Expander Interface T8311 T8311C P8311 Suppliers and Manufacturers

Description The Trusted TMR expander interface module resides in the Trusted controller chassis and provides the master interface between the inter-module bus (IMB) in the controller chassis and the expander bus. The expander bus allows multiple chassis systems to be implemented using UTP cable connections whilst maintaining the fault tolerant, high bandwidth IMB capabilities. The module provides fault containment for the expander bus, the module itself and the IMB in the controller chassis, ensuring that the effects of these potential faults are localized and system availability maximized. The module is fault tolerant with Hardware Implemented Fault Tolerant (HIFT), Triple Modular Redundant (TMR) architecture. Comprehensive diagnostics, monitoring and testing provide rapid fault identification. Hot standby and module sparing configurations are supported, allowing automatic and manual repair strategies. Communication between the expander interface and the TMR processor is via the IMB on the backplane of the controller chassis. The IMB provides fault tolerance and high bandwidth communications between the interface modules and the TMR processor. All transactions are voted, localizing faults to a Fault Containment Region (FCR) within the IMB they occur. Communication between the interface module and the TMR expander processor in the expander chassis is via the expander bus. The expander bus is triplicated, point-to-point architecture. Each channel of the expander bus comprises separate command and response media. Voting is provided at the expander bus interface to ensure that cable faults are tolerated, and the remainder of the expander processor operates in a fully triplicated mode, even in case of cable faults occurring. The TMR expander interface module derives its internal voltages from dual redundant +24V dc power supplied via the module connector from the Trusted controller chassis backplane. Each FCR derives the required supplies independently. Non-critical monitoring and module status display functions (front panel LEDs) are also provided. Features Triple Modular Redundant (TMR) fault tolerant (3-2-0) operation. Hardware Implemented Fault Tolerant (HIFT) architecture. Dedicated hardware and software test regimes which provide fast fault recognition and response times. Automatic fault handling without nuisance alarming. Hot replaceable. Front panel status LEDs.

Description The Trusted Expander Interface Adaptor Unit T8312 comprises seven 12-pin ODU connectors (dependent on type of unit), a printed circuit board (pcb), a 96-way C type connector which plugs into a double 96-way connector assembly designed to be connected to the Trusted Expander Interface modules resident in the Controller Chassis. The Unit is contained within a metal enclosure and is designed to be clipped onto the Controller Chassis rear connectors. A release button is provided to enable the Unit to be disconnected. Features Allows easy inter-connection of Controller and Expander Chassis. Unit is fully shielded for EMC. Version available for smaller Trusted Systems-up to four Expander Chassis. Locking connectors for increased reliability.

Description The Trusted Expander Interface Adaptor Unit T8312 comprises four 12-pin ODU connectors (dependent on type of unit), a printed circuit board (pcb), a 96-way C type connector which plugs into a double 96-way connector assembly designed to be connected to the Trusted Expander Interface modules resident in the Controller Chassis. The Unit is contained within a metal enclosure and is designed to be clipped onto the Controller Chassis rear connectors. A release button is provided to enable the Unit to be disconnected. Features Allows easy inter-connection of Controller and Expander Chassis. Unit is fully shielded for EMC. Version available for smaller Trusted Systems-up to four Expander Chassis. Locking connectors for increased reliability.

Product Description VGA video distributor can be not only VGA,XGA, SVGA, UXGA or multisync monitor video signal copy to 2/4/8/16 set of output devices, and can strengthen the video signal in order to extend the transmission distance up to 45m, Through the stack other distributor, can be expanded to support hundreds of monitors. Applies to strengthen and broadcast video data to the public environment, by the location of the safety monitoring work environment ,or for business or classroom education and training to provide high quality video images.    Product features: Video resolution can reach 1920*1440@60Hz,and support the DDC,DDC2,DDC2B function. Support hot plug. High video support stereo sound. Metal case design. Do not need to plus additional hardware or software. To support the operating system: Windows 7, Windows 2000, Windows XP, Mac, Sun, LINUX. Supports VGA,XGA, SVGA, UXGA WUXGA and multisync display   PRODUCT PARAMETERS: input interface 1 road input 15 HDF VGA interface Output interface 4 road 15HDF VGA interface synchronization output RGB analog channel bandwidth 250MHz Input level the vp-0.5-1p Output impedance 75Ω Line synchronous channels 0.7-5 vp - p input level Support resolution 1920*1440 Power DC 9V 50/60Hz 90W Shell metal   GHT wire & cable Co.,ltd. is a professional manufacturer which produces audio and video cables, coaxial cables, HDMI cables, speaker cables, telephone cables LAN cables, RCA cable and various connectors. Our products are mainly exported to India, America, German, Sweden, Israel and other European countries. We have a strong technical team, advanced production techniques and equipment as well as state-of-the-art testing instruments. We are able to improve existing product lines and create new series. Thus we are well equipped to complete OEM orders, designing and manufacturing products according to clients' specific requirements. Moreover, we can control the quality better and give our buyers the best price and the best service. Welcome to visit our factory in Guangzhou City - half hour way from Airport. We are looking forward to cooperating with all the customers in the world.

Trustedâ?¢, the ICS Triplex flagship product, has the smallest footprint in the industry. It uses RunSafeâ?¢ 3-3-2-0 fault-tolerant control to virtually eliminate spurious trips and offers the highest availability and lowest cost of ownership of any SIL3 rated safety system available. T8100,T8110B,T8110C,T8120,T8121,T8122,T8123,T8151B,T8151C,T8153,T8160,T8161,T8162,T8191,T8192,T8193,T8194,T8200,T8202,T8220,T8222,T8225,T8230,T8231,T8232,T8233,T8234,T8235,T8240,T8243,T8247,T8270,T8271,T8272,T8273,T8290,T8292,T8293,T8294,T8300,T8310,T8311,T8312-4,T8312-7,T8314,T8380,T8402,T8403,T8423,T8424,T8431,T8432,T8433,T8448,T8449,T8451,T8461,T8471,T8472,T8480,T8800,T8801,T8802,T8805,T8821,T8824,T8830,T8831,T8832,T8833,T8835,T8840,T8842,T8846,T8850,T8870,T8871,T8891,T8901,T8902,T8903,TC-001-02,TC-002-02,TC-003-02,TC-004-02,TC-006-02,TC-011-02,TC-201-02,TC-203-02,TC-205-02,TC-207-02,TC-209-02,TC-210-02,TC-211-02,TC-212-02,TC-221-02,TC-301-02,TC-302-02,TC-303-02,TC-304-01,TC-305-01,TC-306-02,TC-308-02,TC-311-02,TC-312-02,TC-313-02,TC-314-02,TC-320-01,TC-323-01,TC-501-02,TC-503-02,TC-504-02,TC-505-02,TC-507-02,TC-509-02,TC-510-02,TC-511-02,TC-512-02,TC-517-02,TC-601-02,TC-701-02,TC-801-02 T8100C,T8120C,T8121C,T8122C,T8123C,T8153C,T8231C,T8232C,T8240C,T8293C,T8300C,T8310C,T8311C,T8314C,T8403C,T8424C,T8431C,T8432C, T8433C,T8448C,T8449C,T8451C,T8461C,T8471C,T8480C,T8800C,T8801C, T8830C,T8831C,T8833C,T8842C,T8846C,T8850C,T8891C,T8312-4C,T8312-7C,T8131,T8173,T8444,T8834,T8841,T8295,T8296,T8297,T8201,T8226,T8086,TC322-02,TC324-02,TC325-02,TC-310-02,TC-321-01,TC-322-02,TC-324-02,TC-325-02,TC-521-02

Description The Trusted TMR expander processor module resides in the processor slots of the Trusted expander chassis and provides the slave interface between the expansion bus and the expander chassis backplane. The expander bus allows multiple chassis systems to be implemented using UTP cable connections whilst maintaining the fault tolerant, high bandwidth inter-module bus (IMB) capabilities. The module provides fault containment for the expander bus, the module itself and the expander chassis, ensuring that the effects of these potential faults are localized and system availability maximized. The module is fault tolerant with Hardware Implemented Fault Tolerant (HIFT), Triple Modular Redundant (TMR) architecture. Comprehensive diagnostics, monitoring and testing provide rapid fault identification. Hot standby and module sparing configurations are supported, allowing automatic and manual repair strategies. Communication between the expander processor and the TMR processor is via the TMR expander interface module and the triplicated expander bus. The expander bus is triplicated, point-to-point architecture. Each channel of the expander bus comprises separate command and response media. Voting is provided at the expander bus interface to ensure that cable faults are tolerated, and the remainder of the expander processor operates in a fully triplicated mode, even in case of cable faults occurring. Communication between the expander processor and the I/O modules in the expander chassis is via the IMB on the backplane of the expander chassis. The IMB is identical to that within the controller chassis, providing the same fault tolerant, high bandwidth communications between the interface modules and the TMR processor. As with the expander bus interface all transactions are voted, localizing faults to Fault Containment Region (FCR) within the IMB should occur. The TMR expander processor module derives its internal voltages from dual redundant +24V dc power supplied via the module connector from the Trusted expander chassis backplane. Each FCR derives the required supplies independently. Non-critical monitoring and module status display functions (front panel LEDs) are also provided. Features Triple Modular Redundant (TMR), fault tolerant (3-2-0) operation. Hardware Implemented Fault Tolerant (HIFT) architecture. Dedicated hardware and software test regimes which provide fast fault recognition and response times. Automatic fault handling without nuisance alarming. Hot replacement. Front panel status LEDs.

Product Features: 1. HDMI high-definition output picture quality, support H-2.64 1080P songs. 2. Double picture in picture (PIP), high-resolution vision, 3D splendid VGA the new concept of "dream& universe" motion picture song-ordering. 3. Function for previewing songs, technique of dragging-broadcasting, more precise for ordering. 4. Have the function of turning up and down the tone, letting the music moving along us. 5. Upgrading from standalone version to online version, avoiding the concern of expanding business. Specification: 1. Audio interface: A set of R, L channel 2. Video interface: One HDMI interface, two AV outputs 3. Mouse interface: One PS/2 4. Standard USB interface: One 5. RJ45 interface: Two 6. Definition of video:1280X720 7. Optical fiber output port: One 8. In-line output port: One 9. VGA output interface: One 10. Others: One IR interface, two sets of song-guiding port.

http://armdevs.Com/ipc-sama5d35.Html Working temperature: -40 to +85 celsius Atmel sama5d34 cortex-a5 cpu, 536 mhz 512 mb ddr2 sdram, 256 mb nand flash Two ethernet support Tft lcd with touchscreen, audio Can, rs485, rs232 support Cm-sama5d35 cpu board feature Cpu processor Atmel sama5d35 arm processor Cortex-a5, working at 536mhz. Ddr2 ram memory 256mb ddr2 ram, 32bit data bus Flash memory 256mb nand flash 4mb spi flash Pin interface 2 x 60 pin 2.0mm space dip connector 1 x 30 pin 2.0mm space dip connector Two ethernet and seven serial port Resource: usb, ethernet, serial, ssc audio, can, sdio, spi, iic, gpio On-board resources Integrated 1gmbit ethernet on board 2 x led Supply voltage 3.3v Pcb size 8 layer, 52 x 64 (mm) Low power consumption, only 0.5w Ipc-sama5d35 base board feature Ethernet Two ethernet port > one gbit ethernet support, rj45 interface > one 100m ethernet support, rj45 interface Serial port Total seven serial port: > debug serial: rs232 level, db9 connector > usart0: rs485 level, connector > usart1: ttl level(5-wire, expand with 2x5pin header com ) > usart2: rs232 level(expand with 3.81 connector) > usart3: ttl level(5-wire, expand with 2x5pin header com ) > uart0: ttl level(3-wire, expand with 2x5pin header com) > uart1: ttl level(3-wire, reused with the audio chips) Can bus: 1 x can bus 2.0 Standard interface Two usb host One usb device interface One audio in/out interface One tf card interface Board resource Key: 3 user key, contain one reset key and two user key One rtc battle Gpio: 16 gpio interface Pcb size: 145 x 110mm, 2 layer Power in: 12v System: linux 3.6.9 Software support U-boot Support update the system by usb disk Support update the system by ethernet Version: linux 3.6.9 Driver support Can driver: support can bus

Features: Conventional appliance that can be applied to any standard ip data transmission network platform including ethernet-on-coax (eoc) network. Prospective device that supports full hd decoding, in order to preserve original audio/video quality. Highly compatible with other pms with standard data interface. Supporting of online upgrade ensures outstanding expandability for future scale expansion and new service implementation.

1.Microcomputer control fully .Interface for operation and control easily. 2.Set up the parameters according to the products or workers in advance, shift quickly and raise efficiency. 3.Speed governing by pwm electric motors of microcomputer, improve its characteristics and achieve zero current inverting to expand its service time. 4.Pid heating controller is optimized to set the temperature fast to raise efficiency. 5.Perfect heater protection.Restart it as soon as the heater is turned off. 6.Alarm of temperature anomaly. Packing: 1 unit/wooden case Volume: 135cmx75cmx160cm Gross weight: 193kg

Features: Support major media source format in both hd and sd. Different models based on customers' requirements suits different needs. Support major cas systems in broadcasting industrial. Support major middlewares for value-added services, in order to support service expanding of data broadcasting, stock information, vod, nvod, advertising and many others. Ease of upgrade with stable upgrade policies such as online upgrade, usb upgrade and serial interface upgrade, in order to fulfill different service needs from customers. Distinguish high performance price ration with outstanding reliability. Flexibility of customization in accordances to specific customer requirement.

Cti (computer telephony integration), also called computer-telephone integration or cti, is technology that allows interactions on a telephone and a computer to be integrated or co-ordinated. As contact channels have expanded from voice to include email, web, and fax, the definition of cti has expanded to include the integration of all customer contact channels (voice, email, web, fax, etc.) with computer systems. Operator console : the gaytes phone systems software-based operator console interface has been designed to simplify common tasks of an operator attendant. The user friendly and feature rich software enables an operator to handle a high volume of calls maintaining personalized service. It allows one to screen the real time extension status, place outside calls, and conference calls to internal and external numbers. It also empowers the operator to put place calls on hold, transfer calls to extensions or directly to voicemail or even off site numbers with the touch of a button or the click of a mouse.

2.8'' High resolution TFT screen(960*240) Build-in 1.3M camera, DV and camera function NAND Flash 128Mí¬4GB; Video Playing(Mpeg4 ASF) 320*240 at 30 fps SD/MMC expandable slot (Max.4GB) Game function: support game card, NES format and download games Av out (NTSC/PAL) Multi-language interface Optional Av/in video recording (max 320*240) Optional Build-in FM Stereo output. Automatic and manual channel search, max 20 channels save Build-in flash memory up to 4GB, extend flash slot, 4GB max; Optional FM radio upgrade USB 2.0 connector" 539g/pc with box 20 pc/carton. 13.0kg/carton Gift box: 21.5x15x6cm Carton: 44x31x31.5cm

HTEDVS/R-SPC Stand-alone DVR Hengtong htedvs/r-spc embedded stand-alone digital video recorder is a mainboard with 4 channels video input, which can be assembled in the standard home pc or industrial chassis. By inserting the video card into the standard pci slots the real time video and audio input channels will be expanded up to 8/12/16/20/24, and non real time video input channels up to 32-64. Sound card. Network card, vga card, rs232, usb integrated on the mainboard with 64m memory. Video output, vga, mic, audio output and infrared remote control interfaces offered, alarm i/o, mouse operation and nas (smb/cifs) supported.

The Rigol MSO5354 is a 4-channel oscilloscope that has a bandwidth of 350 MHz. Thanks to the exceptionally high sample rate of up to 8 GSa/s and a memory of 25 Mpts/channel, signals can be analysed and processed in great detail. The MSO5354 offers the possibility to measure digital signals in combination with the PLA2216 logic analyser. Furthermore, the oscilloscope can be expanded with various bus trigger and analysis options. Besides the trigger and analysis options, it is also possible to add a power analysis option and a 2-channel function generator to the oscilloscope. Thanks to the 41 built-in waveform parameters, automatic measurements can easily be performed. The oscilloscope is equipped with a 9" capacitive touch screen, making it easy to operate. With various interfaces like LAN, USB and HDMI it is possible to connect the MSO5354 for example to a PC to transfer the measurement results, or directly to a monitor via the HDMI connection. The Web Remote Control interface allows the user to perform measurements from a distance. For this you only need to enter the oscilloscope's IP address into your browser, no software is required. All this makes the oscilloscope widely applicable for various applications.

I/O-decentralized automation always includes the replacement of discrete wirings by fieldbus or industrial Ethernet communication. Remote I/O systems are highly integrated gateways between the field device connection and their communication standard and the discrete I/O area communication standards. Low latency and a high number of I/O connections on modular devices are important criteria. Blue Jay Technology offers the Universal Remote I/O Link is a local area network designed to connect controllers to remote I/O chassis and a variety of intelligent devices such as operator interfaces and AC or DC drives. MIOS supports up to 31 slots with as many as 128 I/O points in each system. If you need more, you can expand your system with Ethernet router, easily support thousands of I/O points in a single system Features ·Support universal Input Signal ·Local area network designed for factory-floor applications ·Connects controllers to remote I/O chassis and other intelligent devices ·Real Full Isolated Remote I/O ·Built-In Web Server ·Dual Channel , Power Hot Swap Supported ·Support Multi Commucation Protocols ·Flexibly Configuration With Sorts of Full Isolated I/O models ·w/o external power supply ·Back board designed with redundant power-supply interfaces

Storage Function other parameter Receiving distance (max. ) Model of configurable sensors Overall dimension (mm) usb rs-485 Network Flash storage Background storage Alarm setting D Product features: 1. Receive data from 100 wireless temperature sensors simultaneously 2. Access software in a variety of ways to manage monitoring easily. 3. Expand mass storage to save historical data, read data through usb. 4. Have data interface to access other instruments conveniently. Remark: (standard); (optional); (null) No. Model basic parameter Communication interface Storage Function other parameter Receiving distance (max. ) Model of configurable sensors Overall dimension Flash storage Background storage Alarm setting Data display Data forwarding Alarm Power supply Frequency Display screen Machine Software 1 at-ii-x100c01 800m at-ii-c3/c6/c7/tc/tr 180*100*40 Sound and light; on-off alarm node ac: 85v~264v; dc: 110v~370v; 220v± 10%50hz 433mhz~470mhz 3lcd 3" lcd 2 at-ii-x100c02 800m at-ii-c3/c6/c7/tc/tr 200*135*31 3 at-ii-x100d01 800m at-ii-d6 180*100*40 4 at-ii-x100d02 800m at-ii-d6 200*135*31 At-ii-x256 series Product features: 1. Receive data from 256 wireless temperature sensors simultaneously. 2. Access software in a variety of ways to manage monitoring easily. 3. Expand mass storage to save historical data, read data through usb. 4. Have data interface to access other instruments conveniently. 5. Analysis functions for native data. No. Model Basic parameter Communication interface Storage Function other parameter Receiving distance (max. ) Model of configurable sensors Overall dimension (mm) usb rs-485 network Flash storage Background storage Alarm setting Data display Data forwarding Data analysis with curve Alarm Power supply Frequency Display screen Export standard packing: carton box or wooden case

Rf transceiver We manufacture various kinds of rf modules used in remote control, we do export and accept oem/odms with high quality, sincere service and competitive price. Power supply: dc 5v or 3.3v; Rf power: ¡Ü10mw; Receiving current:

Ts-remultiplexer -Support up to 6 channels of ASI-IN single/multi-program TS multiplexing (can be used in cascade) -Output code rate is continuously adjustable, actual output data rate up to 120 Mbps -Each input supports an actual data rate up to 155Mbps, packet burst supportable -Self-adaptive input TS packet length·+188 / 204·¼ output TS packet length·+188 / 204·¼can be set by the user -Besides two-channel ASI and one-channel SPI, output interface also provides software-switched DS3 / E3 module·+optional·¼ -input MPTS analysis and realtime code rate statistics -high-precision PCR, average PCR jitter between 20 ~ 60 ns -PID filtering/PID re-defining for the convenient adding/deleting programs and modifying PID -Rich LCD panel functions allow realtime monitoring on system status and parameter setting -RS232·+RS485 interface and Ethernet interface·+optional·¼, via which PC remote control on the MUX can be achieved. -Parameter storage function: automatically withdraw parameters to initiate multiplexing -Fault isolation function: in case certain channel of input TS turns abnormal, theref+s no influence on the multiplexing of other input TS. -Super-low time delay: time delay between input and output is usually within 1 ms. -High bandwidth availability: when input TS code rate is fixed, bandwidth availability reaches over 99%. -Self-adaptive code rate: when input TS code rate changes·+VBR·¼·+MUX is able to maintain a fixed overall output code rate. -PSI automatic-generation: easily expand to EPG, SI services via Ethernet Interface.