Top manufacturer of cantilevers in China, very good quality, having sold into over 15 countries. With all treatments, solts, welding, ..
Sliding System for heavy gates
Cantilever rack upright are welded by cold-rolled C-type profile, according to the steel structure design theory, this structure make full use of the materialâ??s anti-load capacity, with light weight, strong carrying capacity, low cost characteristics, the pitch on the upright between upright and arms is 50/100mm, so the cantilever rack can be adjusted up and down from this height. Such kind of cantilever rack is widely used in machinery industry and architectural material industry. High effeiency on the storage of timber,pipes,ring form materials and so on.Goods can be carried out by forklift, crane or manual. It can be customized according to your requiremrnts.
Specifications: 1). Size: to order 2). Level: to order 3). Loading Capacity: 100~1000KG/two cantilevers 4). Finished:Powder coated 5). Be fit for: Directly put long products. Notes: 1). This rack can be dismantled and assembled freely by yourself; 2). This rack can be made as per customer's special requirements:size,level,loading capacity,powder coated color etc.
Upright shaft is usually made of H type steel or cold rolling steel or frame, square tube, cold rolling steel or H type steel are used to make arms. Cantilevers are assembled to upright shafts by composite type or bolts & nuts which is also for the fixation between base and uprights. Level height is adjustable. Loading and unloading of goods can be done manually or by forklifts. The height of cantilever racking is usually lower than 2500mm (the height up to 6000mmby using forklifts for loading); length of arm is shorter than 1200mm, and loading capacity is no more than 1200kg per arm. Cantilever racking is mainly used in the Mechanical Manufacturing Industry and markets for building materials. There are three kinds of cantilever racking, light duty, medium duty and heavy duty, each kind of cantilever racking has different loading ability, as well as different material. plastic film as inner package
It could be divided into single side cantilever racking and double side cantilever racking according to the structure. The cantilever racking has specific advantages for the storage of the strip type cargoes, such as tubing, plate and irregular goods, etc. This racking is especially suited to the warehouse with small space and low density after adding the board. It is easy and fast to operate and manage and has an open view. The efficient use of space is more reasonable than other racking.
Cantilever racking-multi-arms racks (fully bolted structural i-beam) The cantilever racking has specific advantages for the storage of the strip type cargoes, such as tubing and plate, etc. According to the carrying capacity, it can be divided into single side cantilever rack and double side cantilever rack according to the structure. Multi-arms rack features: 1) composite structure 2) size and capacity can be fixed by users, allows extra long items to be stored. 3) mainly used for the storage of long, circular or irregular shape goods 4) high quality steel, plastic sprayed in the surface and color optional
Detailed product description: 1) this rack can be divided into a single sided or double sided cantilever rack 2) parts: upright poles, single face cantilever, two face cantilever safety pins, wire footing plates 3) material: high quality steel; plastic sprayed in the surface and color optional 43) max single arm load capacity: 150-650kg 5) cantilever racks can store nearly any type of load. They are especially useful for storing long, bulky, or oddly-shaped loads. 6) with no front column in the way, cantilever racks are faster to load and unload, lowering handling time and costs. 7) loads may be placed anywhere along the entire length of a row on a cantilever rack. 8) the lack of a front column saves horizontal space normally lost to rack structure. Handling clearance is also more abundant. 9) both reduced handling times and increased space utilization make cantilever racks more cost-efficient. Additionally, cantilever racks become more economical as load length increases, while standard pallet racks increase in costs. Film
The ideal solution to store long and awkward oversized goods is cantilever racking. It is perfect for the storage of packs of timber, steel bars, tubes, long length goods. It is available in both single sided and double sided configurations. The double sided rack provides maximum strorage capacity on a single central column while the single sided rack is designed to fit flush against a wall.
Cantilever pumps
Cantilever rack Suitable for storage of long, plate type or ring type materials; cantilever extended forward features structural stability, good load bearing capacity, easy management and wide view; Such racks can be classified to light, medium and heavy racks according to different load bearing capacity, and to single face and 2-face cantilever according to storage faces. Upright: 80x65x2.0mm, 90x67x2.0mm, 100x67x2.0mm, 120x95x2.5mm We can supply according to customerfs requirement.
Combined shelves. Customized according to customers' requirements, mainly suitable for storage of long material, ring material and irregular goods. Advantages of cantilever rack 1. single-sided or double-sided, stable structure, good load capacity and high space utilization rate. 2. H-shaped steel or cold-rolled steel. 3. inserted or bolted connecting mode, cold-rolled steel or H-shaped steel base. 4. adjustable column between the clapboard.
Combined shelves. Customized according to customersâ?? requirements, mainly suitable for storage of long material, ring material and irregular goods. 1. single-sided or double-sided, stable structure, good load capacity and high space utilization rate. 2. H-shaped steel or cold-rolled steel. 3. inserted or bolted connecting mode, cold-rolled steel or H-shaped steel base. 4. adjustable column between the clapboard. If you want to learn more about products or information please kindly read our website
As one of the best Cantilever Rack Manufacturers in Noida, India, we promise that our offered Cantilever Rack will give you value for money. Call Now.
It is an electric or hydraulic lifting device. The platform can be equipped with a fence and ramps. There are two types of structures - with one and double masts. It is installed on the floor, concrete ramp. Can have the desired number of stops at a specified height. The set includes a control panel Overhead or in-hole installation. Safety margin +30%
This racking style is designed for use with items of varying lengths, shapes and sizes. When your products cant be stored on standard pallets, a cantilever rack allows you to carry a wide range of stock without needing multiple racking systems to accommodate them. Cantilever systems can reach great heights, giving you high storage density per metre on the ground and making the best use of available space.
Cantilever of railway part Material: Steel 45 Weight: 1.3kg,1.5kg Manufacture process: Forging Description:The railway part of it must have sufficient strength and stability, and ensure the train in accordance with the relevant provisions of the highest speed, safe, smooth and continuous running.
Material: Steel 45 Weight: 1.3kg,1.5kg Manufacture process: Forging Description:The railway part of it must have sufficient strength and stability, and ensure the train in accordance with the relevant provisions of the highest speed, safe, smooth and continuous running.
1. Application For insulated core wire single twisting purpose, available for back twisting and filling/wrapping online. 2.Technical Parameters: 2.1. Take-up spool size: flange diam�?630mm. 2.2. Pay-off spool size: flange diam�?400-500mm. 2.3. Pay-off stand: 6 head(2*2+1*2). 2.4. Inlet wire diam: 0.6-3.0mm. 2.5. Twisted diam: Max 12mm. 2.6. Laying pitch: 20-300mm set free,tolerance+/- 0.5mm,digital touch screen input. 2.7. Revolutions: 0-1000RPM. 2.8. Driving power: Main motor:7.5 KW TECO AC motor,control by 7.5 KW Emerson Converter. Take-up motor:3.7KW TECO motor,control by 3.7KW Emerson Converter. Traverse motor: horizontal type 400W reducer motor(1:10) Hydraulic lifting motor: 750W motor 2.9. Braking system: pneumatic type,part imported from Japan. 2.10. Traversing way: double role round traversing on processing. 2.11. Twisting direction: S/Z set freely.
Item Name: industrial cantielever racking Company Name : Nanjing ouman storage equipment co.,ltd cantilever racking L2000*D600*H2000mm single/double sides cantilever racking 100-1000kg/arm
