Fiber Optic Media Converter Suppliers and Manufacturers

Fiber optic media converter 10M/100M media converters and 1000M media converters Products capability: According with the protocals: IEEE 802.3 IEEE 802.3u Fast Ethernet and IEEE802.3ab Support long data packet Easily for setting and debugging Technology specification: Wavelength:1310nm and 1550nm LAN port speed:10M/100M and 1000M Transimission distance:20km 40km 60km 80km 120km

Stand alone Managed 10/100/1000Base-Tx to 10/100/1000Base-Fx Media Converter SUN Telecoms stand alone Ethernet Media Converter is offers a cost-effective product to transmit distances up to 120km (Single-mode fiber). It makes it easy to incorporate the advantages of fiber-based connection technology in a managed Ethernet/Fast Ethernet network. Integrated Auto Cross-over MDI/MDI-X and NWay capabilities make it simple to deploy within a network. Also, the í¦hot-swappableí¦ design is ideal for scaling the system up or down quickly. Features: Web, SNMP, Console management Hot-swappable module Available with ST, SC, or WDM Simplex SC single-fiber connectors Auto MDI/MDI-X on copper port Auto-negotiation on copper port LED status for Link/Activity, LFS, 100, Loopback, and Full Duplex/Collision Link-Fault Signaling illuminates to indicate link failure Link-Fault Signaling function can boot up redundant link if network is installed with primary and redundant link Local and remote loopback

Technical parameter 1.Standards:ieee802.3u fast ethernet 10/100base-tx and 100base-fx 2.Connectors:(rj45-utp and fiber sc) 3.Led:power.Fdx/col, fx-link/act, txlink/act, fx100.Tx100 4.Data tranfer mode: 10/100mbps 5.Duplex mode :full or half duplex mode 6.Power requirement:ac 100-260v dc1a +5v 7.Ambient temperature:0 - 70degree 8.Humidity:5% - 90%(noncondensing) 9.Dimenstons:26*71*97mm 10.Cable:cat.5 utp cable 11.Fiber: multi-mode Specification Connector type: sc Typical distance: 60km Fiber type: singlemode Wavelength: 1310nm Min tx pwr: -5.0dbm Max tx pwr: -1.0dbm Sensitivity: -35.0dbm Link budget: 29.0dbm

Features Complies with 802.3u 10/100base-tx and 100base-fx standard Provide one fiber connector and one utp connector Auto-detection of half/full duplex transfer mode for tx port Auto-negotiation of 10/100mbpa rate and auto-mdix for tx port Provide switch configuration of half/full duplex transfer mode for fx port Led indicators provides status to easily monitor network activity External or internal power supply Compact size Can be used in 2u rack Parameters : Standards: ieee802.3 , ieee802.3u , ieee802.3x Data rate : 10/100mbps Operating wavelength: multi mode: 850nm, 1300nm, 1310nm & Single mode: 1310nm, 1550nm Transmit distance: multi-mode: 2km5km & single mode: 20-120km Fiber interface: sc, st and fc are available Fiber type: multi-mode: 50/125um, 62.5/125um single mode: 9/125 um Rj45 port utp cable -100ohm up to 100m Power supply: input-220vac, -48vdc Power consumption:5w Operation temperature: 0~70 Storage temperature: -40~85 Humidity: 5%~95%(non-condensing). Kington packing.

The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber. It can extend the transmission distance to several kilometer or hundred kilometer.Using media converter is an economical solution to achieve long distance transmission base on current status. Technical parameters: 1. Standard Protocol: IEEE802.3 10 Base-T standard IEEE 802.3u 100Base-TX/FX standard IEEE 802.3z 1000Base-TX/FX standard 2.Connector:oneUTPRJ-45connector,oneSC/STconnector 3. Operation mode: full duplex mode or half duplex mode 4. Power supply parameter: outside: 5V DC 2A; built-in: 110-265V AC 48VDC 5. Environmental temperature: -40C~+85C. 6. Relative humidity: 5%-90% 7. TP cable: Cat5 UTP cable 8. Transfer fiber: multi-mode: 50/125, 62.5/125 or 100/140m single mode:: 8.3/125, 8.7/125, 9/125 or 10/125m.

Fiber Optic media converter can transform the transmission media of Ethernet signal from CAT5 to optical fiber. It can extend the transmission distance to several kilometers or hundred kilometers. Using media converter is a economical solution to achieve long distance transmission base on current status. SC,FC,ST fiber ports available. Expand aple poly ephylene, carton.

Features: -Broadcast filtering, address auto learning and auto-update feature and th operating mechanism of store and forward. -Cache size: 256KB, address table size: 4KB -Ethernet 10Base-T or 100Base-TX or 1000Base-T to 1000Base-LX fiber optic media converters -Support IEEE 802.3, IEEE 802.3U, IEEE 802.3X, IEEE 802.3z/AB, IEEE802.1d -Supports full-duplex or half-duplex backpressure flow control flow control, and with Auto-Negotiation function -Interface supports 1000Mbps, 100Mbps, 10Mbps, can use with notthe same rate. -TX/RX dual-header Standard SC interface -Electronical interface supports 10Mbps, 100Mbps, 1000Mbps -Automatically adapt , optical interface work rate 1000Mbps port -Integration of high-quality photovoltaic modules to provide good optical properties and electrical properties to ensure reliable data transmission -Status LEDs on link/connection status, dynamic data transfer/ full duplex / half duplex/rate status. -Provides one RJ-45 interface supports auto-electrical cross connect switches, hubs -Power Consumption: 4.5 W (Power adapter input AC-85V~ 265V) -Over 50,000 hours consistent working period. Transmission fiber: Multi-mode: 50/125, 62.5/125 or 100/140166;204;m Single-mode: 8.3/125, 8.7/125, 9 / 125 or 10/125166;204;m Operating temperature :0-50 161;227; C Storage temperature: -40-70 161;227; C Humidity: 5% -90% non condensing.

â?¢ 1 Port 10/100M Media Converter, Single Mode Dual Fiber â?¢ Half or full duplex auto-negotiation â?¢ 10/100 Mbps auto-negotiation for copper port â?¢ Auto MDI/MDI-X for copper port â?¢ Complies with IEEE 802.3u, IEEE 802.3X, IEEE 802.3 â?¢ Support Link Fault Pass Through function â?¢ Plug-and-play installation â?¢ Extend network distance up to 100 km â?¢ SC/FC/ST fiber port optional, WDM â?¢ Can be build in 2U 14 slot media converter chassis

ForTronix 10G Managed Fiber Optical Media Converter Open SFP+ Slot converts and extends a 10G connection over fiber optical cables. And it extends the network transmission distance from 100m via copper cables to 100 km via fiber optical cable. Moreover, this Fiber to Ethernet converter has a durable all-steel chassis and offers simple plug-and-play installation. At the meantime, it supports for full-duplex operation, and its Jumbo Frame support provides efficient network operation. In addition, this versatile 10G Managed Fiber Optical Media Converter Open SFP+ Slot is compatible with most 3COMâ?¢, Ciscoâ?¢, Lucentâ?¢ and Nortelâ?¢ networks and fully complies with applicable IEEE 802.3 standards. Furthermore, its design widely applied to home, office and private sectors applications.

APT-103M22CC Optical media module 1.According with ieee802.3 ieee802.3u ieee802.3x Ieee802.1q 100base-tx 100base-tx 100base-fx standard. 2.Afford tcp/ip, pppoe, dhcp, icmp, nat protocol. 3.Flow control:full-duplex adopt ieee802.3x, half-duplex adopt backpressure standard. 4.Electric port support auto-negotiation function, autoconditioning transmit mode and transmit speed. 5.Port supply auto-mdi/mdix automatic reverse. 6.Support storage transmit mode. 7.Support electric port's 10m 100m mode and self-adapt mode to switch. 8.Afford the state indicator, external power(output 5v~50hz 1a) 9.Interface:electric port:rj-45 fiber port:sc 10.Twisted-pair:cat5 cat6 11.Multimode fiber: 50/125, 62.5/125um 12.Working temperature:0~50 degree 13.Storage temperature:-20~70 degree 14.Humidity:5%~90%(noncondensing) Connect type: sc Fiber type: multimode Wavelength: 1300nm Typical distance: 2km Min tx pwr: -19.0dbm Max tx pwr:-14.0dbm Sensitivity:-31.0dbm Link budget:12.0dbm

Technical parameter 1.Standards:ieee802.3u fast ethernet 10/100base-tx and 100base-fx 2.Connectors:(rj45-utp and fiber sc) 3.Led:power.Fdx/col, fx-link/act, txlink/act, fx100, tx100 4.Data tranfer mode: 10/100mbps 5.Duplex mode :full or half duplex mode 6.Power requirement:ac 100-260v dc1a +5v 7.Ambient temperature:0 - 70degree 8.Humidity:5% - 90%(noncondensing) 9.Dimenstons:26*71*97mm 10.Cable:cat.5 utp cable 11.Fiber: multi-mode Specification Connector type: sc Typical distance: 2km Fiber type: multi-mode Wavelength: 1300nm Min tx pwr: -19.0dbm Max tx pwr: -14.0dbm Sensitivity: 31.0dbm Link budget: 12.0dbm

Product name: 10/100m fiber media converter Dual fiber Product intro: The fiber media converter transform the transmission media of ethernet signal from cat5 to optical fiber. It can extend the transmission distance to several kilometer or hundred kilometer.Using media converter is a economical solution to achieve long distance transmission base on current status.The media converter transform the transmission media of ethernet signal from cat5 to optical fiber. It can extend the transmission distance to several kilometer or hundred kilometer.Using media converter is a economical solution to achieve long distance transmission base on current status. Main features: Support ieee802.3u 10/100base-tx/fx ieee802.3x protocol. With the function of automatic recovery to prevent system halt. Indicate the working status. Avoiding the interference of electromagnetic wave, radio frequency and terrestrial current. Optional inside and outside power supply. No adjust electrical and optical environment. Led indicator light shows the working performance status. Duplex mode: Fiber media converter supports full duplex and semi duplex modes, 10/100mbps automatic protocol. Inserting to 14 slots rack with play and plug. Led status indicator light makes easy diagnosing network and checking troubleshooting. Good flow control and reset fuction prevent system halt. Transmission distance: Mm(multi mode): within 2 km Sm(single mode):20km, 40km, 60km, 80km, .100km Environment parameters: Working temperature: 0íµí½65íµ Storage temperature: -40íµí½+85íµ Humidity: 5%í½90% Other parameters: Inside power supply dimesion: 160mm*110mm*30mm Outside power supply dimesion: 110mm*70mm*30mm Rated voltage: ac220v/50hz Inside power supply: ac 220v/1a Inside power supply: dc 5v/1a

Media Converter is one technical product that was used to change the optic signal to electric signal,which help us solve the problem how transmitt the signals through a long distance,as the development of the information age,media converter become more and more popular, They are available between the fiber lines and cable lines.And they have obtained a big market in, telecommunications, broadcasting, railways, military, finacial, securities, customs civilaviation, shipping, local area network ,CATV Features 1.Support EEE802.3protocol,IEEE802.3u,100Base-TX,100Base-FX,IEEE802.3Z,1000Base-t Ethernet Standard 2.Support full-duplex and half-duplex transmission mode 3.Provide one or moer switching twisted pair ports of 10Mbps/100Mbps self_adaptive or 1000Mbps, 10Mbps/100Mbps/1000Mbps self adaptive and one 155Mbps or 1.25Gbps fiber interface. 4.Support up to 1552 byte long packet transmission 5.Supply the optical fiber transmission of dual-fiber multi-fiber,dual-fiber signel_mode and single-fiber single-mode. 6.External and internal power can be choosed 7.media converter with external power supply can match with 2U-14 slots rack and card-inserted type media converters can match with 2U-16 slots rack 8. Comprehensive LED 9. Port support Auto-MDI/MDIX automatic reverse Technical parameters 1.Transmission rate:10/100Mbsp,1000Mbsp, 10/100/1000Mbsp 2.Working wavelengh:850/1310/1550nm 3. Ethernet port:1/2/4port,Connect STP/UTPCat5 4. Fiber Connect:SC/FC/ST/SFP 5. Transmission Distance: 5.1 Dual-fiber and Multi-mode:2KM 5.2 Single-Fiber and Single-Mode:20/40/60/80KM 6.3Dual-Fiber and Single-mode:20/40/60/80/120KM 7.Power Input:AC110/220V,DC-48V,DC24V,DC12V,DC5V 8.Working Temperature: 10 ~ 50 9.Storage temperature: -40 ~ 70 10.Environmental humidity: 5% -90% 11.power consumption: 2.5W/8W Applications 1. apply to ready to rise to 10M extended enterprise network bandwidth 1000M 2. apply to images, voice and other multimedia data on an integrated transport network 3. point applies to the computer signal transmission in need of the occasion 4. widely used for computer data transmission network to meet a variety of business needs 5. apply to the campus broadband network, broadcasting network and intelligent residential broadband fiber-to-floor fiber to the home data transfer 6. with the switches and other computer network equipment can be combined to form:-chain, star, ring-type network and other computer networks 20-5000/ 0.67KG 27*16*6(CM)

1000M Dual Fiber FC External Power Fiber Optic Media Converter We supply various fiber optic media converters with competitive price. Features 1. Origin: China, factory price, three years warranty 2. Full duplex flow control, half duplex back pressure 3. Auto-negotiation of 10/100/1000 Mbps rate and Auto-MDI/MDIX for TX port 4. Auto-detection of half/full duplex transfer mode for TX port 5. Provide switch configuration of half/full duplex transfer mode for FX port 6. Transmission distance up to 2km for multimode fiber and 20-120km for single mode fiber 7. Easy-to-view LED indicators provides status to easily monitor network activity 8. Compliant with FCC, 15 CLASS A, RoHS, CE MARK and IEEE 802.3 9. Packaging: 44 boxes/carton, size 62x43x34.5cm, gross 22kg Applications 1. FTTH application 2. Gigabit Ethernet, GPON, EPON 3. Telecommunication and fiber optic data transmission networks 4. Wide Area Networks (WAN), Local Area Network (LAN), CATV Network Technical Parameters Standard Protocol 100M 1000M IEEE802.3 10 Base-T IEEE802.3 1000 Base-T IEEE802.3u 10/100Base-TX/FX IEEE802.3u 10/100/1000Base-SX/TX IEEE 802.3d IEEE802.1q, IEEE802.1p QoS, IEEE802.1d IEEE 802.3Q IEEE 802.3z, IEEE 802.3ab LED Indicators POWER, FPL, 10/100, FRX, TRX, FDX POW, FDX, TX Link / ACT, SPD, FX Link / ACT Power Supply external: DC-48V, DC24V, DC12V, DC5V external: 5V DC 2A internal: AC110-250V/50Hz, DC -32~-72V internal: AC 100-250V/50~60Hz, DC -36~-72V power consumption ¡¡¡ì15W power consumption ¡¡¡ì15W Band Width optical port: 155Mbps optical port: 1.25Gbps RJ 45 port: 10/100Mbps Operation Mode Full / half duplex mode Ports UTP RJ-45, SC/ ST/ FC/ LC fiber connector Wavelength multimode 850nm, single mode 1310/1550nm Operation Temperature 0¡ãC~50¡ãC Storage Temperature -40¡ãC~70¡ãC Humidity 5%~90% non-condensing Twisted Pair Cable Cat5 UTP cable (the max distance up to 100m) Fiber Cable 9 / 125|¡¡ì¬m single-mode cable provides long distance for 20/ 40/ 60/ 80/ 120 km 50/125, 62. 5/125|¡¡ì¬m multimode cable up to: 2km/ 5km(100M), 220m/ 550m(1000M) MTBF >50000 hours Dimension external power: 94*70*25 mm (3.7*2.8*0.98 inch) internal power: 140*110*30 mm (5.5*4.3*1.2 inch) plug-in card: 157*128*31 mm (6.2*5.1*1.2 inch) Gross Weight external power: 0.4 kg internal power: 0.8 kg plug-in card: 1.0 kg Emission/Safety FCC Part 15 , Class A, RoHS and CE Mark Export Carton Packing

Product name: 10/100m fiber media converter Single fiber Product intro: The fiber media converter transform the transmission media of ethernet signal from cat5 to optical fiber. It can extend the transmission distance to several kilometer or hundred kilometer.Using media converter is a economical solution to achieve long distance transmission base on current status.The media converter transform the transmission media of ethernet signal from cat5 to optical fiber. It can extend the transmission distance to several kilometer or hundred kilometer.Using media converter is a economical solution to achieve long distance transmission base on current status. Main features: Support ieee802.3u 10/100base-tx/fx ieee802.3x protocol. With the function of automatic recovery to prevent system halt. Indicate the working status. Avoiding the interference of electromagnetic wave, radio frequency and terrestrial current. Optional inside and outside power supply. No adjust electrical and optical environment. Led indicator light shows the working performance status. Duplex mode: Fiber media converter supports full duplex and semi duplex modes, 10/100mbps automatic protocol. Inserting to 14 slots rack with play and plug. Led status indicator light makes easy diagnosing network and checking troubleshooting. Good flow control and reset fuction prevent system halt. Transmission distance: Mm(multi mode): within 2 km Sm(single mode):20km, 40km, 60km, 80km, .100km Single fiber 1310/1550 wdm Environment parameters: Working temperature: 0íµí½65íµ Storage temperature: -40íµí½+85íµ Humidity: 5%í½90% Other parameters: Inside power supply dimesion: 160mm*110mm*30mm Outside power supply dimesion: 110mm*70mm*30mm Rated voltage: ac220v/50hz Inside power supply: ac 220v/1a Inside power supply: dc 5v/1a

Media converter Two 10/100m electrical ports, one single-mode or multi-mode optical port Multi-mode transmission distance: 2km, single-mode transmission distance: 120km, single-strand double-directions /double-strand double-directions. Set - in 1m cache, supporting 2k mac address self-learning and self-updating capability Supports forcible execution the cross of 10m, 100m, full-duplex, half-duplex, twisted-pair and automatically adapt to connect auto mdix function directly Supports rate control function and the rate can been controlled between nx64k (n=1~1600) to 100mbps Supports renovate system automatically function, support system regular refresh automatically via setting time, protect from system halted Supports management based on web, snmp, telnet or local console Supports lld(search disconnected link automatically), llr(return alarm message when disconnected link found) Supports llcf(report the disconnected alarm message to local network administration) Detect and control the operational states of electrical port and optical port of the near end and the far end via interface of management Supports open or close electrical and optical ports through via the far end network management Supports legal maximum packet size up to 1912 bytes, support cisco, isl and vtp Physical property: Input power: ac 100v~220v or dc 48v Dimension: 191mm x 110mm x 25mm Environment requirements: Operating temperature: 0¦-50¦ Storage temperature: -40¦-70¦ Environment humidity: 5-90%(non-condensing) Export carton with inner box

Support 10/100m remote manageable fx media converters, 10/100/1000m remote manageable fx media converters, 1 fx + 2 RJ45 ethernet media converter, 125m~4.25g oeo, and 10g oeo managed at the same time Cover all functions of common fiber media converters, what's more, it supports protocols like snmp, web, telnet and console They can realize the integrated management to all chassis. Media converter card supports protocols like q-in-q double tag vlan, ieee802.1q tag vlan and ieee802.3x flow control Interface for management: rs232 console port (RJ45) and 10/100mbps RJ-45 ethernet port. Supporting remote and local management. With centralized management and top tree, several chassis can be managed in the same interface at the same time; with grouping management any converter can be conveniently manipulated among many converters. Standard package

Built-in ip-based web interface. Supporting remote and local management. Store and forward mechanism, supporling ieeee 802.3x frame flow control for full-duplex mode Manual ip address setting/dhcp client for ip address assignment. Event trap and snmp trap support. Password setting, ip setting and devices description setting through planet smart discovery utility Choice of fiber-connector from sc, lc, wdm, multi-mode / single-mode fiber /1000base-sx / lx mini gbic module. Standard package per customer