BITUMEN 60 - 70 & ALL KIND "***Special offer*** Russian origin----- DELIVERY TERM: CIF " MOQ: 40,000 MT/Month ( 1-year Contract )----- PACKING: Bulk, Jumbo, Barrel, Polye bag----- "Payment Term: DLC/MT700 --- SBLC/MT760 --- 5% Guarantee WORKING PROCEDURE CIF/TTO --- 10% Deposit in Escrow Agent WORKING PROCEDURE CIF--- Any World Safe----- Without any payment in advance"
Bitumen a black viscous mixture of hydrocarbons obtained naturally or as a residue from petroleum distillation. It is used for road surfacing and roofing. Bitumen is a mixture of Organic Liquids that are highly Viscous, Black, Sticky, Entirely Soluble in Carbon Disulfide, and composed primarily of highly condensed Polycyclic Aromatic Hydrocarbons. Naturally occurring or crude bitumen is a sticky, tar-like form of petroleum which is so thick and heavy that it must be heated or diluted before it will flow. At room temperature, it is much like cold molasses. Refined Bitumen is the residual (bottom) fraction obtained by fractional distillation of crude oil. It is the heaviest fraction and the one with the highest boiling point, boiling at 525 C (977 F). Petroalliance are involved in import and the supply and trade of Bitumen Oil. This oil is a dark and viscous liquid which is sticky in texture. It is widely used in road construction, waterproofing, paints, enamels etc. It is available to clients in different types of settings at highly affordable prices. It is widely acclaimed amongst our client base for its supreme quality. Uses of Bitumens Bitumen is primarily used for construction and paving of roads. Its other uses are for Bituminous Waterproofing Products, including the use of bitumen in the production of roofing felt and for sealing flat roofs.
Bitumen penetration grade 60/70 is semi-hard penetration grade bitumen using as paving grade bitumen suitable for road construction and repair conjointly for the production of asphalt pavements with below technical specifications. This grade of bitumen is mainly used in the manufacture of hot combine asphalt for bases and wearing courses. Bitumen 60/70 is the most used bitumen grade and basic material for all alternative bituminous products. Bitumen Penetration Grade 60/70 is mainly used in the manufacture of hot mix asphalt for bases and wearing courses. Penetration Grade Bitumen supplied by RAHA GROUP is petroleum grade bitumen, manufactured from fractional / vacuum distillation of crude oil. The Bitumen supplied by RAHA GROUP is produced from vacuum residue (short residue) feedstock. RAHA Penetration Grade bitumens are specified by the penetration and softening point test. The designation is by penetration range only. The penetration grade bitumens have a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature/ viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability and application temperatures of bitumen.
Penetration Bitumen 60/70 serves as a vital component in road construction projects. It is specifically engineered for optimal performance in such applications. It is imperative to adhere to the recommended usage guidelines and consult with the supplier before considering alternative applications. The properties and specifications of Bitumen 60/70 are rigorously tested to ensure compliance with industry standards and project requirements.
Technical Data Sheet Bitumen 60/70 Paving Grade Bitumen Description Bitumen 60/70 has the highest-boiling point, heaviest and most polar fraction from the vacuum distillation of crude oil. Bitumen 60 70 is composed of asphaltene and maltene. The heavy insoluble asphaltene molecules give bitumen 60/70 its body and softening point while the maltenes are oily and make asphalt flexible. Asphalting molecules are soluble in aromatic solvents like toluene but insoluble in heptane. The maltenes are heptane-soluble molecules and less aromatic. Applications Bitumen 60/70 is a high-quality penetration grade bitumen used in road construction and other similar applications. Bitumen penetration grade 60/70 is semi hard penetration grade bitumen using as paving grade bitumen suitable for road construction and repair also for the production of asphalt pavements with below technical specification. This grade of bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses. Bitumen 60/70 is most used bitumen grade and basic material for all other bituminous products. Typical Specification ITEM SPECIFICATION TEST METHOD SPECIFIC GRAVITY @ 25/25 oC 1.01/1.06 D-70 PENETRATION @ 25 oC 60/70 D-5 SOFTENING POINT oC 49/56 D-36 DUCTILITY @ 25 oC SMC 100 MIN D-13 LOSS ON HEATING %WT 0.2 MAX D-6 DROP IN PENETRATION AFTER HEATING % 20 MAX D-6 & D-5 FLASH POINT oC 250 MIN D-92 SOLUBILITY IN CS2 %WT 99.5 MIN D-4 ORGANIC MATER INSOLUBLE IN CS 0.2 MAX D-4 SPOT TEST NEGATIVE *A.A.S.H.O.T 102 Packing: Bulk shipment, 150kgs, 180kgs, 200kgs new steel drum. 25kgs, 50kgs, 300kgs, 500kgs, 1000kgs Polybag.
Asphalt bitumen is mainly used as basic construction materials, raw materials and fuels, and its application scope is such as transportation (road, railway, aviation, etc.), construction industry, agriculture, water conservancy engineering, industry (mining industry, manufacturing industry), civil and other departments.
Bitumen produced by refineries in the Russian Federation, Kazakhstan, and elsewhere, is available for sale FOB or CIF at the best prices. Prices are negotiable for serious big-volume buyers. Buyer's mandate welcome. 30/40 FOB $300 Gross / $290 Net per MT - CIF $330 Gross / $320 Net per MT 40/50 FOB $300 Gross / $290 Net per MT - CIF $330 Gross / $320 Net per MT 50/70 FOB $300 Gross / $290 Net per MT - CIF $330 Gross / $320 Net per MT 60/70 FOB $300 Gross / $290 Net per MT - CIF $330 Gross / $320 Net per MT 80/100 FOB $300 Gross / $290 Net per MT - CIF $330 Gross / $320 Net per MT 85/100 FOB $300 Gross / $290 Net per MT - CIF $330 Gross / $320 Net per MT 100/120 FOB $300 Gross / $290 Net per MT - CIF $330 Gross / $320 Net per MT
BITUMEN GRADE60/70 PRICE CIF ASWP: GROSS $390/NET $380 TERMS OF NEGOTIATION ORIGIN: FEDERAL REPUBLIC OF NIGERIA INCOTERMS: CIF/FOB/TTO LOADING TERMINAL: GULF OF GUINEA / FORCADOS PAYMENT TERMS: SBLC-MT760, MT103 PERFORMANCE BOND: 2% PB CONTRACT TERM: 12 MONTHS MINIMUM (WITH ROLLS AND EXTENSIONS) INSPECTION: SGS, CIQ OR SIMILAR COMMISSION: STRUCTURED NCNDA/IMFPA FOB ROTTERDAM TANK TAKEOVER (SELLER TANK EXTENSION) 1. Buyer sends ICPO in line with seller working procedures 2. Seller issues Commercial Invoice (C.I.), Buyer Signs within 24 hours and returns to Seller Within its validity. 3. Upon receipt and review of the signed C.I., Seller sends to the buyer detailed information of Tank Storage facility where the product is stored for buyer to contact and extend the tank for at least a minimum of three (3) days. 4. Upon confirmation of Buyer's tank tension from seller's tank farm, Seller submits to by an Unconditional Dip Test Authorization (UDTA) along with the below full POP documents: - SGS report, Pre- Injection Report, Commitment Letter to Supply Authorization to sell & collect. 5. Buyer appoints their testing teams SGS or Equivalent to vessel. dip test in seller tank before injection to the buyer's vessel or conduct test upon injection completion into the buyer's vessel to ascertain the Quality and Quantity injected to the vessel. 6. Upon successful completion into buyers tanker, Seller issues payment invoice for Buyer to pay for the product value 7. Seller issues Tittle ownership documents to buyer upon confirmation of buyer payment. NCNDA/IMFPA sign and seal by all intermediaries connected in the transaction. 8. Seller within 24 hours upon receipt of the buyer's payment pays commission to all intermediaries involved in the transaction.
Raw Material : PP or BOPP Raw Material : Virgin material or recycled Color : All kinds of colors or as the customers requirement Printing : One side or both sides in multi-colors with film or non film Width : From 260-1300mm Length : As the customer’s requirement Weave : 10x10,11x11,12x12,14x14 or be customized Denier : 450D to 1500D Weights/m : 50g to 200g Surface Dealing : Anti-slip or plain Top : Heat cut or hemmed Bottom : Single folded, double folded, single stitch, double stitch Liner : coated or with liner bag for moisture proof Usage : rice, flour, sugar, salt, animal feed, asbestos, fertilizer, sand, cement and so on. Packing : 500pcs(bale),1000pcs(bale) or can be customized Minimum Order 20 feet container Delivery Time : 10-30days after place an order or negotiation Trade Term : CIF, CNF, FOB QINGDAO Special Requirements : As the customers requirements Treat : UV treated or as the customers requirement Loading qty. : 12 Tons/20’container, 23tons/40’hq. We can make all kinds of size
Raw Material: PP or BOPP Raw Material: Virgin material or recycled Color: All kinds of colors or as the customers' requirement Printing: One side or both sides in multi-colors with film or non film Width: From 260-1300mm Length: As the customer’s requirement Weave: 10x10,11x11,12x12,14x14,12×11or be customized Denier: 450D to 1500D Weights/m²: 50g to 200g Surface Dealing: Anti-slip or plain Top: Heat cut or hemmed Bottom: Single folded, double folded, single stitch, double stitch Liner: coated or with liner bag for moisture proof Usage: rice, flour, sugar, salt, animal feed, asbestos, fertilizer, sand, cement and so on. Packing: 500pcs(bale),1000pcs(bale) or can be customized Minimum Order20 feet container Delivery Time: 10-30days after place an order or negotiation Trade Term: CIF,CNF,FOB QINGDAO Special Requirements: As the customers' requirements Treat: UV treated or as the customers' requirement Loading qty.:12tons/20’container, 23tons/40’hq. we can make all kinds of size
1.We use imported base paper from Germany. For solid color, base paper most 80 to 120GSM. For wood base paper is between 70-85 gsm 2. High quality water-base ink- Available over 200 shades in Solid colors and wood grains 3. With clear texture ,high Fidelity meeting international standards. 4. With smooth surface coating 5. Germproof, mould proof, antistatic and wear-resistance. 6. Green environmental protection and Odorlessness which Conforms to the GB18584-2001 standard requirement 7. Can be used for the hot press molding craft, the production efficiency is high. 8. Melamine paper takes shape easily, is widely used for the panel furniture and the decorative yarn. Product Specification: Width: 1230-1260mm or 1300-1800mm Length: 500-1000m For storing: Put it in room to a cool and dry place keep the temperature 20-25°C in room. The best humidity is: 50-60% We can also give you complete decorative solution with Matching Melamine Edge Banding, PU Paper. If you need just need Melamine/prelaminated boards either in MDF / Particle board we can also do so
Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)
A product Bitumen 60/70 is available In any quantity Required documents before completing the transaction : trade license
Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor
The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.
Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details