NEW AND ORIGIN ITEM IN STOCK WITH ONE YEAR WARRANTY Hope anyone enquire from us, 1. lower your support costs 2, Provide on-going availability of automation replacement parts Quantity available: 1 Warranty: 12 months. Lead time: 1-2 working days. Terms of payment:T/T and Western Union. Courier partners: DHL, UPS, TNT, FedEx and EMS. Technical specification, manuals and data sheets
KEY FEATURES AND BENEFITS â?¢ From the Vibro-Meter product line VM600 CPUM/IOCN rack controller and communications interface card pair with support for Modbus RTU/TCP and PROFINET, and a front-panel display One-Shot configuration management of protection cards (MPC4 and AMC8) in a VM600 rack using an Ethernet or RS-232 serial connection to a computer running the VM600 MPSx softwar Front-panel display for visualisation of monitored outputs and alarm limits from protection cards Front-panel alarm reset (AR) button VM600 MPS rack (CPUM) security Industry standard fieldbus communications interfaces: Modbus RTU/TCP and PROFINET Two Ethernet connections and up to three serial connections (RS-232 / RS-422 / RS-485) can run simultaneously
NEW AND ORIGIN ITEM IN STOCK WITH ONE YEAR WARRANTY Hope anyone enquire from us, 1. lower your support costs 2, Provide on-going availability of automation replacement parts Quantity available: 1 Warranty: 12 months. Lead time: 1-2 working days. Terms of payment:T/T and Western Union. Courier partners: DHL, UPS, TNT, FedEx and EMS. Technical specification, manuals and data sheets
Smart card Siemens Series: SLE4442: 256byte encryption card, can read data, write data, protect data and write password SLE4428: 1024byte encryption card, can read data, write data, protect data and do password operation ATMEL Series: AT24C01A: 1K bit non-encryption card, just can read and write AT24C02: 2K bit non-encryption card, just can read and write AT24C16: 16K bit non-encryption card, just can read and write AT24C64: 64K bit non-encryption card, just can read and write AT88SC102: 1K bit logical encryption card AT88SC1604: 16K bit logical encryption card AT88SC1608: 16Kbit or 2K bytes ISSI Series: ISSI88SC1604: 16Kbit logical encryption card ISSI24C16: 2048 byte non-encryption card,just can read and write ISSI4428: 8Kbit CPU card chip, its capacity is 8k bit EEPROM, with protection function and encoding security digital approval function. It can be used in all kinds of IC card (compatible SLE4428) ISSI24C01: 128 byte non-encryption card, just can read and write ISSI24C64: 819 byte non-encryption card, just can read and write 200 pcs per inner box 5,000 pcs per outer carton 27.5kg per outer carton
CZGD8--smart card reader-writer Technology standard Weight: 300 g .Size: 123 mm x 95 mm x 27 mm Color: according to client's requirments Working temperature: -20 -- +60 Using life: 100, 000 times Operation system: windows 98, me, 2k, xp, 2003, linux, unix. Situation indication Led light to indicate power and communication situation. Communication protocol Supporting iso 1443 type a/b supporting t=0, t=1 cpu card Communication speed with contact ic card can be 115, 200 bps Supported standard and card ISO 1443 type a/b contact less card such as mifare s50, mifare s70, mf1icl10, mifare pro, mifare desfire, mifare ultralight, sle44r31, sle6-6cl, at88rf020. Iso 7816, pc/sc, gsm11.11, FCC, CE. Czgd8--smart card reader-writer Technology standard Weight: 300 g .Size: 123 mm x 95 mm x 27 mm Color: according to client's requirments Working temperature: -20 -- +60 Using life: 100, 000 times Operation system: windows 98, me, 2k, xp, 2003, linux, unix. Situation indication Led light to indicate power and communication situation. Communication protocol Supporting iso 1443 type a/b supporting t=0, t=1 cpu card Communication speed with contact ic card can be 115, 200 bps Supported standard and card Iso 1443 type a/b contact less card such as mifare s50, mifare s70, mf1icl10, mifare pro, mifare desfire, mifare ultralight, sle44r31, sle6-6cl, at88rf020. Iso 7816, pc/sc, gsm11.11, fcc, ce.
Bidirectional sliding mobile phone Double sim cards and stand by Bidirectional sliding Super long time of standby. Camera with 3 mega pixels 16¦9 wqvga with high definition Great voice with bass speaker Support the game of 8-bit simulators Support mp3/mp4 player Support t-flash card and the software from internet Support multi-languages Model¦jinpeng958 Double sim cards and stand by Bidirectional sliding Super long time of standby. Camera with 130 mega pixels 16¦9 wqvga with high definition Great voice with bass speaker Support the game of 8-bit simulators Support mp3/mp4 player Support t-flash card and the software from internet Support multi-languages Function: Screen 3.0inch/260k/240*320px Phone book 200 Mms/sms/ems available Game nes games Multimedia mp3/mp4/3gp/video recorder audio recorder/fm radio Alarm clock available Mode 5 modes by diy Camera 130 mega pixels Card t-flash Memory 761k/256mtfcard(max 4g) Data transfer blooth tooth/ usb line Parameter: Language¦ multi-language Band ¦ gsm850/900/1800/1900mhz Network: wap/gprs Accessories¦ two lithium battery/one battery charger/usb data line Conversation time¦ 160--200 minutes Time of standby¦ 200--260 hours Shape ¦ bisliding phone Dimention: 114*52*18mm Weight: 125g Battery¦ 3800 Color¦ black/champagne/silver
Bluetooth Pick-up head product series Features Easy usb plug and play; infrared light; Image sensor:cmos , improves low light vision Snapshot button Image resolution: 640*480 Video data format support: color-24 bit color i 420 rgb Pc interface type: usb port, compliant to usb specification1.1. Digital video capture speed: 15-35 fps at cif 320*200, 5-15 fps at vga 640*480. Sensor type:color cmos image sensor size:4.86mm*3.64mm Focusing range:from 3 cm to infinity Functions:format support twain driving : wdm driving , vfw System requirements Windows 98/me/2000/xp Pentium ii 300 mhz celeron , amd athlon, cpu or above . 64m ram or abve One free usb port Cd-rom driver Sound card for sound effects, earphone. Modems and network card for internet video conferencing and videophone 200mb free hard disk space Pentium ii 300 mhz celeron , amd athlon, cpu or above .
Mouse Features Easy usb plug and play; infrared light; Image sensor:cmos , improves low light vision Snapshot button Image resolution: 640*480 Video data format support: color-24 bit color i 420 rgb Pc interface type: usb port, compliant to usb specification1.1. Digital video capture speed: 15-35 fps at cif 320*200, 5-15 fps at vga 640*480. Sensor type:color cmos image sensor size:4.86mm*3.64mm Focusing range:from 3 cm to infinity Functions:format support twain driving : wdm driving , vfw System requirements Windows 98/me/2000/xp Pentium ii 300 mhz celeron , amd athlon, cpu or above . 64m ram or abve One free usb port Cd-rom driver Sound card for sound effects, earphone. Modems and network card for internet video conferencing and videophone 200mb free hard disk space Pentium ii 300 mhz celeron , amd athlon, cpu or above .
Smartlink 2800 pci modem card Features: Chipset: smartlink 2800 56k internal fax modem Data modulation rate: V. 34bis, v. 34+, itu-t v. 34 V. 32bis, v. 32, v. 22bis, v. 22 and bell 212a Itu-t v. 23, v. 21 and bell 103 Transmission: 56, 000, 33, 600, 31, 200, 28, 800, 24, 000, 14, 400, 12, 000, 9, 600, 7, 200, 4800, 1, 200, 1, 200/75 and 300bps Voice mode: remote / local record and play back voice Computer interface: pci bus and plug-and-play Data compression: itu-t v. 42bis and mnp 5 Compatibility: pentium 200 (over) with mmx, cpu with pci bus Auto-dialing: touch-tone and pulse dialing, auto dial and auto answer Fully compliant with v. 90, v. 34 bis, v. 32, v. 32 and v. 22 bis specifications Software upgradeable Supports modem wake-up on ring from d3 cold Packing: 100pcs/ctn Carton dimensions: 700 x 450 x 190mm N.W: 6kg G.W: 8kg
ST907 NEW industrial tablet PC is manufactured by Shandong Senter Electronic Co., Ltd., which adopts quad core 1.2 GHz CPU and Android 4.4 operation system; LCD screen is readable under sunlight; can configure barcode scanning, RFID reader, fingerprint identification as well as other information acquisition module; has super long battery life; IP67 high reliable three-proof structure; drop resistance from 1.2m; ST907 NEW rugged tablet PC is an internet information terminal which has advanced technology, powerful function and reliable performance. ST907 NEW adopts the combination of host and modular jacket design concept. It not only has intelligent operation platform but also has functional modular jacket with flexible configuration. So it can satisfy the customized requirements from different customers. Advanced system: Android 4.4 operating system; quad core 1.2 GHz CPU; RAM 2G -- Three-proof design: IP67 three protection grade, drop resistance from 1.2m -- Visible under strong light; 7 inch LCD screen, 1280x800 IPS capacitive touch screen -- Powerful function: multi function information acquisition configuration (1D/2D bar code scanning, LF/HF/UHF RFID reader, fingerprint identification) -- Multi communication modes: support 4G, WIFI, Bluetooth and many wireless communication modes -- Strong battery life: more than 600 hours of continuous standby -- Support professional GPS: support differential data or common GPS -- Support jacket extension: satisfy custom applications from customers General Specifications Operating System Android 4.4 OS CPU MSM8916, Cortex A53, Quad core CPU, 1.2GHz RAM RAM:2G FLASH:16G Extended Storage Micro SD, Maximum 32G USB port 5 pin MicroUSB; support OTG (U-disk/Mouse/Keyboard/USB Ethernet cable) Mini Sim Card slot Support OTG Support, through OTG can meet 100M network port, network card setup, PPPoE dial-up, web browsing. Support OTG extend RS232 serial port External port Charge port 2.5mm, headphone port 3.5mm Protection Grade Industrial Protection Grade IP67 waterproof class:7 Dust proof:6 Drop Grade Drop resistance from 1.2m Environment test Drop proof MIL-STE-810G Certificate CE/RoHS/FCC Wireless Communication Bluetooth Support 4.0 GPS Support GPS, DBS, GLONASS and professional GPS,Ublox; GPS and Beidou (alternative) WIFI Support IEEE 802.11b/g/n 4G 2G:GSM 900/1800/1900 B2/B3/B8 3G:WCDMA: 850/1900/2100 B1/B2/B5 4G:LTE_ FDD: 1800/2100/2600 B1/B3/B7 LTE_TDD :2555-2655MHz/:2300-2400MHz B41/B40 Data Acquisition (Optional) Fingerprint identification Supports fingerprint entry, image collection, fingerprint recognition, fingerprint deletion etc. Type: TCSIST Sensor type: capacitive Acquisition window size: 24.5*19mm Effective image size:15.5*18.5mm Image size: 256*360 Resolution: 500 DPI contrast mode(1:1); search mode(1:N)
Features: 1) 8ch real time monitoring 2) support two cards (16ch real time monitoring) 3) display and recording speed: A) pal: 200fps B) ntsc: 240fps 4) compression format: wavelet 5) resolution: A) pal: 768 x 576, 384 x 288, 192 x 144 B) ntsc: 640 x 480, 320 x 40, 160 x 120 Description: 1) 8 channel real time video capture card 2) pci type interface 3) 8ch real time monitoring 4) support two cards (16ch real time monitoring) 5) display and recording speed: 200 frames/pal, 240 frames/ntsc 6) compression format: wavelet 7) resolution: A) pal: 768 x 576, 384 x 288, 192 x 144 B) ntsc: 640 x 480, 320 x 40, 160 x 120 8) transmission network: pstn/isdn/lan/adsl/ddn 9) remote monitoring: ie browser and client software 10) remote modes: isdn, ddn, pstn, lan, wan, internet, adsl, modem System requirement: 1) motherboard: abit 848pe 2) graphic card: geforce 4 or ati r70000 64m or more 3) memory: 256mb or more 4) hdd: 80-120gb 5) cpu: intel's cpu 6) operation system: windows 98/2000/xp 7) windows directx8. 0 or 8.1.
System SPEC 1. High Resolution Colour CMOS Image Sensor 2. Max Resolution: 1600*1200 Max Resolution 3. Hardware Resolution: 640*480 4. GVI: RGB24/1420 GVI 5. Interface: USB1.1 6. Baud Rate: 320/240(Sif)28-30fps 640*480(VGA)18-20fps 7. S/D RATIO:
Input Type BNC: BNC X 4 Video Input(s) 1, 4, 6, 9, 10, 13, 16 Division Audio Input(s) 1 channel via sound card Recording Rate 120fps (NTSC), 100fps (PAL). Display Rate 120fps (NTSC), 100fps (PAL). Video Resolution 160x120, 320x240, 640x480, (NTSC) 192f-144?384f-288, 768f-576?(PAL) Image Compression Method Engine-K Image Compression Dimensions NTSC 160x120=Average 1Kb/Frame 320x240=Average 2.5Kb/Frame 640x480=Average 6Kb/Frame PAL 192x144=Average 1Kb/Frame 384x288=Average 2.5Kb/Frame 768x576=Average 6Kb/Frame Remote Transmission PSTN / ISDN / LAN / Leased Circuit / Internet Transmission Speed LAN : 120 Frame/Sec (MAX), PSTN : 1~5 Frame/Sec, ISDN : 3~10 Frame/Sec Image Verify WATER-MARK Surveillance Method Remote controller/Audio board IO Card Support: Yes IE Remote view: Remote view is available using web browser. Apache server is installed automatically with site software Note: Single system support 2 cards,16channels display 200 frames, System Requirements OS Supported : Windows 2000 / Windows XP/win ME CPU Celeron 433 MHz or more RAM 128MB (minimum) HDD 80GB (recommended) VGA AGP 16MB or more DirectX V 8.0 or more
*based on high image quality Philips SAA7130 chipset *MPEG4 and H.264 compression format enabled to further reduce CPU resource occupancy and HDD capacity and increase video quality. *high speed internet video broadcast. *Full internet function. *Multiple cards supported for single PC system. *Packed with color retail box. *Customer's Logo can be put on the software interface. Specifications: Camera input : 8 channel Image definition: 9-bit ADCs ( better image quality than DVR card base on FUSION 878 chip) Display speed : 240fps in NTSC, 200 fps in PAL Recording speed (max): 240fps in NTSC, 200 fps in PAL Image resolution : 640 X 480, 352 X 288, 320 X 240 Image compression : H.264 / MPEG-4( Developed by Wave-P ) Audio input : 2 channel audio input with microphone Compression ratio : 50-150M/C/H (50-150M of hard disc each channel per hour) Recording option : Motion-detection, alarm, continual modes Search and Playback: Intelligent search and 4ch playback Backup: USB / Remote backup Operating System: Windows2000 Professional / Server / XP Network protocol : TCP/IP PTZ control support: RS232-485, digital decorder Main Functions 8 channel real-time monitoring Superior image clarity ,built with 9-bit ADCs (upgraded from 8-bit ADCs) High speed network transmission Superior image clarity ,built with 9-bit ADCs (upgraded from 8-bit ADCs) Easy to install and adopts GUI (Graphical User Interface) Software included
1.CPU: Intel or Rockchips or Allwinner or MTK or Qualcomm CPU; 2.Operation System: Windows 7 or windows 10 or windows latest system, or android system; 3.Display & Touch Screnn: 8inch,10inch,12inch,to 32inch Resistive or capacitive touch screen,1024*768 or 1280*800 or 1920*1200 or 2156*1600 or others Pixels, brightness:300cd to 10000cd/m2; 4.Memory & Storage: 2G,4G,8G DDR ram + 16G, 32G,64G,128G,256G,512G,1TB is optional; 5. Wireless Network: 802.11 b/g/n or ac/b/g/n 2.4G+5G wireless and Blutooth4.0 or 4.1 or 4.2is optional; 6.I/O Ports:2*RJ45 100/1000M Ethernet ports,1*DC,3*USB2.0,1*USB3.0 Host, 1*Micro HDMI, 1*earphone jack,1*Sim card slot; Extended IO board:1*RS232+1*RJ45 Ethernet port+1*USB2.0 is optional; or customize other input and output ports. 7.3G or 4G Module: optional; 8. Optional functions: NFC 13.56Mhz, Fingerprint scanner, Barcode scanner, UHF RFID, And other functions are optional, can be customized. 9.Dimention: depends on your requirements, Weight: depends on different models Company Information: Highton Electronics Co., LTD is The TOP 5 Manufacturer of Rugged Tablet PC And industrial computer from Shenzhen city of China, where is the world-side manufacturing base of electronic products. Our factory has 100-200 workers, covering about 4000 floor square meters, have 6 assembly lines, we can assembly about 60000-100000 units per month, and our OEM factory was approved by ISO9001 certificate, strictly fulfill "7S" quality system, we are making orders for many domestic and foreign clients, Guarantee that Best Price and Good Quality.
Specification: Cpu:a13 (cpu+gpu+vpu)cortex a8 master frequency:1.5ghz Display:7 inches capacitive touch 16:9 800 * 480 tft System memory:ddr3 512mb Nand flash:4g (8g, 16g optional) Tf card: max.32g Sound system:built in speaker(2x1w) I/o ports:1 pc micro usb;1 pc tf card slot (up to 32gb);dc jack---dc5v input;earphone---3.5mm;microphone port. Keys:top:power right:vol+, vol- Network:wifi lan 802.11b/g/n; external usb 3g dongle G-sensor:all gravity induction Pc camera:0.3 mega pixels (front) Power:battery type lithium-ion 3000mah; 35 hours music for music with earphone, 8 hours above for video, hdmi output playing time above 5 hours. In/output adapter:input:ac100-240v 50-60hz;output:5v 2a O.S.:android 4.0 Browser:google chrome browser, ucweb Online entertainment:support online video, online tv, online movie, online music, online radio. Office software:word, excel, powerpoint, pdf, txt Games:3d game can be supported by internal 3d accelerate of hardware , There are more than 200 thousands kind of free software in goole market. Audio player:mp3, wma, ape, flac, wav Video player:formats support:mkv(h.264 hp), avi, rm/rmvb, mpeg-1, mpeg-2; Video output:hdmi 720p to 1080p to 2160p Color:black , white Package content:1pc of mini usb cable 1 pc of otg usb cable 1 pc of manual(english) 1 pc of charger: ac adapter ac100-240v 50-60hz 5v 2a 1 pc of earphone (optional ) Dimension(w*d*h):192 x124 x 12.8mm; Unit n.W: 0.45kg
Application areas: Measuring-level current transformer used in power system, transformer used on precision measuring instruments (such as watt-hour meter). According to the requirements of different measurement accuracy of the transformer, different soft magnetic materials can be chosen as iron core materials. The higher the permeability of the iron core is, the smaller the measurement error of the transformer is, hence the accuracy is higher. At present, the most common iron core material is cold-rolled silicon steel sheet, followed by Permalloy and nano-crystalline glass alloy. In recent years, demands for transformers with high-precision level (such as class 0.2, class 0.2Sand class0.5S) increased rapidly. When small ratio, low ampere turns are required or the iron core is restricted because of the small volume, the cold-rolled silicon steel often fails to meet the accuracy requirements. Although the Permalloy iron cores with high permeability can meet the required precision, its price is very high. However use of nano-crystalline alloy iron cores can both meet the accuracy requirements and be produced at lower cost than the Permalloy. Therefore, the demand of measuring level current transformer iron core made of nano-crystalline alloy rapidly increased domestically. The typical parameters comparison of the common soft magnetic materials used for current transformer iron cores: Basic parameters Nano-crystalline iron core Permalloy (1J85) iron core Silicon steel iron core Saturation magnetic flux density (Bs) 1.25T 0.75T 2.03T Initial permeability (¦Ì0) 8¡«12, 104 5¡«8, 104 103 Maximum permeability (¦Ìm) 60, 104 60, 104 4, 104 Curie Temperature (¡æ) 570 400 740 Density (g/cm3) 7.25 8.75 7.65 Lamination factor 0.7 0.9 0.95 Thickness (mm) 0.03 0.15 0.3 Features: It is made of the iron-based nano-crystalline strips with a moderate saturation magnetic induction, high permeability and low loss, which can effectively reduce ratio difference angle difference of the transformer. The saturation magnetic induction Bs of nano-crystalline alloy is between the silicon steel and Permalloy. The lower the Bs value is, the lower the security coefficient of the instrument is. When the system failure occurs and large current through the current transformer results therefore, the iron core is more easily filled, and the secondary current no longer increases in proportion, as can assure that the secondary instruments are well protected and not to be damaged. Permeability of nano-crystalline alloy is close to Permalloy and a magnitude higher than silicon steel, so it is suitable to be made as high-precision transformer iron core. The density and lamination coefficient of nano-crystalline is lower than that of Permalloy, under the condition of the same size and similar performance of the two. In this case the nano-crystalline iron core is 1/4 lighter in weight, and 1/3 lower in the manufacturing cost. In addition, the linear range of nano-crystalline alloy is wider than that of Permalloy .It can work for a long time at temperature of -55 ~ 130 ¡æ ,with a good temperature stability. Specifications a. Rectangular core: (mm) Iron Core Size(mm) (mm) The case size(mm) Weight of the iron Core (kg per piece) Turns Ratio N1: N2 Excitation current(mA) Excitation voltage(mV) 55*97/77*119, 25 50*92/82*114, 30 0.53 1:1 25 0.45 95 2.2 1500 53 70*90/100*120, 30 65*85/105*125, 36 0.81 1:1 200 15 1:1 500 50 75*95/105*125, 25 70*90/110*130, 30 0.7 1:1 70 2 1:1 175 8 80*95/120*135, 25 75*90/125*140, 30 1.09 1:1 80 1.7 1:1 600 41 90*90/160*160, 30 85*85/165*165, 36 2.4 1:1 100 6 1:1 500 100 1:1 1000 140 135*135/260*260, 10 130*130/265*265, 16 2.3 1:1 100 1.5 1:1 500 32 82*602/138*658, 45 75*595/145*665, 55 8.8 1:1 100 1.2 1:1 1000 45 1:1 2000 120 b. Ring core: No. The iron Core Size Case size(mm) The weight of the iron core (kg per piece) Turns ratio N1: N2 is 1:1; Input current (mA), 50Hz; Output voltage (mV) 1 1105/1165, 15 1095/1175, 25 8.35 Excitation current 450 1200 2000 Excitation voltage 0.59 2.36 5.28 2 415/520, 15 409/526, 23 6.08 Excitation current 50 250 700 Excitation voltage 0.4 3 11 3 305/490, 15 299/496, 23 9.1 Excitation current 350 900 ¡¡ Excitation voltage 5 20 ¡¡ 4 315/395, 35 309/401, 43 8.2 Excitation current 120 400 ¡¡ Excitation voltage 3 11 ¡¡ 5 198/248, 30 192/254, 37 2.76 Excitation current 100 200 500 1000 Excitation voltage 2 6 35 90 6 198/248, 20 192/254, 27 1.84 Excitation current 100 200 500 1000 Excitation voltage 1.5 3.5 25 60 7 155/200, 30 150/205, 36 2 Excitation current 100 190 1000 Excitation voltage 2.5 9.5 80 8 140/180, 30 135/185, 36 1.58 Excitation current 40 80 240 Excitation voltage 1 2.9 15 9 130/190, 30 125/195, 36 2.38 Excitation current 40 80 240 Excitation voltage 1.2 3.8 17 10 100/140, 30 95/145, 36 1.19 Excitation current 30 120 500 Excitation voltage 0.85 6.8 68 11 90/130, 30 85/135, 36 1.09 Excitation current 30 120 500 Excitation voltage 0.7 6 55 12 90/125, 25 85/130, 31 0.78 Excitation current 30 120 500 Excitation voltage 0.9 7 70 13 80/120, 30 75/125, 36 0.99 Excitation current 200 500 ¡¡ Excitation voltage 20 65 ¡¡ 14 85/115, 30 80/120, 36 0.74 Excitation current 30 120 500 Excitation voltage 0.7 6.5 55 15 85/125, 20 80/130, 26 0.7 Excitation current 30 120 500 Excitation voltage 0.62 5.5 50. wooden case+carton box.
Application areas: Measuring-level current transformer used in power system, transformer used on precision measuring instruments (such as watt-hour meter). According to the requirements of different measurement accuracy of the transformer, different soft magnetic materials can be chosen as iron core materials. The higher the permeability of the iron core is, the smaller the measurement error of the transformer is, hence the accuracy is higher. At present, the most common iron core material is cold-rolled silicon steel sheet, followed by Permalloy and nano-crystalline glass alloy. In recent years, demands for transformers with high-precision level (such as class 0.2, class 0.2Sand class0.5S) increased rapidly. When small ratio, low ampere turns are required or the iron core is restricted because of the small volume, the cold-rolled silicon steel often fails to meet the accuracy requirements. Although the Permalloy iron cores with high permeability can meet the required precision, its price is very high. However use of nano-crystalline alloy iron cores can both meet the accuracy requirements and be produced at lower cost than the Permalloy. Therefore, the demand of measuring level current transformer iron core made of nano-crystalline alloy rapidly increased domestically. The typical parameters comparison of the common soft magnetic materials used for current transformer iron cores: Basic parameters Nano-crystalline iron core Permalloy (1J85) iron core Silicon steel iron core Saturation magnetic flux density (Bs) 1.25T 0.75T 2.03T Initial permeability (¦Ì0) 8¡«12, 104 5¡«8, 104 103 Maximum permeability (¦Ìm) 60, 104 60, 104 4, 104 Curie Temperature (¡æ) 570 400 740 Density (g/cm3) 7.25 8.75 7.65 Lamination factor 0.7 0.9 0.95 Thickness (mm) 0.03 0.15 0.3 Features: It is made of the iron-based nano-crystalline strips with a moderate saturation magnetic induction, high permeability and low loss, which can effectively reduce ratio difference angle difference of the transformer. The saturation magnetic induction Bs of nano-crystalline alloy is between the silicon steel and Permalloy. The lower the Bs value is, the lower the security coefficient of the instrument is. When the system failure occurs and large current through the current transformer results therefore, the iron core is more easily filled, and the secondary current no longer increases in proportion, as can assure that the secondary instruments are well protected and not to be damaged. Permeability of nano-crystalline alloy is close to Permalloy and a magnitude higher than silicon steel, so it is suitable to be made as high-precision transformer iron core. The density and lamination coefficient of nano-crystalline is lower than that of Permalloy, under the condition of the same size and similar performance of the two. In this case the nano-crystalline iron core is 1/4 lighter in weight, and 1/3 lower in the manufacturing cost. In addition, the linear range of nano-crystalline alloy is wider than that of Permalloy .It can work for a long time at temperature of -55 ~ 130 ¡æ ,with a good temperature stability. Specifications a. Rectangular core: (mm) Iron Core Size(mm) (mm) The case size(mm) Weight of the iron Core (kg per piece) Turns Ratio N1: N2 Excitation current(mA) Excitation voltage(mV) 55*97/77*119, 25 50*92/82*114, 30 0.53 1:1 25 0.45 95 2.2 1500 53 70*90/100*120, 30 65*85/105*125, 36 0.81 1:1 200 15 1:1 500 50 75*95/105*125, 25 70*90/110*130, 30 0.7 1:1 70 2 1:1 175 8 80*95/120*135, 25 75*90/125*140, 30 1.09 1:1 80 1.7 1:1 600 41 90*90/160*160, 30 85*85/165*165, 36 2.4 1:1 100 6 1:1 500 100 1:1 1000 140 135*135/260*260, 10 130*130/265*265, 16 2.3 1:1 100 1.5 1:1 500 32 82*602/138*658, 45 75*595/145*665, 55 8.8 1:1 100 1.2 1:1 1000 45 1:1 2000 120 Note: Iron cores of other specifications can be provided upon request of users b. Ring core: No. The iron Core Size Case size(mm) The weight of the iron core (kg per piece) Turns ratio N1: N2 is 1:1; Input current (mA), 50Hz; Output voltage (mV) 1 1105/1165, 15 1095/1175, 25 8.35 Excitation current 450 1200 2000 Excitation voltage 0.59 2.36 5.28 2 415/520, 15 409/526, 23 6.08 Excitation current 50 250 700 Excitation voltage 0.4 3 11 3 305/490, 15 299/496, 23 9.1 Excitation current 350 900 ¡¡ Excitation voltage 5 20 ¡¡ 4 315/395, 35 309/401, 43 8.2 Excitation current 120 400 ¡¡ Excitation voltage 3 11 ¡¡ 5 198/248, 30 192/254, 37 2.76 Excitation current 100 200 500 1000 Excitation voltage 2 6 35 90 6 198/248, 20 192/254, 27 1.84 Excitation current 100 200 500 1000 Excitation voltage 1.5 3.5 25 60 7 155/200, 30 150/205, 36 2 Excitation current 100 190 1000 Excitation voltage 2.5 9.5 80 8 140/180, 30 135/185, 36 1.58 Excitation current 40 80 240 Excitation voltage 1 2.9 15 9 130/190, 30 125/195, 36 2.38 Excitation current 40 80 240 Excitation voltage 1.2 3.8 17 10 100/140, 30 95/145, 36 1.19 Excitation current 30 120 500 Excitation voltage 0.85 6.8 68 11 90/130, 30 85/135, 36 1.09 Excitation current 30 120 500 Excitation voltage 0.7 6 55 12 90/125, 25 85/130, 31 0.78 Excitation current 30 120 500 Excitation voltage 0.9 7 70 13 80/120, 30 75/125, 36 0.99 Excitation current 200 500 ¡¡ Excitation voltage 20 65 ¡¡ 14 85/115, 30 80/120, 36 0.74 Excitation current 30 120 500 Excitation voltage 0.7 6.5 55 15 85/125, 20 80/130, 26 0.7 Excitation current 30 120 500 Excitation voltage 0.62 5.5 50. wooden case+carton box.
[Weaving Range] This model air jet loom can weave various nature, manmade, synthetic fiber and blended spinning fiber. [Characteristic] 1. Suitable for high speed and large reed width Use strong box wall board on both sides, beating supper by using rocking shaft MID-supporter. Wide weaving range and also make the small noise and less vibration at high-speed operation. Rocking shaft is fullness steel which using min-support. This motion improves rigidity of the beating. They ensure smooth and powerful beating even at high speed. The rush start system delivers high-power torque at starting, enabling increased beating power for first pick, eliminating stop marks, and contributing to high quality production. 2. Digitalized automatic control system Computer controlling system: There is on I-board in the machine; It can display the loom data such as the running condition, weaving technology data and trouble reasons. All These information can be copied to other looms by memory cards. Memory card: Through digital memory card or central computer, all electrical setting caneasiliy storage or transfer duplicate to other JA10 air jet looms. Electrical setting including: Weft yarn colors, fabric structure, warp yarn tension, weft yarn density, etc. Software can be upgrading through memory card. Fast fabric drop: Use fast interlock locking apparatus, it is easy to change cloth roller, cloth rolling diameter can reach 600mm, and fabric also can be drop while air jet loom running. 3. Weft insertion system: Adopts main nozzle & sub nozzle & profile reed. The solenoid valves were controlled by CPU, which ensures the even air pressure during the weft insertion. When in ultra-high speed or wide reeds, the customers can choose main nozzle & auxiliary nozzle insertion style. It can accelerate the weft yarns under law air pressure, so it avoids weft yarn hurt and keeps it running stably. Sub-gas shielded close to sub nozzle, gas supply distance is short, more suitable for high speed and also power consumption. Using two feelers, making detection or normal weft short or weft bend, as a matter of course, but they also detect filling blow-off or long weft, and never overlook any mis-insertion, the heads are dirt resistant, ensuring a high reliability. New weft-brake device: This device decreases the peak tension, and avoid the breaking and loosing of weft. Vibration model pooling system: Ensure the accumulator release the weft smoothly when the loom is weaving fibrous yarn and wool yarn. 4. Widely shedding system Completely modularized design, customers can choose various shedding device according to different requirement.? Crank shedding for plain fabrics: Max. 6 heald frames; Cam shedding device for plain, twill and satin fabrics: Max. 10 heald frames; Positive or negative electronic dobby, wide weaving range, computer controls the fabric design changing: Max. 16 heald frames. 5. Excellent anti-stop-mark system: Main motor start mode options: The rush start system delivers high-power torque at starting, enabling increased beating power for first pick, eliminating stop marks, and contributing to high quality production. Cloth-fell auto adjustment: Warp let-off immediately once loom stops, avoid the reed which is slowly reversing touch the cloth-fell, and debar the occasion for stop mark. When restart, it comes back to the tension set before and insert at normal cloth-fell. Adjustment for let-off capacity: The let-off capacity can be set freely according to different stop reason and stop time, this can prevent stop marks. One-off insertion: No need beat when restart, directly insert weft, this can prevent stop bar on heavy twill fabrics. 6. Stable cloth-fell Adopts top-mounted temple which increases the advance acclivitous angle for weaving and guide bar which is arranged close to the cloth-fell, therefore, all the double fabrics, triplet fabric, jacquard fabrics and high-density fabrics can get stable cloth-fell. 2sets per 40¡¯GP with pallet.
KEY FEATURES: -- Advanced system: Android 4.4 operating system; quad core 1.2 GHz CPU; RAM 2G -- Three-proof design: IP67 three protection grade, drop resistance from 1.2m -- Visible under strong light; 7 inch LCD screen, 1280x800 IPS capacitive touch screen -- Powerful function: multi function information acquisition configuration (1D/2D bar code scanning, LF/HF/UHF RFID reader, fingerprint identification) -- Multi communication modes: support 4G, WIFI, Bluetooth and many wireless communication modes -- Strong battery life: more than 600 hours of continuous standby -- Support professional GPS: support differential data or common GPS -- Support jacket extension: satisfy custom applications from customers SPECIFICATION: General Specifications Operating System Android 4.4 OS CPU MSM8916, A53, 4 core CPU, 1.2GHz RAM RAM: 2G FLASH: 16G Extended Storage Micro SD, Maximum 32G USB port 5 pin MicroUSB; support OTG OTG Support, through OTG can meet 100M network port, network card setup, PPPoE dial-up, web browsing. Support OTG extend RS232 serial port External port Charge port, headphone port Protection Grade Industrial Protection Grade IP67 Drop Grade Drop resistance from 1.2m Wireless Communication Bluetooth Support 4.0 GPS Support GPS, DBS, GLONASS and professional GPS,Ublox; GPS and Beidou (alternative) WIFI Support IEEE 802.11b/g/n 4G FDD/WCDMA/GSM LTE_FDD B1/B3/B7 LTE_TDD B41/B40 WCDMA B1//B2/B5 GSM 900/1800/1900 Data Acquisition (Optional) Fingerprint identification Support fingerprint data acquisition, fingerprint resolution 150*200 Far infrared meter reading Working frequency 37.9K Barcode Scanning 1D Infrared Scanner Index: Scanning ;speed: 50 times/second Scanning distance: 5.7cm-60.96cm Scanning angle: 53.3 1D Laser Scanner Index: Scanning speed: 104 times/second+12 times/second (two way scanning) Scanning distance: 2.5cm-114.3cm Scanning angle: 47(default) / 35(reduced code) 2D Barcode Scanner Index: Identification ability: 1D, 2D, OCR Scanning angle: rotate 360, incline & deflection ; Field of View: Horizontal 36, vertical ; Depth of field: 4cm-23.5cm Environmental luminance: 0~100,000 LUX RFID LF RFID: 134KHZ LF RFID or 124KHZ LF RFID NFC (HF) RFID: Working frequency: 13.56MHZ Profile: Support ISO/IEC 15693, ISO/IEC 14443A profile Support Cards: SR176, SRIX4K (TYPE-B), I- Code2, TI RFID label-it HF-I, EM4034, Mifare Classic ETC Identification distance: not more than 5cm UHF RFID: Working frequency: 840-960MHz(customization of required frequency band) Support agreement: EPC C1 GEN2/ISO 18000-6C Output power: 10dBm-30dBm Identification distance: not more than 6m Physical Parameters Display Screen 7 inch LCD screen, 1280x800 IPS screen, capacitive touch screen Keyboard Android menu, Homepage, Return, Volume, Barcode, ON/OFF, Reset Camera 2 million pixels front camera, 8 million pixels rear camera with automatic focus and lighting function Headset 3.5mm audio Interface, has mike and telephone receiver LED indicator light Support (ordinary flicker, Call fast flicker, missed calls) three status bar Flashlight Function S Support, can be used for emergency lighting Googleplay store S Support Gravity ;sensor Support Compass Support Vibrating ;motor Support FM Support Rechargeable Lithium Battery 3.7V, 7200mAh Standby Standby current less than 10mA Dimension 208*140*20mm Weight 620g Environmental Characteristics Working Temperature -20 +50 Storage Temperature -40 +60 Humidity 5%-95% relative humidity; no condensation Net Weight : 590g Dimension:209*139*19
