Silicone Coated Fiberglass Fabrics Silicone coated (impregnated) fiberglass fabrics are made of fiberglass basic fabrics coated or impregnated with specially compounded silicone rubber on one or both sides. It has a lot of advantages such as high strength, fire retardant, high temp. resistance, chemical resistance, none-penetrative, non-toxic and so on. Product Feature Properties Used in temperature from-70 C to 300 C Ozone, oxide, light and weathering aging resistance, excellent weatherability used in outdoors and ages can be reached to 10 years. Product Specification Models Ref. No. 3732-80SG1
The combination of laminating an aluminum glass fiber cloth heat shield to a layer of protective fiberglass insulation protects personnel or equipments by reflecting radiant heat.It is always used for fireproof,welding blanket,fire cloth;sleeves and hoods.
Silicone coated fiberglass fabric belongs to silicone fabric. Compared with the silicone calendared fiberglass fabric, it is often quite thin in thickness such as 0.18mm,0.25mm, 0.35mm and 0.45mm. It is composed of good-qualified fiberglass coated with silicone rubber on both sides or either side. Silicone coated fiberglass fabric has such properties as high temperature and weather resistance. Human beings often make use of it as a best electric insulator, as it can withstand dielectric constant 3ï½?3.2, break down voltage between 20ï½?50KV/m. In the meantime, it is much soft and tough so that it can be easily covered on any pipeline to prevent the bad working environment. Often, it is most suitable to be used as the insulation cloth and sleeves. Also, it can be used as sealing material, temperature resistant and anti-corrosion conveyer belt and packaging material. You may find that it has been used as shrink oven, fireproof curtain, isolated liner.
Coated Fiberglass Fabrics , Fire Blanket & Fire Curtains
1. Temperature resistance, it can continuously work under -70¡æ to 280¡æ 2. Weatherability: resistance to ozone, oxygen, sunlight and aging, long using life up to 10 years¡£ 3. Good electric insulator, dielectric constant 3¡«3.2, break down voltage between 20¡«50kv/mm, Carton
Description: PTFE coated fiberglass fabric is fiberglass cloth coated with Polytetrafluoroethylene on the surface to meet customer demands. It offers excellent features such as anti-static, fireproof, heat resistance, corrosion resistance, chemical resistance, waterproof, non-adhesiveness, low coefficient of friction, high tensile strength. PTFE coated fiberglass fabric is compliant for use in high temperature insulation, removable covers and blankets, pipe insulation, food processing, packaging, and handling. Features: fireproof, heat resistance, corrosion resistance, waterproof, anti-static Application: thermal insulation jacket, high temperature insulation, removable covers and blankets, pipe insulation UNIT: square meter MOQ: 500square meter Weight: 400gsm-800gsm Width: 1m, 1.2m 1.5m or customized Yarn Type: E-glass Standing temperature -70-260 degree centigrade Roll length: 50 meter or customized Color: brown, black, white, grey, blue, or customized Weave Type: plain woven Alkali content: alkali free Processing service: cutting Material: fiberglass PTFE Thickness: 0.3mm to 0.8mm Size: can be customized Supply ability: 300000 meters per month Packaging: PTFE coated fiberglass fabric rolls packed in cartons loaded on pallets or according to customers requirements Lead time: 7-30 days
0.6mm thickness 1.2m width Roll with box
Silicone rubber coated fiberglass fabric series The products are made of fine fiberglass with excellent capacity of high temperature and corrosion resistance, coated and rolled with silicone rubber, which is a brand new product with good performance and multiple applications. W:1200mm l:100m
EAS Silicone coated fiberglass fabric is made by special formulated liquid or wet silicone rubber dispersed or calendered into the high quality fiberglass cloth and vulcanized, dried. It inherits the fiberglass insulation fabric's properties and also improve its fireproof, hand fabrication, oil and waterproof, abrasion resistance. All the EAS's fiberglass fabric can finish to silicone cloth. EAS offers various thickness and coating duty silicone fabric, liquid silicone coated fiberglass fabric and calendered silicone coated glass fabric, silicone coated aramid fabric, silicone coated carbon fabric are made as request.
Silicone Coated Fiberglass Fabric is a high-performance, multi-purpose composite material that is made of high-temperature, corrosion-resistant, high-strength glass fiber cloth, which is impregnated or coated with silicone rubber. Properties: 1.Heat resistant up to 280â?? 2.No hot shrink 3.High strength 4.Chemical resistant 5.Good thermal insulation Data: Type: E-glass Coating: Silicone Thickness: 0.45mm Weight: 430g+80g+80g Width: 1000mm Length: 50m per roll Weave: Satin Temperature: fiberglass fabric â?¤550â?? silicone coating â?¤ 280â??
PTFE (Teflon) Coated Fiberglass Fabrics - Crease & Tear Resistant
High Temperature Fiberglass Woven Tape PTFE coated fiberglass fabric takes high quality imported glass fiber as weaving material. The basic material is weaved specially into senior glass fiber cloth substrate. After unique technology such as full immersion, impregnation, coating the cloth with PTFE, different thickness and width of Teflon cloth is finally produced. PTFE Fabric Description Common thickness: 0.08mm 0.12mm 0.13mm 0.15mm 0.18mm 0.25mm 0.3mm We couls supply at most 1.5mm fabric. Common width: 1 meter or 1.25 meter For other width, customization is available as well. Features of PTFE Fabric: 1. High-temperature resistance(-100 to 550). 2. Non-sticky and easy to clean. 3. Food grade and nontoxic. 4. Heat resistance and fireproof. 5. Resistant to chemical corrosion, strong acid and alkali. 6. Good dimensional stability, high strength, and has good mechanical properties. 7. Low friction coefficient (0.05-0.1), the best choice for oil-free self-lubrication. 8. Light transmittance up to 6% 13 %. 9. High insulation property (the value of dielectric constant is only 2.6, and the value of tangent is less than 0.0025). 10. Anti-static and Ultraviolet-proof. Application of PTFE Fabric: 1. Packaging machines. 2. Bag making machines. 3. Heat print machines. 4. Somewhere else where the heat resistance and non-stick are needed.
PTFE coated fiberglass fabrics with & without adhesives and in tickness varying from 0.08 to 0.90 mm. are available for various applications.
black fiberglass tissue can offer widest range of woven fabrics which are made of E-glass yarn. Our woven glass fabrics are manufacture with state of the art weaving technology and the best control over thickness, weight and strength.We can offers the materials engineer a wide choice of control fabric properties to satisfy design needs and objectives. Our extensive range of Fibreglass fabrics are globally recognised for its quality. black fiberglass tissue with fire retardant and alkali-free performance, is suitable as a surface lamination for fiberglass wool and rock wool thermal insulation.
Weight: 430g/m2+80g+80g/m2 Surface Treatment: Silicon Coated Width: 1550mm FOB Shanghai, USD 3.50 - 3.85 Per Square Meters Weave Type: Plain Woven Yarn Type: E-Glass Alkali Content: Alkali Free Standing Temperature: -50~260 degrees Thickness: 0.4mm Coating: 2 Sides Silicone Coating MOQ: 500Square Meter Roll Length: 50m/Roll Payment Terms: 30 days after shipping HS Code: 701940 Delivery Time: 15 days 50Meters 1 Roll, 1 Roll 1 Box, 20 Boxes 1 Pallets 15 Pallets 1x20 FT Container, More than 28,900 Square Meters
Features of PTFE high temperature fiberglass fabric: 1. Dimensional stability, high strength, lengthening coefficient is less than 5%; 2. High temperature resistance, continuous operating temperature is -70-260, can resist up to 320 in a short time 3. non-stick, easy to clear adhesive on the surface; 4. Resistance to bond, easy to clean all kinds of oil stain, dirty spot or other attached in the surface; 5. Excellent resistance of all kind of strong acidic or alkaline corrosion, no burning, endurable to aging.
JTS01 is for compositing,such as car,sports equipment,bags and anything else. It has a proprietary finish and a thin coating of aluminum on the surface. The aluminum coating is 99.99% pure and approximately 200 angstroms in thickness (One angstrom is one ten-billionth of a meter). This coating produces the highly reflective surface. The original Texalium product is the silver metallic material that we use in our wallets. Now there are at least four post treatments which can be done to alter the color of the fabric to give it either a blue, yellow, black, or red appearance.
Jotex Composite Materials Co.,Ltd.' silica cloths are found in a comprehensive range of models. They are designed in keeping with individual specifications as well. Being the foremost supplier & exporter, we ensure our manufactured products exemplify the true standard.They are used in many applications like, welding/cutting protection, molten metal splash protection, heat and flame shielding and more.
PTFE (Teflon) Coated Fiberglass/Glass Cloth - Standard Grade, ,PTFE Coated Fiberglass Fabrics
Place of Origin: Zhejiang, China (Mainland) Brand Name: Jotex Model Number: JT8430W-40-1515 Raw Material: Glass Fiber Fabric Weave Type: Plain Woven MOQ: 200 Pieces Size: 1.2*1.8M Payment Terms: T/T; L/C HS Code: 701940 Delivery Time: 15 Working Days Standard: BS EN 1869:1997(Approved) Fire Class: Kitchen , Workshop , Caravan, Industrial Use Name: 1.2x1.8M Fiberglass Fabric Fire Blanket
