Processing: Sheet metal cutting and stamping; Material range: Aluminum, stainless steel, copper, etc; Common surface treatments: Bead blasting, anodizing, powder coating, etc. Lead time:3-7 time.
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.
U clips , J clips , brackets , hinges , clamps
Origin: Japan Material: PMMA Sheets off cuts Mix colors Category:PMMA Type: Sheets off cuts Color: Mixed colors Quantity: 22 Tons Loading weight: 22 Tons Specification: "PMMA sheets off cuts come from handicraft processing companies, can be granulated. DEC load has been promised to current customers. The earliest load will be export will be in January, 2025 Subject to unsold"
We supply high grade face veneer or core veneer. Wood species available: eucalyptus, acacia, poplar, keruing, okume, birch, pine etc. Our core veneer can be used for commercial grade plywood, film faced plywood, packing plywood. 1.Rotary cut : 1,270 x 640 x 1.0MM, OR 1.7mm 2.Sliced cut: 1270x Width 60mm upward , 0.45mm upwards 3.Thickness Tolerance: -0.03, + 0.05 4.Content Moisture: 18 % max 5.Drying process; Sundry or oven dry. 6.Cutting Process: Rotary Cutting/ Sliced cutting Grade A: 1. Full sheet of same color, no dead knot and small hole. No tear, No Joints 2. Whole piece (no joints) with live knots, limited dead knots, some small holes not more than 2cm in diameter. Also available in mix of grade A and B We can supply in following grade 1Grade A: 100% 2Grade A :90%+ Grade B:10% 3Grade B: 100%
Raw Material : PP or BOPP Raw Material : Virgin material or recycled Color : All kinds of colors or as the customers requirement Printing : One side or both sides in multi-colors with film or non film Width : From 260-1300mm Length : As the customer’s requirement Weave : 10x10,11x11,12x12,14x14 or be customized Denier : 450D to 1500D Weights/m : 50g to 200g Surface Dealing : Anti-slip or plain Top : Heat cut or hemmed Bottom : Single folded, double folded, single stitch, double stitch Liner : coated or with liner bag for moisture proof Usage : rice, flour, sugar, salt, animal feed, asbestos, fertilizer, sand, cement and so on. Packing : 500pcs(bale),1000pcs(bale) or can be customized Minimum Order 20 feet container Delivery Time : 10-30days after place an order or negotiation Trade Term : CIF, CNF, FOB QINGDAO Special Requirements : As the customers requirements Treat : UV treated or as the customers requirement Loading qty. : 12 Tons/20’container, 23tons/40’hq. We can make all kinds of size
Raw Material: PP or BOPP Raw Material: Virgin material or recycled Color: All kinds of colors or as the customers' requirement Printing: One side or both sides in multi-colors with film or non film Width: From 260-1300mm Length: As the customer’s requirement Weave: 10x10,11x11,12x12,14x14,12×11or be customized Denier: 450D to 1500D Weights/m²: 50g to 200g Surface Dealing: Anti-slip or plain Top: Heat cut or hemmed Bottom: Single folded, double folded, single stitch, double stitch Liner: coated or with liner bag for moisture proof Usage: rice, flour, sugar, salt, animal feed, asbestos, fertilizer, sand, cement and so on. Packing: 500pcs(bale),1000pcs(bale) or can be customized Minimum Order20 feet container Delivery Time: 10-30days after place an order or negotiation Trade Term: CIF,CNF,FOB QINGDAO Special Requirements: As the customers' requirements Treat: UV treated or as the customers' requirement Loading qty.:12tons/20’container, 23tons/40’hq. we can make all kinds of size
We supply attractive variety qualitative range of Toilet and Bathroom accessories. Features of our Shower door hinges · CNC machined precision pivot pins · Dimension 90mmx 55mm (varies from hinge to hinge) · Chrome plated, Brushed Nickel, Brass Polished, Polished Chrome, Gold Plated, Oil Rubbed Bronze. · Solid brass, Zinc as per customer choice. · Glass to Glass, wall to Glass shower door hinges. · Closing angles 90°, 135°,180°degree. · Straight edges, beveled edges, round edges. · Glass preparation- Mickey Mouse ear, square and round glass cut. · Glass thickness 8mm-12mm. · Glass door weight 35~36Kgs with two hinges. · Glass door weight 54Kgs with three hinges. · Also available in some models of shower door hinges with adjustable hinges. · Also available in auto- self closing for some models. · Also available in Bi-fold Hinge.
Product name: custom sheet metal fabrication Place of Origin: Qing Dao, China Brand: WY TECHNICAL Model Number: custom sheet metal fabrication Process: Laser cutting/ stamping, CNC bending, welding, surface treatment, etc Material: aluminum alloy, mild steel, stainless steel, brass, copper Surface treatment: anodization, polishing, brushing, electro-plating, powder coating, etc Inspection Tool: measuring tape, caliper, R gauge, X-ray, Salt spray machine, etc Application: Auto, machinery, equipment, medical, electrical, electronic, etc Tolerance: + - 0.1mm Equipment: Laser cutter, CNC bending machine, stamping machine, welding machine Service: sheet metal fabrication Keyword: custom sheet metal fabrication
Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details
All type clothes, urea, all type agriculture and food items, all personal and entertainment items, all industrial and automotive items, all construction household and furnishing, all computers electronics and electrical, handicraft, items, npk, fertilizers t shirt, blanket,dry fruits, animal feeds, towel, bedsheets, toys, all grocery, copper wire scrap, copper ore concentrate, zinc ore concentrate, lead concentrate, fly ash, a4 paper, a3 paper, craft paper, occ, ldpe, hdpe , pvc resin, petroleum products, jp54, jet a1, crude oil, blco , biodiesel, diesel, fuel, coal, d2, petcock, pulses, mustard oil, spices , sanitizer, gloves, medical products, cement, core sand, old ships lng, lpg, all groceries items, food products, hms1 and hms2, fish, chicken feet, chicken paws, agri & food processing agriculture products, fertilizers, seeds, farm products grains, fruits, vegetables, river sands, aggregates, pvc electrical wire, rice, charcoal, wheat flour.Export, import, merchant export import
Description Metal stamping of thick or heavy gauge material is not a problem for DongJie Industries. We have presses with higher tonnage capabilities to ensure accuracy, and we offer competitive pricing on all of our metal stamping services. Stamping is an economical way to form metal components with a variety of characteristics including strength, durability, and wear resistance. Stamped parts will also have good conductive properties and stability. At DongJie Stamping, we offer high quality, precision metal stamping for parts and components in many industries. We believe that our levels of engineering, metal stamped part production and overall performance is an art form. Through the decades wee taken advantage of promising technology and applied it uniquely to our advanced systems of getting things done right the first time. DongJie Stamping w orks with a complete range of materials to satisfy even the most demanding specifications. We service a wide range of industries with a complete array of materials from stainless to plastics. Our equipment is capable of handling a wide variety of thicknesses and finishes. We offer complete tractability and documentation when needed. Our ISO 9001:2008 certification gives our customers peace of mind that they are getting the best materials possible for their project. From selecting the best material to tooling for your metal stamping project, we know how to listen and how to hook up our engineering muscle with our customers� needs. We�ve learned how to provide a level of satisfaction that breeds dependability, confidence and value that makes our customers feel powerful. We have the expertise to ensure that your part will be manufactured to your exact specifications and to the highest quality standards. That's power satisfaction. And we manufacture that into every metal stamped part we make. Price Price Condition : FOBPrice : USD5 / piece Packaging & Delivery Delivery Lead Time : 15 daysMinimum Order : 10 pieces
PC sheets cut off Natural Transparent color  B/L description: Plastic PC, HS code 391500
Metal cutting, Stamping, bending, surface treatment. Bubble bags, carton boxes.
Product Description Custom Precision Sheet Metal Process Precision sheet metal manufacturing is one of the most necessary types of modern industrial manufacturing. Huicong hardware's team of professional craftsmen is well versed in various precision sheet metal manufacturing processes and we are proud to meet your project specifications and provide high quality custom precision sheet metal products. Huicong hardware is a professional custom precision sheet metal manufacturer and supplier in China, mainly engaged in custom precision sheet metal manufacturing, focusing on providing customers with one-stop solutions from a new design to mass production of custom precision sheet metal manufacturing services. Huicong hardware is a professional custom precision sheet metal manufacturer and supplier in China. The best OEM precision sheet metal service with superior quality.
Material: PC coated PMMA Sheet off cuts Transparent color Category: PC coated PMMA Type: Sheet off cuts Grade/Color: Transparent color Quantity: 63 Tons Loading weight: 22 Tons Spec: PC coated PMMA all clear color base, with one or both sides PE film protected. Subject to unsold
Material: PC coated PMMA Sheet off cuts Transparent color Category: PC coated PMMA Type: Sheet off cuts Grade/Color: Transparent color Quantity: 63 Tons Loading weight: 22 Tons Spec: PC coated PMMA all clear color base, with one or both sides PE film protected. Subject to unsold
Material: PC coated PMMA Sheet off cuts Transparent color Category: PC coated PMMA Type: Sheet off cuts Grade/Color: Transparent color Quantity: 63 Tons Loading weight: 22 Tons Spec: PC coated PMMA all clear color base, with one or both sides PE film protected. Subject to unsold
MATERIAL : PS Lump Mix Color (From EPS Sheet Cut Loss) CATEGORY :PS TYPE :Lump GRADE :Mix Color SPECIFICATION :"Origin in Japan, from EPS Sheet Cut Loss it is lump which generates when PS sheets are processed into repro pellets. Packing : In Fle-Con Bag Shipment : Prompt" ORIGIN : Japan LOADING WEIGHT : 21Tons FOB (USD/Ton) : $650-850
Steam coal, copper ore, iron ore, zinc ore, manganese ore in india, africa and morocco. we can supply copper ore 500mt to 3000 mt monthly basis, iron ore 25000mt to 50000mt, zinc ore 5000mt to 50000mt monthly basis. we are specialized in engineering valves, all types of metal pipes, fittings, fasteners, tubes, sheets, buttweld pipes and fittings and forge products. our mining of stone like indian limestone, manganese ore. we are associated with leading manufacturers of icumsa 45, 100, 160 etc. in brazil we supply in bulk vessel quantities moq is 12500 mt..
