Carbon Electrodes Suppliers and Manufacturers

1.DIAMETERS AVAILABLE: DIAMETER FROM 500MM TO 1400MM. 2.STANDARD GRADES -NORMAL AND HIGH. 2.1).NORMAL GRADE RESISTIVITY (UOM ): 45 MAX BULK DENSITY(G/CM3 ): 1.55 MIN BENDING STRENGTH (MPA ): 3.5 �¯�¿�½?? 7.0 COMPRESSIVE STRENGTH (MPA): 20 MIN C.T.E.(100 -600 C, 10 -6/C ): 3.2 �¯�¿�½?? 4.8 ASH: 2.5% MAX 2.2). HIGH GRADE: RESISTIVITY (UOM ): 38 MAX BULK DENSITY(G/CM3 ): 1.58 MIN BENDING STRENGTH (MPA ): 4.0 �¯�¿�½?? 7.5 COMPRESSIVE STRENGTH (MPA): 20 MIN C.T.E.(100 -600 C, 10 -6/C ): 3.0 �¯�¿�½?? 4.6 ASH: 2.0% MAX 3. CURRENT CARRYING CAPACITIES: 3.1).FOR NORMAL GRADE: DIA CAPACITY CURRENT DENSITY (MM) (A) (A/cm2) 780 31500 6.6 800 33100 6.6 850 37400 6.6 870 38000 6.4 900 40600 6.4 920 42500 6.4 960 46300 6.4 1005 49900 6.3 1020 50600 6.2 1060 54600 6.2 1100 57900 6.1 1146 62800 6.1 1205 69500 6.1 1250 71100 5.8 1272 73700 5.8 1305 74900 5.6 1321 76600 5.6 1355 77700 5.4 1400 80000 5.2 3.2).FOR HIGH GRADE: DIA CAPACITY CURRENT DENSITY (MM) (A) (A/cm2) 780 36200 7.6 800 38100 7.6 850 43100 7.6 870 43900 7.4 900 47000 7.4 920 49100 7.4 960 53500 7.4 1005 57000 7.2 1020 57900 7.1 1060 62600 7.1 1100 66400 7.0 1146 72100 7.0 1205 79800 7.0 1250 82200 6.6 1272 85100 6.6 1305 86900 6.4 1321 88900 6.4 1355 89400 6.2 1400 92300 6.0 PLEASE CONTACT US FOR MORE INFORMATION.

Carbon Electrode Paste / Soderberg Electrode Paste Quality Specification: At the customers end the paste is fed in the upper part of the electrode it softens and melts forming the shape of the electrode casting. Flow ability of carbon electrode paste is essential for proper operation of electrode. It is important that the paste flows at a reasonable temperature and fills the casting of the electrode, maintaining a consistent mixture of components. The paste then gets baked to a solid mass as it moves down and is capable of passing the required current to the furnace charge. The plasticity of paste , the measure of its flow ability is controlled in the mixer by adjusting the binder content or percentage of coke fines. The lower baked part of the electrode is the final electrode product. The physical properties of this paste are of vital importance to ensure proper electrode operation without breakages. Green paste: A) Plasticity : 30-35%, 35-40% (or as per buyers requirement ) B) V.M. : 12-14% C) ash : 0.5% max D) f.C. : 86% min E) Apparent density : 1.58gm/ccmin. Baked paste : A) f.C. : 99% min B) porosity : 22-24% C) Apparent density : 1.36gm/cc min D) ccs : 250kg/cm2 min E) electrical resistivity : 70-90 micro ohm meter. Size : mould of 24ö dia & 4ö thick (wt. Approx 46kg. To 48 kg. Per block). 24" dia & 4"thick approx 46 to 48 per block. Size in briquette form or as per buyers requirement can also be made available.

The electrodes are packed in wooden boxes and wooden frame bottoms, and the joint holes are protected by a foam cover and bundled with a packing steel strip. The electrode joints are packed in cartons, foam boxes or packed in large wooden boxes and bundled with baled steel strips. When more than two electrode joints are installed in the same carton, the joints are separated by corrugated paper or foam plastic sheets. When the electrode and the joint are integrally connected, the electrode joint hole and the joint are packaged with a foam cover, and then wrapped in a wooden box and a wooden frame, andBundled with baled steel strips. UHP graphite electrode Manufacturer has advanced production equipment, complete facilities, advanced testing methods and professional team. Always put quality in the first place, from material selection to final machining, each process is strictly and quality-tested and controlled, and carefully create high-quality graphite products for customers.

Egg shape electrode paste , ton bags package Trapezoid shape electrode paste, upper 12.5*7.5cm, bottom: 9.0*4.5cm, height:7.5cm Cylinder sodergerg electrode paste, customized. such as 600*500mm,450*750mm,500*1000mm.etc.

Graphite Electrodes 1. Graphite Electrodes, petroleum coke and needle coke as raw materials, then calcined, mixing, extrude/forming, baking, impregnate and machining. graphite electrode is a conductor that heats and melts in an electric arc furnace. According to the quality index, the graphite electrode can be divided into RP,HP,UHP grade.Advantage 1 High purity and high density, strong chemical stability 2 Surface can be treated with anti-oxidation, long service life 3 General power graphite electrode Conductive, thermal and thermal shock

Rate - RP/HD/HP/UHP Dia- 100mm-800mm Length - 1500mm-2800mm

Product Description graphite electrode(High quality, competitive price,ready stock):   1.Diameter:150~700mm   2.Length: 1700~2400mm   3.Nipples: 4TPI     We are one of leading graphite electrode manufacturer in North of China, till now, we have production capacity 30,000 tons per year, and we exported graphite electrode to Europe and America near 500 tons per month, and export graphite scrap to Europe 300 tons per month.   Now we hope to establish business relationship with you and your company, believe it will come true in near future. z

Type model Gb chemical composition(%)mechanical properties Cmnsispotherr el /r p 0.2 mpar m Mpaa %a kv 421e43130.100.32/0.550.300.0350.04-330420170 íp c Th422e43030.100.32/0.550.250.0350.040-330420220 íp c Th422gme43030.100.32/0.550.250.0350.040-330420220 íp c Th423e43010.100.32/0.550.300.0350.040-33042022-20 íp c Th426e43160.101.250.900.0350.040-33042022-30 íp c Th502e50030.100.50/1.250.300.0350.040-400490200 íp c Th506e50160.101.600.750.0350.040-40049022-30 íp c Th506de50160.101.600.750.0350.040-40049022-30 íp c Th506fee50180.101.600.750.0350.040-40049022-30 íp c Th507e50150.101.600.750.0350.040-40049022-30 íp c Typemodel gb(aws)usage 421e4313for welding low carbon steel light-gauge sheet structures . Th422e4303for welding key structures of low carbon steel as well as low-alloy steel with same strength. Th422gme4303suitable for cosmetic welding of key structures of low carbon steel ad low-alloy steel Th423e4301for welding low carbon steel structures. Th426e4316for welding key structures of low carbon steel and low-alloy steel with same strength Th502e5003for welding general structures of 16mn and low-alloy steel with same strength Th506e5016for welding medium carbon steel structures and some key structures of low-alloy steel like 16mn and etc. Th506de5016for kacking welding and back sealing weiding is not necessary. Th506fee5018high efficient welding electrodes for welding low-alloy steel structures. Th507e5015suitable for welding key structures for medium carbon steel and 16mn low-alloy steel structures.

Carbon steel welding electrode is suitable to work in all positions with excellent welding technological properties, stable arc less splash, shaped good appearance, easy for removal of slag layer, easy for striking arc and restriking arc. Used for welding common carbon steel structure, suitable for small thin plates and low class low-allow steel.Sutch as 09mn2.

graphite electrode is acting as a conductive body which release heat in the form of arc for heating and melting steel in the furnace.According to the application, it can be divided into regular power(RP), high power(HP) and ultra high power(UHP). Graphite electrode is widely used in EAF, LRF, submerged arc furnace(producing ferroalloy, pure silicon, yellow phosphorus, calcium carbide etc), resistance furnace

1) E6013 stainless steel welding electrode , carborn welding electrode , welding rod E308 2) Sizes: 2.5 - 5.0mm 3) High quality Packing : 5kg/ box, 20kg/ ctn, 1ton/pallet.

Gauging Carbon Rod Generaly used in the operation in welding shop for Gauging operation

Low Carbon Steel Electrode At Royal Welding Wires. Looking for a great option for welding Look no further than our low carbon steel electrodes! These electrodes are made from a high-quality steel that is low in carbon, meaning it is less likely to cause problems.

Buy Carbon Steel Electrodes At Royal Welding Wire. Looking for high quality carbon steel electrodes Look no further than Welders Supply Shop! We offer a wide variety of carbon steel electrodes, all of which are made from the highest quality materials.

Carbon Synthetic Pyrolytic Artificial Flexible Graphite Sheet in Roll Description of Carbon Synthetic Pyrolytic Artificial Flexible Graphite Sheet in Roll 1. Size: 300mm*50m ,60mm*50m 2. Standard: TSM 500 TSM 1500 TSM1500-D 3. Certification: ISO9001, SGS, CTI, ROHS Place of Origin:Guangdong, China (Mainland) Brand Name:laimeisi Model Number:LMS-TSM Type:Flexible Sheet Application:Smart Phones Thickness:0.017-0.4mm Grade:Industrial Grade C Content (%):98%-99% Sample:Free Thermal Conductivity:1500-1800w/mk Density:1.5-2.2g/cm3 Color:Black Use Temperature:-40â??~400â?? UL Flammability Rating:94V Tensile Strength:9~40MPa Material:Flexible Graphite Sheet Size:Customizable Features of Carbon Synthetic Pyrolytic Artificial Flexible Graphite Sheet in Roll 1 ,GSM is made from flake graphite (99.5%),Light weight 2, Ultra-high thermal conductive performance / easy to operate 3,Reliable performance from -40â??to 400â?? 4,Low thermal resistance 5,Offered in thicknesses from 0.05mm~0.5mm 6,Can be adhesive-backed and Insulative adhesion Type , RoHS compliant and UL94V0 flammability rated. Applications of Carbon Synthetic Pyrolytic Artificial Flexible Graphite Sheet in Roll 1. Conductive graphite sheet is a kind of totally new thermal & radiating material, heat conducting evenly along two directions, shielding with heat and component while improving the performance of the consumer electronic products. 2. IC ; CPU; MOS; LED; Heat sink; LCD-TV; Laptop; Communication equipment; 3. Wireless switch; DVD; Hand-held device; Camera/digital camera; Mobile phone. Packaging & Delivery Packaging Details:Follow customer's request Delivery Detail:3 days after payment

FEATURES High Tensile Strength, Crack Proof Joints,Perfect arc striking and re-striking Least spatter and smoke, High Penetration, Shiny and Excellent Surface Finish Easy Slag Removal Sizes 3.2 X 350 mm 4.00 mm X 350 mm 4.00 mm x 450 mm 5.00 mm X 450 mm Chemical composition C% Mn% Si% S% P% 0.09 0.50 0.40 0.03 0.03 Approved By CE/BIS/IBR/BHEL/Cethar Vessels

Hp gratiphit electrode 1.Grade:hp 2.Diameter:100 to 800mm 3.Length: 1000 to 2100mm 4.Nipple:3-4 tpi 5.Density:1.60-1.70g/cm3 6.Compressive strength:10-12mpa 7.Flexural strength:10-12mpa 8.Thermal expansion:2.2. Wooden case

Xinhong carbon advantage: Strictly control of raw material ensures it is from the best origin; Advanced production technology & facilities &experienced workers; Strict quality tracing system to ensure each ge excels buyer needs; Technical assistance & after service are available whenever needed; Sufficient stock in factory to ensure competitive price&fast delivery; Graphite electrodes Graphite electrode is made of petroleum coke, needle coke, and bonding coal pitch. Its production process is: calcining, dosing, mixing, forming, baking and impregnation, graphitization in a high temperature of over 3000c, then precision machining. Graphite electrode is acting as a conductive body which release heat in the form of arc for heating and melting steel in the furnace.According to the application, it can be divided into regular power(rp), high power(hp) and ultra high power(uhp). Graphite electrode is an important conductive material in smelting industry with good electrical conductivity, thermal conductivity and high mechanical strength, good corrosion resistance under high temperature. Graphite electrode is widely used in eaf, lrf, submerged arc furnace(producing ferroalloy, pure silicon, yellow phosphorus, calcium carbide etc), resistance furnace (such as the graphitization furnace, glass melting furnace and silicon carbide furnace etc). Packed in wooden crate or as your requirment.

Carbon Electrode Polishing Machine-China Dalian BeiMeng Technology Co., Ltd. is a high-tech company specializing in the production of automation equipment, providing turn-key projects for carbon processing, automotive, electronics and cold chain industry. The company covers an area of 5000 square meters, with 30 employees and more than 20 sets of various processing equipment. In 2014, we developed the first Carbon Electrode Handling and Cleaning machine, which changed the traditional graphite electrode grinding and cleaning method, and helped carbon processing enterprises to improve work efficiency and reduce labor costs. At present, our electrode cleaning equipment has been used in several domestic leading carbon enterprises, such as Fangda Carbon, Dongfang Carbon, and Wanji Holding group. After 5 years of continuous innovation, we launched a new graphite electrode automatic cleaning production line in 2019. Compared with the original equipment, the new equipment has better stability and processing effect of finished products. Now we have obtained the patent certificate. Products: Carbon Electrode Handling and Cleaning Systems, Anodes/Carbon Butts Cleaner Machine, Carbon Anode cleaning machine, Carbon Anode Polishing Machine, Carbon bar Polishing Machine.