Our Powder activated carbon is manufactured using pure pine wood which is an excellent base for manufacturing activated carbons with good adsorption power. The steam activated process is done by activating the charcoal in a rotary kiln by heating at high temperatures by steam. The activated carbon that comes out from the kiln is called unwashed activated carbon. These unwashed activated carbon has higher ash and iron content. This is reduced by washing the unwashed activated carbon with acid (HCl / H2SO4) and purified water. This results in reduction of ash content to as low as 1% and iron as low as 50 ppm. The gradation of different qualities of activated carbon is done on the basis of Methylene blue value and iodine value. The iodine value is a better test as the particle size of iodine molecule is small enough to penetrate the smallest of pores. We can relate the iodine value of activated carbon directly to its surface area because of the above fact.
Powdered Activated Carbon Powdered activated carbon (PAC) is a fine black powder that is produced by heating carbon-rich materials, such as coal, wood, or coconut shells, in the absence of air to create activated carbon. PAC is widely used in various applications, including water treatment, air purification, gas processing, and industrial processes. In water treatment, PAC is added to the water to remove organic contaminants, such as pesticides, solvents, and pharmaceuticals, as well as taste and odor-causing compounds. The PAC particles attract and adsorb these contaminants, effectively removing them from the water. PAC is also used in wastewater treatment to remove dissolved organic compounds and color from the wastewater. In air purification, PAC is used to remove pollutants, such as volatile organic compounds (VOCs), from the air. The PAC particles adsorb these pollutants, effectively reducing their concentration in the air.
1)Bituminous Coal Granular Activated Carbon Products are available in the following mesh sizes (specialised particle distributions are also available on request). Particle Size Lodine Number Moisture Content Ash Content Hardness Apparent Density Methyl Blue Floating rate 4x8, 6x12, 8x16, 8x18, 8x30, 10x20, 12x35, 12x40 850-1050 (mg/g)
Coal powder activated carbon with coal columnar activated carbon as the selection of high quality anthracite as raw materials, the use of advanced production equipment and process refined processing. The physical properties of coal powder activated carbon: Black amorphous granular or fine powder, no smell, no smell, no sand, not soluble in any solvent. Selective adsorption capacity of various gases, organic pigment and nitrogen base have high capacity of adsorption capacity. Coal powder activated carbon chemical characteristics: coal powder activated carbon not only carbon, but also contains a small amount of chemical combination, such as carbonyl, phenols, ethers, ether. On the surface of these oxides and complex, some derivatives from raw materials, some are activated, after cremation and by air or water vapour generated. In the activation process, some of the raw materials contained in the activation of activated carbon to become ash, ash is the main component of alkali metal and alkali metal salts, such as carbonate and phosphate, etc.. Contact: Ms.Ella Cell phone:0086-18231421837 QQ:3195095761
Powder Activated Carbon Introduction: Powder activated carbon is made of high quality wood chips, which has large adsorption capacity and fast filtering characteristics. Mainly used in all kinds of amino acid or water industry, refined sugar decolorization, monosodium glutamate industry, glucose industry, starch sugar industry, chemical fertilizer, dyes intermediates,and food additives.
We offer Bulk Coal Based Activated Carbon Powder for High Pigment Solution Suga. Powder activated carbon Description: It has good adsorption, can be used in: 1.air purification etc for more information contact
We offer Bulk Coal Based Activated Carbon Powder for High Pigment Solution Suga. Powder activated carbon Description: It has good adsorption, can be used in: 1.air purification etc for more info contact at
High quality coal based activated carbon uses high-quality anthracite as raw material, and is developed through a series of processes such as carbonization, cooling, activation, and washing. Its appearance is divided into black cylindrical shape according to the shape of coal based columnar activated carbon; amorphous coal-based granular activated carbon, also known as coal-based broken activated carbon; black fine powder called coal powdered activated carbon. ã??ã??The high-quality coal-based columnar activated carbon is made of coal-based powdered raw materials and binders through kneading, extrusion molding, carbonization and activation. Coal columnar activated carbon has a developed pore structure, good adsorption performance, high mechanical strength, easy regeneration, low cost, etc.; widely used in the purification of toxic gases, waste gas treatment, industrial and domestic water purification, solvent recovery, etc. .Specifications Model: 1.5mm 3.0mm 4.0mm 6.0mm 8.0mm 10.0mm Other specifications can be adjusted with user needs. ã??ã??High quality coal based granular activated carbon is a black porous solid carbonaceous material. In the early stage, it was obtained by carbonization and activation of wood, hard husk or animal bone, and then converted to coal by crushing, molding or even carbonization and activation with uniform coal particles. The main organic component is carbon, and contains a small amount of oxygen, hydrogen, sulfur, nitrogen, chlorine and other elements. The specific surface area of common activated carbon is between 500 and 1700 m2/g. Has a strong adsorption performance, is an extremely versatile industrial adsorbent.Coal-based granular activated carbon particle size is divided into 1.0, 1.5, 2.0, 3.0, 4.0. Other indicators can be adjusted with user needs. https://www.alibaba.com/product-detail/High-quality-Coal-Based-Granular-Powder_60727486036.html?spm=a2700.7724838.2017115.442.43424e3dOqINF6 ã??ã??High-quality coal-based powdered activated carbon is made from high-quality anthracite as a raw material and refined by steam process. It is black powder, odorless and odorless, and does not dissolve in general solvents. In addition to carbon, the main components of coal powdered activated carbon include oxygen and hydrogen. The coal-based powdered activated carbon has an extremely fast adsorption rate and has a flocculation effect and a filtering effect. It is suitable for the decolorization of sugars such as glucose, sucrose, maltose, etc., as well as the removal, purification and refining of macromolecular pigments in citric acid, cystinic acid, oils and chemical products.Coal based powder activated carbon commonly used specifications: 80 mesh, 120 mesh, 200 mesh, 325 mesh ... other specifications can be produced with the needs of users.
Coal based activated carbon originates from coal that has undergone a steam activation process Coal based carbon has mainly mesopores and macropores and is very popular in gas phase purification portable water purification wastewater purification and aquariumpond water purification applications The carbonaceous product of wood Applications Gas phase purification Water purification system
Granular activated carbons are made from rigid raw materials, giving the necessary hardness to avoid excessive losses due to attrition and handling. They present large internal surface of pore structure, ensuring high adsorption power in specific purposes and uses. They are used in fixed or moving beds as columns where the liquid or gas passes through and gets purified. They can be used in liquid or gas phase continous adsorption process and offer unusual economy in cases where carbon regeneration is favorable. In liquid phase applications they remove colloids and organic substances that give undesirable odors, colors and taste to the products. They are efficiently used for water dechlorination in processes which require super chlorination as well as the removal of organic substances from the water. In vapor phase application they participate in the solvent recovery, adsorption of colors, purification of carbon di-oxide and catalyst support. They are also used to reduce the COD and BOD in effluent waste water. Granular activated carbon is produced from coconut shell charcoal by the process of steam activation. The coconut shell charcoal is fed into the rotary kiln and activated by steam at high temperatures resulting in the evaporation of impurities and opening up of pores on the surface. The resultant big particles are then crushed and sieved to get the desired particle size. Our main grades of granular activated carbon are given as under. We can customize the iodine value as well as the particle size according to your requirements
It used in the field of gas phaseadsorption, recovery of organic solvents such as alcohol, ester, hydrocarbonand aromatic. It used for airfiltration, purification and removal of harmful gases. Mainly used for air purifier,gas mask, operating room, chemical medicine workshop, purification of hotelrooms and organic solvent recovery. Widely used in thepurification and deodorization for the drinking water, in the further (deep)treatment to the toxicity, COD, BOD, Cdonbacillus, etc for the industrialwastewater and municipal wastewater, in the ultra water purification for theelectronic & pharmaceutical industries. Coal granular activated carbon, specifications (4x8 mesh, 5x10 mesh, 8x16 mesh, 8x30 mesh, 12x40 mesh,30x60mesh) Powder 200-325 mesh Main index : iodine value :600-1000mg/g; Moisture: less than 10%; Strength: more than 95%. Chengde JisenCarbon Industry Company has an ISO 9001 certificate. We only do the activatedcarbons which are 100% according to the specifications or customers' detailrequest. As for packaging, generally it is 25 KG PP BAGS or 500 KG PP BAGS.
We are the leading manufacturer, supplier and exporter of coal activated carbon from China. With our experience in activated carbon production and technology and Chinaâ??s abundant raw material resources, we provide high-quality activated carbon at competitive prices. We can provide three types of coal based activated carbon ( granular, pellet and powder type).
Wood Based Powder Activated Carbon is used for decolorizing in sugar liquors, juices,soybean and food industries. Wood powder activated carbon is non-toxic, without taste and it has the appearance of a fine black powder. Mb Value : 140 to 320 Ash:7 to 12%
Coconut shell activated carbon is derived from coconut shells. It has a very high hardness and is more abrasion resistant than any other type. It is a totally natural, environmentally friendly product that has a very small carbon foot print. The carbonaceous product of coconut. Applications â?? Portable water purification Wastewater purification Gold absorption from gold solution Medical use
coal based activated carbon, which use the anthracite for the raw material, made by the production process of crushing,carbonation and activation. Our columnar activated carbon have the advantages of high hardness, developed pores, large specific surface area, and strong absorption. It can be used for removing organic materials and free chlorine in water treatment, and adsorbing harmful gases in the air. It is an excellent adsorbent for air adsorption, drinking water, sewage water, industrial waste water treatment and the chemical &biological protection.
Appearance - Black Powder Particle size - 5-10 um Surface area - 2000 m2/g C content - >95%
The coal based powder activated carbon is made of high quality anthracite coal as raw material; by special production process (first carbonization and activation, then grinding into powder) is refined. This product is the appearance of black powder, are not dissolved under the general solution. Odorless, has a flocculation effect and filtration effects and large surface area, adsorption ability, high purity, filter fast, quality stable.
Company profile: Ningxia Jinbao Star activated carbon Co.,ltd is a profession manufacture of coal based activated carbon, includes columnar activated carbon,granular activated carbon,powdered activated carbon, we have 5 activation furnaces,4 coking furnaces,4 plodders and 5 pelleting machine. We have advanced technology and hold the concept of customer first. Believe us, we will provide you with high quality goods and service, hope we can establish good and long-term relationship. Product application: coal based activated carbon, which use the anthracite for the raw material, made by the production process of crushing,carbonation and activation. Our columnar activated carbon have the advantages of high hardness, developed pores, large specific surface area, and strong absorption. It can be used for removing organic materials and free chlorine in water treatment, and adsorbing harmful gases in the air. It is an excellent adsorbent for air adsorption, drinking water, sewage water, industrial waste water treatment and the chemical &biological protection. Specifications of powdered activated carbon : size: 200mesh , 325mesh methylene blue: 80-200mg/g Moisture: within 5% ash: below 15% Contact Name: staceylee Email:staceylee369@126.com Mob:+86 18152493116 Skype:shily_lee1 Wechat:18152493116
Among its numerous sources, coconut shells have gained significant attention as a sustainable and efficient raw material for producing high-quality activated carbon. Coconut shell-based steam-activated Carbon is mainly used for the removal of chlorine, organic contaminants, color and odor from drinking water to make it suitable for human consumption. Being microporous in internal structure, coconut shell activated carbon is well suited for organic chemical adsorption, including volatile organic chemicals. - One of the prominent applications of coconut shell-based activated carbon is in water treatment processes. It effectively removes impurities, organic contaminants, and heavy metals, ensuring clean and safe drinking water. - It acts as a decolorizing agent, removing impurities and unwanted odors from edible oils, beverages, and food products finding its application in the food and beverage industry. Additionally, it is employed in the purification of sugar syrups, ensuring high-quality and clear syrup for various confectionery and beverage manufacturing processes. - It serves as an excellent adsorbent in the production of drugs, where it eliminates unwanted impurities, colorants, and traces of heavy metals making it ideal choice in pharmaceutical industry too. The high purity and porosity of coconut shell-based activated carbon make it a preferred choice for pharmaceutical manufacturers to ensure product quality and safety.
Minimum Order Quantity:1 Accept Small Orders: No Country Of Origin : India Business Type: Manufacturer, Exporter, Supplier Type: Activated Application: Water Purification Color: Black Product Details Purity : 99% Form : Powdered Hardness : >90% Features & Benefits Powdered activated carbons (PAC) are defined by the ASTM as particles passing through an 80-mesh sieve (0.177 mm) and smaller. CG Carbon manufactures many types of powdered activated carbon products, each specifically engineered to provide a unique pore structure and adsorption properties. By varying manufacturing conditions, internal pore structures are created by imparting unique adsorption properties specific to each product type. The choice of product for a specific application will vary due to differing impurities and proprietary process conditions. The adsorptive capacity of CG Carbon's powdered activated carbon (PAC) makes it ideal for removing a variety of contaminants from water, air, liquids and gases. With efforts to be environmentally responsible, CG Carbon can reactivate spent Granular Activated Carbon (GAC) through thermal oxidation to make react PAC. Cg Carbon backs its products with comprehensive analytical support including feasibility studies and cost evaluations, together with complete system design, service, and troubleshooting. Customers get the expertise of an industry expert in powdered activated carbon backed by a commitment to service one can trust
