Ev Air Cooled 6 6Kw On Board Charger Suppliers and Manufacturers

1.We use imported base paper from Germany. For solid color, base paper most 80 to 120GSM. For wood base paper is between 70-85 gsm 2. High quality water-base ink- Available over 200 shades in Solid colors and wood grains 3. With clear texture ,high Fidelity meeting international standards. 4. With smooth surface coating 5. Germproof, mould proof, antistatic and wear-resistance. 6. Green environmental protection and Odorlessness which Conforms to the GB18584-2001 standard requirement 7. Can be used for the hot press molding craft, the production efficiency is high. 8. Melamine paper takes shape easily, is widely used for the panel furniture and the decorative yarn. Product Specification: Width: 1230-1260mm or 1300-1800mm Length: 500-1000m For storing: Put it in room to a cool and dry place keep the temperature 20-25°C in room. The best humidity is: 50-60% We can also give you complete decorative solution with Matching Melamine Edge Banding, PU Paper. If you need just need Melamine/prelaminated boards either in MDF / Particle board we can also do so

Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)

Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details

The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.

Juniperus communis Fam: Cupressaceae Juniper is widely distributed throughout the northern hemisphere and its birthplace is obscure. It is found in Europe, North Africa, North America and northern Asia. The main commercial producers are Hungary and southern Europe, especially Italy. The berries were known to Greek, Roman and early Arab physicians as a medicinal fruit and are mentioned in the Bible. In the Renaissance, they were recommended against snake bite, and plague and pestilence. Because of its air-cleansing piney fragrance, the foliage was used as a strewing herb to freshen stale air and the Swiss burned the berries with heating fuel in winter to sanitize stale air. Gin, the alcoholic drink that gets its unique flavour from juniper berries, is named from an adaptation of the Dutch word for juniper, "geneva". Spice Description Initially hard and pale green, juniper berries ripen to blue-black, become fleshy and contain three sticky, hard, brown seeds. When dried, the berries remain soft but if broken open one will find the pith surrounding the seeds is easily crumbled. Bouquet: Fragrant and flowery, combining the aromas of gin and turpentine. Flavour:Aromatic, bittersweet and piny. Hotness Scale: 1 Preparation and Storage Juniper berries are at their best when they are still moist and soft to the touch, squashing fairly easily between one's fingers. It is possible to make a purée from juniper berries or to extract the flavour and aroma by macerating them in hot water, but as all parts are edible and the texture is agreeable, it is usually just as well to use the entire fruit, split or crushed. The berries are quite powerful, one heaped teaspoon of crushed fruits serving for a dish for four people. Store in a cool place in an airtight container. Culinary Uses Juniper berries perform a quite unique role, by contributing as much to the character of food through their 'freshening' ability, as they do by way of their specific taste profile. As well as flavouring a dish, juniper cuts the gaminess of game, reduces the fatty effect of duck and pork and perks up a bread stuffing. The strong hearty flavour of juniper goes well with strong meats, such as game. Pork chops, roast leg of lamb, veal, rabbit, venison and wild boar are all enlivened with a hint of juniper. Juniper berries blend well with other herbs and spices, especially thyme, sage, oregano, marjoram, bay leaves, allspice and onions and garlic. One application I am particularly fond of is in a simple chicken casserole, It can effectively be added to wine marinades for meats, and is used with coriander in smoking meat. It seasons pâtés and sauces and in Sweden. Goulash and Sauerkraut often feature a juniper taste, as do some home-pickled meats like salt beef, salt pork and ham. Generally juniper can well be used in any dish requiring alcohol. Fruit dishes, such as apple tart and pickled peaches, also harmonize with this flavour.

The manufacture of both granulated and powdered garlic is the same, except for the grinding or powdering process. Granulated garlic is coarse while garlic powder is ground extra fine. Whole cloves of garlic are peeled, cleaned and then sent into a machine that slices and chops them into smaller sections. The sections are dried in slow ovens for three to four hours. When the garlic has cooled it is ground to the desired consistency, be it granulated or powdered. The finished products are put through sifters to separate any debris or undesirable pieces. Both are packaged in air-tight containers and stored in a cool, dry place. Granulated and powdered garlic are used to season and enhance the flavor of many foods. Often it is an appropriate substitute when fresh garlic is called for in a recipe. Powdered garlic dissolves almost instantly when incorporated into any dish, hot or cold. Granulated garlic takes a few minutes to become incorporated and release its flavor. We can offer Garlic Granules in 0.5mm to 1.0mm, 40/60 mesh, 26/40 mesh - 20 FCL: 10 Mt (Flakes/Cloves), 14-15 Mt (Minced/Granules/Powder) - 40 FCL H/C: 20 Mt (Flakes/Cloves), 25-30 Mt (Minced/Granules/Powder) Product Packing - 12.5/13/14 Kg Paper Bag inside 1 Poly Bag - 20/25 Kg Cartoon inside 1/2 Poly Bag - 20/25 Kg Cartoon inside 1/2 Aluminium Foil Bag Our range includes: - Dehydrated Garlic Flakes/Cloves (5-10mm) - Dehydrated Garlic Minced (1-3mm, 3-5mm) - Dehydrated Garlic Granules (G1, G2, G3) - Dehydrated Garlic Powder (80-100 mesh) -

Product Name: Sodium permanganate Use level: Industrial Content: 40 (%) CAS Number: 10101-50-5 Molecular formula:NaMnO4 Molecular Weight: 141.93 Appearance: purple liquid. A density of 1.36 ~ 1.39 g / cm3, soluble in water, ethanol and ether, soluble in liquid ammonia. Decomposition in alkali. Strong oxidizing. And chemical properties similar to potassium permanganate. Purposes: as oxidants, disinfectants, fungicides and phosphorous antidotes. Toluene is also used to manufacture saccharin, o-toluene sulfonamide and organic synthesis and purification of phenol wastewater treatment. Can be used for circuit boards, metal surface cleaning, the conductive film cleaning to remove grease, electrolytic manganese dioxide, chemical fiber finishing, electroplating addition to hydrogen sulfide and other odors, as well as water treatment and so on. Packaging and storage: Industrial Pails barrel, net weight 25kg plastic drum, 250kg steel-plastic composite barrels, 1250kg IBC barrels packaging. Store in a cool dry place. Quality Standard:   Items index Sodium permanganate (NaMnO4) Content / (%) 40 Water-insoluble content / (%) 0.01 Potassium (K) content / (%) 0.22 pH value 6 ?8 Density / (g/cm3) 1.36 1.39 Chloride (Cl) content / (%) 0.02

Dettol Anti Bacterial Body Wash Available in : 1. Dettol 100 ml Bottle : Ori, FRS, SNS, SKC, Cool 2. Dettol 100 ml Refill : Ori, Skc 3. Dettol 250 ml Pouch: Rad, ORI, FRS, SNS, SKC, ENE, COOL, Deep Clean 4. Dettol 300 ml Bottle : Rad, ORI, FRS, SNS, SKC, ENE, COOL, Deep Clean 5. Dettol 450 ml Pouch: Rad, ORI, FRS, SNS, SKC, ENE, COOL, Deep Clean 6. Dettol 625 ml Pump : Ori, FRS, SNS, Cool 7. Dettol Pouch 600 ml : Cool, Lasting Shipping from Semarang, Indonesia

Product of Procter & Gamble Indonesia Products ranges from Ambi Pur Spray to Ambi Pur Car. Ambi Pur Spray: Sweet Citrus & Zest, Blossom & Breeze, Lavender Vanilla, Spring & Renewal, Linen & Sky, Downy Ambi Pur Car: Sky Breeze, Lavender, Thai Dragon, Vanilla, Tobacco, Pacific Air, Fresh & Cool, Pink, Aqua, Lavender Spa, Clip Fresh.

Zinc Shampoo Anti-Dandruff Available Variants: Clean&Active, Re-Freshing Cool, Anti Hair Loss, Soft Shine, Revitalizing, Black Shine, Men Active, Men Anti Hair Fall Available Packaging: 1. Sachet = 480 pcs/ carton 2. Bottle 100 ml = 24 bottle/ carton 3. Bottle 150 ml = 24 bottle/ carton 4. Bottle 180 ml = 24 bottle/ carton 5. Bottle 300 ml = 12 bottle/ carton 6. Bottle 340 ml = 12 bottle/ carton Shipping from Semarang, Indonesia Product of Indonesia

1. Product Functions and Features Sodium Selenite is a supplement of selenite for animal nutrition. The product has stable quality and good liquidity and is easy to mix process. 2.  Introduction Mixed feed additives and sodium selenite. The additive of microelement selenite in feed. Usage & Dosage:The recommended amount in the compound feed(calculated by Selenite mg/kg)0.1-0.3mg for livestock,0.1-0.3mg for fishes. 3. Appearance Light Grey Powder 4. Product quality standard 1%selenite 5%  selenite Sodium selenite (counted by Se)% 1 ±0.05 5 ±0.10 Moisture % 5 Pass 450 m test sieve% 95 Total arsenic content (counted by As)% 0.0005 Lead content (counted by Pb)% 0.002 Cadmium content (counted by Cd)% 0.001 5.Packing:25kg/bag 6. Storage conditions, methods and precautions: stored in cool and dry places, and used up as soon as possible once unpacked.

Model Number: Portable Air Conditioner ((WT-F26 gray) Power Type: DC Use: Room Condition: New After-sales Service Provided: None Warranty:1 year Type: PORTABLE Certification:CB, ce Cooling/Heating:Cooling Only Application:Car, Commercial, Garage, Hotel, Household, Outdoor, RV Power Source:Electric, usb Remote Control: Yes App-Controlled: Yes

TTT procedure: EN590 10pm price $460/MT, Jet fuel A1 price $76/BBL (1) FREE ON-BOARD TRANSACTION PROCEDURE - (TANK TO TANK). Rotterdam, Houston, Fujairah, Jurong, Ningbo-Zhoushan 1. Buyer issues an official ICPO with the seller's procedure, passport copy, banking details along with their Tank Storage Agreement "TSA". 2. Seller issues their Commercial Invoice "CI" to the buyer, Buyer signs and returns the commercial invoice to the seller along with an Acceptance Letter of the sales and purchase procedure. 3. Seller verifies the buyerâ??s storage facility and their Tank Storage Agreement (TSA) with the port authority. (NB: Seller will issue a Tank-to-Tank Injection Agreement (TTIA) to be signed by all parties only if buyerâ??s TSA is engaged, not active or cannot be verified with the local port authority). 4. Seller issues all POP documents below to the buyer upon a successful verification and approval of the buyer TSA or after receiving the TTIA fully signed by all parties: a. Injection Report. b. Product Passport. c. 24 Hours SGS Report. d. Product Certificate of Origin. e. Tank Storage Receipt (TSR). f. Authorization to sell and collect. g. Unconditional Dip-Test Authorization. h. Product Title Holder Transfer Agreement. i. NCNDA/IMFPA. 5. If required buyer may inspect by SGS (Dip Test In Tanks) at buyerâ??s expense. 6. Upon successful verification of POP or Dip Test in the sellerâ??s tank, buyer provides Tank Storage Receipt (TSR) to seller in order to issue the scheduled Injection Programming (IP) to be signed by buyer storage facility and then injects the product into buyerâ??s tanks. 7. Buyer makes the payment for the product via MT103, seller transfers the Title Holder & Ownership of the product to the Buyer. 8. After successful Trial Lift (First Lift), Seller issues SPA/Contract for 12 months with R&E to Buyer for processing. 9. Seller pays commissions to all intermediaries involved, for the initial lift and all subsequent lifts according to the signed NCNDA/IMFPA.

Shubhlaxmi Industries have adapted the best methods in the manufacturing blended red chilli powder. The packet of goodness reaches not only India but across the world. India own harvesting product; Red Chilli powder is packed keeping its purity and richness intact. Red Chilli powder is commonly known as "lal mirch powder" and it is one of the key ingredients in the preparation of Indian cuisines. It is one of the main members of spice catalogue because Indians dishes are said to be incomplete without the flavor of Red chilli powder. The authentic Indian cuisines are incomplete without the touch of Red Chilli Powder in them. When you have one of the finest handpicked and selected whole chillies that are grounded with traditional methods and modern techniques, it will just come as one of the most aromatic, pungent smelling and really HOT blended Red Chilli Powder. Red Chilli powder is a dominating amongst many Indian spices. If the food is tempered with red chillies powder, its aroma can spread far off. It gives an appealing red color to delicacies with mouthwatering flavor and irresistible aroma. Specification Dried Red Chili Powder variety Hs Code : 09042211 Type sannam S4 s17 Teja byadgi kashmiri Color In Asta 35 (min) 75 (min) 90 (min) 60-90 Taste mild hot mild mild - Hot Shu Level 15000 Shu 75000 Shu 8000 Shu 10000 Max Moisture 6-8% 6-8% 6-8% 6-8% Mesh Size 20-60mm 20-60mm 20-60mm 20-60mm Total Ash 9.5% Max 9.5% Max 9.5% Max 9.5% Max Para Red, Rhodamin B, Butter Yellow absent absent absent absent Orange 2, Orange B & G absent absent absent absent Sudan 1,2,3,4 absent absent absent absent Aflatoxin Range ; 5-30 Ppb 5-30 Ppb 5-30 Ppb 5-30 Ppb Quality Assurance ; Sgs, Geo-chem, Spice Board Loading Capacity : 18mt In 20'fcl & 26mt In 40'fcl Packing : 10/25/50 Kg. New Multi Wall Paper Bag

Desiccated coconut We Have Quality Desiccated Coconut Powder The processes of desiccated coconut are as below: Removal of coconut husk, Removal of coconut shell, Removal of thick brown coconut skin, Washing of white coconut meat to remove foreign material, Blanching of white coconut meat to reduce the number of micro organism to the safe level fit for human consumption within its shelf life, Cutting of white coconut meat into the desired size ( will be medium and fine size levels ) Hot air blow drying the grated white coconut meat to reduce the moisture content from 19% to less than 3%, Cooling of desiccated coconut, Sieving of desiccated coconut to separate desiccated coconut as according to the desired size, Finally, packing of desiccated coconut. End Of Use :- Fillers inside Chocolate Bars Ingredients in biscuits, Toffees, and Chocolates Cake Decorations Baking Industry Snacks Frozen Food Industry, Ice Cream Specification: Moisture: 3% max FFA : 0.5% max Fat content: 60% min SO2 : 100ppm max Ecoli & Samonella: negative. Natural white, free from foreign matter. Flavour: Mild, fresh and sweet characteristic of coconut with no off-flavour and odour Contact us for More Inquiry

Desiccated coconut We Have Quality Desiccated Coconut Powder The processes of desiccated coconut are as below: Removal of coconut husk, Removal of coconut shell, Removal of thick brown coconut skin, Washing of white coconut meat to remove foreign material, Blanching of white coconut meat to reduce the number of micro organism to the safe level fit for human consumption within its shelf life, Cutting of white coconut meat into the desired size ( will be medium and fine size levels ) Hot air blow drying the grated white coconut meat to reduce the moisture content from 19% to less than 3%, Cooling of desiccated coconut, Sieving of desiccated coconut to separate desiccated coconut as according to the desired size, Finally, packing of desiccated coconut. End Of Use Fillers inside Chocolate Bars Ingredients in biscuits, Toffees, and Chocolates Cake Decorations Baking Industry Snacks Frozen Food Industry, Ice Cream Specification: Moisture: 3% max FFA : 0.3% max Fat content: 62% min SO2 : 100ppm max Ecoli & Samonella: negative. Natural white, free from foreign matter. Flavour: Mild, fresh and sweet characteristic of coconut with no off-flavour and odour

Desiccated coconut We Have Quality Desiccated Coconut Powder The processes of desiccated coconut are as below: Removal of coconut husk, Removal of coconut shell, Removal of thick brown coconut skin, Washing of white coconut meat to remove foreign material, Blanching of white coconut meat to reduce the number of micro organism to the safe level fit for human consumption within its shelf life, Cutting of white coconut meat into the desired size ( will be medium and fine size levels ) Hot air blow drying the grated white coconut meat to reduce the moisture content from 19% to less than 3%, Cooling of desiccated coconut, Sieving of desiccated coconut to separate desiccated coconut as according to the desired size, Finally, packing of desiccated coconut. End Of Use :- Fillers inside Chocolate Bars Ingredients in biscuits, Toffees, and Chocolates Cake Decorations Baking Industry Snacks Frozen Food Industry, Ice Cream Specification: Moisture : 3% max FFA : 0.3% max Fat content : 62% min SO2 : 100ppm max Ecoli & Samonella : negative. Natural white, free from foreign matter. Flavour: Mild, fresh and sweet characteristic of coconut with no off-flavour and odour

Desiccated coconut We Have Quality Desiccated Coconut Powder The processes of desiccated coconut are as below: Removal of coconut husk, Removal of coconut shell, Removal of thick brown coconut skin, Washing of white coconut meat to remove foreign material, Blanching of white coconut meat to reduce the number of a microorganism to the safe level fit for human consumption within its shelf life, Cutting of white coconut meat into the desired size ( will be medium and fine size levels ) Hot air blow drying the grated white coconut meat to reduce the moisture content from 19% to less than 3%, Cooling of desiccated coconut, Sieving of desiccated coconut to separate desiccated coconut as according to the desired size, Finally, the packing of desiccated coconut. End Of Use:- Fillers inside Chocolate Bars Ingredients in biscuits, Toffees, and Chocolates Cake Decorations Baking Industry Snacks Frozen Food Industry, Ice Cream Specification: Moisture: 5% max FFA : 0.3% max Fat content: 62% min for high fat and 30 % +/- 5 % for low fat SO2: 100ppm max E-coli & Salmonella: negative. Natural white, free from foreign matter. Flavour: Mild, fresh and sweet characteristic of coconut with no off-flavour and odour Contact us for More Inquiry

Desiccated coconut We Have Quality Desiccated Coconut Powder The processes of desiccated coconut are as below: Removal of coconut husk, Removal of coconut shell, Removal of thick brown coconut skin, Washing of white coconut meat to remove foreign material, Blanching of white coconut meat to reduce the number of microorganism to the safe level fit for human consumption within its shelf life, Cutting of white coconut meat into the desired size ( will be medium and fine size levels ) Hot air blow drying the grated white coconut meat to reduce the moisture content from 19% to less than 3%, Cooling of desiccated coconut, Sieving of desiccated coconut to separate desiccated coconut as according to the desired size, Finally, the packing of desiccated coconut. End Of Use:- Fillers inside Chocolate Bars Ingredients in biscuits, Toffees, and Chocolates Cake Decorations Baking Industry Snacks Frozen Food Industry, Ice Cream Specification: Moisture: 3% max FFA : 0.3% max Fat content: 62% min for high fat and 30 % +/- 5 % for low fat SO2: 100ppm max E-coli & Salmonella: negative. Natural white, free from foreign matter. Flavor: Mild, fresh and sweet characteristic of coconut with no off-flavor and odor Contact us for More Inquiry