Al-Mg Alloy Wire 5154 can be used for braiding and shielding in flexible coaxial cable, a variety of audio and video cable, vehicle signal cable, network cable, data transmission cables and so on. The Al Alloy Wire is also the raw material of Aluminum Insect Screening for window and door.
Pulu Group starts from Aluminum Alloy 5154 Wire years ago. Aluminum alloy 5154 wire offers excellent corrosion resistance even in extremely corrosive environments. The magnesium (3.5%) and chromium (0.25%) alloy further enhance its superior corrosion resistance. While it will lose strength subjected to high temperatures (390�°F / 199�°C to 480�°F / 249�°C), its strength can be increased via cold working (note: aluminum 5154 cannot be heat-treated).
What is the data of aluminum alloy wire 5154 for cable? 1. Conductivity above 36% ; 2. Aluminum grade: 5154; 3. Tensile strength: 230-450 mpa; 4. Elongation:7â??15%; 5. Diameter: 0.12-6.0 mm. Please contact us for more detailed specifications of Alu Alloy Wire 5154.
The raw materials used in all 0# zinc distillation zinc ingot quality, high purity zinc, the zinc content of more than 99.995%, the strict implementation of national standard gb/t470-2008;the raw material aluminum ingot all uses the high-quality aluminum ingot, the aluminum ingot purity is high, the aluminum content above 99.8%, strictly carries out the national standard, the remelting uses the aluminum ingot gb/t1196 - 2008
Characters
1. Zinc aluminum alloy coatings have similar stability with spraying aluminum coatings and the electrochemical protection as well as spraying zinc coating, zinc aluminum alloy coating is an ideal anticorrosion protective coating of sea water.
2. Compared with the zinc wire and pure aluminum wire, it's coating has coherence, the resistance to wear and corrosion resistivity is better as well as the construction of superior performance. The zinc aluminum alloy wire makes the sacrifice anode and sprays coating in the steel and iron component surface layerand it make the component service life lengthen 5-10 times
Zinc aluminum alloy wire is widely applied to thermal spraying anticorrosion, container, bridge, head frame, storage tank, electric iron tower, poles and towers, capacitor, metal bracket, nodular cast iron pipe, traffic equipments, etc.
The raw materials used in all 0# zinc distillation zinc ingot quality, high purity zinc, the zinc content of more than 99.995%, the strict implementation of national standard gb/t470-2008;the raw material aluminum ingot all uses the high-quality aluminum ingot, the aluminum ingot purity is high, the aluminum content above 99.8%, strictly carries out the national standard, the remelting uses the aluminum ingot gb/t1196 - 2008
Characters
1. Zinc aluminum alloy coatings have similar stability with spraying aluminum coatings and the electrochemical protection as well as spraying zinc coating, zinc aluminum alloy coating is an ideal anticorrosion protective coating of sea water.
2. Compared with the zinc wire and pure aluminum wire, it's coating has coherence, the resistance to wear and corrosion resistivity is better as well as the construction of superior performance. The zinc aluminum alloy wire makes the sacrifice anode and sprays coating in the steel and iron component surface layerand it make the component service life lengthen 5-10 times
Specification
Znal content :zn :84-86% al :14-15%
Diameter of zinc aluminum alloy wire :1.2-10mm
Package :bundle (20-100kg)spool/axle(20kg)barrel(50-250kg)
Applicable to ductile pipes, dockyard, power capacitors, power tower, tower, container, derrick, bridges gate, tunnel framework, metal stents, large steel structure surface thermal spraying zinc corrosion protection industry.
Application
Zinc aluminum alloy wire is widely applied to thermal spraying anticorrosion, container, bridge, head frame, storage tank, electric iron tower, poles and towers, capacitor, metal bracket, nodular cast iron pipe, traffic equipments, etc.
121093 Aluminum Alloy Wire Suppliers
Short on time? Let Aluminum Alloy Wire sellers contact you.
This is a kind of aluminum welding wire containing 0.05--0.2% copper and more than 90 aluminum.It has andvantages range over good corrosiveness, well electrical conductivity and processiveness. And it also is a kind of best choice for colour-match after anodic process.Recommended type aluminum alloy 1000
This is a type of product which can be adopt in the same grade of 2219 in aluminum alloy material welding due to its composition of copper is 5.8%--6.8% .
This is a type of aluminum alloys wires containing approximate 12% silicom, which can be adopted in welding all kinds of forging and casting or extruded shape aluminum alloys. And it has advantages of low melting point and good fluidity which avoides the distortion after welding
This is a type of product is a widely used in general welding material with the magnesium of 5%, which can be use in jointing oe overlay forging and casting alloys processing.And this product is of high toughness, good forgeability, and well anti-corrosiveness. Furthermore, this is a good chioce for colour-match in welding after anodic process.
Description:
The stainless steel tube is stranded by double or three layers of aluminum clad steel wires(ACS) or mix ACS wires and aluminum alloy wires.
Application: Aerial / ground (earth) wire.
NOTE:
1.Cables can be supplied with a range of single mode or multimode fibers.
2.Specially designed Cable structure is available on request.
3.Cables can be supplied with dry core or semi dry core
Our products are made to order to your specifications.
Need a quick quote,please send your requirement to our Email:selia@ksdcable.com
we will be in touch quickly.
Steel-cored aluminum alloy compound trolley wire:
This kind of conductive wire is made with the composite of wearproof aluminum alloy , pure aluminum and steel core . It has such characteristics as long as service life , high wearproof and corrosion-resisting performance , high tensile strength and toughness , safe , reliable , and convenient in construction ,etc . The product has been applied on the Fengzhun Coal ¡§C transportation railway.
1. Mainly used for melting ingot
2. Discontinuous melting with scrap
3. Easy control and operation
4. Fast melting
5. Energy saving This Scrap Aluminium is produced in the production of industrial waste. Such as: Scrap Aluminium Wire, Scrap Aluminium block and so on
6. It mainly used for drawing back non-ferrous metal typical material is: Wasted copper, aluminum, cable, aluminum stuff, wasted auto spare part, non-ferrous metal scrap, dross for printing, broken glass contains non-ferroous, electronic waste etc.
Our advantage: 1. We offer the most competitive prices. 2. We provide relevant professional product consulting. 3. We are willing to help customers find any potential products and merchandise. 4. You can visit our factory by yourself. Our success is inseparable from your support and making friends from all over the world in good faith. 5. Our aim is: integrity first; reputation first, best reputation; once cooperation, friends for a lifetime.
For more information about our product, please feel free to contact us.
Aluminum wire (Pure Aluminum Wire, Aluminum Line and Spray Finishing Aluminum Wire) ,The surface of aluminum wire is smooth and bright; no break of wire exists; single wire has no greasy dirt, burr, scratch or scar; there is no block of device in application.
The product adopts high quality aluminum ingot, no other substances enter the process from raw material (aluminum ingot) input to strip output, and the product is not exposed to other metal. The detection adopts DF-100 type direct-reading spectrometer, inductively coupled plasma atomic emission spectrum and other high-end testing instruments. Strict check and detection are conducted in the whole working procedures including raw material-wire output-big drawing-middle drawing-water tank-baling-storage. Not a tiny detail is neglected. Hence, the long-term stability of product performance is ensured. The content of each batch of aluminum wire is guaranteed to be above 99.7%.
Cable industry and thermal spraying, aluminum spraying and anticorrosion on the surface of capacitor, power tower, iron tower, container, derrick, bridges, sluice gate, tunnel framework, metal support, large steel structure and others.
Characters
1. The size and shape of spraying are insusceptible. Spraying can be conducted on the whole surface, or on a large defined surface, which is a convenient and economical method in coating the partial surface of a large unit.
2. The parent material doesnt change. For the heated temperature on parent material is low during spraying, the work piece only distorts slightly.
3. The thickness of coating varies in a large range, from several microns to several millimeters.
4. Spraying moulding is available. Thermal spraying technology can not only form a coating on the surface of material, but also be used to manufacture machinery parts, namely, spraying molding products.
Transportation & Storage: Wrap page and means of transportation with acid, alkali or salt that may corrode aluminum are forbidden. Aluminum segment should be stored in a dry and ventilated storeroom which is free of corrosive substance and be protected from rain.
Application
Aluminum wire is widely applied to thermal spraying anticorrosion, container, bridge, head frame, storage tank, electric iron tower, poles and towers, capacitor, metal bracket, nodular cast iron pipe, traffic equipments, etc.
121093 Aluminum Alloy Wire Suppliers
Short on time? Let Aluminum Alloy Wire sellers contact you.
