Gate valves(ball screw operation) The ball-screw operation gate valve was developed for large-bore applications, to provide manual operation at full working pressure with remakably low opening torque.The design eliminates the need for gear-type torque multipliers, and results in quicker, safer operations. The ball-screw operation gate valve shares the basic features of the "ls"series:a slab gate, patented seat seal, non-elastomeric stem seals, and metal-to-metal sealing.However, the ball-screw operation gate valve has a lower balancing stem and unique ball screw mechanism Size:3-1/16", 4-1/16", 5-1/8", 7-1/16" Wp:10, 000psi, 15, 000psi Temperature:l u, pu Mat's:aa-ff psl:1-4 pr:1-2 Honorary certificate Our products have been iso9001 certified and attained api 6a, 6d, api 7, 7k, and api 16a&16c approvals of american pertroleum insitute.All products are fully designed and manufactured in accordance with api, ansi, gb(national standards)and sy(industry standards)standards.
Gate valves(ball screw operation) The ball-screw operation gate valve was developed for large-bore applications, to provide manual operation at full working pressure with remakably low opening torque.The design eliminates the need for gear-type torque multipliers, and results in quicker, safer operations. The ball-screw operation gate valve shares the basic features of the "ls"series:a slab gate, patented seat seal, non-elastomeric stem seals, and metal-to-metal sealing.However, the ball-screw operation gate valve has a lower balancing stem and unique ball screw mechanism Size:3-1/16", 4-1/16", 5-1/8", 7-1/16" Wp:10, 000psi, 15, 000psi Temperature:l u, pu Mat's:aa-ff psl:1-4 pr:1-2 Honorary certificate Our products have been iso9001 certified and attained api 6a, 6d, api 7, 7k, and api 16a&16c approvals of american pertroleum insitute.All products are fully designed and manufactured in accordance with api, ansi, gb(national standards)and sy(industry standards)standards.
Hydraulic actuator installed on the top of the bonnet which controls the open and close of the valve by hydraulic pressure Metal seal between the body and bonnet Backseat seal between the stem and the bonnet ,easy for the change of sealing stuff under pressure Sealing surface is hard-faced or the QBQ with the performance of anti-corrosion,wear-resistance Low operating torque End Connection: Flange,Thread,Union,BW Size:1 13/16- 7 1/16 Temperature:K. L .P. R .S. T. U. V Material:AA. BB. CC. DD. EE. FF PSL:PSL1-PSL3G PR:PR1. PR2 Pressure:2000-20000 PSI Application:Oil, Chemical industry, etc. Medium:Oil,Gas,Water,etc.
The LAKE DM Gate Valves are solid gate, rising stem, gate valves with resilient seals. They are purpose made for mud, cement, fracturing and water service and are easy to operate and simple to maintain. The DM Gate Valves with superior design features precision workmanship and a proven principle are engineered to meet the harsh drilling requirements in todayâ??s oilfield. DM Series Mud Gate Valves are designed and manufactured in accordance with the following specifications:- API 6A Specification for Wellhead and Christmas Tree Equipment. ANSI B31.3 Chemical Plant and Petroleum Refinery Piping. ASME VIII Boiler and Pressure Vessel Code. MSS-SP-55 Quality Standard for Steel Castings for Valve, Flanges and Fittings and Other Piping Components. NACE MR-01-75 Sulphide Stress Cracking Resistant Metallic Materials for Oilfield Equipment.
The LAKE DM Gate Valves are solid gate, rising stem, gate valves with resilient seals. They are purpose made for mud, cement, fracturing and water service and are easy to operate and simple to maintain. The DM Gate Valves with superior design features precision workmanship and a proven principle are engineered to meet the harsh drilling requirements in todays oilfield. DM Series Mud Gate Valves are designed and manufactured in accordance with the following specifications:- API 6A Specification for Wellhead and Christmas Tree Equipment. ANSI B31.3 Chemical Plant and Petroleum Refinery Piping. ASME VIII Boiler and Pressure Vessel Code. MSS-SP-55 Quality Standard for Steel Castings for Valve, Flanges and Fittings and Other Piping Components. NACE MR-01-75 Sulphide Stress Cracking Resistant Metallic Materials for Oilfield Equipment.
Products: API 6A Valves (FC Valve, Ballscrew Valve, Hydaulic Valve), API 6A valve parts(Gate, Seat, Stem, Body, Bonnet) Size:1 13/16 ¨C 7 1/16¡± Pressure: 3000PSI-15000PSI Material: AA-FF. Wood packing.
Gate valves can be interchanged with Cameron FC,FL series gate valve and fully in accordance with API Spec. 6A, made from modern materials and manufacturing techniques. They are robust, easy to maintain in ther field. Reasonable price and low cost of spares make them the most cost effective valve on the market. Reliable hydraulic gate valves are complied with API Spec. 6A also. Features òManufactured and Tested in Accordance with API.6A and supplied with Full Certification òSimple structure and renewable gate and seat assembly òForged body and bonnet òA True Bi-Directional Valve òGate to seat, seat to body, bonnet seal and stem backseat are metal to metal sealing òThe sealing surface of the gate and seat are hardfaced for wear and corrosion resistance. òGrease fitting in bonnet for easy lubrication òOne-piece and double-acting gate with long service life òBoth thrust bearings with large load capacity and composite rubber-plastic stem lip packing reduces operating torque òStem packing replaceable under full line pressure when valve is in closed position Available òNon-rising stem gate valve, rising stem gate valve and hydraulic gate valve. òMedium: oil, gas, slurry and sour gas òRated Working Pressure: 2,000psi ~ 20,000psi òBore Size: all popular òTemperature: K ~ U òMaterial Classes: BB ~ HH òEnd connections: flange, union òProduct Specification Level: PSL1 ~ PSL4 òPerformance Requirement: PR1, PR2
The hydraulic enema/ sausage machine is the main equipment for processing intestinal products, which can fill all kinds of large, medium and small intestinal products. The machine is driven by piston type hydraulic pressure. Under the action of the hydraulic cylinder, the materials in the cylinder will be squeezed out after the pressure is generated by adjusting the working pressure. The upper part of the machine is equipped with a storage hopper and butterfly valve, which can realize continuous filling without lifting the cover and improve the working efficiency
The hydraulic enema/ sausage stuffer machine / sausage filler machine is the main equipment for processing intestinal products, which can fill all kinds of large, medium and small intestinal products. The machine is driven by piston type hydraulic pressure. Under the action of the hydraulic cylinder, the materials in the cylinder will be squeezed out after the pressure is generated by adjusting the working pressure. The upper part of the machine is equipped with a storage hopper and butterfly valve, which can realize continuous filling without lifting the cover and improve the working efficiency. Capacity 150-300kg , 1.5kw .
Factory price vegetable current cleaning machine The whole production line are made SUS304 stainless steel ,with food safety standards.The use of high pressure bubble cleaning ,when the bubble is released in water,the material will be irregular strong turnover movement ,stirring effect .Effectively separate surface impurities to avoid damage to materials by touching ,knocking and scratching . Scope of application :clean vegetable processing ,central kitchen ,large dining canteen,catering chain ,food factory ,etc .
The whole production line are made SUS304 stainless steel ,with food safety standards.The use of high pressure bubble cleaning ,when the bubble is released in water,the material will be irregular strong turnover movement ,stirring effect .Effectively separate surface impurities to avoid damage to materials by touching ,knocking and scratching . Scope of application :clean vegetable processing ,central kitchen ,large dining canteen,catering chain ,food factory ,etc .
Factory Automatic Hot Eye Onion peeling process machine,from small capacity to big capacity Onion peeling process: the onion is manually fed into the hopper --- the conveyor belt automatically feeds the onion into the peeling box for peeling --- after peeling, the onion goes into the peeling roller. Under the action of high-pressure air at the side, the first and second layers of the onion are peeled off and sent out to complete the whole processing process. Features: 1. Advanced technology, reasonable mechanism, beautiful appearance, safe and reliable use, all stainless steel. 2. Automatic peeling without damage. 3. The depth of peeling is even. 4. The feeding belt is used for automatic feeding, which is simple in design and convenient in use. 5. Less peeling, high recovery rate of finished products, and over 98% of finished products. 6. Mechanical processing eliminates the hidden danger of manual processing of infectious diseases and unsanitary products. Parameters 1.process arrange diameter of round shape onion 30-150mm. 2.capacity 1000-1500kg/h 3.Power 3kw 4.Voltage 380V 5.Air Compressor :flow 1.5m2/min, pressure 0.7MPa ,power 11kw 6.Machine size 1.5*1.3*1.4m 7.Weight 420kg Start working flowing: 1.Fill onion in the loading box 2.Start the pneumatic valve switch 3.Start the power-supply switch 4.According to onion drying or fresh to adjust loading speed button/air pressure ,in order to ensure the clean degree of removing onion skin 5.When finished adjusting ,The equipment operates normally and automatically.
We supply fc&fl&fls&wkm valves with good quality and very competitive price. Hope to be a partner of your company! We supply different type of api 6a gate valve including fc&fl&fls, lu, aa-hh, psl1-3, pr1.Pr2. We offer you with a good quality and competitive price. Our fc gate valve is interchangeable with cameron model fc gate valve. Manufactured and tested in accordance with api spec 6a Forged steel body and bonnet A true bi-directional valve Low operating torque Quick release hand wheel Api spec 6a psl, 1, 2, 3 Material classes dd, ee, ff, to nace mr-01-75 Available from 5000 psi to 15, 000 psi in all full-bore sizes
We supply FC&FL&FLS&WKM Valves with good quality and very competitive price. Hope to be a partner of your company! we supply different type of API 6A gate valve including FC&FL&FLS,LU,AA-HH,PSL1-3,PR1.PR2. we offer you with a good quality and competitive price. Our FC GATE VALVE is interchangeable with Cameron Model FC Gate Valve. Manufactured and Tested in Accordance with API Spec 6A Forged Steel Body and Bonnet A True Bi-Directional Valve Low Operating Torque Quick Release Hand Wheel API Spec 6A PSL, 1, 2, 3 Material Classes DD, EE, FF, to NACE MR-01-75 Available from 5000 psi to 15,000 psi in all Full-Bore Sizes
This recertified Medical MD Oxygen Cylinder is perfect for professional or personal home oxygen use. With a 14.6 cu ft capacity,this medical oxygen cylinder is perfect for portability and smaller spaces. This lightweight, easy to transport aluminum requalified cylinder is DOT approved, and ready for medical or industrial use. It comes fitted with a CGA870 post valve installed and a freshly painted dome in a Medical Green color for easy identification. PREMIUM CONSTRUCTION Reconditioned High-quality aluminum body Clearcoat protected Medical green rust-resistant painted dome CGA870 medical post valve installed Approximately 4.4â?³ in diameter x 16.3â?³ in height* (with valve) Weighs approximately 6 pounds Capacity 14.6 cubic foot 2015 PSI service / 3360 PSI test pressure Stamped DOT-3AL2015 5-year retest interval Recertified test within 180 days prior to shipment
Features: Full Facepiece Respirator Large lens for wide field of view Lightweight, balanced design Silicone face seal for greater comfort and durability Characteristics Double exhalation valve; Low respiratory resistance; The transmission device design make the information transfer more clear Used Oil, Machine maintenance, Construction, Gas ,Electric power, Shipbuilding, Transport, Mine, Chemical plant, but not for radioactive high toxic particulate matter.
Function Gas mask Can prevent various organic gases, such as formaldehyde, gasoline, ether, suitable for spray paint, oil, machinery, polishing, dust and other workplaces A.The full face gas mask made by high grade silica gel, endure the aging , avoiding allergy, durable , easy to clean. B. Double-folded the silica gel structure enhanced air tightness and face fitness C. The dual headphone with adjustable straps design more comfortable to wear D. Push type and replaceable cartridge E. The unique audio device, allowing you to disseminate the messages more clear. F-Large valve disc breathing valve design,breathing resistance is small,let the wearer enjoy smooth breathing. G.Double filtration box filtration, double filtration area, low breathing resistance -The universal installation structure can be separately anti-virus or dust-free, and can be easily switched. -Military active carbon with large adsorption capacity and high Strength -Double filtration agent has long service life Half Face Gas Mask is composed of the body of mask, the cartridge, Inhale and exhale valves, headbands. -It is designed for painting and organic vapor protective (95% effectiveness) - The mask can be taken off and hanged on the neck during rest time. - Replacement parts available, filters sold separately.
The polyester staple fiber machine (PSF plant) takes virgin PET Chips, recycled Bottle Flakes, Popcorn and Lumps, etc., as raw material, with continuous drying (or batch drying through Vacuum Dryer), high pressure melt spinning process engineering and VFD controlled Spinning & Stretching process engineering to produce normal Staple Fibre, High Tenacity Low Elongation Staple Fibre and Hollow Fibre. Single plant capacity is 15T.P.D. to 80T.P.D. Equipment Technical Data Titer Range dtex 6.67-16.67 Spinning Pos. nos. 6-24 Spinning Pitch mm 700, 750 Plant Capacity TPD 15-80 Spinneret dia. mm 328, 358, 410 Spinning Mechanical Speed m/min 500-1,500 Spinning Processing Speed m/min 500-1,300 Stretching Mechanical Speed m/min 240 Stretching Processing Speed m/min 230 Total Tow Titer at Stretching dtex 600,000-3,000,000 Stuffer Box Width mm 160-410 Cutting Length mm 25, 32, 38, 44, 51, 64, 76, 101 Bale Weight kg 200-350 Application: Cushions Pillows Quilts Toys Jacket Mattress Non woven carpet Automotive felts, speaker felts, geo textiles, polyfill wadding, filter fabrics and other acoustics as well. Spinning Line: Continuous Dryer Hopper Screw Extruder Polymer Pipe Filter Spin Beam (Meter Pump System, Spin Pack, Spinneret) Quenching Unit Interfloor Duct Draw-off Wall Capstan Roller Sunflower Gearing Unit Automatic Fiber Can Device Drawing line: Can Creel Inlet Thread Guide Tow Guide Stand Dipping Bath 1st Draw Stand Draw Bath 2nd Draw Stand Draw Steam Chest 3rd Draw Stand Tow Stacker Crimper Steam Box Crimper Silicone Oil Sprayer Machine Tow Tension Stand Cutter Fiber Spreading Machine Relaxer Fiber Blowing system Baling Press
Silicone Foam Wound Dressing the silicone dressing is a highly absorbent dressing made from hydrophilic polyurethane foam, ideally designed for heavily exuding wounds. The soft flexible foam absorbs large amount drainage, ensures patients comfort; the top backing film protect wounds against external bacterial. It's a disposable sterile product,it consists of silicone gel and polyurethane foam ,it has high liquid absorptive volume, isolates the wound penetrent liquid from the wound effectively,and reduce the possibility that the wound is infected.The product can form and keep a moist environment,promote wound healing ,and reduce the second damage when changing the dressing. Information for Use: 1)clean the wound with saline. 2)dry skin around the wound, select the appropriate specification ( crop the product if necessary ). Cover the wound completely. 3)tear the face mask, Stick to the wound. 4)use the second dressing to fix (island). Applications: Pressure ulcer Leg venous ulcer Diabetic foot ulcer First and second degree burns Skin grafts and donor site Post-operative and traumatic wounds Advantages: high absorptive volume of liquid isolate the wound penetrent liquid from wound, reduce the infection heal without scab,reduce the scar promote wound healing
Silicone Foam Wound Dressing the silicone dressing is a highly absorbent dressing made from hydrophilic polyurethane foam, ideally designed for heavily exuding wounds. The soft flexible foam absorbs large amount drainage, ensures patients comfort; the top backing film protect wounds against external bacterial. It's a disposable sterile product,it consists of silicone gel and polyurethane foam ,it has high liquid absorptive volume, isolates the wound penetrent liquid from the wound effectively,and reduce the possibility that the wound is infected.The product can form and keep a moist environment,promote wound healing ,and reduce the second damage when changing the dressing. Information for Use: 1)clean the wound with saline. 2)dry skin around the wound, select the appropriate specification ( crop the product if necessary ). Cover the wound completely. 3)tear the face mask, Stick to the wound. 4)use the second dressing to fix (island). Applications: Pressure ulcer Leg venous ulcer Diabetic foot ulcer First and second degree burns Skin grafts and donor site Post-operative and traumatic wounds Advantages: high absorptive volume of liquid isolate the wound penetrent liquid from wound, reduce the infection heal without scab,reduce the scar promote wound healing
