Description CC-100M is a waterproofing additive for concrete, mortar and cementitious grout. Use Beams, foundations, masonry laying, floor and wall cladding mortars, plasters, slabs, slope walls, buried structures (water tanks, reservoirs and pools), waterproofed, reinforced and reinforced concrete, etc. Technical Data and Property Ambient temp.: 25, 50±5% R.H. Packaging : 20kg /pail Appearance : Grayish white powder Odor : Odorless pH : 12 ~ 13 Relative Density : 1.9 ~ 2.1 g/cm3 Absolute Specific Mass : 2.2 ~ 2.7 g/cm3 Flammability : Non-flammable Solid Solubility : insoluble **Results have been obtained from tests performed under standard conditions and may vary depending on application conditions.
Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)
Checking Item Test Standard Sodium oxide(Na2O)% 28.00-30.00 Silica(SiO2)% 27.00-29.00 Water insoluble% 0.2 Fe(ppm) 200ppm Whiteness% 80 Bulk Density 0.80-0.97g/cc PH of 1.0% Solution 12-13 Melting Point 72.2 ParticularSize % (16-30mesh) 90 98
Product Features The purity of the product, calcium and phosphorus ratio appropriate to ensure a higher degree of its biological effects. Phosphorus content greater than 21% of the products, their biological effects better. This unique high-tech companies use technology to make our products crystallization, high purity. Drying process advanced products, products with low free water under the premise that the product does not lose crystallization of water, avoid the product in the drying process for the loss of water caused by crystallization of biological effects of the reduction. coarse particles MDCP in the animals stay in the stomach longer and more conducive to the absorption of calcium phosphate, the product produced by micro-particles MDCP form, without any chemical binder. Specifications Appearance white powder or granule Phosphate  21% min Calcium     15% min Fluorine    0.18% max Arsenic    30ppm max Pb   30ppm max Source of OriginRock Packing and Storage Knitted bags lined polyethylene plastic bags double packaging, Weighing 25Kg. Transportation-and harsh rain. Stored in a cool, ventilated, dry place.
Monocalcium Phosphate (MCP) Feed grade Product Features The purity of the product, calcium and phosphorus ratio appropriate to ensure a higher degree of its biological effects. Phosphorus content greater than 22% of the products, their biological effects better. This unique high-tech companies use technology to make our products crystallization, high purity and its harmful impurities significantly below standards:HG28611997 Drying process advanced products, products with low free water under the premise that the product does not lose crystallization of water, avoid the product in the drying process for the loss of water caused by crystallization of biological effects of the reduction. Specifications Appearance white powder or granule Total P 22%min Ca 13-18% F 0.18% max As 10 ppm max Pb 10ppm max Moisture 4%max Source of OriginRock Packing and Storage Knitted bags lined polyethylene plastic bags double packaging, Weighing 25Kg. Transportation-and harsh rain. Stored in a cool, ventilated, dry place
Commodity: Dicalcium phosphate Feed Grade Use DCP is the feed preparation of raw materials, Animal right to supplement calcium needs. Coarse its products more applicable to the preparation hens, ducks feed, concentrate feed and premix. Product Nature Molecular Formula:CaHPO4·2H2O,Molecular weight:172.09,After drying with loose white powdery crystals or granules. Neutral products, the melting acid, water-soluble, hygroscopicity small, heated to 90 around gradually lose water of crystallization. Product Features The purity of the product, calcium and phosphorus ratio appropriate to ensure a higher degree of its biological effects. Phosphorus content greater than 18% of the products, due to a small amount of MCP, and its biological effects better. This unique high-tech companies use technology to make our products crystallization, high purity and its harmful impurities significantly below standards:HG26362000 Drying process advanced products, products with low free water under the premise that the product does not lose crystallization of water, avoid the product in the drying process for the loss of water caused by crystallization of biological effects of the reduction. Coarse particle DCP in the animals stay in the stomach longer and more conducive to the absorption of calcium phosphate, the product of Micro-particle DCP granulation from mechanical, without any chemical binder. Specifications Appearance white and gray powder/granule Total P 18% min Calcium 21% min F 0.18% max As 30 ppm max Pb 30 ppm max Packing and Storage Knitted bags lined polyethylene plastic bags double packaging, Weighing 25Kg/50KG/1000Kg. Transportation-and harsh rain. Stored in a cool, ventilated, dry place.
Rose damascena oil, rose water, rose absolute, rose concrete, rose oil alba, rose alba water, lavender oil, mint water, pine water, lavender water, natural mouthwash, rose soap, lavender soap, mint soap, essential oils, rose oil, peppermint essential oil, juniper essential oil, rose geranium essential oil, lavender essential oil, sinus sylvestnis essential oil, sage essential oil, shampoo with rose oil keratin, balm hair mask, body lotion with rose oil, shower gel with rose oil, shampoo with lavender oil, shower gel with lavender oil, dry rose petals, dry lavender petals, rose honey, natural candles, natural perfumes, natural cosmetic, natural skincare, aromatherapy, scent, natural cosmetic raw materials, eye drop, perfume composition, scented candle, damascena cc face cream, cosmetic, skincare, beauty, personal care , rose water drinking, soft drink, fruit juices, flavored drink, rose wine,.
PRODUCT DATA SHEET ACID RESISTANT BRICK Material : RED SHALE Type Acid Resistant Brick Size (mm) 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK) Specification : ASTM C279, ASTM C410, IS 4860-1982 DESCRIPTION : We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required. FEATURES OF ACID RESISTANT BRICK: Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature AREA OF APPLICATION: Chemical Analysis (Average) Acid and Alkali Storage Tank Farms Demineralization plants and Water treatment plants Chimney inside lining, FGD linings Towers and Columns Process Vessels and Tanks Sewerage Treatment Plants and Lines Industrial Flooring and Bund Areas Chimney and Flue Gas Linings Hoppers and Chutes SiO266.4 Al2 0324 TiO21.1 Fe2 O31.1 K2 O + Na2 O2.5 NOT RECOMMENDED: HF acid or other fluoride solutions Heavy thermal shock Typical Physical Properties of GANESHAS Acid and Chemical Resistant Brick Characteristic RED SHALE ACID RESISTANT BRICK Test Standard Bulk Density, gm/cc - 2.3 to 2.35 ASTM C-20 -Water Absorption, % - 0.1 to 1.5 IS 4860-1968 Apparent Porosity, % -0.5 to 1.75 S 4860 Acid Solubility (H2SO4), Loss in Mass,% -0.1 to 1.8 ASTM C-279 Modulus of Rupture, PSI -2133 to 3555 ASTM C-67 Compressive Strength, Kg/cm2 - 700-900 IS 4860-1968 Abrasion Resistant , Volume in mm3 -69 to 85 EN 102 Surface Hardness, MOHS Scale - 7
ALKAMEDI ionizers are using a single filtration system with 3 different filter types at the moment offers the most reliable and powerful water filter with state-of-art technology of ALKAMEDI. â? � � � � FB2 : 6 steps of Carbon Block Compound Filter â?¡� � � � FU3 : 8 steps of Advanced Ultra Hollow Membrane Purification Filter â?¢� � � � FNC : 7 steps of NANO Silver Carbon Block Compound Filter The effectiveness of the filtration is determined by the valid filtration capacity verified by a testing institution, and this product is composed of a nano-carbon block composite with a valid water capacity of 3,600 liters for approximately 6 months. It is recommended to use for approximately 6 months and a voice guide will inform you when it is time to replace the filter. Alkamedi does have all kinds of certificates related to each continents and countries we export to such as  CE, CB, UL, NRTL, TUV� etcâ?¦in order to meet all electrical regulations in each countries and regions.
ALKAMEDI ionizers are using a single filtration system with 3 different filter types at the moment offers the most reliable and powerful water filter with state-of-art technology of ALKAMEDI. â? � � � � FB3 : 6 steps of Carbon Block Compound Filter. â?¡� � � � FU4 : 8 steps of Advanced Ultra Hollow Membrane Purification Filter. (Carbon Block Compound + UF Module Filter)� � � Expected in Q1, 2024 â?¢� � � � FN2 : 6 steps of NANO Silver Carbon Block Compound Filter. (Carbon Block Compound + NANO Filter)� � � Expected in Q1, 2024 The effectiveness of the filtration is determined by the valid filtration capacity verified by a testing institution, and this product is composed of a nano-carbon block composite with a valid water capacity of 3,600 liters for approximately 6 months. It is recommended to use for approximately 6 months and a voice guide will inform you when it is time to replace the filter. Alkamedi does have all kinds of certificates related to each continents and countries we export to such as CE, CB, UL, NRTL, TUV etc in order to meet all electrical regulations in each countries and regions.
Molecular Formula: Na2O SiO3 Cas No.: 6834-92-0 Appearance : white, uniform, beaded. Characteristics: This product possesses high alkaline and defoul character, which is easy to soluble in water, good dispersibility and emulsifiability, not soluble in alcohol. Na2O - 28.0-30.0% SiO2 - 27.3-29.2% Whiteness - 80% Min Fe - 100ppm Max Bulk density - 0.80-0.97g/cc Particle Size(14-60mesh) - 90% Min
Anti-allergic Ultrasonic seam Soft nose Barrett Latex and fiberglass free Single use only Packing: 50 pcs/box, 2.000 pcs/carton 3-PLY DISPOSABLE FACE MASK STRUCTURE 1st Layer: Water-repelling, non-woven fabric. Prevents droplet and spray penetration. 2nd Layer: Electrostatic-induced melt-blown polypropylene, blocks dust and microbes (>99%). 3rd Layer: Fine bicomponent (PP/PE) fabric, absorbs moisture and provides soft and non-sticky feel.
Technical Data Sheet Of Accoset-50 ALUMINA MORTAR (Test Certificate) General Properties A. Max service temperature - 1500 oC B. Maximum grain size - 0 - 1.5 mm C. Water required for mixing - 22 - 30% D. Setting - Airsetting E. Sintering Temp - 1550 oC Chemical Properties A. Al2O3 - 50.00% B. SiO2 - 31.00% c. Fe2O3 - 5.00% D. LOI - 7.00% Physical Properties A. Dry Density - kg / m3 B. CCS - 17 kg / cm2 after drying at 110C / 24 hr C. MOR - 20 kg / cm2 at 110 oC/ 24 hr 18 kg/cm2 at 800 C/ 3 hr Thermal Properties - A. Refractoriness ( Orton / C) - 31.5 orton cone/1699 oC Packaging - 25 - 50 kg bags Storage Life - 12 months Delivery State - Dry
Features: Suitable for OR, ER, patient care area, oral, dental procedure, clinics, isolation, IC practices, patients and other applications. 1. Type: Flat shape, 3-ply, non-sterile 2. Size: For adults 3. Outer Layer: Water-repellent non-woven 4. Middle Layer: High level static filtration non-woven 5. Inner Layer: Microfilter Thermal-bond non-woven 6. Nose band: PE iron wire
Wearing a mask is a fashion unique, inspires imagination, cultivates the creative spirit, improves school or company image, and dresses stylishly and effectively to prevent covid-19. 1. Type: Diamond shape, 3-ply, non-sterile 2. Size: M, L 3. Color: as photo 4. Outer Layer: Water-repellent non-woven 5. Middle Layer: High level static filtration non-woven 6. Inner Layer: Microfilter Thermal-bond non-woven 7. Nose band: PE iron wire
Code 82800: Protects wound from contaminants and absorbs secretion. Moisturizes, benefits healing, comfortable Features: 1. Moisturizes, benefits healing, hypoallergenic. 2. Water-resistant and dirt-repellent 3. Flesh color, soft and comfortable. Size: 6 cm x 2.5cm x 7 Dressings (S) 6 cm x 4.0cm x 5 Dressings (M) 6 cm x 8.0cm x 4 Dressings (L) Material: PU, CMC
Code 93170: Suitable for Anti-pollen and air pollution. Features Medical level for general use. Non-woven material 99% BFE at 3 micron. Type: Flat shape, 3-ply, non-sterile, earloop Color: Black Nose band: PE iron wire Outer Layer: Water-repellent non-woven Middle Layer: High level static filtration non-woven Inner Layer: Microfilter thermal-bond non-woven
Features Utilizes special filtration layer for good breath ability and protection. Along with the Motex loop adjuster provides great coverage to decrease leakage. Size: For adults Material: Non-woven, elastic earband, nosewire, PP air filter Outer Layer: Water-repellent non-woven Middle Layer: High level static filtration non-woven Inner Layer: Microfilter thermal-bond non-woven
Code 93100-Sï¼? For ages 6-12 Features Suitable for OR, ER, patient care area, oral, dental procedure, clinics, isolation, IC practices, patients and other applications. 3-ply, non-woven material, 99% BFE at 3 micron. 1. Type: Flat shape, 3-ply, non-sterile 2. Size: For kids 3. Color: Green, blue, pink, white 4. Outer Layer: Water-repellent non-woven 5. Middle Layer: High level static filtration non-woven 6. Inner Layer: Microfilter Thermal-bond non-woven 7. Nose band: PE iron wire
Code 93100: 3-ply, non-woven material 99% BFE at 3 micron Features: Suitable for OR, ER, patient care area, oral, dental procedure, clinics, isolation, IC practices, patients and other applications. 1. Type: Flat shape, 3-ply, non-sterile 2. Size: For adults 3. Color: Green, blue, pink, white 4. Outer Layer: Water-repellent non-woven 5. Middle Layer: High level static filtration non-woven 6. Inner Layer: Microfilter Thermal-bond non-woven 7. Nose band: PE iron wire
