Clado Fix Superemo is a new age polymer modified adhesive for fixing natural stones, tiles etc. on floor and walls with supreme strength and adhesion. Specially for cladding heavy stone & tiles with water & heat proofing.
Total Moisture : 1% ash Content :10% Volatille Matter :17% Fixed Carbon :71% Total Sulfur : 0,07% Gross Caloric Value : 6800 Kcal/Kg
Total Moisture : 1% ash Content :10% Volatille Matter :17% Fixed Carbon :71% Total Sulfur :0,07% Gross Caloric Value :6800 Kcal/Kg
Total Moisture : 1% ash Content :10% Volatille Matter :17% Fixed Carbon :71% Total Sulfur :0,07% Gross Caloric Value :6 800 Kcal/Kg
Total Mousture =---- Ash Content : 4,26% Volatile Matter : 4,79% Fixed Carbon :90,95% Total sulfur :0,05 % Gross Caloric Value :7676 Kcal/Kg Ready for grade = AB ABC CD DE
Specification Size : SS-S-M-L Packaging : Carton box @10kg / 20kg Fixed Carbon : 91% Calory : 7500 kcal / kg Total Moisture : 0% Ash Content : 2% One container 40 high cube can load +20 tons
Specification Grade : AB & ABC Packaging : Carton box @10kg Fixed Carbon : 84% Calory : 7100 kcal / kg Total Moisture : 7,4% Ash Content : 3,9% One container 40 high cube can load +27 to
Specification Size : 8cm / 6cm Packaging : Carton box @10kg / 20kg Fixed Carbon : 67% Calory : 6500 kcal / kg Total Moisture : 5,3% Ash Content : 11% One container 40 high cube can load + 27 tons
Specification Size : 8cm / 6cm Packaging : Carton box @10kg / 20kg Fixed Carbon : 67% Calory : 6500 kcal / kg Total Moisture : 5,3% Ash Content : 11% One container 40 high cube can load + 27 tons
Specification Size : 4cm / 4cm Packaging : Carton box @10kg / 20kg Fixed Carbon : 67% Calory : 6500 kcal / kg Total Moisture : 5,3% Ash Content : 11% One container 40 high cube can load +27 tons
Specification Size : 10cm / 20cm Packaging : Carton box @10kg / 20kg Fixed Carbon : 67% Calory : 6500 kcal / kg Total Moisture : 5,3% Ash Content : 11% One container 40 high cube can load + 27 tons
Specification Size : 5cm - 20cm Packaging : PP bag @20kg Fixed Carbon : 67,1% Calory : 7000 kcal / kg Total Moisture : 2,9% Ash Content : 3,7% One container 40 high cube can load + 19 tons
Carbon Blocks used in furnace having a great alternative against Petcoke. As it has high melting power and cheap as compared to Petcoke. Here in India, we are a supplier and exporters of Carbon blocks. Parameters- Total moisture (Mt): 1.80% Ash(Aad): 13.07 Volatile matter (Vad): 13.94 Fixed Carbon (FCad): 77.88 Sulfur (S): 3.10
Focus-6500 butyl tapes has good performance in waterproofing and sealing, non-hardening, weather resistance, strong adhesion, adaptation and anti-aging . Technical Data Product Series FOCUS-6500 Series Application Home Decoration Industry Elongation 500% Heat Resistance 90, no flowing within 2h Low Temperature Flexibility 40, no crack on surface within 24h Peel Strength 22N/cm Tensile Strength 210KPa Anti UV non-hardening and no cracks within in 2000h Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet Advantages Smooth and Delicate. Excellent Adaptation. Greene nvironmental protection. Non-toxic tasteless. Good performance in waterproofing and sealing. Best quality with outstanding service life. Applications Focus-6500 butyl tapes are widely used in bathrooms, kitchen, home decorations, office areas and other home applications, for its good waterproof/mildew proof /airtight and environmental property.
Available stock in Rotterdam tank farm for jet fuel A1: CI DIP AND PAY FOB PROCEDURE 1. Buyer sends ICPO, Company Profile along with current and valid TSA company registration certificate+ buyer passport number + company profile to seller on receipt of seller's soft corporate offer. 2. Seller issues commercial invoice of the product in tanks at the port of Rotterdam and returns commercial invoice. 3.seller will provide the Proof of Product (PPOP) documents for product verification Which include Tank Storage Receipt (TSR) Certificate of origin Statement of Product Availability, Authorization to Verify (ATV), and Dip Test Authorization (DTA) Letter. 4.After successful verification of the PPOP, the buyer will contact the seller's Tank Storage Company to request a 1-day payment invoice to enable Buyer obtain all the necessary authorization and clearance for a Dip Test schedule. *Or* Buyer must have a minimum of 10 days TSR to avoid one day tank extension. 5.Upon a successful Dip Test conducted in the seller's tanks, the buyer will make the payment for the total product cost based on the SGS Report via MT103. The seller will transfer title ownership to the buyer and send all exportation documents. The buyer can then either transfer the product into a vessel or take over the seller's tanks for further storage. 6. Upon a successful Dip Test conducted in the seller's tanks, the buyer will make the payment for the total product cost based on the SGS Report via MT103. The seller will transfer title ownership to the buyer and send all exportation documents. The buyer can then either transfer the product into a vessel or take over the seller's tanks for further storage. 7. All intermediaries involved in the transaction will sign a Non- Circumvention, Non-Disclosure Agreement (NCNDA) and International Master Fee Protection Agreement (IMFPA). These documents will be forwarded to the seller for endorsement, and the seller will provide the Endorsed NCNDA/IMFPA and Authorization to Sell and Collect (ATSC).
CI DIP AND PAY FOB TTT Rotterdam PROCEDURE 1. Buyer sends ICPO, Company Profile along with current and valid TSA company registration certificate+ buyer passport number + company profile to seller on receipt of seller's soft corporate offer. 2. Seller issues commercial invoice of the product in tanks at the port of Rotterdam and returns commercial invoice. 3.seller will provide the Proof of Product (PPOP) documents for product verification Which include Tank Storage Receipt (TSR) Certificate of origin Statement of Product Availability, Authorization to Verify (ATV), and Dip Test Authorization (DTA) Letter. 4.After successful verification of the PPOP, the buyer will contact the seller's Tank Storage Company to request a 1-day payment invoice to enable Buyer obtain all the necessary authorization and clearance for a Dip Test schedule. *Or* Buyer must have a minimum of 10 days TSR to avoid one day tank extension. 5.Upon a successful Dip Test conducted in the seller's tanks, the buyer will make the payment for the total product cost based on the SGS Report via MT103. The seller will transfer title ownership to the buyer and send all exportation documents. The buyer can then either transfer the product into a vessel or take over the seller's tanks for further storage. 6. Upon a successful Dip Test conducted in the seller's tanks, the buyer will make the payment for the total product cost based on the SGS Report via MT103. The seller will transfer title ownership to the buyer and send all exportation documents. The buyer can then either transfer the product into a vessel or take over the seller's tanks for further storage. 7. All intermediaries involved in the transaction will sign a Non- Circumvention, Non-Disclosure Agreement (NCNDA) and International Master Fee Protection Agreement (IMFPA). These documents will be forwarded to the seller for endorsement, and the seller will provide the Endorsed NCNDA/IMFPA and Authorization to Sell and Collect (ATSC).
TECHNICAL DATASHEET EcoTexTM -SL55 - PVA FREE ONE-SHOT PRODUCT DESCRIPTION Powder types unique one-shot product which needs no extra native starch, modified starch, binder, softener, lubricant to be added further. It is mainly used for Shuttle-less loom woven warp yarns counting above the 40s to 60�¢??s Cotton. Products are made from grafted starch, anionic polymers, and synthetic fatty matters. It contains a maximum of 13% moisture and an optimized viscosity level. Easily disperse in cold water with little swelling property due to high binding property. SPECIFICATIONS 1.Appearance - Off white powder 2.pH value of 7% solution - 5 to 7 3.Solubility - Partially soluble in cold water 4.Viscosity of size mix - 4 to 5 sec (SITRA -6mm cup) 5.Total Moisture - Max 13% 6.Bulk density - 0.5 to 0.6 g/ml 7.Total ash - Max4% COOKING METHOD 1. Fill the required quantity of water in a cooker 2. Gradually add EcoTexTM-SL55 and min for 2 min. 3. Close the pressure cooker lid. 4. Open the steam value and cook to @ 120�? �ºC or 35psi. 5. Retain in the cooker for 15 to 20 minutes. 6. Then transfer the size mix to storage. PROPERTIES 1. Moisture regain: The formation of thin flexible film absorbs water molecules from atmospheric air that maintains the required moisture content of the sized yarn. This property improves the weaving efficiency by reducing the warp stops. 2. Film property: The very thin strong film gives the inter fiber penetration that improves yarn tensile strength. Optimum elongation and flexible property significantly reduce warp break by overcoming the applied tension during weaving. 3. Abrasion resistance: The strong film withstands the mechanical friction between yarn to yarn and yarn to machine parts like reed, dropper pin, heald wire, weft picking element. DE-SIZING Easily de-sizable product with hot alkali treatment. STORAGE Keep away from direct sunlight and store in a cool, dry, and well-ventilated place. STABILITY Stable for one year from the date of manufacture. PACKING Available in 25Kg net weight PP bags with moisture-proof liner inside
EcoTexTM-SL20 - PVA FREE ONE-SHOT PRODUCT DESCRIPTION New generation eco-friendly one-shot product for a high-speed shuttleless loom. It is mainly used for 6 to 203 cotton yarns sizing. This product is entirely biodegradable and ecological. Products are made from grafted starch, anionic polymers, and synthetic fatty matters. It contains a maximum of 13% moisture and an optimized viscosity level. Easily disperse in cold water with little swelling property due to high binding property. Having high penetration power and plasticizing power for heavy construction fabrics weaving. SPECIFICATIONS 1.Appearance - Off white powder 2.pH value of 5% solution - 6 to 8 3.Solubility - Partially soluble in cold water 4.Viscosity of size mix - 5 to 6 sec (SITRA -6mm cup) 5.Total Moisture - Max 13% 6.Bulk density - 0.5 to 0.6 g/ml 7.Total ash - Max4% COOKING METHOD 1. Fill the required quantity of water in the cooker. 2. Gradually add EcoTexTM-SL20 and mix for 2 min. 3. Add other ingredients and mix for 2 min. 4. Close the pressure cooker lid. 5. Open the steam value and cook to @ 120�? �ºC or 35psi. 6. Retain in the cooker for 15 to 20 minutes. 7. Then transfer the size mix to storage. PROPERTIES 1. Moisture regain: The formation of thin flexible film absorbs water molecules from atmospheric air that maintains the required moisture content of the sized yarn. This property improves the weaving efficiency by reducing the warp stops. 2. Film property: The very thin strong film gives the inter fibre penetration that improves yarn tensile strength. Optimum elongation and flexible property significantly reduce warp break by overcoming the applied tension during weaving. 3. Abrasion resistance: A strong film withstands the mechanical friction between yarn to yarn and yarn to machine parts like reed, dropper pin, heald wire, and weft picking element. DE-SIZING Easily de-sizable product with hot alkali treatment. STORAGE Keep away from direct sunlight and store in a cool, dry, and well-ventilated place. STABILITY Stable for one year from the date of manufacture. PACKING Available in 50Kg net weight PP bags with moisture-proof liner inside.
Shubhlaxmi Industries is a manufacturer and exporter of fresh Indian red chilli flakes of best quality. They are packed in tamper proof container so that the freshness is totally sealed. Its also known as "PAPRIKA", ITS prepared from mild red chili pepper, its flavor ranges from Hot to Mild, Paprika is equally valued for its taste and its bright red colour, derived from capsanthin. Dry Chilli flakes is a condiment consisting of dried and crushed chilli peppers. Nowadays it shares table space along with salt and pepper in many hotels and restaurants, as to enhance visual apperence of dish as well. Chilli flakes is a must ingredient in Mexican and Italian cuisines. When food is topped up with chilli flakes, the food taste is elevated to just another level. It has become a convenient choice to add heat to flavor up your pizza or curry with Indian Red Chilli Flakes. Specification Kind : Teja Chili/s4 Sannam/273 Wrinkle Hs Code : 09042219 Color Value : 35-100 Max Asta Mesh Size : 2mm To 6mm Shu Level : 9000-75000 Seeds % : 5-30% Max Moisture : 10-12%max Aflatoxin : 5-30ppb Max Quality Assurance : Sgs, Geo-chem, Spice Board Loading Capacity ; 16mt In 20'fcl & 25mt In 40'fcl Packing : 25/50 Kg. New Multi Wall Paper Bag
Brazilian origin Icumsa 45 white refined sugar available for CIF term. Procedure as follows: 1. Buyer issues a Letter of Intent (LOI) that includes the terms and other conditions listed here with their requested product, quantity and requested price. Once the LOI is received from the Buyer, the seller will issue the COMPLETE CORPORATE OFFER (FCO) within 48 hours confirming the product, quantity and selling price. 2. Buyer confirms and approves the FCO within five (5) days; signed and stamped, and attaches their ICPO + CIS to the seller. In countries where government clearance and/or quota is required, proof of such customs clearance and/or quota will be required at time of ICPO. 3. At the Buyerâ??s request and sellerâ??s discretion, a meeting with the buyer and buyer's legal representative and seller may take place via zoom, google meet or similar. ( Optional ) 4. After the signed FCO + ICPO + CIS has been received, verified and approved (and any necessary meetings taken place), the seller will issue the contract (SPA) to the buyer on the agreed terms. 5. Once the contract is drawn up and accepted by the buyer, the buyer must return the contract within a maximum of two (3) days. 6. After receiving the contract accepted by the buyer, the seller will send a signed, sealed copy to the buyer together with the Proforma Invoice (PI) 7. Buyer will have 48 hours to signs and return the Invoice. 8. Once the Invoice is accepted in-full, the Buyer and Seller will deposit a copy of the fully executed contract (SPA) with the respective banks. 9. Within seven (7) days from the deposit of the contract (SPA), the buyerâ??s bank will issue the financial instrument ( MT 760 SBLC / MT 700 DLC ), 100% open, confirmed, irrevocable, non transferable, divisible, and negotiable for the total amount of one month, renewable during the duration of the contract plus one day. Buyer's issuing bank must be a first-class, global bank accepted by the sell
