AVP-16(D,S) H/P 20K, Pneumatic +Type of body: Wafer +Flange: ANSI 300 +Face to face dimension: ISO 5752 +Top flange dimension: Bolt hole ISO 5211 +Stem dimension : Square drive to ISO 5211 + Double eccentric (offset) disc +Material : - Body : Ductile iron, Cast steel - Stainless steel (304, 316) - Disc : Stainless steel (304, 316 & 316L) - Stem : Stainless steel (304, 316, 316L & 630) - Seat ring : PTFE, RTFE, Metal + Vacuum equipment (up to 10-5 Torr) + Max. Temperature : - PTFE (-60 C to +160 C) - RTFE (-60 C to +200 C) - Metal (-120 C to +450 C) +OPTION - Lugged body - Long bonnet
AV-15,16 H/P Wafer 20K + Type of body: Wafer + Flange : ANSI 300 + Material : - Body : Ductile iron, Cast steel - Stainless steel (304, 316) - Disc : Stainless steel (304, 316 & 316L) - Stem : Stainless steel (304, 316, 316L & 630) - Seat ring : EPDM, PTFE, RTFE, Metal + Face to face dimension : - ISO 5752, API 609, MSS SP-68, DIN 3203 / K1 (Short) + Top flange dimension : Bolt hole to ISO 5211 + Stem dimension : Square drive to ISO 5211 + Double eccentric (offset) disc + Vacuum equipment (up to 10-5 Torr) + Max.Temperature : - EPDM : -20 c to +120 c - PTFE : -60 c to +160 c - RTFE : -60 to +200 c - Metal : -120 to +450 c + OPTION - Lugged body - Long bonnet
AVE-16 H/P 20K, Electric + Type of body: Wafer + Flange: ANSI 300 + Face to face dimension: ISO 5752 + Top flange dimension: Bolt hole ISO 5211 +Stem dimension : Square drive to ISO 5211 + Double eccentric (offset) disc + Material : - Body : Ductile iron, Cast steel - Stainless steel (304, 316) - Disc : Stainless steel (304, 316 & 316L) - Stem : Stainless steel (304, 316, 316L & 630) - Seat ring : PTFE, RTFE, Metal + Vacuum equipment (up to 10-5 Torr) + Max. Temperature : - PTFE (-60 c to +160 c) - RTFE (-60 c to +200 c) - Metal (-120 c to +450 c) +OPTION - Lugged body - Long bonnet - EXA : Explosionproof Eexd�BT4 (RE-010~120) - WTA : Watertight Enclosure (IP68) - PCU : Proportional Control Unit (in/out, 4~20mA, 0-10VDC) - PIU : Potentiometer (1K~10KΩ) - CPT : Current Position Transmitter (output 4~20mA) - DCM : 24VDC Motor (RE-006~120)
Factory Automatic Hot Eye Onion peeling process machine,from small capacity to big capacity Onion peeling process: the onion is manually fed into the hopper --- the conveyor belt automatically feeds the onion into the peeling box for peeling --- after peeling, the onion goes into the peeling roller. Under the action of high-pressure air at the side, the first and second layers of the onion are peeled off and sent out to complete the whole processing process. Features: 1. Advanced technology, reasonable mechanism, beautiful appearance, safe and reliable use, all stainless steel. 2. Automatic peeling without damage. 3. The depth of peeling is even. 4. The feeding belt is used for automatic feeding, which is simple in design and convenient in use. 5. Less peeling, high recovery rate of finished products, and over 98% of finished products. 6. Mechanical processing eliminates the hidden danger of manual processing of infectious diseases and unsanitary products. Parameters 1.process arrange diameter of round shape onion 30-150mm. 2.capacity 1000-1500kg/h 3.Power 3kw 4.Voltage 380V 5.Air Compressor :flow 1.5m2/min, pressure 0.7MPa ,power 11kw 6.Machine size 1.5*1.3*1.4m 7.Weight 420kg Start working flowing: 1.Fill onion in the loading box 2.Start the pneumatic valve switch 3.Start the power-supply switch 4.According to onion drying or fresh to adjust loading speed button/air pressure ,in order to ensure the clean degree of removing onion skin 5.When finished adjusting ,The equipment operates normally and automatically.
Couplings, gearbox, valves, pumps, bearings, conveyor systems, pipes & fittings, automation drives electrical items, rtd, cables, switchgears, transformers, measuring instruments, drilling machines. ball valves, gate valves, globe valves, butterfly valves, diaphragm valves, waffle valves, sluice valves, hydraulic valves, pneumatic valves, solenoid valves, bellow seal valves, check valves in stainless steel, ss 304, ss 316, brass, m.s, cast iron, cast steel, pvc, nylon, teflon, ceramic lining valves. fittings: flanges, elbows, tee, couplers, nipples. bearings, v belts, couplings: gear couplings, pin bush couplings,pulleys.Export, clearance, door delivery, import, automations, maintenance, retro fitting, installations
AVP-14(D,S) AL, Pneumatic +Type of body: Wafer +Flange: JIS 10K +Face to face dimension: ISO 5752 +Top flange dimension: Bolt hole ISO 5211 +Max. Pressure: 10 kg/cm2 (0.98MPa) + Material : - Body : Aluminum Alloy Diecast (ADC-12) - Disc : Stainless Steel (304, 316) - Stem : Stainless Steel (304, 316) - Seat : EPDM, NBR +Max. Temperature : - EPDM (-20 c to +120 c) - NBR (-10 c to +80 c) + Test : - Body = 15 kg/cm2 (1.47MPa) - Seat = 11 kg/cm2 (1.08MPa) + Light weight & compact +OPTION - Long bonnet
Ball Valves Screwed / Socket Weld / Butt-weld / Flanged Ends : Ball valves are designed and manufactured to provide maximum service life and dependability. Three Piece and Two Piece design Ball Valves ensure efficiency, reliability and economy. Pneumatic Operated Ball Valves and Electrical Actuated Ball Valves are maintenance friendly and suitable for on-line maintenance . Butterfly Valves High Performance Butterfly Valve 150LB/300LB/600LB ,wafer type with integrally moulded elastomeric body sleeve are designed for longer life and trouble free performance. Gate Valves ATSIPL distributes a full line of Gate Valves, including Wedge Gate Valves, Knife Gate Valves, Lined Gate Valves, Resilient Seated Gate Valves and more. Gate Valves are available from 1/2â?³ through 24â?³ and larger in various material options.
We are direct manufacturer and exporter of Crud and Refined Rapeseed oil, olive oil, sunflower oil, soybeans oil, jatropha oil, canola oil, Palm oil, virgin coconut oil, Corn oil,Edible oil, used vegetable cooking oil.We need reputable buyers ready to buy and enter into long term yearly, monthly or weekly contracts with our company. We will highly welcome buyers who are willing to travel or send representatives. We would like our first time clients to visit us for viewing, purchase, business discussion, shipment and others, we are happy to welcome you in any of our branches. Contact us to start doing business with us. Sunflower Oil,Corn oil,Soybean Oil,Olive oil,Jatropha oil,Sesame Oil,Palm oil,Coconut oil,Canola oil,Rapeseed Oil,Edible oil,Peanut oil. JATROPHA OIL SPECIFICATION Free fatty acids 3, 5% Max M.I.U(Moisture and Impurities) 0.1 % max Saponification value: 18185-1955-195 Iodine value: 120 Titre C (melting point) 13.75 C Specific Gravity @ 25â??C 0.915 Density (kg/m3) 920 Flashpoint by P.-M. (Degree C) 220 Calorific Value (kj/kg) 36, 000 Kinematic Viscosity (40 deg.C) (mm2/s) Carbon Residue (mass-%) 0.4 Sulphur Content (mg/kg) 16 Contamination (mg/kg) 24 Acid Value (mg KOH)/g) 7.0 Oxidation Stability (110 deg.C)(h) 5.0 (min) Phosphorus Content (mg/kg) 15 Ash Content (mass %) 0.01
AVE-15 H/P 10K, Electric + Type of body: Wafer + Flange: JIS 10K/20K, ANSI 150LBS + Face to face dimension: ISO 5752 + Top flange dimension: Bolt hole ISO 5211 + Stem dimension: Square drive to ISO 5211 + Double eccentric (offset) disc + Material : - Body : Ductile iron, Cast steel - Stainless steel (304, 316) - Disc : Stainless steel (304, 316 & 316L) - Stem : Stainless steel (304, 316, 316L & 630) - Seat ring : PTFE, RTFE, Metal + Vacuum equipment (up to 10-5 Torr) + Max. Temperature : - PTFE (-60 c to +160 c ) - RTFE (-60 c to +200 c ) - Metal (-120 c to +450 c ) +OPTION - Lugged body - Long bonnet - EXA : Explosionproof Eexd�BT4 (RE-010~060) - WTA : Watertight Enclosure (IP68) - PCU : Proportional Control Unit (in/out, 4~20mA, 0-10VDC) - PIU : Potentiometer (1K~10KΩ) - CPT : Current Position Transmitter (output 4~20mA) - DCM : 24VDC Motor (RE-006~060)
We Supply Used cooking oil for Bio diesel and others as below : USED COOKING OIL SPECIFICATION Free fatty acids 3 % Max M.I.U(Moisture and Impurities) 0.1 % max Saponification value: 18185-1955-195 Iodine value: 120 Titre C (melting point) 13.75 'C Specific Gravity @ 25 C 0.915 Density (kg/m3) 920 Flashpoint by P.-M. (Degree C) 220 Calorific Value (kj/kg) 36, 000 Kinematic Viscosity (40 deg.C) (mm2/s) Carbon Residue (mass-%) 0.4 Sulphur Content (mg/kg) 16 Contamination (mg/kg) 24 Acid Value (mg KOH)/g) 7.0 Oxidation Stability (110 deg.C)(h) 5.0 (min) Phosphorus Content (mg/kg) 15 Ash Content (mass %) 0.01 Packaging & delivery TRANSPERENT PET BOTTLES * 1L, 3 L,5 Liters and in bulk PET Transparent Bottle (With Handle). JERRYCANS * 5 L, 10 L, 20 L, 25 L and 220 Liters Jerry can. METAL TIN * 16 L, 14 kg (with or without carton), 15 L / 15 kg, 16 kg (with or without carton 17 L / 17 kg, 18 L / 18 kg, 20L Metal Tin with Bung Hole (Round or Square) and 211 Liters Metal Drum. FLEXI TANK 20 MT Flexi Tank.
Pneumatic butterfly valves conbined a piston within a cylinder and our various connecting butterfly valves. They are not only developed to single effect ( air/ spring ) but also double action ( air/ air ) in case of the actuator euqip with professional control box which is designed with various options such as proximity type, micro swith type and electrovalve 1 up to 3 pcs by requested. Each per ploybag, 100pcs per carton box, then into plywood box
The pneumatic regulating butterfly valve has the advantages of simple and compact structure, convenient processing, easy to manufacture large diameter, self-cleaning action, small drag coefficient and large circulation capacity. It is additionally equipped with a valve positioner, which can be controlled by input control signals (4-20mADC) and a gas source of 0.4-0.7MPa. Pneumatically regulated butterfly valves are suitable for the regulation of fluids in suspended particles and in concentrated, turbid slurry fluids. Clean media can be replaced with a valve plate with a soft seal (rubber ring, PTFE ring) to reduce leakage (up to zero leakage). The high-temperature and high-pressure working conditions can be selected by a three-eccentric hard sealing valve body. Pneumatically regulated butterfly valves are the best means of regulating flow and shutting off fluids in automated control systems. Therefore, the pneumatic regulating butterfly valve is widely applied to the pipeline of corrosive medium such as metallurgy, electric power, petroleum, chemical, air, gas, combustible gas and water supply and drainage with medium temperature â?¤550°C.
Pneumatic Butterfly Valve (Wafer) Nominal Diameter: DN40-600 Pressure Range: 0-16bar Medium Temperature: -20C~+80C Valve Body Material: Gray cast iron, ductile cast iron, cast steel, stainless steel Sealing Material: NBR, EPDM, FPM Valve Disc Material: Ductile cast iron, cast steel, stainless steel, nickel alloy Feature: Double bubble and zero leakage, double (single) stem without pin Applicable Medium: Drinking water, sewage, high-purity water, sea water, air, etc Operating Pressure: 3-8bar PC to carton box, carton box to plywood case
We at Airatrex take pride in offering cutting-edge gearbox solutions that meet the diverse needs of industries worldwide. Our gearboxes are engineered for precision, durability, and optimal performance, ensuring seamless integration into various applications. Explore the world of power transmission with our exceptional gearbox solutions.
We supply all types of industrial pressure transmitter
We are leading Material Handling Solutions Providers Engaged in manufacturing and supply of Industrial Rubber Conveyor Belts, PVC conveyor belts and Magnetic Separator Belts. Renowned for product superiority and innovation. We offer World Class guaranteed ISO 9001:2008 certified products with Fastest Delivery period at lowest prices. Our products are suitable and meeting the requirement for various industries regularly like Steel plants, sponge iron -Power plants, Stone Crushers, Solvent plants, Pulp and Paper industries, Mines, Fertilizers and Chemical plants, Sugar Industry, Coal Plant, Coal Handling Plants, Smelters and other industries.
Conveyor Idlers Tough Belt Training Idlers Toughing Idlers Carrying Idlers Self Allign Carrying Idlers Self Allign Return Idlers Impact Idlers Tough Belt Rubber Cushion Idlers Return Idlers Return Impact Idlers Conveyor Drum Pulleys Rubber Lagged Pulleys Head Pulleys Snub Pulleys Wing Pulleys
Simple / easy maintenance, No down time, No loss of production Provides torsional vibration isolation & damping No metal to metal contact, hence electrically insulated Low initial, operation & replacement cost No lubrication Long life
We provide our fasteners for Light to Heavy Enginnering Industries, Electrical & Electronics, Telecom, Automobiles, Fertilizers & Chemicals, Hydrualics & Pneumatics, Aeronautics, Pumps & Valves, Air - Condition & Refridgeration, Cement, Sugar, Machine Tools, Packaging, Textile, Pharmaceutical, Plastic Injection Moulding Machineries, etc. industries. Our wide range of Standard and Non - Standard Products offers a reliable source for various industrial requirements with World Class Quality.
The range caters for almost all possible Medias, working Pressures up to 700 Kg/Cm2 and Temperatures up to 800ºC.
