16 Fiber Optical Splitter Micro Type Application: 1. FTTx, FTTH,FTTF,FTTB, 2. PON networks, BPON, EPON, GPON 3. CATV, CCTV 4. Data communication SM 1510nm PLC 1*16 Fiber Optical Splitter Micro Type Product Specification: Line Width: 20mm Wavelength: 650nm Optical Path: Inner Optical System Operation Material: Solid State Incentive mode: Light pump type Opticombine was founded in 2011, owned by SI CHUAN GUANGFA TECHNOLOGY CO., LTD. Opticombine is a manufacturer and full-line distributor of communication fiber opticï¼?connectors, fiber optic consumable products, active & passive network equipment and components. It serves customers from all segments of the fiber optics industry including telecommunications, contractors, resellers/distributors, researchers, government, education, cable TV operations, and telephone R&D facilities. We're committed to delivering an exceptional customer experience by consistently applying the principles of trust, partnership, expertise, and a proven reputation knowing that our employees are the key to our success.CC:
1).Planar lightwave circuit (PLC) splitter is a type of optical power management device that is fabricated using silica optical waveguide technology.2).It features small size, high reliability, wide operating wavelength range and good channel-to-channel uniformity, and is widely used in PON networks to realize optical signal power splitting.3).We provides whole series of 1xN and 2xN splitter products that are tailored for specific applications.4).All products meet GR-1209-CORE and GR-1221-CORE requirements.Parameters121418116132164Operating Wavelength (nm)1260~1650Fiber TypeSMF-28e or customer specifiedInsertion Loss (dB)(S/P Grade)4.0/3.87.3/7.010.5/10.213.7/13.516.9/16.521.0/20.5Loss Uniformity (dB)0.40.60.81.21.52.5Return Loss (dB) (S/P Grade)50/5550/5550/5550/5550/5550/55Polarization Dependent Loss(dB)0.20.20.30.30.30.4Directivity (dB)555555555555Wavelength Dependent Loss(dB)0.30.30.30.50.50.5Temperature Stability(-40~85 °C)(dB)0.50.50.50.50.50.5Operating Temperature (°C)-40~85Storage Temperature (°C)-40~85Packaging Dimension (mm) (LWH)4044404440444044507460124Notes:1.Specified without connectors. 2.Add an additional 0.2dB loss per connector
Lan cable, optic fiber cable,power cable,other chemical.
ES fiber is a sheath-core composite fiber obtained by successfully combining low-melting components and high-melting components on a single fiber. It has excellent thermal bonding properties. The low melting point component in ES fiber melts under heat treatment conditions higher than its melting point, and bond with other materials to form a binder-free environmentally and friendly non-woven fabric. ES fiber has various advantages such as soft, fluffy, low-temperature processing, heat-bonding, plasticity, non-toxic, non-irritating, and lightweight. It is mainly used to manufacture high-quality sanitary products such as sanitary napkins and diapers. And it is also high-quality materials used to make medical products such as medical protective cloth and medical protective masks, and so on. There are two main types of ES fibers. The first kind is a composite of PE and PP. Its sheath layer is PE (polyethylene, melting point 130�°C), and its core layer is PP (polypropylene, melting point 165�°C). The second kind is a composite of PE and PE. Its sheath layer is PE, and the core layer is PET (polyester, melting point 255â??), which is an upgraded version of PE/PP. ES is divided into EP and ET in terms of material and functionally divided into the hydrophilic, water-repellent, hydrophilic, and weak parent, single parent, multi-parent.In addition, it also can be divided into whitening, general whitening, high holding, medium holding, and low holding. The specifications are 1.5D38mm, 2D38mm, 4D51mm, and so on. In the future, the trend will gradually develop towards fine deniers. SPECIFICATION: PE+PET ES Fiber: Optical White & Super Hydrophile 2D*38mm, Optical White & Hydrophile 2D*38mmï¼? Optical White & Water Repellency 2D*38mmï¼? RAW White & Water Repellency 2D*38mmï¼? Optical White & Super Hydrophile 1.5D*38mmï¼? Optical White & Water Repellency 1.5D*38mmï¼? RAW White & Water Repellency 1.5D*38mï¼? Hydrophile 2D*38mmï¼? Water Repellency 2D*38mm PE+PP ES Fiber: Hydrophile (P2Q) 2D*38mm
Kaolin: Kaolin uses are multiple and diverse. Kaolin are used as functional filler, extender, ceramic raw material and pigment because of its whiteness and fine particle size. Kaolin also hold importance as raw material in refractory applications, concrete, rubber and fiber glass manufacturing. We, as a Kaolin Exporter welcome any size of international orders from Middle East and other countries. Applications: Paper: Kaolin used as a coating pigment and as a filler to replace fiber. It possesses desirable optical properties. Concrete: Kaolin helps to improve strength and durability of concrete. When added to concrete mix, reacts with free lime released during cement hydration to produce additional cementitious material, resulting in an improved high performance concrete. Plastics : Kaolin is widely used as filler in the plastics industry because of its inert chemical nature and its unique size, shape and structure. Agriculture : It is used as a carrier and diluent in fertilizers, pesticides and related products. It is suitable as carrier because it aides the retention of the formulations on the plant. Rubber : It is commonly used as functional filler in rubber applications. While Kaolin improves overall performance for Rubber in general, different types of white pigment play specific roles in rubber application. Paint : Kaolin used as an extender in paints. It reduces the amount of expensive pigment such as Titanium Dioxide. It assists with desirable rheological properties that help maintain proper dispersion and provide bulk to the product. Ceramic : Kaolin improves whiteness and brightness of ceramic body. Good plasticity, good shrinkage, low water absorption and casting rate are also very important properties of kaolin.
Selling optical fiber Performance indexes : Insertion loss0.1db Return loss Interchangeability Repeatability0.1db Plugging times Operating wavelength Operating temperature Storage temperature Features: Standards of iec, bell core Upc end-face finishing High return loss and low insertion loss High reliability and stability Applications: Fiber optic communication system Fiber optic catv Fiber optic test and measurement equipment Fiber optic backbone International standard packing
Fiber optic Description 1.Special two-layer tube technology for good flexibility and bend-resistant property. 2.Water-blocking compound filled up and all cross section double water-blocking. 3.Non-metal structure good electromegnectism resistant property, suitable for electric field and some areas where thunders usually happen. 4.Aramid yarn ensures the tensile strength performance. 5.Excellent water-proof layer, good moisture resistance. Application 1, suitable for both indoor and outdoor 2, long distance communication system 3, local area network system 4, subsiber network system Negotiate
Optical fibre
Product Characteristic >Material selection of high quality cold-rolled steel sheet, electrostatic spray surface, stylish, sturdy, easy to use >Inside the cable fixtures, splice and clamps >Fully enclosed, protecting >Suitable for outdoor armored, indoor soft cable >Standard cell size, 19 inches in width, can be mounted both distribution frame cabinet/rack can also be used with equipment rack >Structure the use of thicker passivation of galvanized cold rolled steel plate or surface coating technology, adapter works with the original Japan import ceramics core, guarantees excellent mechanical and optical properties >Combines the advantages of the optical fiber distribution box, also available as cable terminal box; can be individually assembled into optical fiber distribution frame, also available with digital distribution units, audio accessories, bunding in a cabinet/rack which constitute an integrated distribution frame >Flexibe configuration, installation and simple to use, easy to maintain, easy to manage, it is essential for line fiber/jumper fiber/splice fibr/optical fiber of the small and medium size communication room. Â communication engine room, jumping fiber, cable and splice one access the essential equipment Technical parameters >Several coupled interfaces >Compact Optical is used for fiber splice, optical adjustment, cable protection and so on >The height 1U is suitable for Cabinet or rack >Conform to ISO/IEC11801 standards -