Bds333 Series Pocket Scale Suppliers and Manufacturers

Mill scale, is formed on the outer surfaces of plates, sheets or profiles when they are being produced by rolling hot iron or steel billets in rolling or steel mills. It looks like a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in color. Being produced during the reheating, conditioning and hot rolling operation for the production of steel articles, the mill scale initially adheres to the steel surface and protects it from atmospheric corrosion, provided no break occurs in this coating. From the chemical and physical analysis performed on the scrap, and according to the european environmental rules, the material has been classified as a special non dangerous waste, listed in green list In particular the mill scale can be classified as follows: Einecs (european commission no.): 266-007-8 Waste code: 10 02 10 Basel code: b 12 30 Hs code: 2619.00

We are glad to propose 500 MT of stain less steel mill scale. Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products. At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel. The recovery ratio after melting in furnace for the most valuable alloy elements is: - Ni: 3.5 - 4.5% - Cr: 6-8% From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows: Waste code: 10 02 10 The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers. Chemical analysis of the material is available on request.

Baby Weighing Scale Digital Body Weight Upto 30Kg Baby Tray Specifications: Multi-Function digital scale with an accuracy of 10g, suitable for Baby and child Simple Use: Turn on the scale and gently place baby on the platform. Weight is displayed and will flash to confirm the measurement Quick Readings: Gives a babyâ??s weight reading in a matter of seconds. Weight can be displayed in Kilograms (kg), and Pounds (lb) Helpful Features: Easy to use tare option makes it possible to get an accurate reading when a blanket placed on the scale. Customer Service: Smart Weigh is dedicated to 100% customer satisfaction. Mowell Digital Baby Weighing Scale is an ergonomic device which has been engineered for both comfort and measurement accuracy. The tray is screw tight to the machine and made of soft plastic for hygiene and safety of the baby. Monitoring your child Health This digital baby scale is the perfect health product for parents concerned about their babyâ??s development. Young children are constantly growing so itâ??s important to monitor healthy changes. Keep track of your babyâ??s weight to make sure your baby is getting the proper nutrition and is being fed the correct amount. The Smart Weigh Digital Baby Scale is beautifully designed to ensure the comfort of your baby. The smooth platform is curved to comfortably cradle your baby, while you check for healthy readings. Scale Operation Place the scale on a flat, level surface. Press the unit button to select the desired unit of measure. Gently place the baby on the curved platform. The display will stabilize and flash. The scale will then display your baby's weigh on the backlit LCD screen.

Specifications: Capacity 10 Kg x 50 g. ABS Plastic Body with Steel Pan. Accurate & Reliable. Wide View dial with moving pointer. Easily removable pan with sliding mechanism. Baby weighing scale are an important instrument in any hospital's toolbox. Consistent and reliable baby weight and growth measurement are a fundamental part of monitoring a new-bornâ??s safe continued development.

Specifications: Capacity 10 Kg x 50 g. ABS Plastic Body with Steel Pan. Accurate & Reliable. Wide View dial with moving pointer. Easily removable pan with sliding mechanism Baby weighing scale are an important instrument in any hospitals toolbox. Consistent and reliable baby weight and growth measurement are a fundamental part of monitoring a new-born's safe continued development

Specifications: Multi-Function digital scale with an accuracy of 10g, suitable for Baby and child Turn on the scale and gently place baby on the platform. Weight is displayed and will flash to confirm the measurement Gives a baby's weight reading in a matter of seconds. Weight can be displayed in Kilograms (kg), and Pounds (lb) Easy to use tare option makes it possible to get an accurate reading when a blanket placed on the scale.It comes with battery and charger as well. Smart Weigh is dedicated to 100% customer satisfaction. Mowell Digital Baby Weighing Scale (TS-500) charger with Adaptor is an ergonomic device which has been engineered for both comfort and measurement accuracy. The tray is screw tight to the machine and made of soft plastic for hygiene and safety of the baby. Monitoring Your Child's Health This digital baby scale is the perfect health product for parents concerned about their baby's development. Young children are constantly growing so it's important to monitor healthy changes. Keep track of your baby's weight to make sure your baby is getting the proper nutrition and is being fed the correct amount. The Smart Weigh Digital Baby Scale is beautifully designed to ensure the comfort of your baby. The smooth platform is curved to comfortably cradle your baby, while you check for healthy readings. Scale Operation Place the scale on a flat, level surface. Press the unit button to select the desired unit of measure. Gently place the baby on the curved platform. The display will stabilize and flash. The scale will then display your baby's weigh on the back-lit LCD screen.

We are proposing about 1000 1200 Mt/ton monthly of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag : 1. >85% Fe Average 600mm Max Fraction 2. >78% Fe Average 20-300mm Fraction The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact

Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details

We are proposing about 2000tons of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag - European Code: 19.12.01 - Basel Code: B1010 - HS Code: 2619.0020 - Quantity: 2000 tons currently available - Monthly quantity: 500-1000 tons depending on production - Size: 350 1200 mm - Fe content: from 77 to 86% - C content: above 2,5-3% - Bulk density: 2,8-3,4 tons/m3 - Loading type: loose in 20 (26-27 tons on average) The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact us

Desulphurisation Slag is an iron slag derived from the desulphurisation skimming process. This material is an iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si), but has a stable chemistry with 75 -80% chemistry. The level of Fe% in the slag has been estimated by water displacement test. This material con offer competitive advantages respect other metal scraps: Price; Stable Chemistry; The material can be loaded loose in 20 heavy duty container. For further details feel free to contact us.

The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.

The Tire derived Steel or Tire Wire Scrap is a light melting scrap obtained during the shredding and granulation process of used tires. Generally 10% - 20% of the weight of an old passenger car tyre usually consists of steel. An average shredding plant produces about 100-200 MT of steel tyre wire and its quality can vary according to technology, storing and management systems adopted by the producing plants. We can provide tire wire scrap that still contains up to 20% rubber/fiber. This percentage is detected by manual separation test. The material can be loaded loose in 40 HC container. For further details, please feel free to contact us.

Plate Iron Scrap is a material that a visual inspection appears of regular shape. This by-product is formed after slag processing in electrometallurgical furnaces. Its chemical composition is homogeneous and stable with about Fe 90% and P around 1.4%, S 0.8% and C 1.4%. The max weight of each pieces is up to 1 ton. The material can be loaded loose in 20 heavy duty container. For further details feel free to contact us.

The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.

This Cast Iron slag is a by-product derived from the production of thermal insulating products. The byproduct is a ferrous slag which can be utilised in an electric arc furnace to produce crude steel. Physical Description On visual inspection, it appears to be made up of irregular shapes. Dimension: 500mm -800mm Chemical Composition Its chemical composition is homogeneous and stable with Fe contents in the range of 90 +/- 5% and P contents < 0.6% S around 0.15% and C% around 3.5%. Packing: Loose in container Loading: in 20 Container For further information, please feel free to contact us.

We offer 200 tons per month of tire wire scrap from combustion of used tires. Material has no rubber left. Tire wire is loaded loose in 20' containers (28 tons each).